Mercurial > public > hwos_code
view src/text_german.inc @ 653:8bcd138ab744
add tools/o3pack.bat and the required tools/libs
author | heinrichsweikamp |
---|---|
date | Fri, 11 Aug 2023 15:53:49 +0200 |
parents | bc214815deb2 |
children | 75e90cd0c2c3 |
line wrap: on
line source
;============================================================================= ; ; File text_german.asm next combined generation V3.12.3 ; ; German texts translation file. ; ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. ;============================================================================= ; Basic texts TCODE tNo, "Nein" ; 0 No | Enum group TCODE tYes, "Ja" ; 1 Yes | IFDEF _cave_mode TCODE tOff, "Aus" ; OFF | Enum group TCODE tOn, "Ein" ; ON | ELSE TCODE tOff, " " ; needed for option table ENDIF TCODE tblank, " " ; (a single space character) ; Surface-mode texts TCODE tMenu, "<Menü" ; <Menu TCODE tView, "View>" ; View> TCODE tHeading, "Kurs:" ; Heading: TCODE tLastDive, "Letzter TG" ; Last Dive (Max 10 chars) TCODE tFTTSSurf, "fTTS/Verz.:" ; Future TTS TCODE tLastDecostopSurf, "Letzt.Stop:" ; last deco stop surface custom view TCODE tDvSalinitySurf, "Salinität :" ; Salinity IFDEF _external_sensor TCODE tSensorMilliVolt, "Sensoren mV" ; Sensors mV ENDIF ; Divemode Menu - 10 chars max! TCODE tDivemenu_Gaslist, "Gasliste" ; Gaslist (OC) TCODE tDivemenu_ResetAvg, "Stoppuhr" ; Reset Avg TCODE tDivemenu_Avg_Mkr, "Uhr/Marker" ; Reset Avg, Set Marker (and Turn Dive) TCODE tDivemenu_ToggleGF, "Toggle GF" ; Toggle GF TCODE tDivemenu_Marker, "Markierung" ; Set Marker TCODE tDivemenu_LostGas, "Gasverlust" ; Lost Gas IFDEF _ccr_pscr TCODE tDivemenu_Diluent, "Diluents" ; Diluent (CCR) TCODE tDivemenu_Premix, "Premix" ; Premix (pSCR) TCODE tDivemenu_Setpoint, "Setpoint" ; Setpoint ENDIF IFDEF _external_sensor TCODE tDivemenu_UseSensor,"akt.Sensor" ; Use Sensor ENDIF IFDEF _cave_mode TCODE tDivePreCave, "Höhle" ; Enter Cave Menu ( 5 chars max) TCODE tDivemenu_wp_set, "Wegepunkt" ; Set Waypoint (10 chars max) TCODE tDivemenu_wp_out, "gehe <-()" ; go one Waypoint outwards (10 chars max) TCODE tDivemenu_wp_in, "gehe ->()" ; go one Waypoint inwards (10 chars max) TCODE tDivemenu_TurnDive, "Rückweg" ; Turn Dive (10 chars max) TCODE tDivemenu_ContDive, "Fortsetzen" ; Continue Dive (10 chars max) TCODE tDivemenu_off_on, "Aus / Ein" ; Cave Mode Off/On (10 chars max) ENDIF ; Main menu TCODE tNext, "<Weiter" ; <Next TCODE tEnter, " Enter>" ; Enter> TCODE tMainMenu, "Hauptmenü" ; MainMenu TCODE tLogbook, "Logbuch" ; Logbook TCODE tGasSetup, "OC Gas Setup" ; OC Gas Setup TCODE tSetTime, "Zeit einstellen" ; Set Time TCODE tSetDate, "Datum einstellen" ; Set Date TCODE tSetTimeDate, "Datum & Uhrzeit" ; Time & Date TCODE tDispSets, "Anzeige" ; Display Settings TCODE tSysSets, "System" ; System Settings TCODE tExit, "Ende" ; Exit TCODE tResetMenu, "Reset Menü" ; Reset Menu TCODE tDiveModeMenu, "TG-Einstellungen" ; Dive Setup TCODE tDiveSetup, "Tauchgang" ; Dive Setup TCODE tDecoSetup, "Dekompression" ; Deco Setup TCODE tSACSetup, "AMV Einstellung" ; SAC Setup TCODE tppO2Setup, "O2 Partialdruck" ; ppO2 Setup TCODE tStopsSetup, "Stopps & Tiefen" ; Stops & Depths TCODE tInfoMenu, "Informationen" ; Information IFDEF _ccr_pscr TCODE tCCRSetup, "CCR/pSCR Setup" ; CCR/pSCR Setup TCODE tDiluentSetup, "Diluent Menü" ; Diluent Setup ENDIF TCODE tFixedSetpoints, "CCR Setpoints" ; Fixed Setpoints TCODE tBack, "zurück" ; back TCODE tGas6, "Extra-Gas" ; edit & select Gas 6 IFDEF _rx_functions TCODE tTrSettings, "Druckanzeige" ; Pressure Display TCODE tTrMode, "Modus: " ; Mode TCODE tTr1stPres, "1.Druck: " ; 1st Pressure TCODE tTr2ndPres, "2.Druck: " ; 2nd Pressure TCODE tTrBailPres, "1.B/O : " ; Bailout Pressure TCODE tTrMaxDeltaP, "max Diff.: " ; independent double max difference ENDIF IFDEF _external_sensor ; TCODE tCCRSensor, "Sensor" ; CCR/pSCR Sensor TCODE tCalibrateMenu, "Kalibrierung" ; Calibration TCODE tCalibrationGas, "Kal. Gas O2:" ; Cal. Gas O2: TCODE tCalibrate, "Kalibrieren" ; Calibrate TCODE tS8Mode, "S8 Eingang:" ; Sensor Input TCODE tCCRS8Mode, "Analog" ; Analog TCODE tCCRS8Mode2, "Digital" ; Digital ELSE TCODE tCCRS8Mode, " " ; needed for option table ENDIF ; Gas menu TCODE tGaslist, "OC Gas Liste" TCODE tGaslistCC, "CC Gas Liste" ; CC Diluents TCODE tGasEdit, "Gas einstellen" TCODE tType, "Typ: " TCODE tGasDisabled, "Deaktiviert" ; | ENUM 1: Disabled TCODE tGasFirst, "Start" ; | 2: First TCODE tGasTravel, "Arbeit" ; | 3: Work (Travel, Bottom) TCODE tGasDeco, "Deko" ; | 4: Deco TCODE tAir, "Air " ; | ENUM: values must follow (5 chars) TCODE tO2, "O2 " ; | tAir + 5 TCODE tO2Plus, "O2 +" TCODE tO2Minus, "O2 -" IFDEF _helium TCODE tHePlus, "He +" TCODE tHeMinus, "He -" ENDIF TCODE tMOD, "MOD :" TCODE tEAD, "EAD:" TCODE tSetup_GasDepth, "Wechseltiefe" TCODE tDepthPlus, "Tiefe +" TCODE tDepthMinus, "Tiefe -" TCODE tDepthReset, "Reset auf MOD:" TCODE tSetup_GasMix, "Mix einstellen" IFDEF _ccr_pscr TCODE tSPPlus, "ppO2 +" ; Setpoint ppO2 + TCODE tSensorFallback, "Fallback:" ; Fallback: TCODE tCalculated, "berechnet" ; calculated TCODE tppO2O2, "ppO2(O2)" ; ppO2(O2) TCODE tppO2Dil, "ppO2(Dil)" ; ppO2(Dil) TCODE tppO2Mix, "ppO2(Mix)" ; ppO2(Mix) TCODE tCCRMode, "Modus: " ; CCR/pSCR Mode TCODE tCCRModeFixedSP, "FesterSP" ; 0 fixed for CCR / calculated for pSCR | ENUM group TCODE tCCRModeSensor, "Sensor" ; 1 Sensor | TCODE tCCRModeAutoSP, "Auto SP" ; 2 Auto SP | ELSE TCODE tCCRModeFixedSP, " " ; target needed by option table ENDIF TCODE tSP, "SP" ; SP (SetPoint) ; New batteries menu ; 1 2 ; ; 12345678901234567890 ; max 20 chars TCODE tNewBattTitle, "Neue Batterie?" TCODE tNewBattOld, "behalte alte" TCODE tNewBattNew36, "3,6V Einweg (T1)" ; new 3.6V disposable TCODE tNewBattNew15, "1,5V Einweg (T0)" ; new 1.5V disposable TCODE tNewBattAccu, "3,7V aufladbar (T2)" ; new 3.7V rechargeable TCODE tNew18650, "OSTC 2(2015), cR(T3)" ; internal battery on 2 (old) / cR TCODE tNew16650, "OSTC 2(2017), TR(T4)" ; internal battery on 2 (new) / TR TCODE tConfirmChargeable1,"Bestätigung:" ; safety question, line 1 TCODE tConfirmChargeable2,"eingelegte Batterie" ; safety question, line 2 TCODE tConfirmChargeable3,"ist wiederaufladbar" ; safety question, line 3 ; Gaslist management TCODE tGas, "Gas" ; Gas TCODE tDil, "Dil" ; Diluent TCODE tGasErr, "Err" ; Err (max 3 chars) TCODE tTakeGas, "nimm" ; take gas (max 4 chars) ; Communication Menu TCODE tUsbTitle, "USB Modus" TCODE tBleTitle, "Bluetooth Modus" TCODE tUsbStarting, "Starte..." TCODE tUsbStartDone, "Fertig." TCODE tUsbServiceMode, "Servicemodus aktiv" TCODE tUsbClosed, "Abgebrochen" TCODE tUsbExit, "Beendet" TCODE tUsbDownloadMode, "Downloadmodus aktiv" TCODE tUsbLlBld, "Low-Level Bootloader" ; Dive Settings TCODE tDvMode, "Betriebsart : " ; Dive Mode IFDEF _cave_mode TCODE tCvMode, "Höhlenmodus : " ; Cave Mode ENDIF TCODE tFTTSMenu, "fTTS/Verz. : " ; Future TTS TCODE tTimeoutDive, "TG-Ende nach: " ; Dive Timeout TCODE tStoreApnoeDive, "Log Apnoe : " ; Store Apnoe Dives TCODE tWarningLevel, "Warnstufe: " ; Warning level TCODE tLess, "Weniger" ; Less TCODE tFull, "Alle" ; Full TCODE tDvOC, "OC" ; 0 | keep order, enum! TCODE tDvCCR, "CCR" ; 1 | TCODE tDvGauge, "Gauge" ; 2 | TCODE tDvApnea, "Apnoe" ; 3 | TCODE tDvPSCR, "pSCR" ; 4 | TCODE tDvCC, "CC" TCODE tDkMode, "Decotyp: ZH-L16" TCODE tZHL16, " " ; keep order, enum from here... TCODE tZHL16GF, "+GF" ; ...up to here! TCODE tPPO2Max, "Max. Arbeit:" TCODE tPPO2DECO, "Max. Deko :" IFDEF _ccr_pscr TCODE tPPO2MIN, "Min. OC :" TCODE tPPO2MINCC, "Min. Loop :" ELSE TCODE tPPO2MIN, "Min. :" ENDIF TCODE tDecoparameters, "Deko Parameter" TCODE tGF_low, "GF low :" TCODE tGF_high, "GF high:" TCODE tSaturationMult, "Sättigung : " TCODE tDesaturationMult, "Entsättigung: " TCODE tGFMenu, "GF Parameter" ; GF Settings TCODE tSDMenu, "SD Parameter" ; SD Settings TCODE taGF_low, "aGF low :" ; aGF low TCODE taGF_high, "aGF high:" ; aGF high TCODE taGFenable, "aGF wählbar:" ; aGF Selectable TCODE tDiveaGF_active, "aGF aktiv" ; using aGF TCODE tSafetyStop, "Sicherheitsstop:" ; Safety Stop: (max. 16 chars) TCODE tExtendedStops, "erweit. Stopps :" ; Extended Stops TCODE tLastDecostop, "Letzt.Stop : " ; last Deco Stop Depth TCODE tDvSalinity, "Salinität : " ; Salinity TCODE tDepthWarn, "Tiefenlimit:" ; Depth Warning (no space after ':' on purpose) TCODE tGasUsage, "Gasbedarf" ; Gas Usage TCODE tSetWorkSAC, "Arbeits AMV:" ; SAC Work: TCODE tSetDecoSAC, "Deko AMV:" ; SAC Deco: TCODE tCalcGasNeeds, "Gasmenge(B/O): " ; Calculate Gas (Bail Out) Needs IFDEF _gas_contingency TCODE tGasContingencyDive,"Swap on empty: " ; swap tank on becoming empty ENDIF TCODE tGasChangeTime, "Gaswechselzeit:+" ; additional Gas Change Time TCODE tSetup_Tank, "Flasche" ; Setup Tank TCODE tTankSize, "Flaschengröße:" ; Tank Size TCODE tTankUsablePress, "Umkehrdruck: " ; Tank Pressure Budget for Ascent (turn pressure) TCODE tLiter, " l" ; Liter as l TCODE tLiterLong, "Liter" ; Liter as Liter TCODE t2ndDecoPlanMenu, "2.Deko Plan" ; 2nd Deco Plan IFDEF _ccr_pscr TCODE tCCmaxFracO2, "Loop %O2 max. : " ; max O2 percent (absolute) in the loop TCODE tDilppO2Check, "Prüfe Dil ppO2: " ; check ppO2 of the diluent against the setpoint TCODE tGasDensityCheck, ".. Gasdichte: " ; check Gas Density TCODE tPSCR_O2_drop, "pSCR O2 Abfall: " ; pSCR O2 Drop TCODE tPSCR_lungratio, ".. Lungenverh.: " ; pSCR Lung Ratio TCODE tCopyDilToOC, "Kopiere Dil.-> OC" ; copy diluent settings to OC gas TCODE tBackToLoop, "auf Loop" ; back to loop (10 chars max) ENDIF IFDEF _rx_functions TCODE tTankPairing, "Sender wählen" ; select Transmitter TCODE tTrModeOff, "aus" ; off TCODE tTrModeOn, "ein" ; on TCODE tTrModeIndDouble, "unabh.Doppel" ; independent double TCODE tTrModeCCR, "CCR Dil+O2" ; CCR diluent and O2 TCODE tTrPresNone, "keiner" ; none (big enum group follows) TCODE tTrPresGas1, "Gas 1" ; Gas 1 TCODE tTrPresGas2, "Gas 2" ; Gas 2 TCODE tTrPresGas3, "Gas 3" ; Gas 3 TCODE tTrPresGas4, "Gas 4" ; Gas 4 TCODE tTrPresGas5, "Gas 5" ; Gas 5 IFDEF _ccr_pscr TCODE tTrPresDil1, "Dil 1" ; Dil 1 TCODE tTrPresDil2, "Dil 2" ; Dil 2 TCODE tTrPresDil3, "Dil 3" ; Dil 3 TCODE tTrPresDil4, "Dil 4" ; Dil 4 TCODE tTrPresDil5, "Dil 5" ; Dil 5 TCODE tTrPresFirstGas, "erstes Gas" ; first Gas TCODE tTrPresActiveGas, "aktives Gas" ; active Gas TCODE tTrPresFirstDil, "erstes Dil" ; first Dil TCODE tTrPresActiveDil, "aktives Dil" ; active Dil ENDIF ELSE TCODE tTrModeOff, "" ; dummy target for entry in option table TCODE tTrPresNone, "" ; dummy target for entry in option table ENDIF ; _rx_functions ; Display Settings TCODE tBright, "Helligkeit" ; Brightness TCODE tBrightDive, "Tauchmodus:" ; Dive Mode TCODE tBrightSurface, "Oberfläche:" ; ...Surface TCODE tUseAmbientSensor, "Nutze Sensor:" ; Use light sensor TCODE tLayout, "Layout : " ; Layout TCODE tUnits, "Einheiten : " ; Units IF _language_2!=none TCODE tLanguage, "Sprache : " ; Language ENDIF TCODE tFlip, "Anzeige drehen: " ; Rotate Screen TCODE tColorScheme, "Farbschema" ; Colour Scheme TCODE tVSIgraph, "Geschw.Grafik: " ; Speed Graph TCODE tVSItext2, "... adaptiv: " ; variable Speed TCODE tShowppO2, "ppO2 immer : " ; always show ppO2 TCODE tDepthWarning, "Tiefe blinken: " ; Depth blinking TCODE t2ndDepth, "2.Tiefe: " ; 2nd Depth Display Content (11 chars max) TCODE tTissueGraphics, "Grafik : " ; Tissue Graphics TCODE tIBCDwarning, "IBCD Warnung: " ; IBCD warning TCODE tEco, "Eco" ; eco | ENUM group TCODE tMedium, "Mittel" ; medium | TCODE tHigh, "Hoch" ; high | TCODE tLayoutNormal, "normal" ; normal | ENUM group TCODE tLayoutBig, "groß" ; big | TCODE tMax, "max." ; max | ENUM group TCODE tAvg, "mittel" ; average | TCODE tTissuePresSat, "Druck+Sat." ; pressure and saturation | ENUM group IFDEF _helium TCODE tTissueN2He, "N2+He" ; N2 + He pressure | ENDIF ; Setup Menu TCODE tSystSets, "Konfiguration" ; System Settings IFDEF _compass TCODE tCompassMenu, "Kompass" ; Compass TCODE tCompassCalibration,"Kalibrierung" ; Calibration TCODE tCompassGain, "Empfindlichkeit:" ; Compass gain: TCODE tCalX, "Kal. X" ; Cal X TCODE tCalY, "Kal. Y" ; Cal Y TCODE tCalZ, "Kal. Z" ; Cal Z ENDIF TCODE tMetric, " m/°C" ; Enum menu TCODE tImperial, "ft/°F" ; 111 111 111 111 111 ; 5 rows by 12 chars each: 123456789012123456789012123456789012123456789012123456789012 TCODE tDefName, "HW OSTC" TCODE tPiezo, "Taster" ; Buttons TCODE tButtonExplain1, "Weniger % ist" ; Less % is TCODE tButtonExplain2, "empfindlicher." ; more sensitive. TCODE tButtonleft, "Taster links :" ; Left button TCODE tButtonright, "Taster rechts:" ; Right button TCODE tAltMode, "Wartezeit:" TCODE tAltModeFly, "Fliegen" TCODE tAltMode1000, "1000m" TCODE tAltMode2000, "2000m" TCODE tAltMode3000, "3000m" ; Units for all menu TCODE tMeters, "m" TCODE tFeets, "ft" TCODE tFeets1, "f" TCODE tMinutes, "'" TCODE tPercent, "%" TCODE tLitersMinute, "l/min" TCODE tbar, " bar" ; bar TCODE tbar10, "0 bar" ; xx0 bar TCODE tMeterMinute, "m/'" ; meter per minute ; Date TCODE tDateFormat, "Format: " TCODE tDateformat, "MMTTJJ" TCODE tDateformat1, "TTMMJJ" TCODE tDateformat2, "JJMMTT" ; Simulator menu TCODE tInter, "Start Simulator" ; Start Simulator TCODE tSimulator, "Simulator" ; Simulator ; Decoplanner submenu TCODE tBtTm, "Grundzeit : " ; Bot. Time: (10 chars) TCODE tBtTm_short, "Zeit :" ; Bot. Time: (max. 6 chars) TCODE tBtDep, "Tiefe : " ; Max Depth: (10 chars) TCODE tIntvl, "Intervall : " ; Interval : (10 chars) TCODE tCalculatorSetup, "Deko Parameter" ; Calculator Setup TCODE tDeco, "Deko Berechnung" ; Calculate Deco TCODE tDivePlan, "Tauchplan" ; Dive Plan (max. 10 chars) TCODE tNoDeco, "Keine Deko" ; No Deco TCODE tMore, "mehr" ; More TCODE tSelectSetpoint, "Setpoint : " TCODE tuseAGF, "Benutze aGF: " IFDEF _gas_contingency TCODE tGasContingencySim, "Gas Cont. : " ; Gas Contingency ## translation pending ENDIF ; Decoplanner progress indication TCODE tNoBottomGas1, " kein auf der Tiefe" ; no usable Gas for Bottom Depth found (line 1, max. 22 chars) ## pending translation TCODE tNoBottomGas2, "nutzbares Gas gefunden"; no usable Gas for Bottom Depth found (line 2, max. 22 chars) ## pending translation TCODE tCalculating, "Berechnung läuft..." TCODE tCalcSurfInter, "Oberflächenpause" ; Surface Interval TCODE tCalcBotSeg, "Grundzeit" ; Bottom Segment TCODE tCalcBailout, "Wechsel auf Bailout" ; Switch to Bailout TCODE tCalcAscent, "Aufstieg" ; Ascent (max. 8 chars) TCODE tNDLleft, "übrig" ; time left within NDL ; Information menu TCODE tFirmware, "Firmware: " ; Firmware: (space) TCODE tFirmwareDate, "erstellt: " ; created : (space) firmware creation date TCODE tHardware, "Hardware: " ; Hardware: (space) TCODE tSerial, "Seriennr: " ; Serial : (space) TCODE tBatteryV, "Batterie: " ; Battery : (space) TCODE tSensorC, "Sensor : " ; Sensor : (space) TCODE tSensorD, "Offset : " ; Offset : (space) TCODE tUptime, "Laufzeit: " ; Uptime: IFDEF _rx_functions TCODE tFirmware_rx, "RX Ver : " ; RX Ver : (space) ENDIF ; Divemode screen TCODE tNDL, " NZ" ; 3 chars TCODE tTTS, "TTS" ; 3 chars TCODE tSlow, "langsam" ; slow - max 7 chars TCODE tVelMetric, "m/min" TCODE tVelImperial, "ft/m " TCODE tGasSelect, "Wähle Gas" ; Select Gas TCODE tSelectAir, "Luft" ; Air TCODE tSelectO2, "O2 " ; O2 TCODE tSelectNx, "Nx" ; Nx TCODE tSelectTx, "Tx" ; Tx TCODE tDepth, "Tiefe" ; Depth (max 5 chars) TCODE tMaxDepth, "Max.Tiefe" ; Max.Depth - max 9 chars! TCODE tAvgDepth, "Durchschn." ; average Depth - max 9 chars! (extra dot is ok) TCODE tDivetime, "Dauer" ; Divetime (max 8 chars) TCODE tDiveTotalAvg, "Durchschn.1" TCODE tDiveStopwatch, "Stoppuhr" TCODE tDiveStopAvg, "Durchschn.2" ; 11 chars max TCODE tApnoeTotal, " Total" ; Total (six chars, right aligned) TCODE tApnoeMax, " Letzter TG" ; Last descend TCODE tApnoeSurface, "Oberfläche" ; Surface Time TCODE tTime, "Uhrzeit" ; Time TCODE tSurface, "Oberfläche" ; Surface (max 12 chars) TCODE tDiveDecoplan, "nächste Stopps" ; next Stops ; TCODE tDiveClock, "Uhr" ; Clock TCODE tDiveEAD_END, "EAD/END" ; EAD/END TCODE tDiveTissues, "Gewebe" ; Tissues TCODE tEND, "END:" ; END: TCODE tN2, "N2" ; N2 TCODE tDiveBailout, "Bailout" ; Bailout (max. 7 chars) TCODE tGFactors, "GF Werte" ; GF Values TCODE taGFactors, "aGF Werte" ; aGF Values TCODE tGFInfo, "Sättigung" ; Saturation TCODE tCeiling, "Ceiling" ; Ceiling TCODE tDiveFallback, "Fallback!" ; Fallback! (max. nine chars) TCODE tDecoInfo, "Deko Zone" ; Deco info TCODE tSensorCheck, "Sensor Test" ; Sensor Check TCODE tdil, "Dil:" ; Diluent ppO2 Warning TCODE tmix, "Mix:" ; Pre-Mix ppO2 Warning TCODE tGasNeedsWarn, "Gasbedarf" ; TCODE tCNSsurf, "ZNS Oberfl." ; TCODE tCNSfTTS, "ZNS fTTS" ; TCODE tCNSBO, "ZNS B/O" ; TCODE tCNSnow, "ZNS jetzt" ; TCODE tCNSeod, "ZNS Ende" ; IFDEF _cave_mode TCODE tCNScave, "ZNS Höhle" ; ENDIF TCODE tnoBOgas, "-B/O-Gas-" ; TCODE tMicroBubbles, "M.Blasen" ; TCODE tCNS, "ZNS: " ; TCODE tgaschange, "wechseln?" ; better gas found TCODE tNeed, "Bedf." ; gas need (5 chars) TCODE tBattery, "Batterie" ; Battery TCODE tSAT, "Sät:" ; Sat: (max 4 chars) TCODE tppO2, "ppO2:" ; ppO2: (max 5 chars) IFDEF _helium TCODE tHe, "He" ; He TCODE tIBCD, "IBCD N2He" ; IBCD warning (max. 9 chars) ENDIF IFDEF _ccr_pscr TCODE tGasDensity, "Gasdichte" ; Gas Density (max. 9 chars) ENDIF IFDEF _rx_functions TCODE tTransmitter, "TR Sender" ; pressure transmitter TCODE tPressure, "Fl.Druck" ; tank pressure TCODE tSAC, "AMV" ; SAC, must be 3 chars! TCODE tswap, "wechseln" ; switch tank (max. 9 chars) ENDIF IFDEF _external_sensor TCODE tDiveHudMask1, "Sensor 1" TCODE tDiveHudMask2, "Sensor 2" TCODE tDiveHudMask3, "Sensor 3" TCODE tSensorDisagree, "Sensoren!" ; Sensors disagree Warning ENDIF IFDEF _cave_mode TCODE tGasNeedsCaveMode, "Gasbedarf -HÖHLE- " ; title for gas needs custom view (cave mode) | need to be TCODE tGasNeedsAscent, "Gasbedarf Aufstieg" ; title for gas needs custom view (open water mode) | same length TCODE tCaveMode, "Höhle" ; cave mode activated (max. 9 char) TCODE tCaveModeShutdown, "X-Höhle-X" ; cave mode shut down (max. 9 char) TCODE tCaveTTS, "Cave TTS" ; cave mode total time to surface TCODE tCaveStops, "total Stops" ; cave mode total time for stops TCODE tCaveRuntime, "total RT" ; cave mode total runtime ELSE TCODE tGasNeedsAscent, "Gasbedarf Aufstieg" ; title for gas needs custom view ENDIF ; Divemode menu TCODE tDiveAckn, "Best?" ; Ackn? (max. 5 chars) TCODE tDivePreMenu, "Menü?" ; Menu? (max. 5 chars) TCODE tDiveLayout, "Layout" ; Layout (max. 6 chars) IFDEF _compass TCODE tSetHeading, "Kurs" ; Course (max. 6 chars) ENDIF ; Simulator menu TCODE tQuitSim, "Ende" ; Quit Simulation (max. 6 chars) TCODE tResetAvg, "Reset" ; Reset Timer (max. 6 chars) ; Logbook TCODE tCNS2, "ZNS:" TCODE tAVG, "Mit:" TCODE tGF2, "GF :" TCODE tSD2, "S/D: " TCODE tDvSalinity2, "Salinität :" ; max 11 chars TCODE tLastDeco, "Letzt.Stop:" ; max 11 chars TCODE tNoProfileData, "keine Daten mehr..." ; max 21 chars TCODE tBeginOfDive, "Beginn:" ; max 8 chars TCODE tEndOfDive, "Ende:" ; max 8 chars TCODE tDesatTime, "Desat:" ; amx 8 chars ; other useser TCODE tGF, "GF:" ; GF Factors (3 chars) TCODE tSD, "S/D" ; Saturation / Desaturation (3 chars) ; Logbook units TCODE tLogTunitC, "°C" TCODE tLogTunitF, "°F" TCODE tKGL, "kg/l" TCODE tMBAR, "hPa" ; Logbook menu TCODE tNextLog, "Nächste Seite" ; Reset menu IFDEF _firmware_recovery TCODE tReboot, "Neustart/Backup" ; Reboot/Backup ELSE TCODE tReboot, "Neu starten" ; Reboot ENDIF TCODE tResetMenu2, "Sind Sie sicher?" ; Are you sure? TCODE tAbort, "Abbrechen" ; Abort TCODE tResetSettings, "Reset Einstellungen" ; Reset Settings (max. 19 chars) TCODE tResetDeco, "Reset Deko" ; Reset Deco TCODE tResetBattery, "neue Batterie" ; Reset Battery TCODE tResetLogbook, "Logbuch löschen" ; Reset Logbook TCODE tResetBLE2, "Reset Bluetooth" ; Reset Bluetooth IFDEF _firmware_recovery TCODE tRebootCurFirmware, "Reboot aktuelle FW" ; Reboot current Firmware TCODE tBackupFirmware, "Backup aktuelle FW" ; Backup current Firmware TCODE tRecoverFirmware, "lade " ; Recover (version will be appended) TCODE tBackingUp, "Sicherung läuft..." ; backing up current firmware TCODE tRestoring, "Wiederherstellung..." ; restoring backup firmware ENDIF ; Set Time Menu/Set Date Menu TCODE tSetHours, "Stunden einst." ; Set Hours TCODE tSetMinutes, "Minuten einst." ; Set Minutes TCODE tSetSeconds, "Sekunden zurücks." ; Clear seconds TCODE tSetDay, "Setze Tag" ; Set Day TCODE tSetMonth, "Setze Monat" ; Set Month TCODE tSetYear, "Setze Jahr" ; Set Year ; Logbook Offset Menu TCODE tTotalDives, "Anzahl TG: " ; Total Dives TCODE tLogOffset, "Logbuch-Offset" ; Logbook offset TCODE tLogOffsetValue, "Offset : " ; Offset TCODE tLogOffStepSize, "Schrittweite: " ; Step Size TCODE tLogOffsetplus, "+" ; increment TCODE tLogOffsetminus, "-" ; decrement TCODE tLogOffStep1, " 1" ; adjustment step size 1 | ENUM group TCODE tLogOffStep10, " 10" ; adjustment step size 10 | TCODE tLogOffStep100, " 100" ; adjustment step size 100 | TCODE tLogOffStep1000, "1000" ; adjustment step size 1000 | ; Compass directions TCODE tN, "N " ; N(orth), 338°-22° TCODE tNE, "NO" ; North-East, 23°-67° TCODE tE, "O " ; E(east), 68°-112° TCODE tSE, "SO" ; South-East, 113°-157° TCODE tS, "S " ; S(outh), 157°-202° TCODE tSW, "SW" ; South-West, 203°-247° TCODE tW, "W " ; W(West), 248°-292° TCODE tNW, "NW" ; North-West, 293°-337° ; Color Scheme menu TCODE tColorSetDive, "Tauchmodus:" ; Divemode: TCODE tColorSetName0, "Standard" ; Standard TCODE tColorSetName1, "Rot" ; Red TCODE tColorSetName2, "Grün" ; Green TCODE tColorSetName3, "Blau" ; Blue ; Debug Stuff IFDEF _comm_debug TCODE tCommTimeout, "RX Timeout: " TCODE tCommTimeoutU, "0 ms" ENDIF ; Language selection IF _language_1==en TCODE tLang1, "EN" ; tLang1 is 1st language, enum context ELSE IF _language_1==de TCODE tLang1, "DE" ELSE IF _language_1==fr TCODE tLang1, "FR" ELSE IF _language_1==it TCODE tLang1, "IT" ELSE TCODE tLang1, "" ; dummy target for options table ENDIF ENDIF ENDIF ENDIF IF _language_2==en TCODE tLang2, "EN" ; tLang2 is 2nd language, enum context ELSE IF _language_2==de TCODE tLang2, "DE" ELSE IF _language_2==fr TCODE tLang2, "FR" ELSE IF _language_2==it TCODE tLang2, "IT" ENDIF ENDIF ENDIF ENDIF