Mercurial > public > hwos_code
view src/menu_tree.asm @ 645:070528a88715
3.16 release
| author | heinrichsweikamp |
|---|---|
| date | Sun, 07 Nov 2021 12:39:23 +0100 |
| parents | 7d8a4c60ec1a |
| children | ef2ed7e3a895 |
line wrap: on
line source
;============================================================================= ; ; File menu_tree.asm * combined next generation V3.12.2 ; ; OSTC Surface Menus ; ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. ;============================================================================= ; HISTORY ; 2011-07-11 : [jDG] Creation. ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; ; ATTENTION ; ; All Calls made via the Menu Macros need to go to Addresses within 0x0xxxx ! ; ;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include "hwos.inc" ; mandatory header #include "shared_definitions.h" ; mailbox from/to p2_deco.c #include "gaslist.inc" #include "menu_processor.inc" #include "start.inc" #include "comm.inc" #include "tft.inc" #include "eeprom_rs232.inc" #include "external_flash.inc" #include "adc_lightsensor.inc" #include "wait.inc" #include "i2c.inc" #include "calibrate.inc" #include "math.inc" #include "rtc.inc" #include "strings.inc" #include "tft_outputs.inc" #include "convert.inc" #include "colorschemes.inc" extern surfloop extern logbook extern demo_divemode extern demo_planner extern piezo_config extern comm_firmware_update_exec extern option_check_and_store_all extern option_reset extern option_reset_all extern option_adjust_group_member extern option_inc extern option_dec extern option_draw extern get_cpu_version extern eeprom_deco_data_write IFDEF _ccr_pscr extern option_cleanup_oCCRMode ENDIF IFDEF _compass extern compass_calibration ENDIF IFDEF _rx_functions extern get_transmitter_id_by_slot ENDIF ;============================================================================= surf_menu CODE 0x01000 ; needs to be at 0x0xxxx ;============================================================================= ;----------------------------------------------------------------------------- ; Returning from a Menu Item ; do_return_main_menu: call menu_processor_double_pop ; drop exit line and back to last line bra main_menu_common ; continue with menu ;----------------------------------------------------------------------------- ; Entry Point for Main Menu ; global main_menu main_menu: movff active_customview,customview_surfmode ; save last custom view clrf MS_flags_imprint ; clear all flags for data imprinting call TFT_boot ; initialize display call menu_processor_reset ; reset menu stack main_menu_common: IFDEF _ccr_pscr MENU_BEGIN tMainMenu, .7 MENU_CALL tLogbook, do_logbook MENU_CALL tGasSetup, do_menu_gas MENU_CALL tCCRSetup, do_menu_ccr MENU_CALL tDiveModeMenu, do_menu_dive MENU_CALL tSimulator, do_menu_simulator MENU_CALL tSystSets, do_menu_settings MENU_CALL tExit, do_restart MENU_END ELSE MENU_BEGIN tMainMenu, .6 MENU_CALL tLogbook, do_logbook MENU_CALL tGasSetup, do_menu_gas MENU_CALL tDiveModeMenu, do_menu_dive MENU_CALL tSimulator, do_menu_simulator MENU_CALL tSystSets, do_menu_settings MENU_CALL tExit, do_restart MENU_END ENDIF ; _ccr_pscr ;----------------------------------------------------------------------------- ; Call Function - start Logbook ; do_logbook: goto logbook ; code is hosted in logbook.asm ;----------------------------------------------------------------------------- ; Call Function - exit Menu ; do_restart: bsf restart_fast ; skip logos and waits an restart goto restart ; restart into surface mode IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; returning to CCR / pSCR Setup ; do_return_menu_ccr: call menu_processor_double_pop ; drop exit line and back to last line ;bra do_menu_ccr ;----------------------------------------------------------------------------- ; CCR / pSCR Setup - 1st Level ; do_menu_ccr: call option_cleanup_oCCRMode ; in pSCR mode, revert AutoSP (2) to calculated SP (0) IFDEF _external_sensor bcf imprint_sensor_mv ; stop imprinting of live O2 sensor mV data btfss ext_input_s8_ana ; S8/analog sensor input available? bra do_menu_ccr_2 ; NO - do OSTC 2 menu ;bra do_menu_ccr_cR ; YES - do OSTC cR menu do_menu_ccr_cR: ; OSTC cR menu MENU_BEGIN tCCRSetup, .6 MENU_OPT_INC tCCRMode, oCCRMode MENU_CALL tCalibrateMenu, do_menu_calibrate MENU_CALL tDiluentSetup, do_menu_diluent MENU_CALL tFixedSetpoints, do_menu_setpoints MENU_CALL tMore, do_menu_ccr_more MENU_CALL tBack, do_return_main_menu MENU_END ENDIF ; _external_sensor do_menu_ccr_2: MENU_BEGIN tCCRSetup, .5 ; OSTC 2 menu MENU_OPT_INC tCCRMode, oCCRMode MENU_CALL tDiluentSetup, do_menu_diluent MENU_CALL tFixedSetpoints, do_menu_setpoints MENU_CALL tMore, do_menu_ccr_more MENU_CALL tBack, do_return_main_menu MENU_END ;----------------------------------------------------------------------------- ; CCR / pSCR Setup - 2nd Level ; do_menu_ccr_more: IFDEF _external_sensor MENU_BEGIN tCCRSetup, .7 ; CCR/pSCR more menu MENU_OPT_INC tS8Mode, oS8Mode MENU_OPT_INC tCCmaxFracO2, oCCmaxFracO2 MENU_OPT_INC tDilppO2Check, oDilppO2Check MENU_OPT_INC tGasDensityCheck, oGasDensityCheck MENU_OPT_INC tPSCR_O2_drop, oPSCR_drop MENU_OPT_INC tPSCR_lungratio, oPSCR_lungratio MENU_CALL tBack, do_return_menu_ccr MENU_END ELSE MENU_BEGIN tCCRSetup, .6 ; CCR/pSCR more menu MENU_OPT_INC tCCmaxFracO2, oCCmaxFracO2 MENU_OPT_INC tDilppO2Check, oDilppO2Check MENU_OPT_INC tGasDensityCheck, oGasDensityCheck MENU_OPT_INC tPSCR_O2_drop, oPSCR_drop MENU_OPT_INC tPSCR_lungratio, oPSCR_lungratio MENU_CALL tBack, do_return_menu_ccr MENU_END ENDIF ; _external_sensor ENDIF ; _ccr_pscr IFDEF _external_sensor ;----------------------------------------------------------------------------- ; Calibration Menu ; do_menu_calibrate: call enable_ir_s8_analog ; enable IR/S8/analog interface bsf imprint_sensor_mv ; start imprinting of live O2 sensor mV data MENU_BEGIN tCalibrateMenu, .6 MENU_CALL tDiveHudMask1, 0 ; data will be superimposed by housekeeping MENU_CALL tDiveHudMask2, 0 ; ... MENU_CALL tDiveHudMask3, 0 ; ... MENU_OPT_INC tCalibrationGas, oCalGasO2 MENU_CALL tCalibrate, do_calibrate MENU_CALL tBack, do_return_menu_ccr MENU_END ;----------------------------------------------------------------------------- ; Call Function - start Calibration, returns to Surface Mode ; do_calibrate: call calibrate_mix ; calibrate with opt_calibration_O2_ratio, also calibrate S8 HUD if connected WAITMS d'250' ; wait for HUD v3 movlw .9 ; load index of sensor mV custom view movff WREG,customview_surfmode ; show this custom view when back in surface mode bra do_restart ; exit menu ENDIF ; _external_sensor IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; Diluent Setup ; do_menu_diluent: bsf is_diluent_menu ; setting up diluents bcf short_gas_descriptions ; use long gas description format bcf better_gas_hint ; do not mark the best gas/diluent (to be used in dive mode only) call gaslist_cleanup_list ; make sure there is only one gas being first MENU_BEGIN tDiluentSetup, .6 MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_CALL tBack, do_return_menu_ccr MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show full Gas Description (just for info, active code is in other place) ; ;dyn_strcat_gas_PRODL: ; goto gaslist_strcat_gas_PRODL ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; returning to Setpoint Setup ; do_return_menu_setpoints: call menu_processor_double_pop ; drop exit line and back to last line bcf block_option_value ; resume displaying of option values ;bra do_menu_setpoints ; continue ;----------------------------------------------------------------------------- ; Setpoint Setup - 1st Level ; do_menu_setpoints: bcf short_gas_descriptions ; use long gas description format bcf better_gas_hint ; do not mark the best gas/diluent (to be used in dive mode only) MENU_BEGIN tFixedSetpoints, .6 MENU_DYNAMIC dyn_strcat_setpoint_prodl, do_menu_edit_sp MENU_DYNAMIC dyn_strcat_setpoint_prodl, do_menu_edit_sp MENU_DYNAMIC dyn_strcat_setpoint_prodl, do_menu_edit_sp MENU_DYNAMIC dyn_strcat_setpoint_prodl, do_menu_edit_sp MENU_DYNAMIC dyn_strcat_setpoint_prodl, do_menu_edit_sp MENU_CALL tBack, do_return_menu_ccr MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show Setpoint Data ; dyn_strcat_setpoint_prodl: goto gaslist_strcat_setpoint_PRODL ; function is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; Setpoint Setup - 2nd Level ; do_menu_edit_sp: movff PRODL,gaslist_gas ; get menu item we came from (0-4) bsf block_option_value ; suspend displaying of option values MENU_BEGIN tFixedSetpoints, .5 MENU_DYNAMIC dyn_strcat_setpoint, 0 MENU_GRP_INC tSPPlus, oSP1ppO2 MENU_GRP_INCS tDepthPlus, oSP1Depth MENU_GRP_DECS tDepthMinus, oSP1Depth MENU_CALL tBack, do_return_menu_setpoints MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show Setpoint Data ; dyn_strcat_setpoint: goto gaslist_strcat_setpoint ; function is hosted in gaslist.asm ENDIF ; _ccr_pscr ;----------------------------------------------------------------------------- ; returning from Gas / Diluent Setup ; do_return_menu_gas: call menu_processor_double_pop ; drop exit line and back to last line IFDEF _ccr_pscr btfsc is_diluent_menu ; return from setting up diluents? bra do_menu_diluent ; YES - continue with diluent menu ;bra do_menu_gas ; NO - continue with OC gas menu ENDIF ;----------------------------------------------------------------------------- ; OC Gas Setup - 1st Level ; do_menu_gas: bcf is_diluent_menu ; setting up OC gases bcf short_gas_descriptions ; use long gas description format bcf better_gas_hint ; do not mark the best gas/diluent (to be used in dive mode only) call gaslist_cleanup_list ; make sure there is only one gas being first MENU_BEGIN tGaslist, .6 MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_DYNAMIC dyn_strcat_gas_PRODL, do_menu_edit_gas MENU_CALL tBack, do_return_main_menu MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show full Gas Description ; dyn_strcat_gas_PRODL: goto gaslist_strcat_gas_PRODL ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; return to OC Gas Setup from Sub-Menu ; do_return_menu_edit_gas: IFDEF _rx_functions bcf imprint_xmitter_pres ; stop imprinting of transmitter pressure data bcf imprint_xmitter_ID ; not in transmitter selection menu any more (back to normal timeout) ENDIF call menu_processor_double_pop ; drop exit line and back to last line bcf block_option_value ; resume displaying of option values bra do_menu_edit_gas_common ; continue with common part ;----------------------------------------------------------------------------- ; OC Gas Setup - 2nd Level ; do_menu_edit_gas: movff PRODL,gaslist_gas ; get menu item we came from (0-4) movlw .5 ; offset between gases and diluents btfsc is_diluent_menu ; setting up diluents? addwf gaslist_gas,F ; YES - add the offset do_menu_edit_gas_common: MENU_BEGIN tGasEdit, .7 MENU_DYNAMIC dyn_gastitle, 0 MENU_DYNAMIC dyn_MOD_END, 0 MENU_GRP_INC tType, oGas1 MENU_CALL tSetup_GasMix, do_menu_gas_mix MENU_DYNAMIC dyn_show_depth, do_menu_gas_depth MENU_CALL tSetup_Tank, do_menu_gas_tank MENU_CALL tBack, do_return_menu_gas MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show full Gas Description ; dyn_gastitle: goto gaslist_strcat_gas ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; dynamic Title - show MOD and END ; dyn_MOD_END: goto gaslist_MOD_END ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; dynamic Title - show Change Depth ; dyn_show_depth: movf gaslist_gas,W ; load gas/dil index into WREG (0-9) lfsr FSR1,opt_gas_change ; load base address of change depths tstfsz PLUSW1 ; change depth = 0 ? bra dyn_show_depth_1 ; NO - print in normal color lfsr FSR1,opt_gas_type ; YES - load base address of opt_gas_type tstfsz PLUSW1 ; - type = disabled ? FONT_COLOR_ATTENTION ; NO - print in attention color (yellow) dyn_show_depth_1: STRCAT_TEXT tSetup_GasDepth ; print text return ; done ;----------------------------------------------------------------------------- ; OC Gas Setup - 3rd Level - Mix ; do_menu_gas_mix: bsf block_option_value ; suspend displaying of option values IFDEF _helium MENU_BEGIN tGasEdit, .7 MENU_DYNAMIC dyn_gastitle, 0 MENU_DYNAMIC dyn_MOD_END, 0 MENU_GRP_INCS tO2Plus, oGas1O2 MENU_GRP_DECS tO2Minus, oGas1O2 MENU_GRP_INCS tHePlus, oGas1He MENU_GRP_DECS tHeMinus, oGas1He MENU_CALL tBack, do_return_menu_edit_gas MENU_END ELSE MENU_BEGIN tGasEdit, .5 MENU_DYNAMIC dyn_gastitle, 0 MENU_DYNAMIC dyn_MOD_END, 0 MENU_GRP_INCS tO2Plus, oGas1O2 MENU_GRP_DECS tO2Minus, oGas1O2 MENU_CALL tBack, do_return_menu_edit_gas MENU_END ENDIF ;----------------------------------------------------------------------------- ; OC Gas Setup - 3rd Level - Change Depth ; do_menu_gas_depth: bsf block_option_value ; suspend displaying of option values MENU_BEGIN tGasEdit, .7 MENU_DYNAMIC dyn_gastitle, 0 MENU_DYNAMIC dyn_MOD_END, 0 MENU_DYNAMIC dyn_ppo2, 0 MENU_GRP_INCS tDepthPlus, oGas1Depth MENU_GRP_DECS tDepthMinus, oGas1Depth MENU_DYNAMIC dyn_reset_mod_title, do_gas_depth_reset MENU_CALL tBack, do_return_menu_edit_gas MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show Gas Description ; ;dyn_gastitle: ; goto gaslist_strcat_gas ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; dynamic Title - show MOD and END ; ;dyn_MOD_END: ; goto gaslist_MOD_END ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; dynamic Title - show ppO2 and Change Depth ; dyn_ppo2: goto gaslist_ppo2 ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; dynamic Title - show 'Rest to MOD' Dialog ; dyn_reset_mod_title: goto gaslist_reset_mod_title ; code is hosted in gaslist.asm ;----------------------------------------------------------------------------- ; Call Function - reset Change Depth to MOD ; do_gas_depth_reset: call gaslist_calc_mod ; compute MOD, result in WREG movwf lo ; copy result to lo lfsr FSR1,opt_gas_change ; load base address of opt_gas_change movf gaslist_gas,W ; load index movff lo,PLUSW1 ; update change depth bsf option_changed ; flag that EEPROM needs to be updated return ; done ;----------------------------------------------------------------------------- ; OC Gas Setup - 3rd Level - Tank Setup ; do_menu_gas_tank: IFDEF _rx_functions TSTOSC opt_TR_mode ; TR functions switched on? bra do_menu_gas_tank_rx ; YES ENDIF IFDEF _ccr_pscr MENU_BEGIN tSetup_Tank, .5 MENU_DYNAMIC dyn_gastitle, 0 MENU_GRP_INC tTankSize, oTankSizeOC1 MENU_GRP_INC tTankUsablePress, oTankPresOC1 MENU_CALL tCopyDilToOC, do_copy_dil_to_oc MENU_CALL tBack, do_return_menu_edit_gas MENU_END ELSE MENU_BEGIN tSetup_Tank, .4 MENU_DYNAMIC dyn_gastitle, 0 MENU_GRP_INC tTankSize, oTankSizeOC1 MENU_GRP_INC tTankUsablePress, oTankPresOC1 MENU_CALL tBack, do_return_menu_edit_gas MENU_END ENDIF ; _ccr_pscr IFDEF _rx_functions do_menu_gas_tank_rx: setf pairing_slot ; prime slot number with 255 aka -1, used in pairing function bsf imprint_xmitter_ID ; in transmitter selection menu (longer timeout) IFDEF _ccr_pscr MENU_BEGIN tSetup_Tank, .7 MENU_DYNAMIC dyn_gastitle, 0 MENU_DYNAMIC dyn_tank_id_pres, 0 ; pressure will be superimposed by housekeeping MENU_CALL tTankPairing, do_tank_pairing MENU_GRP_INC tTankSize, oTankSizeOC1 MENU_GRP_INC tTankUsablePress, oTankPresOC1 MENU_CALL tCopyDilToOC, do_copy_dil_to_oc MENU_CALL tBack, do_return_menu_edit_gas MENU_END ELSE MENU_BEGIN tSetup_Tank, .6 MENU_DYNAMIC dyn_gastitle, 0 MENU_DYNAMIC dyn_tank_id_pres, 0 ; pressure will be superimposed by housekeeping MENU_CALL tTankPairing, do_tank_pairing MENU_GRP_INC tTankSize, oTankSizeOC1 MENU_GRP_INC tTankUsablePress, oTankPresOC1 MENU_CALL tBack, do_return_menu_edit_gas MENU_END ENDIF ; _ccr_pscr ;----------------------------------------------------------------------------- ; dynamic Title - show Transmitter ID ; dyn_tank_id_pres: STRCAT " ID: " ; print header ; get ID lfsr FSR1,opt_transmitter_id_1 ; load base address of opt_transmitter_id movf gaslist_gas,W ; load index (0-9) rlncf WREG,W ; multiply by 2 because IDs are 2 byte in size movff PLUSW1,lo ; copy opt_transmitter_id+0[gaslist_gas] to lo incf WREG,W ; increment index movff PLUSW1,hi ; copy opt_transmitter_id+1[gaslist_gas] to hi ; check if a transmitter is paired to this tank tstfsz hi ; high byte of ID <> 0 ? bra dyn_tank_id_pres_1 ; YES - a transmitter is paired to the tank tstfsz lo ; low byte of ID <> 0 ? bra dyn_tank_id_pres_1 ; YES - a transmitter is paired to the tank STRCAT "----" ; NO - no transmitter paired bcf imprint_xmitter_pres ; - stop imprinting of transmitter pressure data return ; - done dyn_tank_id_pres_1: ; show ID movf hi,W ; copy high byte of ID to WREG output_hex ; print it movf lo,W ; copy low byte of ID to WREG output_hex ; print it bsf imprint_xmitter_pres ; start imprinting of transmitter pressure data return ; done ;----------------------------------------------------------------------------- ; Call Function - pair a Transmitter to a Tank ; do_tank_pairing: incf pairing_slot,F ; goto next RX data slot btfsc pairing_slot,3 ; slot = 8? bra do_tank_pairing_none ; YES - offer unpairing movf pairing_slot,W ; NO - copy slot to WREG call get_transmitter_id_by_slot ; WREG = slot (0-7) -> hi:lo = transmitter ID tstfsz hi ; transmitter found (probe on high byte)? bra do_tank_pairing_common ; YES - select this transmitter tstfsz hi ; transmitter found (probe on low byte)? bra do_tank_pairing_common ; YES - select this transmitter bra do_tank_pairing ; NO - try next slot do_tank_pairing_common: lfsr FSR1,opt_transmitter_id_1 ; load base address of opt_transmitter_id movf gaslist_gas,W ; load index into WREG (0-9) rlncf WREG,W ; multiply by 2 because IDs are 2 byte in size movff lo,PLUSW1 ; copy lo to opt_transmitter_id+0[gaslist_gas] incf WREG,W ; increment index movff hi,PLUSW1 ; copy hi to opt_transmitter_id+1[gaslist_gas] bsf option_changed ; flag that EEPROM needs to be updated return ; done do_tank_pairing_none: setf pairing_slot ; prime slot number with 255 aka -1 clrf hi ; adjust "no transmitter" ID clrf lo ; adjust "no transmitter" ID bra do_tank_pairing_common ; continue with common part ENDIF ; _rx_functions IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; Call Function - copy Diluent Setup to OC Gases ; do_copy_dil_to_oc: bcf copying_dil ; default to copying a gas movf gaslist_gas,W ; copy current gas or diluent number to WREG btfss is_diluent_menu ; setting up diluents? bra do_copy_dil_to_oc_1 ; NO - gaslist_gas is already pointing to an OC gas addlw -.5 ; YES - subtract offset between diluents and gases movwf gaslist_gas ; - let gaslist_gas point to the corresponding OC gas bsf copying_dil ; - we are copying a diluent bcf is_diluent_menu ; - pretend we are setting up OC gases do_copy_dil_to_oc_1: lfsr FSR0,opt_dil_O2_ratio ; load base address of diluents settings, ASM variables lfsr FSR1,opt_gas_O2_ratio ; load base address of gas settings, ASM variables movff PLUSW0,PLUSW1 ; copy O2 ratio addlw .10 ; add offset from O2 ratios to He ratios movff PLUSW0,PLUSW1 ; copy He ratio addlw .10 ; add offset from He ratios to types movff PLUSW0,PLUSW1 ; copy type addlw .10 ; add offset from type to change depth movff PLUSW0,PLUSW1 ; copy change depth addlw -.30 ; wind back to initial gas number lfsr FSR0,char_I_gas_avail_size+5; load base address of diluents settings, shared variables lfsr FSR1,char_I_gas_avail_size+0; load base address of gas settings, shared variables movff PLUSW0,PLUSW1 ; copy tank size addlw .10 ; add offset from tank sizes to pressure budget movff PLUSW0,PLUSW1 ; copy pressure budget call gaslist_cleanup_list ; make sure there is only one gas being first bsf option_changed ; flag that EEPROM needs to be updated btfss copying_dil ; are we copying a diluent? return ; NO - done bsf is_diluent_menu ; YES - restore to be setting up diluents movlw .5 ; - offset between OC gases and diluents addwf gaslist_gas,F ; - let gaslist_gas point to the diluent again WIN_BOX_BLACK .30,.239,.0,.159 ; - create some visual effect to show activity WAITMS .200 ; - pause for 200 ms return ; - done ENDIF ; _ccr_pscr ;----------------------------------------------------------------------------- ; return to Simulator (Deco Calculator) Menu from Sub-Menu ; do_return_menu_simulator: call menu_processor_double_pop ; drop exit line and back to last line bra do_menu_simulator_common_2 ; continue ;----------------------------------------------------------------------------- ; return to Simulator (Deco Calculator) Menu from Deco Calculator ; global do_return_menu_simulator_planner do_return_menu_simulator_planner: call menu_processor_pop ; back to last line bra do_menu_simulator_common_1 ; continue ;----------------------------------------------------------------------------- ; Simulator (Deco Calculator) Menu ; do_menu_simulator: ; reset planning parameters to default values lfsr FSR0,odiveInterval ; surface interval call option_reset ; reset to default lfsr FSR0,obottomTime ; bottom time call option_reset ; reset to default lfsr FSR0,obottomDepth ; bottom depth call option_reset ; reset to default lfsr FSR0,oSimAGF ; GF/aGF call option_reset ; reset to default IFDEF _gas_contingency lfsr FSR0,oGasContingencySim ; gas contingency call option_reset ; reset to default (volatile option) ENDIF ; _gas_contingency do_menu_simulator_common_1: call restart_set_modes_and_flags ; initialize dive mode settings do_menu_simulator_common_2: IFDEF _ccr_pscr movff opt_dive_mode,WREG ; get dive mode: 0=OC, 1=CCR, 2=Gauge, 3=Apnea, 4=pSCR decfsz WREG,W ; subtract one, became zero? bra do_menu_simulator_common_oc ; NO - use OC version ;bra do_menu_simulator_common_ccr; YES - use CCR version do_menu_simulator_common_ccr: MENU_BEGIN tSimulator, .7 MENU_OPT_INC tIntvl, odiveInterval MENU_OPT_INC tBtDep, obottomDepth MENU_CALL tInter, do_demo_divemode MENU_OPT_INC tBtTm, obottomTime MENU_CALL tCalculatorSetup, do_menu_simulator_more MENU_CALL tDeco, do_demo_planner MENU_CALL tBack, do_return_main_menu MENU_END ENDIF ; _ccr_pscr do_menu_simulator_common_oc: MENU_BEGIN tSimulator, .7 MENU_OPT_INC tIntvl, odiveInterval MENU_OPT_INC tBtDep, obottomDepth MENU_CALL tInter, do_demo_divemode MENU_OPT_INC tBtTm, obottomTime MENU_OPT_INC tuseAGF, oSimAGF MENU_CALL tDeco, do_demo_planner MENU_CALL tBack, do_return_main_menu MENU_END ;----------------------------------------------------------------------------- ; Call Function - start Simulator Mode ; do_demo_divemode: goto demo_divemode ; code is hosted in divemode.asm ;----------------------------------------------------------------------------- ; Call Function - start Deco Calculator ; do_demo_planner: goto demo_planner ; code is hosted in simulator.asm ;----------------------------------------------------------------------------- ; Simulator (Deco Calculator) Menu - 2nd Layer ; do_menu_simulator_more: IFDEF _gas_contingency MENU_BEGIN tSimulator, .4 MENU_OPT_INC tSelectSetpoint, oSimSetpoint MENU_OPT_INC tuseAGF, oSimAGF MENU_OPT_INC tGasContingencySim, oGasContingencySim MENU_CALL tBack, do_return_menu_simulator MENU_END ELSE MENU_BEGIN tSimulator, .3 MENU_OPT_INC tSelectSetpoint, oSimSetpoint MENU_OPT_INC tuseAGF, oSimAGF MENU_CALL tBack, do_return_menu_simulator MENU_END ENDIF ; _gas_contingency ;----------------------------------------------------------------------------- ; return to Dive Settings Menu from Sub-Menu ; do_return_menu_dive: call menu_processor_double_pop ; drop exit line and back to last line ;bra do_menu_dive ; continue ;----------------------------------------------------------------------------- ; Dive Settings Menu - 1st Layer ; do_menu_dive: MENU_BEGIN tDiveModeMenu, .6 MENU_CALL tDiveSetup, do_menu_dive_dive ; dive setup MENU_CALL tDecoSetup, do_menu_dive_deco ; deco setup MENU_CALL tSACSetup, do_menu_dive_SAC ; SAC setup MENU_CALL tppO2Setup, do_menu_dive_ppO2 ; ppO2 limits MENU_CALL tStopsSetup, do_menu_dive_stops ; stops setup MENU_CALL tBack, do_return_main_menu MENU_END ;----------------------------------------------------------------------------- ; Dive Settings Menu - 2nd Layer - Dive Mode ; do_menu_dive_dive: IFDEF _cave_mode MENU_BEGIN tDiveSetup, .6 MENU_OPT_INC tDvMode, oDiveMode ; dive mode MENU_OPT_INC tCvMode, oCaveMode ; cave mode MENU_OPT_INC tFTTSMenu, oExtraTime ; fTTS/delay MENU_OPT_INC tTimeoutDive, oDiveTimeout ; dive timeout MENU_OPT_INC tStoreApnoeDive, oStoreApnoe ; store apnoe MENU_CALL tBack, do_return_menu_dive MENU_END ELSE MENU_BEGIN tDiveSetup, .5 MENU_OPT_INC tDvMode, oDiveMode ; dive mode MENU_OPT_INC tFTTSMenu, oExtraTime ; fTTS/delay MENU_OPT_INC tTimeoutDive, oDiveTimeout ; dive timeout MENU_OPT_INC tStoreApnoeDive, oStoreApnoe ; store apnoe MENU_CALL tBack, do_return_menu_dive MENU_END ENDIF ;----------------------------------------------------------------------------- ; return to Dive Settings Menu from Sub-Menu ; do_return_menu_dive_deco: call menu_processor_double_pop ; drop exit line and back to last line ;bra do_menu_dive_deco ; continue ;----------------------------------------------------------------------------- ; Dive Settings Menu - 2nd Layer - Deco Mode ; do_menu_dive_deco: MENU_BEGIN tDecoSetup, .5 MENU_OPT_INC tDkMode, oDecoMode ; ZH-L16 /GF MENU_CALL tSDMenu, do_menu_dive_deco_SD ; SD settings MENU_CALL tGFMenu, do_menu_dive_deco_GF ; GF settings MENU_OPT_INC tAltMode, oAltMode ; altitude mode MENU_CALL tBack, do_return_menu_dive MENU_END ;----------------------------------------------------------------------------- ; Dive Settings Menu - 3nd Layer - Deco Mode - SD Settings ; do_menu_dive_deco_SD: TSTOSS char_I_model ; in GF mode? bra do_menu_dive_deco_SD_noGF ; NO ;bra do_menu_dive_deco_SD_GF ; YES do_menu_dive_deco_SD_GF: MENU_BEGIN tSDMenu, .3 MENU_OPT_INC tSaturationMult, osatmultgf ; saturation GF mode MENU_OPT_INC tDesaturationMult, odesatmultgf ; desaturation GF mode MENU_CALL tBack, do_return_menu_dive_deco MENU_END do_menu_dive_deco_SD_noGF: MENU_BEGIN tSDMenu, .3 MENU_OPT_INC tSaturationMult, osatmult ; saturation non-GF mode MENU_OPT_INC tDesaturationMult, odesatmult ; desaturation non-GF mode MENU_CALL tBack, do_return_menu_dive_deco MENU_END ;----------------------------------------------------------------------------- ; Dive Settings Menu - 3nd Layer - Deco Mode - GF Settings ; do_menu_dive_deco_GF: MENU_BEGIN tGFMenu, .6 MENU_OPT_INC tGF_low, oGF_low ; GF low MENU_OPT_INC tGF_high, oGF_high ; GF high MENU_OPT_INC taGFenable, oEnable_aGF ; aGF selectable MENU_OPT_INC taGF_low, oaGF_low ; aGF low MENU_OPT_INC taGF_high, oaGF_high ; aGF high MENU_CALL tBack, do_return_menu_dive_deco MENU_END ;----------------------------------------------------------------------------- ; Dive Settings Menu - 2nd Layer - SAC Setup ; do_menu_dive_SAC: IFDEF _gas_contingency MENU_BEGIN tSACSetup, .6 MENU_OPT_INC tCalcGasNeeds, oCalcAscGas ; calc.gas MENU_OPT_INC tGasContingencyDive, oGasContingencyDive ; switch tank if used up MENU_OPT_INC tGasChangeTime, oGasChangeTime ; gas change time MENU_OPT_INC tSetWorkSAC, oWork_SAC ; work SAC MENU_OPT_INC tSetDecoSAC, oDeco_SAC ; deco SAC MENU_CALL tBack, do_return_menu_dive MENU_END ELSE MENU_BEGIN tSACSetup, .5 MENU_OPT_INC tCalcGasNeeds, oCalcAscGas ; calc.gas MENU_OPT_INC tGasChangeTime, oGasChangeTime ; gas change time MENU_OPT_INC tSetWorkSAC, oWork_SAC ; work SAC MENU_OPT_INC tSetDecoSAC, oDeco_SAC ; deco SAC MENU_CALL tBack, do_return_menu_dive MENU_END ENDIF ;----------------------------------------------------------------------------- ; Dive Settings Menu - 2nd Layer - ppO2 Setup ; do_menu_dive_ppO2: IFDEF _ccr_pscr IFDEF _helium MENU_BEGIN tppO2Setup, .6 MENU_DYNAMIC dyn_ppo2_max, do_toggle_ppO2_max_work ; max work MENU_DYNAMIC dyn_ppo2_max_deco, do_toggle_ppO2_max_deco ; max deco MENU_DYNAMIC dyn_ppo2_min, do_toggle_ppO2_min ; min OC MENU_DYNAMIC dyn_ppo2_min_cc, do_toggle_ppO2_min_cc ; min loop MENU_OPT_INC tIBCDwarning, oEnable_IBCD ; IBCD warning MENU_CALL tBack, do_return_menu_dive MENU_END ELSE MENU_BEGIN tppO2Setup, .5 MENU_DYNAMIC dyn_ppo2_max, do_toggle_ppO2_max_work ; max work MENU_DYNAMIC dyn_ppo2_max_deco, do_toggle_ppO2_max_deco ; max deco MENU_DYNAMIC dyn_ppo2_min, do_toggle_ppO2_min ; min OC MENU_DYNAMIC dyn_ppo2_min_cc, do_toggle_ppO2_min_cc ; min loop MENU_CALL tBack, do_return_menu_dive MENU_END ENDIF ; _helium ELSE IFDEF _helium MENU_BEGIN tppO2Setup, .5 MENU_DYNAMIC dyn_ppo2_max, do_toggle_ppO2_max_work ; max work MENU_DYNAMIC dyn_ppo2_max_deco, do_toggle_ppO2_max_deco ; max deco MENU_DYNAMIC dyn_ppo2_min, do_toggle_ppO2_min ; min OC MENU_OPT_INC tIBCDwarning, oEnable_IBCD ; IBCD warning MENU_CALL tBack, do_return_menu_dive ELSE MENU_BEGIN tppO2Setup, .4 MENU_DYNAMIC dyn_ppo2_max, do_toggle_ppO2_max_work ; max work MENU_DYNAMIC dyn_ppo2_max_deco, do_toggle_ppO2_max_deco ; max deco MENU_DYNAMIC dyn_ppo2_min, do_toggle_ppO2_min ; min OC MENU_CALL tBack, do_return_menu_dive MENU_END ENDIF ; _helium ENDIF ; _ccr_pscr ;----------------------------------------------------------------------------- ; dynamic Title - show maximum ppO2 - Work ; dyn_ppo2_max: STRCAT_TEXT tPPO2Max ; print text movff char_I_ppO2_max_work,lo ; get value movlw ppo2_warning_high_default ; load default bra dyn_ppo2_common ; continue with common part ;----------------------------------------------------------------------------- ; dynamic Title - show maximum ppO2 - Deco ; dyn_ppo2_max_deco: STRCAT_TEXT tPPO2DECO ; print text movff char_I_ppO2_max_deco,lo ; get value movlw ppo2_warning_deco_default ; load default bra dyn_ppo2_common ; continue with common part ;----------------------------------------------------------------------------- ; dynamic Title - show minimum ppO2 ; dyn_ppo2_min: STRCAT_TEXT tPPO2MIN ; print text movff char_I_ppO2_min,lo ; get value movlw ppo2_warning_low_default ; load default bra dyn_ppo2_common ; continue with common part IFDEF _ccr_pscr ;----------------------------------------------------------------------------- ; dynamic Title - show minimum ppO2 - Loop Modes ; dyn_ppo2_min_cc: STRCAT_TEXT tPPO2MINCC ; print text movff char_I_ppO2_min_loop,lo ; get value movlw ppo2_warning_loop_default ; load default ;bra dyn_ppo2_common ; continue with common part ENDIF ;----------------------------------------------------------------------------- ; Helper Function to all show ppO2 dynamic Titles ; dyn_ppo2_common: movwf up ; copy default to up clrf hi ; clear hi bsf leftbind ; print left-aligned bsf decimal_digit2 ; place a decimal point in front of digit 2 output_256 ; print ppO2 as x.xx STRCAT_TEXT tbar ; append unit movf up,W ; get default value into WREG cpfseq lo ; current value = default value ? bra divesets_ppo2_common2 ; NO - add an "*" return ; YES - done divesets_ppo2_common2: PUTC "*" ; append a star return ; done ;----------------------------------------------------------------------------- ; Call Function - increment maximum ppO2 - Work ; do_toggle_ppO2_max_work: ; add 0.1 bar movff char_I_ppO2_max_work,lo ; bank-safe copy movlw .10 addwf lo,F movlw ppo2_warning_high_highest cpfsgt lo bra do_toggle_ppo2_max2 movlw ppo2_warning_high_lowest movwf lo do_toggle_ppo2_max2: movff lo,char_I_ppO2_max_work return ;----------------------------------------------------------------------------- ; Call Function - increment maximum ppO2 - Deco ; do_toggle_ppO2_max_deco: ; add 0.1 bar movff char_I_ppO2_max_deco,lo ; bank-safe copy movlw .10 addwf lo,F movlw ppo2_warning_deco_highest cpfsgt lo bra do_toggle_ppO2_max_deco2 movlw ppo2_warning_deco_lowest movwf lo do_toggle_ppO2_max_deco2: movff lo,char_I_ppO2_max_deco return ;----------------------------------------------------------------------------- ; Call Function - increment minimum ppO2 ; do_toggle_ppO2_min: ; sub 0.1 bar movff char_I_ppO2_min,lo ; bank-safe copy incf lo,F movlw ppo2_warning_low_highest cpfsgt lo bra do_toggle_ppO2_min2 movlw ppo2_warning_low_lowest movwf lo do_toggle_ppO2_min2: movff lo,char_I_ppO2_min return ;----------------------------------------------------------------------------- ; Call Function - increment minimum ppO2 - Loop Modes ; do_toggle_ppO2_min_cc: ; sub 0.1 bar movff char_I_ppO2_min_loop,lo ; bank-safe copy incf lo,F movlw ppo2_warning_loop_highest cpfsgt lo bra do_toggle_ppO2_min_cc2 movlw ppo2_warning_loop_lowest movwf lo do_toggle_ppO2_min_cc2: movff lo,char_I_ppO2_min_loop return ;----------------------------------------------------------------------------- ; Dive Settings Menu - 2nd Layer - Stops & Depth ; do_menu_dive_stops: MENU_BEGIN tStopsSetup, .6 MENU_OPT_INC tSafetyStop, oSafetyStop ; safety stop MENU_OPT_INC tExtendedStops, oExtendedStops ; extended stops MENU_OPT_INC tLastDecostop, oLastDeco ; last deco stop MENU_OPT_INC tDvSalinity, oDiveSalinity ; salinity MENU_OPT_INC tDepthWarn, oMaxDepth ; depth limit MENU_CALL tBack, do_return_menu_dive MENU_END ;----------------------------------------------------------------------------- ; return to Settings Menu from Sub-Sub-Menu ; do_return_menu_settings_deeper: ; entry point for return from info menu 2 call menu_processor_pop ; drop one more stack entry ;bra do_return_menu_settings ; continue ;----------------------------------------------------------------------------- ; return to Settings Menu from Sub-Menu ; do_return_menu_settings: bcf imprint_time_date ; stop imprinting of current time & date call menu_processor_double_pop ; drop exit line and back to last line IFDEF _rx_mode bcf tr_functions_activated ; set TR functions as deactivated by default btfss ostc_rx_present ; TR model / TR module up & running? bra do_menu_settings ; NO - keep deactivated movff opt_TR_mode,WREG ; YES - get TR mode tstfsz WREG ; - TR mode <> off ? bsf tr_functions_activated ; YES - set TR functions as activated ENDIF ;----------------------------------------------------------------------------- ; Settings Menu - 1st Layer ; do_menu_settings: IFDEF _hwos_sport bsf ble_available ; required for very old OSTC sport ENDIF btfsc ble_available ; BT available? bra do_menu_settings_bt ; YES - do BT menu MENU_BEGIN tSystSets, .5 MENU_CALL tInfoMenu, do_menu_info MENU_CALL tSetTimeDate, do_menu_date_time MENU_CALL tDispSets, do_menu_dispsets MENU_CALL tSysSets, do_menu_syssets MENU_CALL tBack, do_return_main_menu MENU_END do_menu_settings_bt: IFDEF _rx_functions btfss ostc_rx_present ; TR model and TR activated? bra do_menu_settings_noRX ; NO MENU_BEGIN tSystSets, .7 MENU_CALL tInfoMenu, do_menu_info MENU_CALL tBleTitle, do_comm_mode_bt MENU_CALL tTrSettings, do_menu_settings_TR MENU_CALL tSetTimeDate, do_menu_date_time MENU_CALL tDispSets, do_menu_dispsets MENU_CALL tSysSets, do_menu_syssets MENU_CALL tBack, do_return_main_menu MENU_END ENDIF do_menu_settings_noRX: MENU_BEGIN tSystSets, .6 MENU_CALL tInfoMenu, do_menu_info MENU_CALL tBleTitle, do_comm_mode_bt MENU_CALL tSetTimeDate, do_menu_date_time MENU_CALL tDispSets, do_menu_dispsets MENU_CALL tSysSets, do_menu_syssets MENU_CALL tBack, do_return_main_menu MENU_END ;----------------------------------------------------------------------------- ; Call Function - start Communication Mode (BT) ; do_comm_mode_bt: goto comm_mode_bt ; code hosted in comm.asm ;----------------------------------------------------------------------------- ; Settings Menu - 2nd Layer - System Infos - Page 1 ; do_menu_info: IFDEF _rx_functions btfss ostc_rx_present ; TR model? bra do_menu_info_noRX ; NO MENU_BEGIN tInfoMenu, .7 MENU_DYNAMIC dyn_show_uptime, 0 MENU_DYNAMIC dyn_show_serial, 0 MENU_DYNAMIC dyn_show_firmware_ostc, 0 MENU_DYNAMIC dyn_show_fw_creation_date, 0 MENU_DYNAMIC dyn_show_firmware_rx, 0 MENU_DYNAMIC dyn_show_total_dives, 0 MENU_CALL tMore, do_menu_info2 MENU_END ENDIF do_menu_info_noRX: MENU_BEGIN tInfoMenu, .6 MENU_DYNAMIC dyn_show_uptime, 0 MENU_DYNAMIC dyn_show_serial, 0 MENU_DYNAMIC dyn_show_firmware_ostc, 0 MENU_DYNAMIC dyn_show_fw_creation_date, 0 MENU_DYNAMIC dyn_show_total_dives, 0 MENU_CALL tMore, do_menu_info2 MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show Uptime ; dyn_show_uptime: STRCAT_TEXT tUptime ; print title SMOVQQ uptime,xC ; ISR-safe copy of uptime:4 to xC:4 goto output_secs_as_days_hours ; print seconds as days and hours and return ;----------------------------------------------------------------------------- ; dynamic Title - show Uptime ; dyn_show_serial: STRCAT_TEXT tSerial ; print title goto TFT_cat_serial ; print serial number and return ;----------------------------------------------------------------------------- ; dynamic Title - show Firmware Version ; dyn_show_firmware_ostc: STRCAT_TEXT tFirmware ; print title call TFT_cat_firmware ; print firmware version PUTC " " ; print a dot goto TFT_cat_beta_short ; print beta/release state and return ;----------------------------------------------------------------------------- ; dynamic Title - show Firmware creation Date ; dyn_show_fw_creation_date: STRCAT_TEXT tFirmwareDate ; print title movlw firmware_creation_year ; get firmware creation year movwf lo ; copy to lo movlw firmware_creation_month ; get firmware creation month movwf hi ; copy to hi movlw firmware_creation_day ; get firmware creation day movwf up ; copy to up goto output_date ; print date and return IFDEF _rx_functions ;----------------------------------------------------------------------------- ; dynamic Title - show RX Firmware Version (also used by start.asm) ; global dyn_show_firmware_rx dyn_show_firmware_rx: STRCAT_TEXT tFirmware_rx ; print title movff rx_firmware_cur_major,lo ; get major version bsf leftbind ; print left-aligned output_99 ; print major (0-99) PUTC '.' ; print a dot movff rx_firmware_cur_minor,lo ; get minor output_99x ; print minor (00-99) return ; done ENDIF ; _rx_functions ;----------------------------------------------------------------------------- ; dynamic Title - show total Number of Dives ; dyn_show_total_dives: STRCAT_TEXT tTotalDives ; print title call eeprom_total_dives_read ; read total number of dives bsf leftbind ; print left-aligned output_65535 ; print number of total dives (0-65535) return ; done ;----------------------------------------------------------------------------- ; Settings Menu - 2nd Layer - System Infos - Page 2 ; do_menu_info2: IFNDEF _comm_debug MENU_BEGIN tInfoMenu, .5 MENU_DYNAMIC dyn_show_battery_volts, 0 MENU_DYNAMIC dyn_show_config, 0 MENU_DYNAMIC dyn_show_sensor_calib, 0 MENU_DYNAMIC dyn_show_sensor_offset, 0 MENU_CALL tBack, do_return_menu_settings_deeper MENU_END ELSE MENU_BEGIN tInfoMenu, .6 MENU_DYNAMIC dyn_show_battery_volts, 0 MENU_DYNAMIC dyn_show_config, 0 MENU_DYNAMIC dyn_show_sensor_calib, 0 MENU_DYNAMIC dyn_show_sensor_offset, 0 MENU_OPT_INC tCommTimeout, oCommTimeout MENU_CALL tBack, do_return_menu_settings_deeper MENU_END ENDIF ;----------------------------------------------------------------------------- ; dynamic Title - show Battery Volts and Type ; dyn_show_battery_volts: STRCAT_TEXT tBatteryV ; print text MOVII batt_voltage,mpr ; get battery voltage bsf decimal_digit3 ; place a decimal point in front of digit 3 bsf omit_digit_1 ; do not print 1st digit output_9999 ; print as x.yy- STRCAT " V(T" ; append fix legend movff battery_type,lo ; =0:1.5V, =1:3.6V Saft, =2:LiIon 3.7V/0.8Ah, =3:LiIon 3.7V/3.1Ah, =4: LiIon 3.7V/2.3Ah output_9 ; print battery type code (0-9) PUTC ")" ; append fix legend return ; done ;----------------------------------------------------------------------------- ; dynamic Title - show Hardware / Software Configuration ; dyn_show_config: STRCAT_TEXT tHardware ; print text call I2C_init_compass ; start compass to get compass configuration movf HW_descriptor,W ; copy hardware descriptor to WREG output_hex ; print as hex movf HW_variants,W ; copy hardware variants to WREG output_hex ; print as hex PUTC "-" ; print a separator movlw FW_CONF ; get firmware configuration output_hex ; print as hex call get_cpu_version ; get CPU version output_hex ; print as hex return ; done ;----------------------------------------------------------------------------- ; dynamic Title - show Pressure Sensor Calibration Data C1 and C5 ; dyn_show_sensor_calib: STRCAT_TEXT tSensorC ; print label movff C1+1,WREG ; get C1, high byte output_hex ; print C1, high byte movff C1+0,WREG ; get C1, low byte output_hex ; print C1, low byte PUTC "-" ; print a separator movff C5+1,WREG ; get C5, high byte output_hex ; print C5, high byte movff C5+0,WREG ; get C5, low byte output_hex ; print C5, low byte btfss press_sensor_type ; =1: pressure sensor MS5837, =0: Pressure sensor MS5541 return ; MS5541, done PUTC "*" return ; MS5837, done ;----------------------------------------------------------------------------- ; dynamic Title - show Pressure Sensor Offset Setting ; dyn_show_sensor_offset: STRCAT_TEXT tSensorD ; print label movff opt_pressure_adjust,lo ; get pressure sensor offset movf lo,F ; excite flags bz dyn_show_sensor_offset_zero ; sensor offset = 0 bn dyn_show_sensor_offset_neg ; sensor offset < 0 ;bnn dyn_show_sensor_offset_pos ; sensor offset > 0 dyn_show_sensor_offset_pos: PUTC "+" ; print plus sign bra dyn_show_sensor_offset_com ; continue with common part dyn_show_sensor_offset_zero: PUTC " " ; print a space bra dyn_show_sensor_offset_com ; continue with common part dyn_show_sensor_offset_neg: PUTC "-" ; print a minus sign negf lo ; negate lo ;bra dyn_show_sensor_offset_com ; continue with common part dyn_show_sensor_offset_com: PUTC " " ; print a space bsf leftbind ; print left-aligned output_99 ; print value (0-99) PUTC " " ; print a space STRCAT_TEXT tMBAR ; print unit return ; done IFDEF _rx_functions ;----------------------------------------------------------------------------- ; Settings Menu - 2nd Layer - TR Settings ; do_menu_settings_TR: movff opt_dive_mode,WREG ; get dive mode: 0=OC, 1=CCR, 2=Gauge, 3=Apnea, 4=pSCR incf WREG,W ; add 1 dcfsnz WREG,W ; subtract one, became zero? bra do_menu_settings_TR_MaxDelta; YES - OC dcfsnz WREG,W ; subtract one, became zero? bra do_menu_settings_TR_BailPres; YES - CCR dcfsnz WREG,W ; subtract one, became zero? bra do_menu_settings_TR_MaxDelta; YES - Gauge dcfsnz WREG,W ; subtract one, became zero? bra do_menu_settings_TR_abort ; YES - Apnea, abort dcfsnz WREG,W ; subtract one, became zero? bra do_menu_settings_TR_both ; YES - pSCR do_menu_settings_TR_abort: call menu_processor_pop ; drop button press bra do_menu_settings ; back to same menu ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - TR Settings - Sidemount Mode ; do_menu_settings_TR_MaxDelta: ; menu with oTrMaxDeltaPres MENU_BEGIN tTrSettings, .5 MENU_OPT_INC tTrMode, oTrMode MENU_OPT_INC tTr1stPres, oTr1stPres MENU_OPT_INC tTr2ndPres, oTr2ndPres MENU_DYNAMIC dyn_toggle_max_pres_diff, do_toggle_max_pres_diff MENU_CALL tBack, do_return_menu_settings MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - TR Settings - CCR Mode ; do_menu_settings_TR_BailPres: ; menu with oTrBailPres MENU_BEGIN tTrSettings, .5 MENU_OPT_INC tTrMode, oTrMode MENU_OPT_INC tTr1stPres, oTr1stPres MENU_OPT_INC tTr2ndPres, oTr2ndPres MENU_OPT_INC tTrBailPres, oTrBailPres MENU_CALL tBack, do_return_menu_settings MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - TR Settings - pSCR Mode ; do_menu_settings_TR_both: ; menu with oTrBailPres and oTrMaxDeltaPres MENU_BEGIN tTrSettings, .6 MENU_OPT_INC tTrMode, oTrMode MENU_OPT_INC tTr1stPres, oTr1stPres MENU_OPT_INC tTr2ndPres, oTr2ndPres MENU_OPT_INC tTrBailPres, oTrBailPres MENU_DYNAMIC dyn_toggle_max_pres_diff, do_toggle_max_pres_diff MENU_CALL tBack, do_return_menu_settings MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - max. Delta Pressure for Swap Tanks Advice ; dyn_toggle_max_pres_diff: movff opt_TR_mode,WREG ; get TR mode xorlw .2 ; compare with 2 (ind.double) tstfsz WREG ; equal? FONT_COLOR_DISABLED ; NO - print in disabled color STRCAT_TEXT tTrMaxDeltaP ; output label movff char_I_max_pres_diff,lo ; get configured deltaP output_99 ; print deltaP (0-99) STRCAT_TEXT tbar ; append " bar" return ; done ;----------------------------------------------------------------------------- ; Call Function - adjust max. Delta Pressure for Swap Tanks Advice ; do_toggle_max_pres_diff: ; add 5 bar, with hard-coded max. movff char_I_max_pres_diff,lo ; get current value movlw .5 ; load increment addwf lo,F ; add increment movlw max_pres_diff_max ; load maximum value cpfsgt lo ; above maximum value? bra do_toggle_max_pres_diff_1 ; NO - store new value movlw max_pres_diff_min ; YES - load minimum value movwf lo ; - into lo do_toggle_max_pres_diff_1: movff lo,char_I_max_pres_diff ; write back new value return ; done ENDIF ; _rx_functions ;----------------------------------------------------------------------------- ; return to Settings Menu from Sub-Menu ; do_return_menu_date_time: call menu_processor_double_pop ; drop exit line and back to last line ;----------------------------------------------------------------------------- ; Settings Menu - 2nd Layer - set Time & Date ; do_menu_date_time: bsf imprint_time_date ; start imprinting current time & date bcf block_option_value ; resume displaying of option values MENU_BEGIN tSetTimeDate, .4 MENU_CALL tSetTime, do_menu_set_time MENU_CALL tSetDate, do_menu_set_date MENU_OPT_INC tDateFormat, oDateFormat MENU_CALL tBack, do_return_menu_settings MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - set Time & Date - set Time ; do_menu_set_time: bsf block_option_value ; suspend displaying of option values MENU_BEGIN tSetTime, .4 MENU_OPT_INC tSetHours, oSetHours MENU_OPT_INC tSetMinutes, oSetMinutes MENU_OPT_INC tSetSeconds, oClearSeconds MENU_CALL tBack, do_return_menu_date_time MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - set Time & Date - set Date ; do_menu_set_date: bsf block_option_value ; suspend displaying of option values MENU_BEGIN tSetDate, .4 MENU_OPT_INC tSetDay, oSetDay MENU_OPT_INC tSetMonth, oSetMonth MENU_OPT_INC tSetYear, oSetYear MENU_CALL tBack, do_return_menu_date_time MENU_END ;----------------------------------------------------------------------------- ; return to Display Settings from Sub-Menu ; do_return_dispsets_menu: bcf imprint_color_schemes ; deactivate color schemes demonstration call menu_processor_double_pop ; drop exit line and back to last line ;bra do_menu_dispsets ; continue ;----------------------------------------------------------------------------- ; Settings Menu - 2nd Layer - Display Settings - Page 1 ; do_menu_dispsets: IF _language_2!=none MENU_BEGIN tDispSets, .7 MENU_CALL tBright, do_menu_Brightness MENU_OPT_INC tLayout, oLayout MENU_OPT_INC tUnits, oUnits MENU_OPT_INC tLanguage, oLanguage MENU_OPT_INC tFlip, oFlipScreen MENU_CALL tColorScheme, do_menu_color_scheme MENU_CALL tMore, do_menu_dispsets_more MENU_END ELSE MENU_BEGIN tDispSets, .6 MENU_CALL tBright, do_menu_Brightness MENU_OPT_INC tLayout, oLayout MENU_OPT_INC tUnits, oUnits MENU_OPT_INC tFlip, oFlipScreen MENU_CALL tColorScheme, do_menu_color_scheme MENU_CALL tMore, do_menu_dispsets_more MENU_END ENDIF ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - Display Settings - Brightness ; do_menu_Brightness: MENU_BEGIN tBright, .3 MENU_OPT_INC tDvMode, oBrightness_dive MENU_OPT_INC tBrightsurface, oBrightness_surface MENU_CALL tBack, do_return_dispsets_menu MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - Display Settings - Color Schemes ; do_menu_color_scheme: bsf imprint_color_schemes ; activate color schemes demonstration ; menu with 4 leading empty menu lines to give space for the color scheme imprinting MENU_BEGIN_OFFSET tColorScheme, .2, .4 MENU_OPT_INC tColorSetDive, oColorSetDive MENU_CALL tBack, do_return_dispsets_menu MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 2nd Layer - Display Settings - Page 2 ; do_menu_dispsets_more: IFDEF _helium MENU_BEGIN tDispSets, .7 MENU_OPT_INC tVSIgraph, oVSIgraph MENU_OPT_INC tVSItext2, oVSItext MENU_OPT_INC tShowppO2, oShowppO2 MENU_OPT_INC tDepthWarning, oDepthWarn MENU_OPT_INC t2ndDepth, o2ndDepthDisp MENU_OPT_INC tTissueGraphics, oTissueGraphics MENU_CALL tBack, do_return_menu_settings_deeper MENU_END ELSE MENU_BEGIN tDispSets, .6 MENU_OPT_INC tVSIgraph, oVSIgraph MENU_OPT_INC tVSItext2, oVSItext MENU_OPT_INC tShowppO2, oShowppO2 MENU_OPT_INC tDepthWarning, oDepthWarn MENU_OPT_INC t2ndDepth, o2ndDepthDisp MENU_CALL tBack, do_return_menu_settings_deeper MENU_END ENDIF ;----------------------------------------------------------------------------- ; return to System Settings Menu from Sub-Sub-Menu ; do_return_menu_syssets_more_more: ; entry point for returns from reset sub-menu call menu_processor_pop ; drop one more stack entry ;bra do_return_menu_syssets_more ; continue ;----------------------------------------------------------------------------- ; return to System Settings Menu from Sub-Menu ; do_return_menu_syssets_more: call menu_processor_double_pop ; drop exit line and back to last line bra do_menu_syssets ; continue ;----------------------------------------------------------------------------- ; return to System Settings Menu from Piezo-Sub-Menu ; do_return_menu_syssets_piezo: call menu_processor_double_pop ; drop exit line and back to last line call TFT_ClearScreen ; clear the screen call piezo_config ; configure buttons ;bra do_menu_syssets ; continue ;----------------------------------------------------------------------------- ; Settings Menu - 2nd Layer - System Settings ; do_menu_syssets: btfsc battery_gauge_available ; piezo buttons available? bra do_menu_syssets_piezo ; YES IFDEF _compass MENU_BEGIN tSystSets, .4 ; All MENU_CALLs in this menu MENU_CALL tCompassMenu, do_menu_compass ; need to stay together on this MENU_CALL tLogOffset, do_menu_log_offset ; menu level in order to not MENU_CALL tResetMenu, do_menu_reset ; mess up the menu stack on doing MENU_CALL tBack, do_return_menu_settings ; the do_return_menu_settings ! MENU_END ELSE MENU_BEGIN tSystSets, .3 ; see above MENU_CALL tLogOffset, do_menu_log_offset ; MENU_CALL tResetMenu, do_menu_reset ; MENU_CALL tBack, do_return_menu_settings ; MENU_END ENDIF ; _compass do_menu_syssets_piezo: IFDEF _compass MENU_BEGIN tSystSets, .5 MENU_CALL tCompassMenu, do_menu_compass ; see above MENU_CALL tLogOffset, do_menu_log_offset ; MENU_CALL tResetMenu, do_menu_reset ; MENU_CALL tPiezo, do_menu_piezo ; MENU_CALL tBack, do_return_menu_settings ; MENU_END ELSE MENU_BEGIN tSystSets, .4 MENU_CALL tLogOffset, do_menu_log_offset ; see above MENU_CALL tResetMenu, do_menu_reset ; MENU_CALL tPiezo, do_menu_piezo ; MENU_CALL tBack, do_return_menu_settings ; MENU_END ENDIF IFDEF _compass ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - System Settings - Compass ; do_menu_compass: MENU_BEGIN tCompassMenu, .5 MENU_CALL tCompassCalibration, do_compass_calibration ; MENU_OPT_INC tCompassGain, oCompassGain MENU_DYNAMIC dyn_compass_cal_x, 0 MENU_DYNAMIC dyn_compass_cal_y, 0 MENU_DYNAMIC dyn_compass_cal_z, 0 MENU_CALL tBack, do_return_menu_syssets_more MENU_END ;----------------------------------------------------------------------------- ; Call Function - start Compass Calibration ; do_compass_calibration: goto compass_calibration ; code hosted in compass_ops.asm ;----------------------------------------------------------------------------- ; dynamic Title - Calibration Value X ; dyn_compass_cal_x: STRCAT_TEXT tCalX ; print label lfsr FSR0,compass_CX_f ; address calibration value X bra dyn_compass_cal_common ; continue with common part ;----------------------------------------------------------------------------- ; dynamic Title - Calibration Value Y ; dyn_compass_cal_y: STRCAT_TEXT tCalY ; print label lfsr FSR0,compass_CY_f ; address calibration value Y bra dyn_compass_cal_common ; continue with common part ;----------------------------------------------------------------------------- ; dynamic Title - Calibration Value Z ; dyn_compass_cal_z: STRCAT_TEXT tCalZ ; print label lfsr FSR0,compass_CZ_f ; address calibration value Z ;bra dyn_compass_cal_common ; continue with common part ;----------------------------------------------------------------------------- ; Helper Function to dynamic Titles - Calibration Value ; dyn_compass_cal_common: movff POSTINC0,lo ; read calibration value, low byte movff POSTINC0,hi ; read calibration value, high byte PUTC ':' ; print ":" PUTC ' ' ; print a space call convert_signed_16bit ; convert lo:hi into signed-short and adds '-' to POSTINC2 if required btfsc neg_flag ; value negative? bra dyn_compass_cal_common_1 ; YES - print value PUTC '+' ; NO - add a plus sign dyn_compass_cal_common_1: output_65535 ; print value return ; done ENDIF ; _compass ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - System Settings - Logbook Offset ; do_menu_log_offset: clrf WREG ; select an initial step size of 1 movff WREG,opt_logoffset_step ; bank-safe write to option variable (volatile option) MENU_BEGIN tLogOffset, .5 MENU_DYNAMIC dyn_logoffset_show_value, 0 MENU_OPT_INC tLogOffStepSize, oLogOffsetStep MENU_CALL tLogOffsetplus, do_log_offset_plus MENU_CALL tLogOffsetminus, do_log_offset_minus MENU_CALL tBack, do_return_menu_syssets_more MENU_END ;----------------------------------------------------------------------------- ; dynamic Title - show Logbook Offset ; dyn_logoffset_show_value: STRCPY_TEXT tLogOffsetValue ; print "Offset" in selected language call eeprom_log_offset_read ; read offset into lo:hi output_9999 ; print offset (0-9999) return ; no "_PRINT" here... ;----------------------------------------------------------------------------- ; Call Function - increment Logbook Offset ; do_log_offset_plus: rcall do_logoffset_common ; load current offset and step size ; add step size to current offset movf mpr+2,W ; get step size, low byte addwf mpr+0,F ; add to offset, low byte movf mpr+3,W ; get step size, high byte addwfc mpr+1,F ; add to offset, high byte, considering carry flag ; check if new offset is within limit MOVLI .9999,sub_a ; load max limit into sub_a MOVII mpr, sub_b ; copy new offset into sub_b call cmpU16 ; compute sub_a - sub_b, setting neg_flag if result becomes negative btfss neg_flag ; neg_flag set, i.e. new offset > 9999 ? bra do_logoffset_exit ; NO - store offset and return MOVLI .9999,mpr ; YES - limit offset to 9999 bra do_logoffset_exit ; - store offset and return ;----------------------------------------------------------------------------- ; Call Function - decrement Logbook Offset ; do_log_offset_minus: rcall do_logoffset_common ; load current offset and step size ; subtract step size from current offset movf mpr+2,W ; get step size, low byte subwf mpr+0,F ; subtract from offset, low byte movf mpr+3,W ; get step size, high byte subwfb mpr+1,F ; subtract from offset, high byte, considering borrow flag ; check if new offset is within limit btfsc STATUS,C ; borrow to propagate (B == /CARRY) ? bra do_logoffset_exit ; NO - result >= 0, store and return ;bra do_logoffset_reset ; YES - revert offset to 0 ;----------------------------------------------------------------------------- ; Helper Functions - Logbook Offset Reset & Write-Back ; do_logoffset_reset: CLRI mpr ; set offset to 0 do_logoffset_exit: goto eeprom_log_offset_write ; store offset and return ;----------------------------------------------------------------------------- ; Helper Function - compute Step Size ; do_logoffset_common: call eeprom_log_offset_read ; read current offset into mpr+1:mpr+0 movff opt_logoffset_step,ul ; get step size: 0=1, 1=10, 2=100, 3=1000 incf ul,F ; 0...3 -> 1...4 clrf mpr+3 ; clear step size, high byte movlw .1 ; set a step size of 1 movwf mpr+2 ; copy to step size, low byte dcfsnz ul,F ; ul--, did ul became 0, i.e. step size = 1 ? return ; YES - done movlw .10 ; NO - set a step size of 10 movwf mpr+2 ; - copy to step size, low byte dcfsnz ul,F ; ul--, did ul became 0, i.e. step size = 10 ? return ; YES - done movlw .100 ; NO - set a step size of 100 movwf mpr+2 ; - copy to step size, low byte dcfsnz ul,F ; ul--, did ul became 0, i.e. step size = 100 ? return ; YES - done movlw LOW .1000 ; NO - set a step size of 1000, low byte movwf mpr+2 ; - copy to step size, low byte movlw HIGH .1000 ; - set a step size of 1000, high byte movwf mpr+3 ; - copy to step size, high byte return ; - done ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - System Settings - adjust Piezo Buttons ; do_menu_piezo: MENU_BEGIN tPiezo, .5 MENU_CALL tButtonExplain1, 0 MENU_CALL tButtonExplain2, 0 MENU_OPT_INC tButtonleft, ocR_button_left ; left button sensitivity MENU_OPT_INC tButtonright, ocR_button_right ; right button sensitivity MENU_CALL tBack, do_return_menu_syssets_piezo MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 3rd Layer - System Settings - Reset Menus ; do_menu_reset: MENU_BEGIN tResetMenu, .6 MENU_CALL tBack, do_return_menu_syssets_more MENU_CALL tReboot, do_menu_reset_reboot ; confirm MENU_CALL tResetDeco, do_menu_reset_deco ; confirm MENU_CALL tResetSettings, do_menu_reset_settings ; confirm MENU_CALL tResetLogbook, do_menu_reset_logbook ; confirm MENU_CALL tResetBattery, do_menu_reset_battery ; confirm MENU_END ;----------------------------------------------------------------------------- ; Settings Menu - 4th Layer - System Settings - Reset - Reboot / FW Recovery ; do_menu_reset_reboot: IFDEF _firmware_recovery MENU_BEGIN tResetMenu2, .4 MENU_CALL tAbort, do_return_menu_syssets_more_more MENU_CALL tRebootCurFirmware, do_reboot ; reboot current firmware MENU_DYNAMIC dyn_menu_fw_backup, do_firmware_backup ; backup current firmware MENU_DYNAMIC dyn_menu_fw_restore, do_firmware_restore ; restore backup firmware MENU_END ELSE MENU_BEGIN tResetMenu2, .2 MENU_CALL tAbort, do_return_menu_syssets_more_more MENU_CALL tReboot, do_reboot ; reboot (cold start) MENU_END ENDIF ;----------------------------------------------------------------------------- ; Call Function - Reboot ; do_reboot: call ext_flash_enable_protection ; set write protection on external flash call eeprom_deco_data_write ; update deco data in EEPROM call eeprom_battery_gauge_write ; update battery gauge in EEPROM btfsc option_changed ; do the options need to be stored to EEPROM ? call option_check_and_store_all ; YES - check and store all option values in EEPROM reset ; cold-start the processor IFDEF _firmware_recovery ;----------------------------------------------------------------------------- ; dynamic Title - Firmware Backup Option ; dyn_menu_fw_backup: EEPROM_CC_READ eeprom_fw_chksum_current+.5,WREG ; read stored FW ID xorlw FW_ID ; XOR with current FW ID, equal? bnz dyn_menu_fw_backup_unable ; NO - unable to make a backup STRCPY_TEXT tBackupFirmware ; YES - print "Backup current Firmware" return ; - done dyn_menu_fw_backup_unable: STRCPY "-------" ; print dashes return ; done ;----------------------------------------------------------------------------- ; dynamic Title - Firmware Restore Option ; dyn_menu_fw_restore: STRCPY_TEXT tRecoverFirmware ; print "Recover" PUTC " " ; add a space PUTC "V" ; add a V for Version movlw 0x3C ; address firmware version in backup storage at 0x3C000A movwf ext_flash_address+2 ; ... clrf ext_flash_address+1 ; ... movlw 0x0A ; ... movwf ext_flash_address+0 ; ... FLASH_RR_READ mpr,.3 ; read backup firmware version (lo: major, hi: minor, up: beta) infsnz lo,W ; major = 0xFF ? bra dyn_menu_fw_restore_inop ; YES - no version to show bsf leftbind ; NO - print left-aligned output_99 ; - print major (0-99) PUTC '.' ; - add a dot movff hi,lo ; - get minor output_99x ; - print minor (00-99) PUTC ' ' ; - add a space movff up,lo ; - get beta/release tstfsz lo ; - release version? bra dyn_menu_fw_restore_beta ; - NO - beta STRCAT "Rel." ; - YES - append "Rel(ease)" return ; - done dyn_menu_fw_restore_beta: PUTC 'B' ; append "B(eta)" bsf leftbind ; print left-aligned output_256 ; print beta version (0-255) return ; done dyn_menu_fw_restore_inop: STRCAT "--.--" ; no recovery firmware available return ; done ;----------------------------------------------------------------------------- ; Call Function - backup Firmware ; do_firmware_backup: EEPROM_CC_READ eeprom_fw_chksum_current+.5,WREG ; read stored FW ID xorlw FW_ID ; XOR with current FW ID, equal? bnz do_firmware_abort ; NO - abort call TFT_ClearScreen ; YES - clear the screen WIN_SMALL .0, .100 ; - set position STRCPY_TEXT_PRINT tBackingUp ; - print "backing up..." call copy_fw_active_to_backup ; - copy 0x3Exxxx -> 0x3Cxxxx EEPROM_RR_READ eeprom_fw_chksum_current,buffer,.6 ; - retrieve checksum of current firmware EEPROM_RR_WRITE buffer,eeprom_fw_chksum_recovry,.6 ; - store as checksum of recovery firmware bra do_return_menu_syssets_more_more ; - done ;----------------------------------------------------------------------------- ; Call Function - restore Firmware ; do_firmware_restore: EXT_FLASH_ADDR 0x3C000A ; address firmware version in backup storage at 0x3C000A FLASH_CW_READ_0x40 ; read backup firmware major version into WREG infsnz WREG ; major = 0xFF ? bra do_firmware_abort ; YES - abort, no firmware available for restoration call TFT_ClearScreen ; NO - clear the screen WIN_SMALL .0, .100 ; - set position STRCPY_TEXT_PRINT tRestoring ; - print "restoring..." call copy_fw_backup_to_active ; - copy 0x3Cxxxx -> 0x3Exxxx EEPROM_RR_READ eeprom_fw_chksum_recovry,buffer,.6 ; - retrieve checksum of recovery firmware EEPROM_RR_WRITE buffer,eeprom_fw_chksum_current,.6 ; - store as checksum of current firmware (to be) goto comm_firmware_update_exec ; - initiate firmware update ;----------------------------------------------------------------------------- ; Helper Function - back to same menu ; do_firmware_abort: call menu_processor_pop ; back to last line bra do_menu_reset_reboot ; back to same menu ENDIF ;----------------------------------------------------------------------------- ; Settings Menu - 4th Layer - System Settings - Reset - Reset Deco ; do_menu_reset_deco: MENU_BEGIN tResetMenu2, .2 MENU_CALL tAbort, do_return_menu_syssets_more_more MENU_CALL tResetDeco, do_reset_deco ; reset deco and return to main reset menu MENU_END ;----------------------------------------------------------------------------- ; Call Function - Reset Deco ; do_reset_deco: call deco_clear_tissue ; set all tissues to absolute pressure * N2_ratio (C-code) call deco_calc_dive_interval_1min; update tissues by 1 minute to calculate current GF factor (C-code) call deco_calc_desaturation_time ; calculate desaturation and no-fly/no-altitude time (C-code) banksel common call eeprom_deco_data_write ; store updated deco data into EEPROM bra do_return_menu_syssets_more_more ;----------------------------------------------------------------------------- ; Settings Menu - 4th Layer - System Settings - Reset - Reset Settings ; do_menu_reset_settings: MENU_BEGIN tResetMenu2, .2 MENU_CALL tAbort, do_return_menu_syssets_more_more MENU_CALL tResetSettings, do_reset_settings ; reset all settings and go to surface mode MENU_END ;----------------------------------------------------------------------------- ; Call Function - Reset Settings ; do_reset_settings: call TFT_ClearScreen ; clear screen to show start of activity call option_reset_all ; reset all options to factory default call do_logoffset_reset ; reset log offset goto restart ; restart into surface mode ;----------------------------------------------------------------------------- ; Settings Menu - 4th Layer - System Settings - Reset - Reset Logbook ; do_menu_reset_logbook: MENU_BEGIN tResetMenu2, .2 MENU_CALL tAbort, do_return_menu_syssets_more_more MENU_CALL tResetLogbook, do_reset_logbook ; reset logbook and return to main reset menu MENU_END ;----------------------------------------------------------------------------- ; Call Function - Reset Logbook ; do_reset_logbook: call erase_complete_logbook ; erase complete logbook bra do_return_menu_syssets_more_more ;----------------------------------------------------------------------------- ; Settings Menu - 4th Layer - System Settings - Reset - Reset Battery ; do_menu_reset_battery: MENU_BEGIN tNewBattTitle, .2 MENU_CALL tAbort, do_return_menu_syssets_more_more MENU_CALL tYes, do_new_battery_select MENU_END ;----------------------------------------------------------------------------- ; Entry Point for Battery Selection after Power-Outage ; global new_battery_select new_battery_select: call TFT_boot ; initialize TFT (includes clear screen) call TFT_load_std_color_pallet ; load standard color pallet call TFT_Display_FadeIn ; dim up the display call menu_processor_reset ; reset menu stack ;bra do_new_battery_select ; enter menu system ;----------------------------------------------------------------------------- ; Settings Menu - 5th Layer - System Settings - Reset - Reset - Battery Selection ; do_new_battery_select: movlw .100 ; set battery level to full movwf batt_percent ; ... ; default (in cases of timeout or USB) to use old battery: call eeprom_battery_gauge_read ; retrieve stored battery gauge value from EEPROM IFDEF _screendump bsf screen_dump_avail ; enable screen dump function to prevent exiting into COMM mode immediately ELSE bsf comm_mode_disabled ; disable COMM mode to prevent exiting into COMM mode immediately ENDIF ; hardware descriptor: user changeable battery charger supported battery types ; ------------------------------------------------------------------------------------------------------------------------------------------------------- ; 0x11: BLE and battery gauge ---> OSTC 2 (old model) NO YES internal 18650 ; 0x05: analog input and battery gauge ---> OSTC 2 cR NO YES internal 18650 ; 0x15: BLE and analog input and battery gauge ---> OSTC 2 cR (2020 model) NO YES internal 18650 ; 0x33: BLE and RX module and ambient sensor and battery gauge ---> OSTC 2 TR NO YES internal 16650 ; 0x13: BLE and ambient sensor and battery gauge -+-> OSTC 2 (new model) NO YES internal 16650 ; +-> OSTC Plus YES YES 1.5V ----- NO! ----- 3.6V rechargeable ; 0x0A: optical input and ambient sensor ---> OSTC 3 (USB model) YES NO 1.5V 3.6V disposable 3.6V rechargeable ; 0x1A: BLE and optical input and ambient sensor ---> OSTC 3 (BLE model) YES NO 1.5V 3.6V disposable 3.6V rechargeable ; 0x02: ambient sensor ---> OSTC Sport (USB model) YES NO 1.5V 3.6V disposable 3.6V rechargeable ; 0x52: BLE and ambient sensor and low volt core ---> OSTC Sport (BLE model) YES NO 1.5V 3.6V disposable 3.6V rechargeable movlw 0x11 ; OSTC 2 (2015 model) cpfseq HW_descriptor bra $+4 bra use_18650_battery movlw 0x91 ; OSTC 2 (2015 model) with block write cpfseq HW_descriptor bra $+4 bra use_18650_battery movlw 0x05 ; OSTC 2 cR cpfseq HW_descriptor bra $+4 bra use_18650_battery movlw 0x15 ; OSTC 2 cR (2020 model) cpfseq HW_descriptor bra $+4 bra use_18650_battery movlw 0x85 ; OSTC 2 cR with block write cpfseq HW_descriptor bra $+4 bra use_18650_battery movlw 0xB3 ; OSTC 2 TR cpfseq HW_descriptor bra $+4 bra do_use_16650_battery movlw 0x93 ; OSTC Plus and OSTC 2 (2017 model) cpfseq HW_descriptor bra $+4 bra do_menu_new_battery_AA_charger movlw 0x13 ; OSTC Plus and OSTC 2 (2017 model), w/o block write cpfseq HW_descriptor bra $+4 bra do_menu_new_battery_AA_charger movlw 0x0A ; OSTC 3 (USB model) cpfseq HW_descriptor bra $+4 bra do_menu_new_battery_AA_no_charge movlw 0x1A ; OSTC 3 (BLE model) cpfseq HW_descriptor bra $+4 bra do_menu_new_battery_AA_no_charge movlw 0x02 ; OSTC Sport (USB model) cpfseq HW_descriptor bra $+4 bra do_menu_new_battery_AA_no_charge movlw 0x52 ; OSTC Sport (BLE model) cpfseq HW_descriptor bra $+4 bra do_menu_new_battery_AA_no_charge bra do_menu_new_battery_other_model ; any other model ;----------------------------------------------------------------------------- ; return from confirm 3.6 V rechargeable ; do_return_menu_new_bat_AA_chrg: call menu_processor_double_pop ; drop exit line and back to last line ;bra do_menu_new_battery_AA_charger ; continue ;----------------------------------------------------------------------------- ; Battery Selection for OSTC (Full selection) do_menu_new_battery_other_model: MENU_BEGIN tNewBattTitle, .6 MENU_CALL tNewBattOld, do_use_old_battery ; load data of old battery MENU_CALL tNewBattNew15, do_use_15V_disposable ; not rechargeable MENU_CALL tNewBattNew36, do_use_36V_disposable ; not rechargeable MENU_CALL tNewBattAccu, do_menu_new_battery_36V_charge ; rechargeable -> goto safety question MENU_CALL tNew16650, do_use_16650_battery ; OSTC 2 new model MENU_CALL tNew18650, use_18650_battery ; OSTC 2 (2015 model) MENU_END ;----------------------------------------------------------------------------- ; Battery Selection for OSTC Plus (charging function) TODO: and OSTC 2 new model as of now ; do_menu_new_battery_AA_charger: MENU_BEGIN tNewBattTitle, .4 MENU_CALL tNewBattOld, do_use_old_battery ; load data of old battery MENU_CALL tNewBattNew15, do_use_15V_disposable ; not rechargeable ; MENU_CALL tNewBattNew36, do_use_36V_disposable ; not rechargeable -> not allowed any more !!! MENU_CALL tNewBattAccu, do_menu_new_battery_36V_charge ; rechargeable -> goto safety question MENU_CALL tNew16650, do_use_16650_battery ; OSTC 2 new model TODO: remove when OSTC 2 new model can be separated from Plus MENU_END ;----------------------------------------------------------------------------- ; Safety Question for 3.6 V rechargeable Battery ; do_menu_new_battery_36V_charge: MENU_BEGIN tNewBattTitle, .5 MENU_CALL tConfirmChargeable1, 0 ; safety question, line 1 MENU_CALL tConfirmChargeable2, 0 ; safety question, line 2 MENU_CALL tConfirmChargeable3, 0 ; safety question, line 3 MENU_CALL tNo, do_return_menu_new_bat_AA_chrg ; NO - go back MENU_CALL tYes, do_use_36V_chargeable ; YES - confirmed rechargeable MENU_END ;----------------------------------------------------------------------------- ; Battery Selection for OSTC 3 and Sport (no charging function) ; do_menu_new_battery_AA_no_charge: MENU_BEGIN tNewBattTitle, .4 MENU_CALL tNewBattOld, do_use_old_battery ; load data of old battery MENU_CALL tNewBattNew15, do_use_15V_disposable ; not rechargeable MENU_CALL tNewBattNew36, do_use_36V_disposable ; not rechargeable MENU_CALL tNewBattAccu, do_use_36V_chargeable ; rechargeable MENU_END ;----------------------------------------------------------------------------- ; Call Function - keep old Battery ; do_use_old_battery: rcall get_battery_data ; load data of old battery goto surfloop ; proceed to surface mode ;----------------------------------------------------------------------------- ; Call Function - new 1.5 V disposable ; do_use_15V_disposable: rcall setup_new_15v bra use_batt_exit ;----------------------------------------------------------------------------- ; Call Function - new 3.6 V disposable ; do_use_36V_disposable: rcall setup_new_saft bra use_batt_exit ;----------------------------------------------------------------------------- ; Call Function - new 3.6 V rechargeable ; do_use_36V_chargeable: rcall setup_new_panasonic call reset_battery_gauge bra use_batt_exit_1 ;----------------------------------------------------------------------------- ; Call Function - build-in 16650 ; do_use_16650_battery: rcall setup_new_16650 bra use_batt_exit ;----------------------------------------------------------------------------- ; Call Function - build-in 18650 ; use_18650_battery: rcall setup_new_18650 ;bra use_batt_exit ;----------------------------------------------------------------------------- ; Helper Function - finish Battery Selection ; use_batt_exit: call reset_battery_gauge_and_lt2942 ; reset battery hard- and software gauge use_batt_exit_1: IFNDEF _screendump bcf comm_mode_disabled ; re-enable COMM mode again ENDIF goto surfloop ; exit to surface mode ;----------------------------------------------------------------------------- ; Migrate Battery Selection from Firmwares prior 2.09 ; global use_old_prior_209 use_old_prior_209: EEPROM_CC_READ eeprom_battery_type,WREG ; read battery type from EEPROM incfsz WREG,W ; battery type = 0xFF (undefined) ? return ; NO - done call lt2942_get_status ; YES - check for gauge IC movlw .3 ; - default to a 18650 (LiIon 3.7V/3.1Ah) btfss battery_gauge_available ; - OSTC 2 or cR hardware? movlw .1 ; - NO - assume a Saft (disposable 3.6 V) EEPROM_CC_WRITE WREG,eeprom_battery_type; - write battery type to EEPROM return ; - done ;----------------------------------------------------------------------------- ; Retrieve Battery Selection from EEPROM ; global get_battery_data get_battery_data: call eeprom_battery_gauge_read ; retrieve stored battery gauge value from EEPROM movff battery_type,lo ; copy retrieved battery type to lo rcall setup_new_saft ; default battery configuration incf lo,F ; (0-4) -> (1-5) dcfsnz lo,F rcall setup_new_15v ; =0 dcfsnz lo,F rcall setup_new_saft ; =1 dcfsnz lo,F rcall setup_new_panasonic ; =2 dcfsnz lo,F rcall setup_new_18650 ; =3 dcfsnz lo,F rcall setup_new_16650 ; =4 bcf use_old_batt_flag ; clear flag IFNDEF _screendump bcf comm_mode_disabled ; re-enable COMM mode again ENDIF return ; done ;----------------------------------------------------------------------------- ; Helper Functions - configure Battery Types ; disposable 1.5 Volt Alkaline setup_new_15v: bsf charge_disable ; set charging-inhibit signal bcf charge_enable ; activate charging-inhibit signal movlw .100 movwf batt_percent ; to have 1.5V batteries right after firmware update movlw .0 movwf battery_type return ; disposable 3.6 Volt Lithium setup_new_saft: bsf charge_disable ; set charging-inhibit signal bcf charge_enable ; activate charging-inhibit signal MOVLI capacity_saft_internal, battery_capacity_internal MOVLI capacity_saft, battery_capacity MOVLI offset_saft, battery_offset movlw .1 movwf battery_type return ; rechargeable user-changeable 3.7 Volt Lithium-ion setup_new_panasonic: bcf charge_disable ; release charging-inhibit signal bsf charge_enable ; tristate charging-inhibit signal MOVLI capacity_panasonic_internal, battery_capacity_internal MOVLI capacity_panasonic, battery_capacity MOVLI offset_panasonic, battery_offset movlw .2 movwf battery_type return ; rechargeable internal Lithium-ion setup_new_18650: bcf charge_disable ; release charging-inhibit signal bsf charge_enable ; tristate charging-inhibit signal CLRI battery_capacity_internal MOVLI capacity_ncr18650, battery_capacity MOVLI offset_ncr18650, battery_offset movlw .3 movwf battery_type return ; rechargeable internal Lithium-ion setup_new_16650: bcf charge_disable ; release charging-inhibit signal bsf charge_enable ; tristate charging-inhibit signal CLRI battery_capacity_internal MOVLI capacity_ur16650, battery_capacity MOVLI offset_ur16650, battery_offset movlw .4 movwf battery_type return ;----------------------------------------------------------------------------- END