;=============================================================================
;
;   File compass_ops.asm											## V2.99e
;
;   Compass Operations
;
;   Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved.
;=============================================================================

#include	"hwos.inc"
#include	"i2c.inc"
#include	"tft_outputs.inc"
#include	"isr.inc"
#include	"tft.inc"
#include	"strings.inc"
#include	"wait.inc"					; speed_*
#include	"surfmode.inc"
#include	"divemode.inc"
#include	"math.inc"
#include	"convert.inc"


; Make sure symbols from the .inc are available to the C code:
	; Filtered data
	global	compass_DX_f
	global	compass_DY_f
	global	compass_DZ_f

	global	accel_DX_f
	global	accel_DY_f
	global	accel_DZ_f

	; Calibration data
	global	compass_CX_f
	global	compass_CY_f
	global	compass_CZ_f

	; Tmp values to pass Q15 arithmetics around
	global	compass_a
	global	compass_b

	; Result
	global compass_heading
;	global compass_roll
;	global compass_pitch


	extern	compass
	extern	compass_reset_calibration
	extern	compass_add_calibration
	extern	compass_solve_calibration
	extern	menu_processor_bottom_line
	extern	option_save_all
	extern	compass


compass_ops code

;=============================================================================

;-----------------------------------------------------------------------------
; Filter compass values
;
; Apply linear filtering to input parameters.

; Apply filtering formula: reg_f += (reg - reg_f) / 4
FILTER16	MACRO	reg, reg_f
	movf	reg_f+0,W
	subwf	reg+0,W
	movwf	PRODL
	movf	reg_f+1,W
	subwfb	reg+1,W
	rcall	filter_16_common
	addwf	reg_f+0,F
	movf	PRODH,W
	addwfc	reg_f+1,F
	ENDM

filter_16_common:
	movwf	PRODH
	bcf		STATUS,C					; Copy sign bit into carry
	btfsc	PRODH,7
	bsf		STATUS,C
	rrcf	PRODH,F						; 16bit shift right
	rrcf	PRODL,F
	bcf		STATUS,C					; Copy sign bit into carry
	btfsc	PRODH,7
	bsf		STATUS,C
	rrcf	PRODH,F						; 16bit shift right
	rrcf	PRODL,W
	return

	global	compass_filter
compass_filter:
	banksel	compass_DX
	FILTER16 compass_DX, compass_DX_f
	FILTER16 compass_DY, compass_DY_f
	FILTER16 compass_DZ, compass_DZ_f
	FILTER16 accel_DX,   accel_DX_f
	FILTER16 accel_DY,   accel_DY_f
	FILTER16 accel_DZ,   accel_DZ_f
	banksel	common
	return

;-----------------------------------------------------------------------------

compass_filter_init:
	movff	compass_DX+0, compass_DX_f+0
	movff	compass_DX+1, compass_DX_f+1
	movff	compass_DY+0, compass_DY_f+0
	movff	compass_DY+1, compass_DY_f+1
	movff	compass_DZ+0, compass_DZ_f+0
	movff	compass_DZ+1, compass_DZ_f+1
	movff	accel_DX+0,   accel_DX_f+0
	movff	accel_DX+1,   accel_DX_f+1
	movff	accel_DY+0,   accel_DY_f+0
	movff	accel_DY+1,   accel_DY_f+1
	movff	accel_DZ+0,   accel_DZ_f+0
	movff	accel_DZ+1,   accel_DZ_f+1
	return

;-----------------------------------------------------------------------------
; Q15 fractional numbers: a * b / 2**16 (UNSIGNED)
;
; Uses 16x16->16 multiply, for positiv integers, keeping only the most
; revelant bits.
;
; Used to multiply two Q15 numbers, in the range 0..1,
; represented as 0..32767, that is a / 2**15.
;
; (a/2**15) * (b/2**15) = a*b / 2**30 = (a*b/2**16) / 2**14.
; So to get back a Q15 number, we need a shift-left...
	global	compass_umul
compass_umul:
	rcall	compass_mul_16

; The 2x time, by left-shifting inserting the missing bit:
compass_mul_2:
	rlcf	compass_r+2,F				; Missing bit into carry
	rlcf	compass_r+0,F
	rlcf	compass_r+1,F
	movff	compass_r+0,PRODL			; return value into ProdH:L
	movff	compass_r+1,PRODH
	return

; The 16x16-> multiply:
compass_mul_16:
	banksel compass_a

	movf	compass_a+1,W				; Block ah*bh
	mulwf	compass_b+1
	movff	PRODL,compass_r+0			; and copy
	movff	PRODH,compass_r+1

	movf	compass_a+0,W				; Block al*bl
	mulwf   compass_b+0
	movff   PRODH,compass_r+2			; Into fraction byte

	movf	compass_a+1,W				; Block ah*bl
	mulwf	compass_b+0
	movf	PRODL,W
	addwf	compass_r+2,F				; Fraction part to carry.
	movf	PRODH,W						; and add16
	addwfc	compass_r+0,F
	movlw	0
	addwfc  compass_r+1,F

	movf	compass_a+0,W				; Block al*bh
	mulwf	compass_b+1
	movf	PRODL,W
	addwf	compass_r+2,F				; Fraction part to carry.
	movf	PRODH,W						; and add16
	addwfc	compass_r+0,F
	movlw	0
	addwfc	compass_r+1,F

	return

;-----------------------------------------------------------------------------
; Q15 fractional numbers: a * b / 2**16 (SIGNED)

	global	compass_imul
compass_imul:
	rcall	compass_mul_16

	btfss	compass_b+1,7
	bra		compass_mul_3

	movf	compass_a+0,W
	subwf	compass_r+0,F
	movf	compass_a+1,W
	subwfb	compass_r+1,F

compass_mul_3:
	btfss	compass_a+1,7
	bra		compass_mul_4

	movf	compass_b+0,W
	subwf	compass_r+0,F
	movf	compass_b+1,W
	subwfb  compass_r+1,F

compass_mul_4:
	bcf		compass_r+1,6				; Copy bit 7 to 6, so keep it after 2x
	btfsc	compass_r+1,7
	bsf		compass_r+1,6
	bra		compass_mul_2

	global	compass_calibration_loop
compass_calibration_loop:				; Compass calibration
	bsf		no_sensor_int				; No Sensor ISR
	call	I2C_sleep_accelerometer		; Stop accelerometer
	call	I2C_sleep_compass			; Stop compass
	call	TFT_ClearScreen
	; Mask
	WIN_COLOR color_greenish
	WIN_SMALL .16,.0
	STRCPY_TEXT_PRINT tCompassMenu
	btfss	switch_right2				; wait until button is released
	bra		$-4

	call	TFT_standard_color
;	WIN_SMALL .0,.215
;	STRCPY_TEXT_PRINT tExit
	WAITMS	d'255'
	WAITMS	d'255'

	movlw	.7							; Gain init
	movff	WREG,opt_compass_gain
compass_calibration_gainset:			; Reduce the gain, set bank here!
	banksel	opt_compass_gain
	decf	opt_compass_gain,F			; Reduce by one
	btfsc	STATUS,N					; <0?
	clrf	opt_compass_gain			; Yes, keep at zero

	banksel	common
	call	I2C_init_accelerometer
	call	I2C_init_compass

;	btfsc	compass_type				; compass1?
;	bra	compass_calibration_loop1		; Yes, skip gain stuff

	rcall	TFT_compass_show_gain		; show the current compass gain

	WAITMS	d'250'
	WAITMS	d'250'						; wait for first reading...

	clrf	timeout_counter2
;	clrf	timeout_counter3			; not used / required [rl]

	call	speed_fastest
	call	I2C_RX_compass				; read compass
	call	I2C_RX_accelerometer		; read Accelerometer

	; Test all axes for +4096 (Hi byte=16)
	banksel	compass_DX+1
	movlw	.16
	cpfseq	compass_DX+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DY+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DZ+1
	bra		$+4
	bra		compass_calibration_gainset

	; Test all axes for -4096 (Hi byte=240)
	movlw	.240
	cpfseq	compass_DX+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DY+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DZ+1
	bra		$+4
	bra		compass_calibration_gainset
	banksel	common

compass_calibration_loop1:				; Done with Gain
	rcall	compass_filter_init			; set DX_f values
	call	compass_reset_calibration	; Reset CX_f values
	banksel	common

compass_calibration_loop2:
	call	I2C_RX_compass				; read compass
	call	I2C_RX_accelerometer		; Test Accelerometer
	rcall	compass_filter				; Filter compass raw data
	banksel	common

	; Twice
	call	I2C_RX_compass				; read compass
	call	I2C_RX_accelerometer		; Test Accelerometer
	rcall	compass_filter				; Filter compass raw data
	banksel	common

;	btfsc	compass_type				; compass1?
;	bra		compass_calibration_loop3	; Yes, skip gain stuff

	; Test all axes for +4096 (Hi byte=16)
	banksel	compass_DX+1
	movlw	.16
	cpfseq	compass_DX+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DY+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DZ+1
	bra		$+4
	bra		compass_calibration_gainset

	; Test all axes for -4096 (Hi byte=240)
	movlw	.240
	cpfseq	compass_DX+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DY+1
	bra		$+4
	bra		compass_calibration_gainset
	cpfseq	compass_DZ+1
	bra		$+4
	bra		compass_calibration_gainset
	banksel	common
;
;	; Three
;	call	I2C_RX_compass				; read compass
;	call	I2C_RX_accelerometer		; Test Accelerometer
;	call	compass_filter				; Filter compass raw data
;	banksel	common
;
;	; Four times to get cleaner values
;	call	I2C_RX_compass				; read compass
;	call	I2C_RX_accelerometer		; Test Accelerometer
;	call	compass_filter				; Filter compass raw data

compass_calibration_loop3:
	; And register only one value out of four:
	call	compass_add_calibration		; check and store new max/min values
	banksel	common

	rcall	TFT_compass_fast			; show values

	btfsc	sleepmode					; Sleepmode active?
	bra		compass_calibration_exit	; Yes, exit


	btfss	onesecupdate				; do every second tasks?
	bra		compass_calibration_loop2	; no, loop here

	movlw	.60
	call	timeout_testmode			; check timeout
	movlw	.60
	rcall	TFT_show_timeout_testmode	; Show the timeout

	bcf		onesecupdate				; clear flag

	bra		compass_calibration_loop2	; loop here

compass_calibration_exit:
	call	compass_solve_calibration
	banksel	common
	; Done.
	call	option_save_all				; save all settings into EEPROM
	bcf		sleepmode					; Clear the flag before exiting to surface mode
	movlw	.6
	movff	WREG,customview_surfmode	; Set to compass view...
	goto	surfloop					; ...and exit

	global	TFT_compass_fast
TFT_compass_fast:
	WIN_TINY	.20,.50
	STRCPY	"X:"
	movff	compass_DX+0,lo
	movff	compass_DX+1,hi
	call	TFT_convert_signed_16bit	; converts lo:hi into signed-short and adds '-' to POSTINC2 if required
	output_16
	STRCAT	" Y:"
	movff	compass_DY+0,lo
	movff	compass_DY+1,hi
	call	TFT_convert_signed_16bit	; converts lo:hi into signed-short and adds '-' to POSTINC2 if required
	output_16
	STRCAT	" Z:"
	movff	compass_DZ+0,lo
	movff	compass_DZ+1,hi
	call	TFT_convert_signed_16bit	; converts lo:hi into signed-short and adds '-' to POSTINC2 if required
	output_16
	STRCAT_PRINT "  "
	return

TFT_show_timeout_testmode:				; With timeout in WREG...
	movwf	hi
	WIN_TINY .20,.68
	STRCPY	"T:"
	movf	timeout_counter2,W			; current timeout
	subwf	hi,W						; subtract from timeout value
	addlw	.1							; +1
	movwf	lo
	bsf		leftbind
	output_8							; Display timeout
	bcf		leftbind
	STRCAT_PRINT "s "
	return

TFT_compass_show_gain:					; Show the current compass gain
;	movff	opt_compass_gain,lo			; 0-7 (230LSB/Gauss to 1370LSB/Gaus)
;	tstfsz	lo
;	return								; Do not show unless gain=0
	WIN_TINY .20,.86
	STRCPY_TEXT tCompassGain
	movff	opt_compass_gain,lo			; 0-7 (230LSB/Gauss to 1370LSB/Gaus)
	bsf		leftbind
	output_8
	bcf		leftbind
	STRCAT_PRINT ""
	return

TFT_surface_compass_bearing:
	WIN_SMALL surf_compass_bear_column,surf_compass_bear_row
	movff	compass_bearing+0,lo
	movff	compass_bearing+1,hi
	PUTC	"("
	bsf	leftbind
	output_16dp .2						; Result is "0.000"
	bcf		leftbind
	; rearrange figures to "000"
	movff	buffer+3,buffer+1
	movff	buffer+4,buffer+2
	movff	buffer+5,buffer+3
	lfsr	FSR2,buffer+4
	STRCAT	"° "
	rcall	tft_compass_cardinal		; Add cardinal and ordinal to POSTINC2
	STRCAT_PRINT ")"
	return

	global	TFT_surface_compass_mask
TFT_surface_compass_mask:
	WIN_SMALL surf_compass_mask_column,surf_compass_mask_row
	call	TFT_standard_color
	STRCPY_TEXT_PRINT tHeading			; Heading:
	return

	global	TFT_dive_compass_mask
TFT_dive_compass_mask:
	WIN_FRAME_STD dm_custom_compass_graph_row, dm_custom_compass_graph_row+dm_custom_compass_graph_height, .0, .159
	return

	global	TFT_surface_compass_heading
TFT_surface_compass_heading:
	rcall	compass_heading_common
	WIN_STD	surf_compass_head_column,surf_compass_head_row
	call	TFT_standard_color
TFT_surface_compass_heading_com:		; Show "000° N"
	movff	compass_heading+0,lo
	movff	compass_heading+1,hi
	call	TFT_convert_signed_16bit	; converts lo:hi into signed-short and adds '-' to POSTINC2 if required

	; Shown and actual identical?
	movff	compass_heading_shown+0,WREG
	cpfseq	lo
	bra		TFT_surface_compass_heading_com1	; Not equal
	movff	compass_heading_shown+1,WREG
	cpfseq	hi
	bra		TFT_surface_compass_heading_com1	; Not equal
	bra		TFT_surface_compass_heading_com3	; equal, skip smoothing

TFT_surface_compass_heading_com1:
	movff	lo,sub_a+0
	movff	hi,sub_a+1
	movff	compass_heading_shown+0,sub_b+0
	movff	compass_heading_shown+1,sub_b+1
	call	subU16
	btfsc   neg_flag
	bra	TFT_surface_compass_heading_com2	; shown > actual
	; shown < actual
	banksel compass_heading_shown
	infsnz  compass_heading_shown+0,F
	incf	compass_heading_shown+1,F		; +1
	bra	TFT_surface_compass_heading_com3

TFT_surface_compass_heading_com2:
	banksel	compass_heading_shown
	movlw	d'1'
	subwf	compass_heading_shown+0,F
	movlw	d'0'
	subwfb	compass_heading_shown+1,F		; -1

TFT_surface_compass_heading_com3:
	banksel	common
	movff	compass_heading_shown+0,lo
	movff	compass_heading_shown+1,hi
	bsf		leftbind
	output_16dp .2						; Result is "0.000"
	bcf		leftbind
	; rearrange figures to "000"
	movff	buffer+2,buffer+0
	movff	buffer+3,buffer+1
	movff	buffer+4,buffer+2
	lfsr	FSR2,buffer+3
	STRCAT	"° "
	rcall	tft_compass_cardinal		; Add cardinal and ordinal to POSTINC2
	clrf	WREG
	movff	WREG,buffer+.7				; limit to 7 chars
	STRCAT_PRINT ""

	btfsc	divemode
	return								; Done for divemode
	; Show bearing on the surface?
	btfss	compass_bearing_set
	return								; No, return
	btfsc	premenu						; "Bearing?" shown?
	return								; Yes, return
	bra		TFT_surface_compass_bearing

	global	TFT_dive_compass_heading
TFT_dive_compass_heading:
	rcall	compass_heading_common
;	; ToDo - these are for development only, hard-coding the bearing position
;	; 244° : SW - W
;	movlw	low(d'244')
;	movff	WREG,compass_bearing+0
;	movlw	high(d'244')
;	movff	WREG,compass_bearing+1

	movff	compass_heading_shown+0,xA+0
	movff	compass_heading_shown+1,xA+1
	; xRD and xRDlft
	; 1.  160° viewing angle: +360 offset if xA<=292; for non-negative scale
	movlw	high(d'292')
	movff	WREG,sub_a+1
	movlw	low(d'292')
	movff	WREG,sub_a+0
	movff	xA+1,sub_b+1
	movff	xA+0,sub_b+0
	call	subU16						; sub_c = sub_a - sub_b
	btfsc	neg_flag					; xA > 292 ?
	bra		TFT_dive_compass_heading_1	; yes
	; no, xA<=292
	movlw	high(d'360')
	addwf	xA+1,1
	movlw	low(d'360')
	addwf	xA+0,1
	btfsc	STATUS,C
	incf	xA+1
TFT_dive_compass_heading_1:
	; 2. -80: left pixel offset from the center
	movlw	low( d'80' )
	subwf	xA+0,1
	btfss	STATUS,C
	decf	xA+1
	; 3. save it to xRD
	movff	xA+0,xRD+0
	movff	xA+1,xRD+1
	; 4. add 160 (display px width)
	movlw	high(d'160')
	addwf	xA+1,1
	movlw	low(d'160')
	addwf	xA+0,1
	btfsc	STATUS,C
	incf	xA+1
	; 5. save it to xRDr
	movff	xA+0,xRDr+0
	movff	xA+1,xRDr+1

	btfss	compass_bearing_set
	bra		TFT_dive_compass_ruler		; no value in the bearing, skip calc

	; we have bearing set, we will need xRD180 calculated
	; xRD180  is xRDr-180
	movff	xRDr+1,sub_a+1
	movff	xRDr+0,sub_a+0
	movlw	high(d'180')
	movff	WREG,sub_b+1
	movlw	low(d'180')
	movff	WREG,sub_b+0
	call	subU16						; sub_c = sub_a - sub_b
	movff	sub_c+1,xRD180+1
	movff	sub_c+0,xRD180+0

TFT_dive_compass_bearing_1:
	; calculate bearing position and visibility (ahead or behind)
	bcf		compass_bearing_vis			; default is not-visibly
	bcf		compass_bearing_ahd			; default is behind
	; get the bearing virtual display offset, store it to divA
	movff	compass_bearing+0,xA+0
	movff	compass_bearing+1,xA+1
	movlw	high(d'360')
	addwf	xA+1,1
	movlw	low(d'360')
	addwf	xA+0,1
	btfsc	STATUS,C
	incf	xA+1
	; save it to reuse for upper/lower turns and ahead/behind checks
	movff	xA+1,divA+1
	movff	xA+0,divA+0

	; check if it's ahead
	; load the bearing offset into sub_a
	movff	divA+1,sub_a+1
	movff	divA+0,sub_a+0
	; load the display offset back to sub_b
	movff	xRD+0,sub_b+0
	movff	xRD+1,sub_b+1
	rcall	TFT_dive_compass_bearing_ap
	;test if we found it
	btfsc	compass_bearing_vis
	bra		TFT_dive_compass_bearing_dir

	; check if it's ahead with an upper turn
	; load the bearing offset into sub_a
	movff	divA+1,sub_a+1
	movff	divA+0,sub_a+0
	; load the display offset back to sub_b
	movff	xRD+0,sub_b+0
	movff	xRD+1,sub_b+1
	movlw	high(d'360')
	addwf	sub_b+1,1
	movlw	low(d'360')
	addwf	sub_b+0,1
	btfsc	STATUS,C
	incf	sub_b+1
	rcall	TFT_dive_compass_bearing_ap
	;test if we found it
	btfsc	compass_bearing_vis
	bra		TFT_dive_compass_bearing_dir

	; check if it's ahead with a lower turn
	; load the bearing offset into sub_a
	movff	divA+1,sub_a+1
	movff	divA+0,sub_a+0
	movlw	high(d'360')
	addwf	sub_a+1,1
	movlw	low(d'360')
	addwf	sub_a+0,1
	btfsc	STATUS,C
	incf	sub_a+1
	; load the display offset back to sub_b
	movff	xRD+0,sub_b+0
	movff	xRD+1,sub_b+1
	rcall	TFT_dive_compass_bearing_ap
	;test if we found it
	btfsc	compass_bearing_vis
	bra		TFT_dive_compass_bearing_dir

	; marker is not ahead of us, check if it's behind us
	; use the (160 - (xRD180 - xCM)) formula to see if it's on the display
	; load the display offset back to sub_a
	movff	xRD180+0,sub_a+0
	movff	xRD180+1,sub_a+1
	; load the marker's offset into sub_b
	movff	divA+0,sub_b+0
	movff	divA+1,sub_b+1
	rcall	TFT_dive_compass_bearing_bp
	;test if we found it
	btfsc	compass_bearing_vis
	bra		TFT_dive_compass_bearing_dir

	;check if it's behind with the lower turn
	movff	xRD180+0,sub_a+0
	movff	xRD180+1,sub_a+1
	movlw	high(d'360')
	addwf	sub_a+1,1
	movlw	low(d'360')
	addwf	sub_a+0,1
	btfsc	STATUS,C
	incf	sub_a+1
	; load the marker's offset into sub_b
	movff	divA+0,sub_b+0
	movff	divA+1,sub_b+1
	rcall	TFT_dive_compass_bearing_bp
	;test if we found it
	btfsc	compass_bearing_vis
	bra		TFT_dive_compass_bearing_dir

	; check if it's behind with the upper turn
	movff	divA+1,sub_b+1
	movff	divA+0,sub_b+0
	movlw	high(d'360')
	addwf	sub_b+1,1
	movlw	low(d'360')
	addwf	sub_b+0,1
	btfsc	STATUS,C
	incf	sub_b+1
	rcall	TFT_dive_compass_bearing_bp
	bra		TFT_dive_compass_bearing_dir

TFT_dive_compass_bearing_ap:
	; xCM received in sub_a
	; xRD received in sub_b
	; 1/a. check if it's viewable from the left side
	call	subU16						; sub_c = sub_a - sub_b
	btfsc	neg_flag	; xRD>divA
	return								; no
	; yes, store the RO=RP-RD for drawing
	movff	sub_c+0,xC+0
	movff	sub_c+1,xC+1
	; 1/b. check if it's viewable from the right side?
	movlw	d'2'						; avoid thin mess on the side of the display
	addwf	sub_a+0,1
	btfsc	STATUS, C
	incf	sub_a+1
	; load the display offset right side into sub_b
	movlw	high(d'158')
	addwf	sub_b+1,1
	movlw	low(d'158')
	addwf	sub_b+0,1
	btfsc	STATUS,C
	incf	sub_b+1
	call	subU16						; sub_c = sub_a - sub_b
	btfss	neg_flag					; xRDr > xA(+2) ?
	return								; no
	; print the bearing lines on the screen
	movff	xC+0,xCM
	bsf		compass_bearing_vis			; set visible
	bsf		compass_bearing_ahd			; set ahead
	return								; done,

TFT_dive_compass_bearing_bp:
	; use the (160 - (xRD180 - xCM)) formula to see if it's on the display
	; the marker's offset received in sub_b
	; the xRD180 display offset received in sub_a
	; xRD180 - xCM
	call	subU16						; sub_c = sub_a - sub_b
	btfsc	neg_flag					; CM > xRD180 ?
	return								; no, not on screen
	; 160 - (X)
	movlw	high(d'158')
	movff	WREG,sub_a+1
	movlw	low(d'158')
	movff	WREG,sub_a+0
	movff	sub_c+1,sub_b+1
	movff	sub_c+0,sub_b+0
	call	subU16						; sub_c = sub_a - sub_b
	btfsc	neg_flag	; X>160
	return								; no, not on screen
	; check if not overflow - this sounds a double check...
	movlw	d'1'
	cpfslt	sub_c+1
	return								; high set, >160
	movlw	d'158'
	cpfslt	sub_c+0
	return								; low >160
	; print the bearing lines on the screen
	movff	sub_c+0,xCM
	bsf		compass_bearing_vis
	return								; done

TFT_dive_compass_bearing_dir:
	; check if bearing to heading, and calculate the direction
	bcf		compass_bearing_eq
	btfss	compass_bearing_vis
	bra		TFT_dive_compass_bearing_lr
	btfss	compass_bearing_ahd
	bra		TFT_dive_compass_bearing_lr
	movff	xCM,xA+0
	movlw	d'80'
	cpfseq	xA+0
	bra		TFT_dive_compass_bearing_lr
	bsf		compass_bearing_eq
	bra		TFT_dive_compass_ruler		; bearing points to heading, no signs are required, go to the ruler

TFT_dive_compass_bearing_lr:
	; get the bearing virtual display offset
	movff	compass_bearing+0,xA+0
	movff	compass_bearing+1,xA+1
	; divA =IF (U10>292;U10;U10+360)
	movlw	high(d'292')
	movff	WREG,sub_a+1
	movlw	low(d'292')
	movff	WREG,sub_a+0
	movff	xA+1,sub_b+1
	movff	xA+0,sub_b+0
	call	subU16						; sub_c = sub_a - sub_b
	btfsc	neg_flag					; xA > 292 ?
	bra		TFT_dive_compass_bearing_lr_1 ; yes
	; no, xA <= 292
	movlw	high(d'360')
	addwf	xA+1,1
	movlw	low(d'360')
	addwf	xA+0,1
	btfsc	STATUS,C
	incf	xA+1
TFT_dive_compass_bearing_lr_1:
	; 1. calculate whether bearing is to left or to right
	bsf	compass_bearing_lft   ; to the left by default
	; xC: save center value to compare the direction to front value
	movff	xA+1,xC+1
	movff	xA+0,xC+0
	; xB: we need the left side for comparison... left = -180
	movff	xA+1,sub_a+1
	movff	xA+0,sub_a+0
	movlw	high(d'180')
	movff	WREG,sub_b+1
	movlw	low(d'180')
	movff	WREG,sub_b+0
	call	subU16						; sub_c = sub_a - sub_b
	movff	sub_c+1,xB+1				; xB has the left side of the 180° distance center
	movff	sub_c+0,xB+0
	; xA = IF(xRD>(xC+100);xRD-280;xRD+80)
	movff	xC+1,sub_a+1
	movff	xC+0,sub_a+0
	movlw	d'100'
	addwf	sub_a+0,1
	btfsc	STATUS,C
	incf	sub_a+1
	movff	xRD+1,sub_b+1
	movff	xRD+0,sub_b+0
	call	subU16						;  sub_c = sub_a - sub_b
	btfsc	neg_flag	; xRD>xC+100
	bra		TFT_dive_compass_bearing_lr_2 ; yes, xA=xRD-280
	; no, xA = xRD+80
	movff	xRD+1,xA+1
	movff	xRD+0,xA+0
	movlw	d'80'
	addwf	xA+0,1
	btfsc	STATUS,C
	incf	xA+1
	bra		TFT_dive_compass_bearing_lr_c

TFT_dive_compass_bearing_lr_2:
	; xA=xRD-280
	movff	xRD+1,sub_a+1
	movff	xRD+0,sub_a+0
	movlw	high(d'280')
	movff	WREG,sub_b+1
	movlw	low(d'280')
	movff	WREG,sub_b+0
	call	subU16						; sub_c = sub_a - sub_b
	movff	sub_c+1,xA+1
	movff	sub_c+0,xA+0
	;bra	TFT_dive_compass_bearing_lr_c

TFT_dive_compass_bearing_lr_c:
	; xB < xA < xC => right, otherwise left (default)
	movff	xA+1,sub_b+1
	movff	xA+0,sub_b+0
	movff	xB+1,sub_a+1
	movff	xB+0,sub_a+0
	call	subU16						; sub_c = sub_a - sub_b
	btfss	neg_flag					; xA>xB ?
	bra		TFT_dive_compass_ruler		; No, xB >= xA, keep default left
	movff	xA+1,sub_a+1
	movff	xA+0,sub_a+0
	movff	xC+1,sub_b+1
	movff	xC+0,sub_b+0
	call	subU16						; sub_c = sub_a - sub_b
	btfss	neg_flag					; xC>xA ?
	bra		TFT_dive_compass_ruler		; No, xA >= xC, keep default left
	bcf		compass_bearing_lft

TFT_dive_compass_ruler:
	; calculate mod15 for the ticks
	movff	xRD+0,xA+0
	movff	xRD+1,xA+1
	movlw	d'15'
	movwf	xB+0
	clrf	xB+1
	call	div16x16					; xA/xB=xC with xA+0 as remainder
	; check xA+0, it has the remainder
	movlw	d'0'
	cpfsgt	xA+0						; mod15 > 0
	bra	TFT_dive_compass_ruler_1		; no, RM = 0
	; yes RM = 15 - RDmod15
	movlw	d'15'
	subfwb	xA+0,1
TFT_dive_compass_ruler_1:
	; xA+0 holds the RM, store it to 'lo'
	movff	xA+0,lo
	; init DD to zero, store it to 'hi'
	clrf	hi

TFT_dive_compass_ruler_loop:
	; 1. check if we run of from the display
	movlw	d'159'						; Looks like 159 works because TFT_box limits the display
	cpfslt	lo,1
	bra		TFT_dive_compass_ruler_lend	; xRM >= W
	; 2. Clear the tick area from DD to RM - in segments to avoid blinking
	;    don't do a clear if we are at 0 (zero) otherwise it will blink
	;    because of the width underflow
	movlw	d'0'
	cpfsgt	lo,1
	bra		TFT_dive_compass_ruler_loop_zz
	rcall	TFT_dive_compass_clr_ruler
TFT_dive_compass_ruler_loop_zz:
	; 3. Draw the markers @ RM
	;    we receive RM in lo and DD in hi
	movlw	dm_custom_compass_tick_top_top
	movwf	win_top
	movlw	dm_custom_compass_tick_height
	movwf	win_height
	movlw	d'2'
	movwf	win_width+0
	clrf	win_width+1
	movwf   win_bargraph
	movff   lo,win_leftx2				; 0..159
	call	TFT_standard_color
	call	TFT_box
	movlw	dm_custom_compass_tick_bot_top
	movwf	win_top
	movlw	dm_custom_compass_tick_height
	movwf	win_height
	call	TFT_standard_color			; color in WREG is trashed, must be set again!
	call	TFT_box
	; 4. If D<82 and RM>79: means we put something over the center line
	;	redraw the center line
	movlw	d'82'
	cpfslt	hi,1
	bra		TFT_dive_compass_ruler_loop_zz2
	movlw	d'79'
	cpfsgt	lo,1
	bra		TFT_dive_compass_ruler_loop_zz2
	; enough to print cline as bearing marker is not in the ticker area
	movlw	color_yellow
	WIN_BOX_COLOR dm_custom_compass_tick_top_top, dm_custom_compass_tick_bot_bot,.80,.81 ; center line in yellow
TFT_dive_compass_ruler_loop_zz2:
	; 5. set D = RM + 2 : position after the 2px tick
	movff	lo,hi
	movlw	d'2'
	addwf	hi,F
	; 6. set RM = RM + 15 : position to the next tick
	movlw	d'15'
	addwf	lo,F
	; 7. loop
	bra		TFT_dive_compass_ruler_loop

TFT_dive_compass_ruler_lend:			; loop end
	; 8. clear the rest of the tick area if D<160
	movlw	d'160'
	cpfslt	hi
	bra		TFT_dive_compass_ruler_lend2 ; D >= W
	; 9. position left to end of display to clear the remaining area
	movlw	d'159'
	movwf	lo
	; 10. clear it
	rcall	TFT_dive_compass_clr_ruler

TFT_dive_compass_ruler_lend2:
	; done with the compass ruler, put the labels on the screen
	; get the RD abck to sub_b
	movff	xRD+0,sub_b+0
	movff	xRD+1,sub_b+1
	; hi stores the display position
	clrf	hi
	movff	hi,xHI
	; lo stores the last item's display position
	clrf	lo
	movff	lo,xLO

	movlw	low( d'219' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'219' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_1
	STRCPY_TEXT_PRINT	tSW				; yes - print it
dcr_1:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'267' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'267' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_2
	STRCPY_TEXT_PRINT tW				; yes - print it
dcr_2:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'309' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'309' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_3
	STRCPY_TEXT_PRINT tNW				; yes - print it
dcr_3:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'358' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'358' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_4
	STRCPY_TEXT_PRINT tN				; yes - print it
dcr_4:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'399' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'399' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_5
	STRCPY_TEXT_PRINT tNE				; yes - print it
dcr_5:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'448' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'448' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_6
	STRCPY_TEXT_PRINT	tE				; yes - print it
dcr_6:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'489' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'489' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_7
	STRCPY_TEXT_PRINT	tSE				; yes - print it
dcr_7:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'538' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'538' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_8
	STRCPY_TEXT_PRINT tS				; yes - print it
dcr_8:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'579' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'579' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_9
	STRCPY_TEXT_PRINT tSW				; yes - print it
dcr_9:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'627' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'627' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_10
	STRCPY_TEXT_PRINT tW				; yes - print it
dcr_10:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	movlw	low( d'669' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'669' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_11
	STRCPY_TEXT_PRINT tNW				; yes - print it
dcr_11:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker

	movlw	low( d'718' )				; position of the label
	movwf	sub_a+0
	movlw	high( d'718' )
	rcall	TFT_dive_compass_label_proc	; check if the label should be on screen
	btfss	print_compass_label			; Yes?
	bra		dcr_12
	STRCPY_TEXT_PRINT tN				; yes - print it
dcr_12:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker

TFT_dive_compass_label_end:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	; restore lo and hi for the final cleanup
	movff	xLO,lo
	movff	xHI,hi
	; clear the rest of the SQ area if there are more space
	movlw	d'159'
	cpfslt	hi
	bra		TFT_dive_compass_label_end2	; D >= 160, no more space
	; position left to end of display to clear the remaining area
	movlw	d'158'
	movwf	lo
	; clear it
	rcall	TFT_dive_compass_clr_label
TFT_dive_compass_label_end2:
	rcall	TFT_dive_compass_c_mk		; check if label is on the center line or the marker
	; do we have bearing set?
	btfsc	compass_bearing_set
	bra		TFT_dive_compass_dir_text	; bearing_set=1 - go and print the dir (<< or >>)
	rcall	TFT_dive_compass_dir_lclr	; no, clear the area (e.g. we had but removed)
	rcall	TFT_dive_compass_dir_rclr
	bra		TFT_dive_compass_text

TFT_dive_compass_dir_text:
	; bearing set, but does it point to heading?
	btfss	compass_bearing_eq
	bra		TFT_dive_compass_dir_text_2	; bearing != heading - go and print the dir
	rcall	TFT_dive_compass_dir_lclr	; bearing = heading, no need for direction markers
	rcall	TFT_dive_compass_dir_rclr
	bra		TFT_dive_compass_text

TFT_dive_compass_dir_text_2:
	movlw	color_green
	call	TFT_set_color
	btfsc	compass_bearing_lft
	bra		TFT_dive_compass_dir_ldir	; bearing_lft=1, print the left marker
;TFT_dive_compass_text_rdir:
	WIN_SMALL dm_custom_compass_rdir_column, dm_custom_compass_head_row-.2
	STRCPY_PRINT ">>"
	; do not forget to clear the left
	rcall	TFT_dive_compass_dir_lclr
	bra		TFT_dive_compass_text

TFT_dive_compass_dir_ldir:
	WIN_SMALL dm_custom_compass_ldir_column, dm_custom_compass_head_row-.2
	STRCPY_PRINT "<<"
	; do not forget to clear the right
	rcall	TFT_dive_compass_dir_rclr
	;bra	TFT_dive_compass_text

TFT_dive_compass_text:
	; Clear some unused space on the right mH
	WIN_BOX_BLACK dm_custom_compass_tick_top_bot+.1,dm_custom_compass_tick_bot_top-.1,.158,.159	; top, bottom, left, right

	; Text output
	call	TFT_standard_color
	WIN_SMALL dm_custom_compass_head_column, dm_custom_compass_head_row
	rcall	TFT_surface_compass_heading_com  ; Show "000° N"
	return

TFT_dive_compass_dir_lclr:
	WIN_SMALL dm_custom_compass_ldir_column, dm_custom_compass_head_row-.2
	STRCPY_PRINT "  "
	return

TFT_dive_compass_dir_rclr:
	WIN_SMALL dm_custom_compass_rdir_column, dm_custom_compass_head_row-.2
	STRCPY_PRINT "  "
	return

TFT_dive_compass_label_proc:
	movwf	sub_a+1
	movlw	d'14'
	movwf	up							; cardinal width in px
	bcf	print_compass_label
	; 1/a. check if it's viewable ? sub_a(RP) >= sub_b(RD) ?
	;      set the carry flag if sub_b(xRD) is equal to or greater than sub_a(xRP):
	movff	xRD+0,sub_b+0
	movff	xRD+1,sub_b+1
	call	subU16						; sub_c = sub_a - sub_b
	btfsc	neg_flag					; >=0?
	return								; No
	; store the RO=RP-RD for drawing
	movff	sub_c+0,xC+0
	movff	sub_c+1,xC+1

	; 1/b. check if it's viewable ? sub_a(RP)+up(width) < sub_b(RD)+160
	;      if already above, no need to process the rest of the labels
	movff	up,WREG	; take care about the width
	addwf	sub_a+0,1
	btfsc	STATUS, C
	incf	sub_a+1

	movff	xRDr+0,sub_b+0
	movff	xRDr+1,sub_b+1
	call	subU16	 ;  sub_c = sub_a - sub_b
	btfss	neg_flag	; ? <0
	bra		TFT_dive_compass_label_end	; No

	; 2. restore RO=RP-RD from 1/a.
	movff	xC+0,lo

	; 3. Clear the segment from DD(hi) to lo
	;    don't do a clear if we are at 0 (zero) otherwise it will blink
	;   ?because of the width underflow?
	movlw	d'1'
	cpfsgt	lo
	bra		TFT_dive_compass_label_proc_p
	rcall	TFT_dive_compass_clr_label
TFT_dive_compass_label_proc_p:
	; 4. print the SQ on the screen
	call	TFT_standard_color
	bsf		print_compass_label
;TFT_dive_compass_label_print:
	movlw	dm_custom_compass_label_row
	movff	WREG,win_top
	movff	lo,win_leftx2
	movlw	FT_SMALL
	movff	WREG,win_font
	; 6. retain the new display positions
	movff	lo,hi
	movff	up,WREG
	addwf	hi,F
	movff	lo,xLO
	movff	hi,xHI
	return

TFT_dive_compass_c_mk:
	; Common task to draw center line and marker
	; until a proper implementation make it simple:
	rcall	TFT_dive_compass_mk
	movlw	color_yellow
	WIN_BOX_COLOR dm_custom_compass_tick_top_top, dm_custom_compass_tick_bot_bot,.80,.81 ; center line in yellow
	return

TFT_dive_compass_mk:
	; draw the bearing on the screen if visible and if we just put something over it
	btfss	compass_bearing_set
	return								; bearing_set=0 nothing to display

	btfss	compass_bearing_vis
	return	; bearing set but not visible

	; save lo/hi from trashing
	movff	lo,xA+0
	movff	hi,xA+1

	; did we just update the marker's position?
	; DD.......DD
	; CM+2>=DD(old) or CM-2<=DD
	; ToDo

	btfss	compass_bearing_ahd
	bra		TFT_dive_compass_mk_rear
;TFT_dive_compass_mk_front:
	clrf	lo
	movff	xCM,lo
	bsf		print_compass_label			; set=green marker
	rcall	TFT_dive_compass_mk_print
	bcf		print_compass_label
	bra		TFT_dive_compass_mk_end

TFT_dive_compass_mk_rear:
	clrf	lo
	movff	xCM,lo
	bcf		print_compass_label			; set=red marker
	rcall	TFT_dive_compass_mk_print

TFT_dive_compass_mk_end:
	movff	xA+0,lo
	movff	xA+1,hi
	return

TFT_dive_compass_mk_print:
	movlw	d'1'
	cpfsgt	lo
	bra		TFT_dive_compass_mk_print_2	; lo<=1, skip the first line
	movlw	d'2'
	subwf	lo,0
;	movff	WREG,win_leftx2
	rcall	TFT_dive_compass_mk_print_3
TFT_dive_compass_mk_print_2:
	; save hi/lo
	movff	hi,divA+1
	movff	lo,divA+0
	; clear the middle of the bearing marker
	movff	lo,hi
	movlw	d'2'
	addwf	lo,1
	rcall	TFT_dive_compass_clr_label
	; restore hi/lo
	movff	divA+1,hi
	movff	divA+0,lo
	; print a dot on the middle
	movff	lo,WREG
	rcall	TFT_dive_compass_mk_print_dot
	; finally print the right marker line
	movlw	d'2'
	addwf	lo,0
;	rcall	TFT_dive_compass_mk_print_3
;	return
TFT_dive_compass_mk_print_3:
	movwf	win_leftx2
	movlw	dm_custom_compass_label_row
	movwf	win_top
	movlw	dm_custom_compass_label_height-.2
	movwf	win_height
	bra		TFT_dive_compass_mk_print_4
TFT_dive_compass_mk_print_dot:
	movwf	win_leftx2
	movlw	dm_custom_compass_label_row + .9
	movwf	win_top
	movlw	d'4'
	movwf	win_height
TFT_dive_compass_mk_print_4:
	movlw	.158
	cpfslt	win_leftx2
	bra		TFT_dive_compass_mk_print_5
	movlw	d'2'
	movwf	win_width+0
	clrf	win_width+1
	movwf	win_bargraph
	movlw	color_green
	btfss	print_compass_label
	movlw	color_red
	call	TFT_set_color
	call	TFT_box
TFT_dive_compass_mk_print_5:
	banksel	common
	return

TFT_dive_compass_clr_label:
	movlw	dm_custom_compass_label_row-.2	; set top & height
	movff	WREG,win_top
	movlw	dm_custom_compass_label_height+.2
	movff	WREG,win_height
	rcall	TFT_dive_compass_clear
	return

TFT_dive_compass_clr_ruler:
	; top tick
	movlw	dm_custom_compass_tick_top_top	; set top & height
	movff	WREG,win_top
	movlw	dm_custom_compass_tick_height
	movff	WREG,win_height
	rcall	TFT_dive_compass_clear
	;bottom tick
	movlw	dm_custom_compass_tick_bot_top	; set top & height
	movff	WREG,win_top
	movlw	dm_custom_compass_tick_height
	movff	WREG,win_height
;	rcall	TFT_dive_compass_clear
;	return
TFT_dive_compass_clear:
	; we receive RM in lo and DD in hi
	; calculate width = RM-D
	movff	hi,WREG
	subwf	lo,W
	bz		TFT_dive_compass_clear3		; Do nothing if there is nothing to do
	movwf	win_width+0					; RM-DD
	movwf	win_bargraph
	clrf	win_width+1
	movlw	.1
	cpfsgt	win_width+0
	bra		TFT_dive_compass_clear3		; Do not clear a single pixel (or less)
	movff	hi,win_leftx2
	movlw	color_black
	call	TFT_set_color
	call	TFT_box
TFT_dive_compass_clear3:
	return

tft_compass_cardinal:
	btfsc	hi,0						; Heading >255°?
	bra		tft_compass_cardinal2		; Yes must be W, NW or N
	; No, Must be W, SW, S, SE, E, NE or N
	movlw	.23
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_N
	movlw	.68
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_NE
	movlw	.113
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_E
	movlw	.158
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_SE
	movlw	.203
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_S
	movlw	.248
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_SW
	bra		tft_compass_cardinal_W

tft_compass_cardinal2:
	movlw	.37
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_W
	movlw	.82
	subwf	lo,W
	btfss	STATUS,C
	bra		tft_compass_cardinal_NW
;	bra		tft_compass_cardinal_N

tft_compass_cardinal_N:
	STRCAT_TEXT	tN
	return
tft_compass_cardinal_NE:
	STRCAT_TEXT	tNE
	return
tft_compass_cardinal_E:
	STRCAT_TEXT	tE
	return
tft_compass_cardinal_SE:
	STRCAT_TEXT	tSE
	return
tft_compass_cardinal_S:
	STRCAT_TEXT	tS
	return
tft_compass_cardinal_SW:
	STRCAT_TEXT	tSW
	return
tft_compass_cardinal_W:
	STRCAT_TEXT	tW
	return
tft_compass_cardinal_NW:
	STRCAT_TEXT	tNW
	return

compass_heading_common:
	call	speed_normal
	movlw	compass_averaging			; numbers of extra averaging
	movwf	up
compass_heading_common2:
	rcall	TFT_get_compass
	decfsz	up,F
	bra		compass_heading_common2
	call	compass						; Do compass corrections.
	banksel	common

	; More then compass_fast_treshold?
	movff	compass_heading_old+0,sub_a+0
	movff	compass_heading_old+1,sub_a+1
	movff	compass_heading+0,sub_b+0
	movff	compass_heading+1,sub_b+1
	call	sub16
	btfss	neg_flag					; <0?
	bra	compass_heading_common3			; No, test for threshold
	; Yes, subtract the other way round
	movff	compass_heading+0,sub_a+0
	movff	compass_heading+1,sub_a+1
	movff	compass_heading_old+0,sub_b+0
	movff	compass_heading_old+1,sub_b+1
	call	sub16
compass_heading_common3:
	movff	compass_heading+0,compass_heading_old+0	; copy new "old"
	movff	compass_heading+1,compass_heading_old+1

	bcf		compass_fast_mode
	movlw	compass_fast_treshold
	cpfslt	sub_c+0						; > compass_fast_treshold?
	bsf		compass_fast_mode			; Yes!

	btfss   compass_fast_mode			; In fast mode?
	return								; No.
	; Yes.
	movff	compass_heading+0,lo
	movff	compass_heading+1,hi
	call	TFT_convert_signed_16bit	; converts lo:hi into signed-short and adds '-' to POSTINC2 if required
	movff	lo,compass_heading_shown+0
	movff	hi,compass_heading_shown+1
	return

TFT_get_compass:
	call	I2C_RX_compass				; Test Compass
	call	I2C_RX_accelerometer		; Test Accelerometer
	call	compass_filter				; Filter Raw compass + accel readings.
	banksel	common
	return

	END