Mercurial > public > hwos_code

comparison src/hwos.inc @ 604:ca4556fb60b9

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
bump to 2.99beta, work on 3.00 stable
author heinrichsweikamp
date Thu, 22 Nov 2018 19:47:26 +0100
parents ab88a7e3de94
children c5151a490d88
comparison
equal deleted inserted replaced
603:00b24fb4324d 604:ca4556fb60b9
1 ;============================================================================= 1 ;=============================================================================
2 ; 2 ;
3 ; File hwos.inc REFACTORED VERSION V2.97 SP1 3 ; File hwos.inc REFACTORED VERSION V2.99e
4 ; 4 ;
5 ; OSTC Platform definitions 5 ; OSTC Platform definitions
6 ; 6 ;
7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved.
8 ;============================================================================= 8 ;=============================================================================
9 ; HISTORY 9 ; HISTORY
10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code. 10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code
11
12 ;============================================================================= 11 ;=============================================================================
13 12
14 LIST P=18F87K22 ; change also: Configure->SelectDevice from Mplab 13 ; Low Level Settings
15 14 LIST P=18F87K22 ; compiler settings, if changed, change also: Configure -> SelectDevice in MPLAB
16 ;#DEFINE __DEBUG 15 #include <p18f87k22.inc> ; processor definitions
17 16 #include <ports.inc> ; Portmap definitions
18 ;#DEFINE french_italian ; If defined, use french and italian instead of english and german 17
19 18
20 #include <p18f87k22.inc> 19 ; Debug Mode
21 #include <ports.inc> ; Portmap 20 ;#DEFINE __DEBUG ; if defined, compile firmware in debug mode
22 21
23 ; Firmware definition 22 ; Conditional Compiles (note: not all options will fit at the same time)
24 #DEFINE softwareversion_x .2 ; Software version XX.YY 23 #DEFINE _screendump ; if defined, compile screen dump into firmware (default: included )
25 #DEFINE softwareversion_y .98 ; Software version XX.YY 24 #DEFINE _rx_functions ; if defined, compile RX (OSTC TR) into firmware (default: included *)
26 #DEFINE softwareversion_beta .0 ; 0= release, 1=beta, 2=SP1, 3=SP2, ... 25 ;#DEFINE _ostc_logo ; if defined, compile OSTC logo into firmware (default: not included )
27 26 ;#DEFINE _cave_mode ; if defined, compile cave mode into firmware (default: not included *) ## OPTION IS UNDER CONSTRUCTION ##
28 ; Firmware version will appear in "Change Firmware" style 27 ;
29 #DEFINE firmware_expire_year .19 28 ; * option needs to be included / excluded in p2_deco.c, too!
30 #DEFINE firmware_expire_month .8 29
31 #DEFINE firmware_expire_day .27 30
32 31 ; Language Selection
32 #DEFINE none 0 ; no language selected
33 #DEFINE en 1 ; English
34 #DEFINE de 2 ; German
35 #DEFINE fr 3 ; French
36 #DEFINE it 4 ; Italian
37
38 #DEFINE _language_1 en ; first or single language - must be set to en, de, fr, or it, defaults to en
39 #DEFINE _language_2 none ; second language or none
40
41
42 ; Firmware Version
43 #DEFINE softwareversion_x .2 ; Software Version, major (1 - 9)
44 #DEFINE softwareversion_y .99 ; Software Version, minor (1 - 99)
45 #DEFINE softwareversion_beta .0 ; 0= Release, 1= Beta-1, 2= Beta-2, ... (0 - 255)
46
47 ; Firmware Expiration Date, will cause version to be displayed in "Update Firmware" style after the following date:
48 #DEFINE firmware_expire_year .18
49 #DEFINE firmware_expire_month .12
50 #DEFINE firmware_expire_day .31
51
52 ; Magic Cookie Definition
33 #DEFINE comm_service_key 0xABCDEF 53 #DEFINE comm_service_key 0xABCDEF
54
55 ; Logo Address Vectors
56 #DEFINE hw_logo_block 0x01E000 ; color image data for heinrichsweikamp logo
57 #DEFINE usb_ble_logo_block 0x01EEDE ; color image data for USB or BLE logo
58
34 59
35 ;-----------------------------EEPROM DATA ------------------------------------ 60 ;-----------------------------EEPROM DATA ------------------------------------
36 ; Automatic reset of all options when this is changed: 61 ; Automatic reset of all options when this is changed:
37 #define eeprom_opt_serial 0x0006 ; Version 0.6 62 #DEFINE eeprom_opt_serial 0x0008 ; Version 0.8
38 ;----------------------------------------------------------------------------- 63 ;-----------------------------------------------------------------------------
39 64
40 #DEFINE CCP1CON_VALUE b'00001100' ; PWM1 for LED dimming 65 #DEFINE CCP1CON_VALUE b'00001100' ; PWM1 for LED dimming
41 #DEFINE T2CON_ECO b'00000100' ; 1:1 Postscaler, 1:1 Prescaler, Timer 2 start -> 980Hz (Good compromise of no-flicker and efficiency) 66 #DEFINE T2CON_ECO b'01111110' ;
42 #DEFINE T2CON_NORMAL b'00001110' 67 #DEFINE T2CON_NORMAL b'01111110' ;
43 #DEFINE T2CON_FASTEST b'00001110' ; 1:2 Postscaler, 1:16 Prescaler, Timer 2 start -> 1960Hz (no-flicker) 68 #DEFINE T2CON_FASTEST b'01111110' ;
69
70 ; Divemode Custom View Indexes - Attention: these numbers need to be in line with the jump tables in customview.asm!
71 #DEFINE index_avr_stopwatch .1 ; average depth and stopwatch
72 #DEFINE index_compass_dm .2 ; compass
73 #DEFINE index_ppo2_sensors .3 ; ppO2 sensors
74 #DEFINE index_sensor_check .4 ; sensor check
75 #DEFINE index_pscr_info .5 ; pSCR data
76 #DEFINE index_pressures_SAC .6 ; tank pressure and SAC rate
77 #DEFINE index_gas_needs_ascent .7 ; gas needs for ascent / cave return
78 #DEFINE index_decoplan .8 ; deco plan
79 #DEFINE index_ceiling_GF_tissue .9 ; ceiling, current GF and tissues
80 #DEFINE index_CNS .10 ; CNS values
81 #DEFINE index_ppo2_ead_end_cns .11 ; ppO2, END/EAD and CNS
82 #DEFINE index_gf_factors .12 ; GF factors
83 #DEFINE index_clock_batt_surfpress .13 ; clock, battery and surface pressure
84 #DEFINE index_cv_dm_max .13 ; highest index in use in dive mode custom view
44 85
45 ; Timing for button hold-down flags 86 ; Timing for button hold-down flags
46 #DEFINE TMR1H_VALUE_FIRST .255-.128 ; in steps of 7,8125ms -> 1s 87 #DEFINE TMR1H_VALUE_FIRST .255-.128 ; in steps of 7.8125 ms -> 1 s
47 #DEFINE TMR1H_VALUE_CONT .255-.32 ; in steps of 7,8125ms -> 0.25s 88 #DEFINE TMR1H_VALUE_CONT .255-.32 ; in steps of 7.8125 ms -> 0.25 s
48 #DEFINE TMR1H_VALUE_CONT_DIVE .255-.64 ; in steps of 7,8125ms -> 0.5s 89 #DEFINE TMR1H_VALUE_CONT_DIVE .255-.64 ; in steps of 7.8125 ms -> 0.5 s
49 90
50 ; Color Definitions: 8Bit RGB b'RRRGGGBB' 91 ; Color Definitions: 8 bit RGB b'RRRGGGBB'
51 #DEFINE color_red b'11100000' ; (7,0,0) 92 #DEFINE color_red b'11100000' ; (7,0,0)
52 #DEFINE color_dark_red b'10000101' ; (4,1,1) 93 #DEFINE color_dark_red b'10000101' ; (4,1,1)
53 #DEFINE color_violet b'11101011' ; (7,2,3) 94 #DEFINE color_violet b'11101011' ; (7,2,3)
54 #DEFINE color_blue b'11000111' ; (6,1,3) 95 #DEFINE color_blue b'11000111' ; (6,1,3)
55 #DEFINE color_green b'00011100' ; (0,7,0) 96 #DEFINE color_green b'00011100' ; (0,7,0)
68 #DEFINE FT_TINY .0 109 #DEFINE FT_TINY .0
69 #DEFINE FT_SMALL .1 110 #DEFINE FT_SMALL .1
70 #DEFINE FT_MEDIUM .2 ; not used 111 #DEFINE FT_MEDIUM .2 ; not used
71 #DEFINE FT_LARGE .3 ; not used 112 #DEFINE FT_LARGE .3 ; not used
72 113
73 ; External O2 cell input parameters 114 ; External O2 cell input Parameters
74 #DEFINE min_mv .80 ; = 8mV 115 #DEFINE min_mv .80 ; = 8 mV
75 #DEFINE max_mv .2500 ; = 250mV 116 #DEFINE max_mv .2500 ; = 250 mV
76 #DEFINE ignore_mv .3500 ; = 350mV (to suppress ghost readings for long, open cables) 117 #DEFINE ignore_mv .3500 ; = 350 mV (to suppress ghost readings for long, open cables)
77 118
78 ; Profile recording parameters 119 ; Profile Recording Parameters
79 #DEFINE logbook_profile_version 0x24 120 #DEFINE logbook_profile_version 0x24
80 #DEFINE samplingrate_apnoe .1 ; [seconds] 121 #DEFINE samplingrate_apnoe .1 ; [seconds]
81 122
82 ; Warning: Divisors must be <.16 ! 123 ; Attention: Divisors must be < 16 !
83 #DEFINE div_temperature .6 ; x samplingrate [s] 124 #DEFINE div_temperature .6 ; x sampling rate [s]
84 #DEFINE div_deco .6 ; x samplingrate [s] 125 #DEFINE div_deco .6 ; x sampling rate [s]
85 #DEFINE div_gf .12 ; x samplingrate [s] 126 #DEFINE div_gf .12 ; x sampling rate [s]
86 #DEFINE div_ppo2_sensors .2 ; x samplingrate [s] 127 #DEFINE div_ppo2_sensors .2 ; x sampling rate [s]
87 #DEFINE div_decoplan .12 ; x samplingrate [s] 128 #DEFINE div_decoplan .12 ; x sampling rate [s]
88 #DEFINE div_cns .12 ; x samplingrate [s] 129 #DEFINE div_cns .12 ; x sampling rate [s]
89 #DEFINE div_tank .0 ; x samplingrate [s] 130 #DEFINE div_tank .0 ; x sampling rate [s]
90 131
91 ; Warning: Information lengths must be <.16 ! 132 ; Attention: Information Lengths must be < 16 !
92 #DEFINE infolength_temperature .2 ; [byte] 133 #DEFINE infolength_temperature .2 ; [byte]
93 #DEFINE infolength_deco .2 ; [byte] 134 #DEFINE infolength_deco .2 ; [byte]
94 #DEFINE infolength_gf .1 ; [byte] 135 #DEFINE infolength_gf .1 ; [byte]
95 #DEFINE infolength_ppo2_sensors .9 ; [byte] 136 #DEFINE infolength_ppo2_sensors .9 ; [byte]
96 #DEFINE infolength_decoplan .15 ; [byte] 137 #DEFINE infolength_decoplan .15 ; [byte]
97 #DEFINE infolength_cns .2 ; [byte] 138 #DEFINE infolength_cns .2 ; [byte]
98 #DEFINE infolength_tank .0 ; [byte] 139 #DEFINE infolength_tank .0 ; [byte]
99 140
100 ; "Better Gas" behavior 141 ; RX Functions (no conditional compile because defines are used in options_table)
101 ; better_gas_window <= minimum_change_depth ! 142 #DEFINE rx_packet_overdue_timeout .60 ; [seconds]
102 ; minimum_change_depth >=5 ! 143 #DEFINE max_pres_diff_min .5 ; [bar] minimum selectable pressure difference for ind.double mode
103 #DEFINE minimum_change_depth .3 ; [m] 144 #DEFINE max_pres_diff_max .50 ; [bar] maximum selectable pressure difference for ind.double mode
104 #DEFINE better_gas_window_neg .3 ; [m] (Depth above change depth) 145
105 #DEFINE better_gas_window_pos .1 ; [m] (Depth below change depth, if ppO2<opt_ppO2_max) 146 ; Gas Needs Settings
106 147 #DEFINE min_tank_size .1 ; [liter]
107 ; Dive mode limits and thresholds 148 #DEFINE max_tank_size .40 ; [liter]
149 #DEFINE min_fill_press .5 ; [0 bar] value is in multiples of 10 bar
150 #DEFINE max_fill_press .29 ; [0 bar] value is in multiples of 10 bar, no 300 bar due to too far beyond ideal gas laws
151
152
153 ;; "Better Gas" Behavior
154 ;#DEFINE minimum_change_depth .2 ; [m]
155
156 ; Dive Mode Limits and Thresholds
108 #DEFINE start_dive_threshold .100 ; [cm] 157 #DEFINE start_dive_threshold .100 ; [cm]
109 #DEFINE high_altitude_dive_threshold .300 ; [cm] 158 #DEFINE high_altitude_dive_threshold .300 ; [cm]
110 #DEFINE apnoe_timeout .15 ; [min] 159 #DEFINE apnoe_timeout .15 ; [min]
111 #DEFINE divemode_menuview_timeout .10 ; [s] 160 #DEFINE divemode_menuview_timeout .10 ; [s]
112 #DEFINE divemode_menu_timeout .30 ; [s] 161 #DEFINE divemode_menu_timeout .30 ; [s]
113 162
114 #DEFINE ppo2_warning_low_lowest .16 ; [cbar] (Min. value) for minimum on OC 163 #DEFINE ppo2_warning_low_lowest .15 ; [cbar] (min. value) for minimum on OC
115 #DEFINE ppo2_warning_low_default .19 ; [cbar] (Default value) for minimum on OC 164 #DEFINE ppo2_warning_low_default .17 ; [cbar] (default value) for minimum on OC
116 #DEFINE ppo2_warning_low_highest .21 ; [cbar] (Max. value) for minimum on OC 165 #DEFINE ppo2_warning_low_highest .21 ; [cbar] (max. value) for minimum on OC
117 166
118 #DEFINE ppo2_warning_loop_lowest .20 ; [cbar] (Min. value) for minimum on loop 167 #DEFINE ppo2_warning_loop_lowest .20 ; [cbar] (min. value) for minimum on loop
119 #DEFINE ppo2_warning_loop_default .40 ; [cbar] (Default Value) for minimum on loop 168 #DEFINE ppo2_warning_loop_default .40 ; [cbar] (default Value) for minimum on loop
120 #DEFINE ppo2_warning_loop_highest .60 ; [cbar] (Max. value) for minimum on loop 169 #DEFINE ppo2_warning_loop_highest .60 ; [cbar] (max. value) for minimum on loop
121 170
122 #DEFINE ppo2_warning_high_lowest .120 ; [cbar] (Min. value) for maximum in none-deco phase 171 #DEFINE ppo2_warning_high_lowest .120 ; [cbar] (min. value) for maximum in none-deco phase
123 #DEFINE ppo2_warning_high_default .140 ; [cbar] (Default value) for maximum in none-deco phase 172 #DEFINE ppo2_warning_high_default .140 ; [cbar] (default value) for maximum in none-deco phase
124 #DEFINE ppo2_warning_high_highest .160 ; [cbar] (Max. value) for maximum in none-deco phase 173 #DEFINE ppo2_warning_high_highest .160 ; [cbar] (max. value) for maximum in none-deco phase
125 174
126 #DEFINE ppo2_warning_deco_lowest .120 ; [cbar] (Min. value) for maximum in deco phase 175 #DEFINE ppo2_warning_deco_lowest .120 ; [cbar] (min. value) for maximum in deco phase
127 #DEFINE ppo2_warning_deco_default .160 ; [cbar] (Default Value) for maximum in deco phase 176 #DEFINE ppo2_warning_deco_default .160 ; [cbar] (default Value) for maximum in deco phase
128 #DEFINE ppo2_warning_deco_highest .160 ; [cbar] (Max. value) for maximum in deco phase 177 #DEFINE ppo2_warning_deco_highest .160 ; [cbar] (max. value) for maximum in deco phase
129 178
130 #DEFINE depth_warn_mbar .13000 ; [mbar] 179 #DEFINE depth_warn_mbar .13000 ; [mbar]
131 #DEFINE wake_up_from_sleep .1160 ; [mbar] 180 #DEFINE wake_up_from_sleep .1160 ; [mbar]
132 #DEFINE simulator_timeout .15 ; [s] 181 #DEFINE simulator_timeout .15 ; [s]
133 182
134 #DEFINE sensor_voting_logic_threshold .10 ; Threshold in 0.01bar 183 #DEFINE sensor_voting_logic_threshold .10 ; threshold in 0.01 bar
135 184
136 ; Surface mode limits and thresholds 185 ; Surface Mode Limits and Thresholds
137 #DEFINE high_altitude_threshold .880 ; [mbar] 186 #DEFINE high_altitude_threshold .880 ; [mbar]
138 #DEFINE max_surfpressure .1080 ; [mbar] 187 #DEFINE max_surfpressure .1080 ; [mbar]
139 #DEFINE timeout_surfacemode .90 ; [s] 188 #DEFINE timeout_surfacemode .240 ; [s] ; ex 90 seconds
140 #DEFINE timeout_calibrate_menu .240 ; [s] 189 #DEFINE timeout_calibrate_menu .240 ; [s]
190 #DEFINE timeout_tanksetup_menu .240 ; [s]
141 #DEFINE timeout_ccr_surface .240 ; [s] 191 #DEFINE timeout_ccr_surface .240 ; [s]
142 192
143 ; Decomodel paramters 193 ; Deco-Model Parameters
144 #DEFINE deco_distance .10 ; [dm] 194 #DEFINE deco_distance .10 ; [dm]
145 195
146 ; Color-code parameters for the divemode 196 ; Color-Code Parameters for the Dive Mode
147 #DEFINE color_code_velocity_warn_high .11 ; [m/min] 197 #DEFINE color_code_velocity_warn_high .11 ; [m/min]
148 #DEFINE color_code_velocity_attn_high .10 ; [m/min] 198 #DEFINE color_code_velocity_attn_high .10 ; [m/min]
149 #DEFINE velocity_display_threshold_1 .3 ; [m/min] 199 #DEFINE velocity_display_threshold_1 .3 ; [m/min]
150 200
151 ; Battery thresholds 201 ; Battery Thresholds
152 #DEFINE lithium_36v_empty .2400 ; [mV] Saft 3,6V LS14500 AA - threshold for battery percent display 202 #DEFINE lithium_36v_empty .2400 ; [mV] Saft 3.6 V LS14500 AA - threshold for battery percent display
153 #DEFINE lithium_36v_low .2000 ; [mV] (Must be bigger then aa_15v_high!) 203 #DEFINE lithium_36v_low .2000 ; [mV] (must be bigger than aa_15v_high!)
154 #DEFINE aa_15v_high .1550 ; [mV] Energizer 1,5V E2 AA 204 #DEFINE aa_15v_high .1550 ; [mV] Energizer 1.5 V E2 AA
155 #DEFINE aa_15v_low .1100 ; [mV] According to Energizer Datasheet EBC-4201R, Page 2 205 #DEFINE aa_15v_low .1100 ; [mV] according to Energizer data sheet EBC-4201R, page 2
156 #DEFINE color_code_battery_low .10 ; [%] 206 #DEFINE color_code_battery_low .10 ; [%]
157 #DEFINE battery_show_level .24 ; [%] 207 #DEFINE battery_show_level .24 ; [%]
158 208
159 ; 3,6V battery sensing data points at 70mA load 209 ; 3.6 Volt Battery sensing Data Points at 70 mA Load
160 #DEFINE lithium_36v_75 .3000 ; [mV] 210 #DEFINE lithium_36v_75 .3000 ; [mV]
161 #DEFINE lithium_36v_50 .2900 ; [mV] 211 #DEFINE lithium_36v_50 .2900 ; [mV]
162 #DEFINE lithium_36v_25 .2600 ; [mV] 212 #DEFINE lithium_36v_25 .2600 ; [mV]
163 #DEFINE lithium_36v_10 .2500 ; [mV] 213 #DEFINE lithium_36v_10 .2500 ; [mV]
164 214
165 ; Capacity for 2.4Ah Saft LS14500 and 0.8Ah Panasonic UR14500P 215 ; Capacity for 2.4 Ah Saft LS14500 and 0.8 Ah Panasonic UR14500P
166 ; battery_gauge:6 is nAs 216 ; battery_gauge:6 is nAs
167 ; devide through 65536 217 ; devide through 65536
168 ; a) devide through 364 -> Result is in percent of a 2.4Ah Battery 218 ; a) devide through 364 -> result is in percent of a 2.4 Ah battery
169 ; or b) devide through 121 -> Result is in percent of a 0.8Ah Battery 219 ; or b) devide through 121 -> result is in percent of a 0.8 Ah battery
170 220
171 ; For internal battery gauging 221 ; internal Battery Gauging
172 #DEFINE internal_saft_capacity .364 222 #DEFINE internal_saft_capacity .364
173 #DEFINE internal_panasonic_capacity .121 223 #DEFINE internal_panasonic_capacity .121
174 224
175 ; For gauge IC 225 ; Gauge IC
176 #DEFINE saft_capacity .281 ; 2.4Ah/0.085mAh/100 [%] 226 #DEFINE saft_capacity .281 ; 2.4Ah/0.085mAh/100 [%]
177 #DEFINE saft_offset .37300 ; 65536-(2.4Ah/0.085mAh) 227 #DEFINE saft_offset .37300 ; 65536-(2.4Ah/0.085mAh)
178 228
179 #DEFINE panasonic_capacity .94 ; 0.8Ah/0.085mAh/100 [%] 229 #DEFINE panasonic_capacity .94 ; 0.8Ah/0.085mAh/100 [%]
180 #DEFINE panasonic_offset .56124 ; 65536-(0.8Ah/0.085mAh) 230 #DEFINE panasonic_offset .56124 ; 65536-(0.8Ah/0.085mAh)
192 #DEFINE current_speed_normal .4027 242 #DEFINE current_speed_normal .4027
193 #DEFINE current_speed_fastest .5050 243 #DEFINE current_speed_fastest .5050
194 #DEFINE current_ir_receiver .139 244 #DEFINE current_ir_receiver .139
195 #DEFINE current_compass .28 245 #DEFINE current_compass .28
196 246
197 ; Brightness thresholds (between zero (off) and 255 (max. power)) 247 ; Brightness Thresholds (between zero (off) and 255 (max. power))
198 #DEFINE ambient_light_max_high_36V .170 248 #DEFINE ambient_light_max_high_36V .170
199 #DEFINE ambient_light_max_high_cr .240 249 #DEFINE ambient_light_max_high_cr .240
200 #DEFINE ambient_light_max_high_15V .140 250 #DEFINE ambient_light_max_high_15V .140
201 #DEFINE ambient_light_min_high .35 251 #DEFINE ambient_light_min_high .35
202 #DEFINE ambient_light_max_medium .125 252 #DEFINE ambient_light_max_medium .125
203 #DEFINE ambient_light_min_medium .25 253 #DEFINE ambient_light_min_medium .25
204 #DEFINE ambient_light_max_eco .70 254 #DEFINE ambient_light_max_eco .70
205 #DEFINE ambient_light_min_eco .10 ; must be the lowest value! 255 #DEFINE ambient_light_min_eco .10 ; must be the lowest value!
206 256
207 ; IR Link timeout 257 ; IR Link Timeout
208 #DEFINE ir_timeout_value .64 ; multiples of 62,5ms 258 #DEFINE ir_timeout_value .64 ; multiples of 62.5 ms
209 259
210 ; Sp control constants 260 ; Setpoint Control
211 #DEFINE surface_sp .50 ; in cbar 261 #DEFINE surface_sp .50 ; in cbar
212 262
213 ; Gaslist hard-coded limits 263 ; Gaslist hard-coded Limits
214 #DEFINE gaslist_min_o2 .5 ; Minimum O2 [%] 264 #DEFINE gaslist_min_o2 .6 ; minimum O2 [%]
215 #DEFINE gaslist_max_He .100-gaslist_min_o2 ; Maximum He [%] 265 #DEFINE gaslist_max_He .100-gaslist_min_o2 ; maximum He [%]
216 266 #DEFINE gaslist_max_change_depth .99 ; max. change depth [m]
217 #DEFINE gaslist_max_change_depth .99 ; Max. change depth [m] 267 #DEFINE gaslist_sp_stepsize .10 ; steps for setpoint setup [cbar]
218 #DEFINE gaslist_sp_stepsize .10 ; Steps for Setpoint Setup [cbar] 268 #DEFINE gaslist_sp_max .160 ; max. setpoint [cbar]
219 #DEFINE gaslist_sp_max .160 ; Max. Setpoint [cbar] 269 #DEFINE gaslist_sp_min .50 ; min. setpoint [cbar]
220 #DEFINE gaslist_sp_min .50 ; Min. Setpoint [cbar] 270
221 271 ; Compass Display
222 ; Compass display
223 #DEFINE compass_fast_treshold .9 ; show new heading instantly if new and old > compass_fast_treshold 272 #DEFINE compass_fast_treshold .9 ; show new heading instantly if new and old > compass_fast_treshold
224 #DEFINE compass_averaging .10 ; numbers of extra averaging 273 #DEFINE compass_averaging .10 ; numbers of extra averaging
225 274
226 ; Bit Masks for communication with p2_deco.c - char_O_deco_status 275
227 #define DECO_STATUS_MASK .3 276 ; Bit Flags for Communication with p2_deco.c - char_O_main_status
228 277 #DEFINE DECO_COMPLETED_NORM .0 ; the calculation of a normal deco plan has just been completed
229 ; Bit Flags for communication with p2_deco.c - char_O_deco_status 278 #DEFINE DECO_COMPLETED_ALT .1 ; the calculation of an alternative deco plan has just been completed
230 #define DECO_STATUS_0_FLAG .0
231 #define DECO_STATUS_1_FLAG .1
232 #define DECO_MODE_LOOP_FLAG .2
233 #define DECO_MODE_PSCR_FLAG .3
234 #define DECO_PLAN_FLAG .4
235 #define DECO_CNS_FLAG .5
236 #define DECO_VOLUME_FLAG .6
237 #define DECO_ASCENT_FLAG .7
238
239 ; Bit Flags for communication with p2_deco.c - char_O_main_status
240 ; .0 ; unused
241 ; .1 ; unused
242 ; DECO_MODE_LOOP_FLAG .2 ; defined below, also used for char_O_main_status 279 ; DECO_MODE_LOOP_FLAG .2 ; defined below, also used for char_O_main_status
243 ; DECO_MODE_PSCR_FLAG .3 ; defined below, also used for char_O_main_status 280 ; DECO_MODE_PSCR_FLAG .3 ; defined below, also used for char_O_main_status
244 #define DECO_GASCHANGE_OVRD .4 281 #DEFINE DECO_Z_FACTOR_FLAG .4 ; =1: figure in Z factor when converting gas volumes <-> pressures
245 ; .5 ; unused 282 #DEFINE DECO_CAVE_MODE .5 ; =1: compute ascent and gas needs using backtracking data
246 #define DECO_BOTTOM_FLAG .6 283 #DEFINE DECO_BOTTOM_FLAG .6 ; =1: compute with bottom time (deco calculator), =0: with extra time (dive mode)
247 ; .7 ; unused 284 #DEFINE DECO_TR_FUNCTIONS .7 ; =1: compute TR functions (pressure readings)
248 285
249 ; Bit Values for communication with p2_deco.c 286 ; Bit Flags for Communication with p2_deco.c - char_O_deco_status
250 #define DECO_STATUS_INIT .3 287 #DEFINE DECO_STATUS_0_FLAG .0
251 #define DECO_MODE_LOOP .4 288 #DEFINE DECO_STATUS_1_FLAG .1
252 #define DECO_MODE_PSCR .8 289 #DEFINE DECO_MODE_LOOP_FLAG .2
253 #define DECO_PLAN_ALTERNATE .16 290 #DEFINE DECO_MODE_PSCR_FLAG .3
254 #define DECO_CNS_CALCULATE .32 291 #DEFINE DECO_PLAN_FLAG .4
255 #define DECO_VOLUME_CALCULATE .64 292 #DEFINE DECO_BAILOUT_FLAG .5 ; =1: do a bailout calculation, i.e. allow gas switches before first deco stop
256 #define DECO_ASCENT_DELAYED .128 293 #DEFINE DECO_VOLUME_FLAG .6
257 294 #DEFINE DECO_ASCENT_FLAG .7
258 ; Bit Flags for char_O_deco_warnings 295
259 #define IBCD_warning .0 296 ; Bit Flags for Communication with p2_deco.c - char_O_deco_warnings
260 #define IBCD_warning_lock .1 297 #DEFINE IBCD_warning .0
261 #define mbubble_warning .2 298 #DEFINE IBCD_warning_lock .1
262 #define mbubble_warning_lock .3 299 #DEFINE mbubble_warning .2
263 #define outside_warning .4 300 #DEFINE mbubble_warning_lock .3
264 #define outside_warning_lock .5 301 #DEFINE outside_warning .4
265 #define stoptable_overflow .6 302 #DEFINE outside_warning_lock .5
266 #define deco_flag .7 303 #DEFINE outside_attention .6
267 304 #DEFINE stoptable_overflow .7
268 ; Bit Flags for status on CHARs 305
269 #define char_invalid_flag .7 306 ; Bit Flags for Communication with p2_deco.c - char_O_deco_info
270 307 #DEFINE deco_flag .0 ; =1: in deco mode, deco ppO2 levels permitted
271 ; Bit Flags for status on INTs 308 #DEFINE ind_double_switch .1 ; =1: switch to other tank advice active
272 #define int_invalid_flag .2 309 #DEFINE deco_steady .2 ; =1: fTTS is = TTS (not updated when in bailout mode)
273 #define int_not_yet_computed .3 310 #DEFINE deco_decreasing .3 ; =1: fTTS is < TTS (not updated when in bailout mode)
274 #define int_is_zero .3 311 #DEFINE deco_ceiling .4 ; =1: ceiling depth > 0
275 #define int_low_flag .4 312 #DEFINE gas_needs_cave .5 ; =1: indicated gas needs are calculated in cave mode
276 #define int_high_flag .5 313
277 #define int_attention_flag .6 314 ; Bit Flags for Status on Variables of Type char
278 #define int_warning_flag .7 315 #DEFINE char_transmitter_lost .6
316 #DEFINE char_invalid_flag .7
317 #DEFINE char_transmitter_low_bat .7
318
319 ; Bit Flags for Status on Variables of Type int (Flags are placed in the upper byte)
320 #DEFINE int_invalid_flag .2
321 #DEFINE int_not_yet_computed .3
322 #DEFINE int_is_zero .3
323 #DEFINE int_low_flag .4
324 #DEFINE int_not_avail_flag .4
325 #DEFINE int_high_flag .5
326 #DEFINE int_outdated_flag .5
327 #DEFINE int_attention_flag .6
328 #DEFINE int_warning_flag .7
279 329
280 ;----------------------------------------------------------------------------- 330 ;-----------------------------------------------------------------------------
281 ; Flags 331 ; Flags
282 332
283 ; Hardware defines 333 ; Hardware Descriptor 1
284 #DEFINE battery_gauge_available hardware_flag,0 ; =1: OSTC has rechargeable battery with battery management chip 334 #DEFINE battery_gauge_available hardware_flag1,0 ; =1: OSTC has rechargeable battery with battery management chip
285 #DEFINE ambient_sensor hardware_flag,1 ; =1: OSTC has an ambient light sensor 335 #DEFINE ambient_sensor hardware_flag1,1 ; =1: OSTC has an ambient light sensor
286 #DEFINE analog_o2_input hardware_flag,2 ; =1: OSTC has analog inputs and S8 digital 336 #DEFINE analog_o2_input hardware_flag1,2 ; =1: OSTC has analog inputs and S8 digital
287 #DEFINE optical_input hardware_flag,3 ; =1: OSTC has an digital optical input 337 #DEFINE optical_input hardware_flag1,3 ; =1: OSTC has an digital optical input
288 #DEFINE ble_available hardware_flag,4 ; =1: OSTC has an BLE module 338 #DEFINE ble_available hardware_flag1,4 ; =1: OSTC has an BLE module
289 #DEFINE ostc_rx_present hardware_flag,5 ; =1: OSTC RX circuity present 339 #DEFINE ostc_rx_present hardware_flag1,5 ; =1: OSTC has RX circuity
290 ; hardware_flag,6 ; unused 340 ; hardware_flag1,6 ; --- unused
291 ; hardware_flag,7 ; unused 341 ; hardware_flag1,7 ; --- unused
292 342
343 ; Hardware Descriptor 2
344 #DEFINE screen_type hardware_flag2,0 ; =1: display 1, =0; display 0
345 #DEFINE compass_type hardware_flag2,1 ; =1: compass 1, =0: compass 0
346 #DEFINE compass_type2 hardware_flag2,2 ; =1: compass 2, =0: compass 0 or 1
347 #DEFINE analog_switches hardware_flag2,3 ; =1: analog switches available
348 ; hardware_flag2,4 ; --- unused
349 ; hardware_flag2,5 ; --- unused
350 ; hardware_flag2,6 ; --- unused
351 ; hardware_flag2,7 ; --- unused
352
353 ; Control of numerical Output
293 #DEFINE leftbind cvt_flags+0,0 354 #DEFINE leftbind cvt_flags+0,0
294 #DEFINE ignore_digit3 cvt_flags+0,1 355 #DEFINE ignore_digit3 cvt_flags+0,1
295 #DEFINE ignore_digit4 cvt_flags+0,2 356 #DEFINE ignore_digit4 cvt_flags+0,2
296 #DEFINE ignore_digit5 cvt_flags+0,3 357 #DEFINE ignore_digit5 cvt_flags+0,3
297 #DEFINE enable_screen_dumps cvt_flags+0,4 ; =1: Ignore vin_usb, wait for "l" command (Screen dump 358 ; cvt_flags+0,4 ; --- unused
298 #DEFINE screen_type cvt_flags+0,5 ; =1: display1, =0; display0 359 ; cvt_flags+0,5 ; --- unused
299 #DEFINE compass_type cvt_flags+0,6 ; =1: compass1, =0: compass0 360 ; cvt_flags+0,6 ; --- unused
300 #DEFINE analog_switches cvt_flags+0,7 ; =1: Analog switches available 361 ; cvt_flags+0,7 ; --- unused
301 362
302 #define pre_zero_flag cvt_flags+1,0 363 #DEFINE pre_zero_flag cvt_flags+1,0
303 #define all_zeros_flag cvt_flags+1,1 364 #DEFINE all_zeros_flag cvt_flags+1,1
304 #define DP_done cvt_flags+1,2 365 #DEFINE DP_done cvt_flags+1,2
305 #define DP_done2 cvt_flags+1,3 366 #DEFINE DP_done2 cvt_flags+1,3
306 #define show_last3 cvt_flags+1,4 367 #DEFINE show_last3 cvt_flags+1,4
307 #define leading_zeros cvt_flags+1,5 368 #DEFINE leading_zeros cvt_flags+1,5
308 #define show_last4 cvt_flags+1,6 369 #DEFINE show_last4 cvt_flags+1,6
309 #DEFINE compass_type2 cvt_flags+1,7 ; =1: Compass2, =0: Compass1 or compass0 370 ; cvt_flags+1,7 ; --- unused
310
311 371
312 ; HUD Status Byte 372 ; HUD Status Byte
313 #DEFINE hud_connection_ok hud_status_byte,0 ; =1 -> HUD connection ok 373 #DEFINE hud_connection_ok hud_status_byte,0 ; =1 HUD connection ok
314 ; hud_status_byte,1 ; =1 -> HUD is calibrated 374 ; hud_status_byte,1 ; =1 HUD is calibrated
315 ; hud_status_byte,2 ; =1 -> HUD Battery is low (<3000mV) 375 ; hud_status_byte,2 ; =1 HUD battery is low (<3000mV)
316 #DEFINE sensor1_active hud_status_byte,3 ; =1: Sensor1 is active 376 #DEFINE sensor1_active hud_status_byte,3 ; =1: sensor 1 is active
317 #DEFINE sensor2_active hud_status_byte,4 ; =1: Sensor2 is active 377 #DEFINE sensor2_active hud_status_byte,4 ; =1: sensor 2 is active
318 #DEFINE sensor3_active hud_status_byte,5 ; =1: Sensor3 is active 378 #DEFINE sensor3_active hud_status_byte,5 ; =1: sensor 3 is active
319 ; hud_status_byte,6 ; unused in stand-alone HUD 379 ; hud_status_byte,6 ; --- unused in stand-alone HUD
320 ; hud_status_byte,7 ; unused in stand-alone HUD 380 ; hud_status_byte,7 ; --- unused in stand-alone HUD
321 381
382 ; General Flags
322 #DEFINE switch_left flag1,0 ; =1: left button was pressed 383 #DEFINE switch_left flag1,0 ; =1: left button was pressed
323 #DEFINE switch_right flag1,1 ; =1: right button was pressed 384 #DEFINE switch_right flag1,1 ; =1: right button was pressed
324 #DEFINE neg_flag flag1,2 ; e.g. sub16 (sub_c = sub_a - sub_b) 385 #DEFINE neg_flag flag1,2 ; =1: result is negative, e.g. by sub16 (sub_c = sub_a - sub_b)
325 #DEFINE pressure_refresh flag1,3 ; =1: A new pressure/temperature is available 386 #DEFINE pressure_refresh flag1,3 ; =1: s new pressure/temperature is available
326 #DEFINE sleepmode flag1,4 ; =1: in Sleepmode 387 #DEFINE sleepmode flag1,4 ; =1: in sleep mode
327 #DEFINE tft_is_dimming flag1,5 ; =1: the TFT is dimming, ignore light sensor 388 #DEFINE tft_is_dimming flag1,5 ; =1: the TFT is dimming, ignore light sensor
328 #DEFINE display_velocity flag1,6 ; =1: show velocity 389 #DEFINE display_velocity flag1,6 ; =1: show velocity
329 #DEFINE no_sensor_int flag1,7 ; =1: block any further access to pressure sensor 390 #DEFINE no_sensor_int flag1,7 ; =1: block any further access to pressure sensor
330 391
331 #DEFINE rs232_receive_overflow flag2,0 ; =1: a RS232 timeout overflow occoured 392 #DEFINE rs232_receive_overflow flag2,0 ; =1: a RS232 timeout overflow occurred
332 #DEFINE stored_gas_changed flag2,1 ; =1: Stored Gas changed 393 #DEFINE stored_gas_changed flag2,1 ; =1: stored Gas changed
333 #DEFINE high_altitude_mode flag2,2 ; =1: unit was manually turned on with ambient pressure <880mbar 394 #DEFINE high_altitude_mode flag2,2 ; =1: unit was manually turned on with ambient pressure <880mbar
334 #DEFINE FLAG_apnoe_mode flag2,3 ; =1: Apnoe mode selected 395 #DEFINE FLAG_apnoe_mode flag2,3 ; =1: apnoe mode selected
335 #DEFINE restore_deco_data flag2,4 ; =1: restore deco data (After simulation) 396 #DEFINE restore_deco_data flag2,4 ; =1: restore deco data (After simulation)
336 #DEFINE premenu flag2,5 ; =1: Premenu/Divemenu selected 397 #DEFINE premenu flag2,5 ; =1: pre-menu/dive menu selected
337 #DEFINE menubit flag2,6 ; menu 398 #DEFINE menubit flag2,6 ; menu
338 #DEFINE simulatormode_active flag2,7 ; =1: simulator mode active, override pressure sensor readings 399 #DEFINE simulatormode_active flag2,7 ; =1: simulator mode active, override pressure sensor readings
339 400
340 #DEFINE divemode_menu flag3,0 ; =1: divemode menu is shown 401 #DEFINE divemode_menu flag3,0 ; =1: dive mode menu is shown
341 #DEFINE onesecupdate flag3,1 ; =1: after any second 402 #DEFINE onesecupdate flag3,1 ; =1: set any new second
342 #DEFINE twosecupdate flag3,2 ; =1: new two-second update 403 #DEFINE onesectoggle flag3,2 ; used for phasing every-2-seconds tasks
343 #DEFINE toggle_customview flag3,3 ; =1: next customview 404 #DEFINE toggle_customview flag3,3 ; =1: next customview
344 #DEFINE oneminupdate flag3,4 ; =1: after any minute 405 #DEFINE oneminupdate flag3,4 ; =1: set any new minute
345 #DEFINE divemode flag3,5 ; =1: in Divemode 406 #DEFINE divemode flag3,5 ; =1: in dive mode
346 #DEFINE battery_is_36v flag3,6 ; =1: 3,6V Battery is in use 407 #DEFINE battery_is_36v flag3,6 ; =1: a 3.6 Volt battery is in use
347 #DEFINE warning_active flag3,7 ; =1: a warning is active in divemode or surfacemode 408 #DEFINE message_warning flag3,7 ; =1: a warning is active in dive mode or surface mode
348 409
349 #DEFINE better_gas_available flag4,0 ; =1: a better gas is available 410 #DEFINE better_gas_available flag4,0 ; =1: a better gas is available
350 #DEFINE blinking_better_gas flag4,1 ; =1: gas is blinking 411 #DEFINE blinking_better_gas flag4,1 ; =1: gas is blinking
351 #DEFINE menuview flag4,2 ; =1: a menuview is shown in divemode (e.g. "Menu?") 412 #DEFINE menuview flag4,2 ; =1: a menu view is shown in dive mode (e.g. "Menu?")
352 #DEFINE quarter_second_update flag4,3 ; =1: a new 1/4 second has begun 413 #DEFINE quarter_second_update flag4,3 ; =1: a new 1/4 second has begun
353 #DEFINE divemode_gaschange flag4,4 ; =1: the gas will change very soon 414 #DEFINE divemode_gaschange flag4,4 ; =1: the gas will change very soon
354 #DEFINE decostop_active flag4,5 ; =1: decompression stop shown 415 #DEFINE decostop_active flag4,5 ; =1: decompression stop shown
355 #DEFINE depth_greater_100m flag4,6 ; =1: current depth > 100m 416 #DEFINE depth_greater_100m flag4,6 ; =1: current depth > 100 meters
356 #DEFINE realdive flag4,7 ; =1: a real dive during divemode 417 #DEFINE realdive flag4,7 ; =1: a real dive during dive mode
357 418
358 #DEFINE dive_warning_displayed flag5,0 ; =1: the warning sign is shown 419 #DEFINE dive_warning_displayed flag5,0 ; =1: the warning sign is shown
359 #DEFINE reset_average_depth flag5,1 ; =1: reset the average depth 420 #DEFINE reset_average_depth flag5,1 ; =1: reset the average depth
360 #DEFINE store_sample flag5,2 ; =1: store a new sample 421 #DEFINE store_sample flag5,2 ; =1: store a new sample
361 #DEFINE divemode2 flag5,3 ; =1: dive longer than one minute 422 #DEFINE divemode2 flag5,3 ; =1: dive longer than one minute
362 #DEFINE FLAG_active_descent flag5,4 ; used in Apnoe mode 423 #DEFINE FLAG_active_descent flag5,4 ; used in apnoe mode
363 #DEFINE event_occured flag5,5 ; =1: an event occured, store it! 424 #DEFINE event_occured flag5,5 ; =1: an event occurred, store it!
364 #DEFINE divemode_menu_active flag5,6 ; =1: the divemode menu is shown 425 #DEFINE divemode_menu_active flag5,6 ; =1: the dive mode menu is shown
365 #DEFINE temp_changed flag5,7 ; =1: the temperature changed 426 #DEFINE temp_changed flag5,7 ; =1: the temperature changed
366 427
367 #DEFINE gas6_changed flag6,0 ; =1: gas 6 has been selected/changed underwater 428 #DEFINE gas6_changed flag6,0 ; =1: gas 6 has been selected/changed underwater
368 #DEFINE onehourupdate flag6,1 ; =1: a new hour has just begun 429 #DEFINE onehourupdate flag6,1 ; =1: a new hour has just begun
369 #DEFINE settime_setdate flag6,2 ; =1: in the Set Time or Set Date Menu 430 #DEFINE settime_setdate flag6,2 ; =1: in the Set Time or Set Date Menu
370 #DEFINE setpoint_changed flag6,3 ; =1: setpoint has been changed 431 #DEFINE setpoint_changed flag6,3 ; =1: setpoint has been changed
371 #DEFINE second_row_warning flag6,4 ; =1: the second row contains a warning 432 #DEFINE second_row_warning flag6,4 ; =1: the second row contains a warning
372 #DEFINE FLAG_ccr_mode flag6,5 ; =1: CCR mode (fixed ppO2 or sensor) active 433 #DEFINE FLAG_ccr_mode flag6,5 ; =1: CCR mode (fixed ppO2 or sensor) active
373 #DEFINE FLAG_back_to_loop flag6,6 ; =1: a switchback from bailout to loop occured 434 #DEFINE FLAG_back_to_loop flag6,6 ; =1: a switchback from bailout to loop occurred
374 #DEFINE FLAG_set_marker flag6,7 ; =1: set a marker in the logbook 435 #DEFINE FLAG_set_marker flag6,7 ; =1: set a marker in the logbook
375 436
376 ; flag7,0 ; unused 437 #DEFINE better_gas_hint flag7,0 ; =1: mark a gas in yellow when it is a better gas
377 #DEFINE no_more_divesecs flag7,1 ; =1: Do no longer show seconds in divemode 438 #DEFINE no_more_divesecs flag7,1 ; =1: do no longer show seconds in dive mode
378 #DEFINE FLAG_gauge_mode flag7,2 ; =1: In Gauge mode 439 #DEFINE FLAG_gauge_mode flag7,2 ; =1: in Gauge mode
379 #DEFINE ignore_last_edited_gas flag7,3 ; Used in gaslist_cleanup_list 440 #DEFINE ignore_last_edited_gas flag7,3 ; used in gaslist_cleanup_list
380 #DEFINE ccr_diluent_setup flag7,4 ; =1: Setting up Diluents ("Gas6-10") 441 #DEFINE FLAG_diluent_setup flag7,4 ; =1: setting up Diluents ("Gas6-10")
381 #DEFINE space_gas_decriptions flag7,5 ; =1: add a space in front of gas numbers < 9 for alignment 442 IFDEF _rx_functions
382 #DEFINE short_gas_decriptions flag7,6 ; =1: Use short versions of gaslist_strcat_gas_mod and gaslist_strcat_setpoint 443 #DEFINE FLAG_pairing_mode flag7,5 ; =1: in transmitter-to-tank pairing menu
383 #DEFINE max_depth_greater_100m flag7,7 ; =1: Max. Depth > 100m 444 ENDIF
384 445 #DEFINE short_gas_decriptions flag7,6 ; =1: use short versions of gaslist_strcat_gas_cd and gaslist_strcat_setpoint
385 #DEFINE is_bailout flag8,0 ; =1: Bailout 446 #DEFINE max_depth_greater_100m flag7,7 ; =1: max. depth > 100 meters
386 #DEFINE is_bailout_menu flag8,1 ; =1: Bailout 447
387 #DEFINE toggle_gf flag8,2 ; =1: Toggle GF/aGF 448 #DEFINE FLAG_bailout_mode flag8,0 ; =1: in bailout mode
388 #DEFINE use_agf flag8,3 ; =1: Use aGF (instead of GF) 449 #DEFINE is_bailout_menu flag8,1 ; =1: in bailout menu
389 #DEFINE battery_removed_in_usb flag8,4 ; =1: The battery has been removed in USB (probably not used for anything useful) 450 #DEFINE toggle_gf flag8,2 ; =1: toggle GF/aGF
390 #DEFINE adc_running flag8,5 ; =1: The ADC is in use 451 #DEFINE use_agf flag8,3 ; =1: use aGF (instead of GF)
452 #DEFINE battery_removed_in_usb flag8,4 ; =1: the battery has been removed in USB (probably not used for anything useful)
453 #DEFINE adc_running flag8,5 ; =1: the ADC is in use
391 #DEFINE comm_service_enabled flag8,6 ; =1: COMM Service mode unlocked 454 #DEFINE comm_service_enabled flag8,6 ; =1: COMM Service mode unlocked
392 #DEFINE compass_enabled flag8,7 ; =1: The compass and accelerometer chip is active 455 #DEFINE compass_enabled flag8,7 ; =1: the compass and accelerometer chip is active
393 456
394 #DEFINE compass_fast_mode flag9,0 ; =1: The compass is in fast mode 457 #DEFINE compass_fast_mode flag9,0 ; =1: the compass is in fast mode
395 #DEFINE in_color_menu flag9,1 ; =1: In the color scheme menu 458 #DEFINE in_color_menu flag9,1 ; =1: in the color scheme menu
396 #DEFINE bailoutgas_event flag9,2 ; =1: bailout was selected or a gaschange during bailout 459 #DEFINE bailoutgas_event flag9,2 ; =1: bailout was selected or a gas change during bailout
397 #DEFINE win_invert flag9,3 ; =1: Invert font output 460 #DEFINE win_invert flag9,3 ; =1: invert font output
398 #DEFINE show_safety_stop flag9,4 ; =1: Show the safety stop 461 #DEFINE show_safety_stop flag9,4 ; =1: show the safety stop
399 #DEFINE safety_stop_active flag9,5 ; =1: The safety stop is currently displayed 462 #DEFINE safety_stop_active flag9,5 ; =1: the safety stop is currently displayed
400 #DEFINE new_s8_data_available flag9,6 ; =1: New data frame received 463 #DEFINE new_s8_data_available flag9,6 ; =1: new data frame received
401 #DEFINE print_compass_label flag9,7 ; =1: print the graphical comapss label 464 #DEFINE print_compass_label flag9,7 ; =1: print the graphical compass label
402 465
403 #DEFINE s8_digital flag10,0 ; =1: Digital I/O 466 #DEFINE s8_digital flag10,0 ; =1: digital I/O
404 #DEFINE menu_show_sensors2 flag10,1 ; =1: Update mV data in calibration menu 467 #DEFINE menu_update_sensor_mv flag10,1 ; =1: update mV data in calibration menu
405 #DEFINE use_O2_sensor1 flag10,2 ; =1: Use this sensor 468 #DEFINE use_O2_sensor1 flag10,2 ; =1: use this sensor
406 #DEFINE use_O2_sensor2 flag10,3 ; =1: Use this sensor 469 #DEFINE use_O2_sensor2 flag10,3 ; =1: use this sensor
407 #DEFINE use_O2_sensor3 flag10,4 ; =1: Use this sensor 470 #DEFINE use_O2_sensor3 flag10,4 ; =1: use this sensor
408 #DEFINE setpoint_fallback flag10,5 ; =1: Fallback to SP1 due to external O2 sensor failure 471 #DEFINE setpoint_fallback flag10,5 ; =1: fall-back to SP1 due to external O2 sensor failure
409 #DEFINE blinking_setpoint flag10,6 ; =1: SP is blinking 472 IFDEF _screendump
410 #DEFINE flip_screen flag10,7 ; =1: Screen is flipped by 180° 473 #DEFINE enable_screen_dumps flag10,6 ; =1: ignore vin_usb, wait for "l" command (screen dump)
411 474 ELSE
412 #DEFINE sensor1_calibrated_ok flag11,0 ; =1: This sensor has been calibrated ok 475 #DEFINE disable_comm_mode flag10,6 ; =1: ignore vin_usb
413 #DEFINE sensor2_calibrated_ok flag11,1 ; =1: This sensor has been calibrated ok 476 ENDIF
414 #DEFINE sensor3_calibrated_ok flag11,2 ; =1: This sensor has been calibrated ok 477 #DEFINE flip_screen flag10,7 ; =1: screen is flipped by 180°
415 #DEFINE voting_logic_sensor1 flag11,3 ; =1: This sensor is within the voting logic threshold 478
416 #DEFINE voting_logic_sensor2 flag11,4 ; =1: This sensor is within the voting logic threshold 479 ; flag11,* are not cleared on (re-)start
417 #DEFINE voting_logic_sensor3 flag11,5 ; =1: This sensor is within the voting logic threshold 480 #DEFINE sensor1_calibrated_ok flag11,0 ; =1: this sensor has been calibrated ok
418 #DEFINE cc_active flag11,6 ; =1: Constant Current active (cR Hardware) 481 #DEFINE sensor2_calibrated_ok flag11,1 ; =1: this sensor has been calibrated ok
419 #DEFINE cv_active flag11,7 ; =1: Constant Voltage active (cR Hardware) 482 #DEFINE sensor3_calibrated_ok flag11,2 ; =1: this sensor has been calibrated ok
420 483 #DEFINE voting_logic_sensor1 flag11,3 ; =1: this sensor is within the voting logic threshold
421 #DEFINE neg_flag_velocity flag12,0 ; neg_flag backup for velocity logic 484 #DEFINE voting_logic_sensor2 flag11,4 ; =1: this sensor is within the voting logic threshold
422 #DEFINE compass_bearing_eq flag12,1 ; bearing is in direction? do not show << or >> 485 #DEFINE voting_logic_sensor3 flag11,5 ; =1: this sensor is within the voting logic threshold
423 #DEFINE compass_bearing_lft flag12,2 ; bearing is to the left/<< if set, otherwise to the right/>> 486 #DEFINE cc_active flag11,6 ; =1: constant current active (cR hardware)
424 #DEFINE compass_bearing_vis flag12,3 ; bearing is visible? (either ahead or behind/-180°) 487 #DEFINE cv_active flag11,7 ; =1: constant voltage active (cR hardware)
425 #DEFINE compass_bearing_ahd flag12,4 ; bearing is ahead or behind? 488
426 #DEFINE blinking_depth_warning flag12,5 ; set by the color_depth. =1: warning color 489 #DEFINE neg_flag_velocity flag12,0 ; neg_flag backup for velocity logic
427 #DEFINE blinking_depth_prev flag12,6 ; set by the TFT_depth. =1: prev display had warning color 490 #DEFINE compass_bearing_eq flag12,1 ; =1: bearing is in direction, do not show << or >>
428 #DEFINE blinking_depth_toggle flag12,7 ; toggle to blink 491 #DEFINE compass_bearing_lft flag12,2 ; =1: bearing is to the left/<<, =0: to the right/>>
429 492 #DEFINE compass_bearing_vis flag12,3 ; =1: bearing is visible (either ahead or behind/-180°)
430 #DEFINE compass_bearing_set flag13,0 ; bearing set 493 #DEFINE compass_bearing_ahd flag12,4 ; =1: bearing is ahead, =0: behind
431 #DEFINE analog_sw1_pressed flag13,1 ; =1: Analog switch 1 pressed 494 #DEFINE blinking_depth_warning flag12,5 ; =1: warning color, set by the color_depth
432 #DEFINE analog_sw2_pressed flag13,2 ; =1: Analog switch 2 pressed 495 #DEFINE blinking_depth_prev flag12,6 ; =1: prev display had warning color, set by the TFT_depth
433 #DEFINE sp2_switched flag13,3 ; =1: This setpoint has been autoselected already 496 #DEFINE blinking_depth_toggle flag12,7 ; toggle controlling blinking
434 #DEFINE sp3_switched flag13,4 ; =1: This setpoint has been autoselected already 497
435 #DEFINE sp4_switched flag13,5 ; =1: This setpoint has been autoselected already 498 ; flag13,* are not cleared on (re-)start
436 #DEFINE sp5_switched flag13,6 ; =1: This setpoint has been autoselected already 499 #DEFINE compass_bearing_set flag13,0 ; =1: compass bearing is set
500 #DEFINE analog_sw1_pressed flag13,1 ; =1: analog switch 1 pressed
501 #DEFINE analog_sw2_pressed flag13,2 ; =1: analog switch 2 pressed
502 #DEFINE sp2_switched flag13,3 ; =1: this setpoint has been auto-selected already
503 #DEFINE sp3_switched flag13,4 ; =1: this setpoint has been auto-selected already
504 #DEFINE sp4_switched flag13,5 ; =1: this setpoint has been auto-selected already
505 #DEFINE sp5_switched flag13,6 ; =1: this setpoint has been auto-selected already
437 #DEFINE use_old_batt_flag flag13,7 ; =1: load old battery information after power-on reset 506 #DEFINE use_old_batt_flag flag13,7 ; =1: load old battery information after power-on reset
438 507
439 #DEFINE FLAG_pscr_mode flag14,0 ; =1: OSTC is in PSCR mode 508 #DEFINE FLAG_pscr_mode flag14,0 ; =1: OSTC is in pSCR mode
440 #DEFINE deep_sleep flag14,1 ; =1: OSTC is in deep sleep (ignore buttons, etc) 509 #DEFINE deep_sleep flag14,1 ; =1: OSTC is in deep sleep (ignore buttons, etc)
441 #DEFINE sensors_agree flag14,2 ; =1: the ppO2 of all sensors are within the threshold range 510 #DEFINE sensors_agree flag14,2 ; =1: the ppO2 of all sensors are within the threshold range
442 #DEFINE gas_needs_attention flag14,3 ; =1: the gas needs attention has been raised before 511 #DEFINE gas_needs_attention flag14,3 ; =1: the gas needs attention has been raised before
443 #DEFINE gas_needs_warning flag14,4 ; =1: the gas needs warning has been raised before 512 #DEFINE gas_needs_warning flag14,4 ; =1: the gas needs warning has been raised before
444 #DEFINE sensor_warning flag14,5 ; =1: the sensors disagree warning has been raised before 513 #DEFINE sensor_warning flag14,5 ; =1: the sensors disagree warning has been raised before
445 #DEFINE alternative_divelayout flag14,6 ; =1: the alternative divelayout is used (aka Blind Mode) 514 #DEFINE alternative_divelayout flag14,6 ; =1: the alternative dive layout is used (aka "blind mode")
446 #DEFINE i2c_error_flag flag14,7 ; =1: an I2C error occured 515 #DEFINE i2c_error_flag flag14,7 ; =1: an I2C error occurred
447 516
448 #define aa_antialias aa_flags,0 ; used by aa_wordprocessor 517 #DEFINE better_dil_available flag15,0 ; =1: a better diluent is available
449 #define aa_color_quart aa_flags,1 ; used by aa_wordprocessor 518 #DEFINE blinking_better_dil flag15,1 ; =1: diluent is blinking
450 #define aa_color_half aa_flags,2 ; used by aa_wordprocessor 519 #DEFINE FLAG_oc_mode flag15,2 ; =1: OC mode active
451 ; aa_flags,3 ; unused 520 #DEFINE message_attention flag15,3 ; =1: an attention is active in divem ode or surface mode
452 ; aa_flags,4 ; unused 521 #DEFINE message_advice flag15,4 ; =1: an advice is active in divem ode
453 ; aa_flags,5 ; unused 522 #DEFINE blinking_depth_attention flag15,5 ; =1: attention color, set by the color_depth
454 ; aa_flags,6 ; unused 523 #DEFINE aux_flag flag15,6 ; provided for local boolean storage
455 ; aa_flags,7 ; unused 524 #DEFINE FLAG_tr_enabled flag15,7 ; =1: TR (pressure transmitter) functions enabled
456 525
457 526 IFDEF _cave_mode
458 ; Update flags in divemode, =1: Update the screen 527 #DEFINE FLAG_cave_mode flag16,0 ; =1: in cave mode
459 #DEFINE FLAG_TFT_divemode_mask tft_update_flags+0,0 528 #DEFINE FLAG_cave_mode_shutdown flag16,1 ; =1: cave mode has shut down due to bracktrack memory full
460 #DEFINE FLAG_TFT_display_ndl_mask tft_update_flags+0,1 529 #DEFINE FLAG_dive_turned flag16,2 ; =1: dive is turned
461 #DEFINE FLAG_TFT_depth tft_update_flags+0,2 530 #DEFINE toggle_turn_dive flag16,3 ; =1: toggle dive turned status
462 #DEFINE FLAG_TFT_divemins tft_update_flags+0,3 531 #DEFINE gas_needs_mode_last flag16,4 ; =1: last reported gas needs where computed in cave mode
463 #DEFINE FLAG_TFT_show_safety_stop tft_update_flags+0,4 532 ENDIF
464 #DEFINE FLAG_TFT_display_ndl tft_update_flags+0,5 533 IFDEF _rx_functions
465 #DEFINE FLAG_TFT_display_deko_mask tft_update_flags+0,6 534 #DEFINE menu_update_tank_pres flag16,5 ; =1: update tank pressure data in menu mode
466 #DEFINE FLAG_TFT_display_deko tft_update_flags+0,7 535 ENDIF
467 #DEFINE FLAG_TFT_display_tts tft_update_flags+1,0 536 #DEFINE redraw_custview_mask flag16,6 ; =1: request to redraw the custom view mask
468 #DEFINE FLAG_TFT_temp_divemode tft_update_flags+1,1 537 ; flag16,7 ; --- unused
469 #DEFINE FLAG_TFT_divemode_warning tft_update_flags+1,2 538
470 #DEFINE FLAG_TFT_divemode_warning_clear tft_update_flags+1,3 539 IFDEF _rx_functions
471 #DEFINE FLAG_TFT_active_gas_divemode tft_update_flags+1,4 540 #DEFINE transmitter1_lost flag17,0 ; =1: transmitter 1 lost is an old message
472 #DEFINE FLAG_TFT_clear_safety_stop tft_update_flags+1,5 541 #DEFINE transmitter1_battery flag17,1 ; =1: transmitter 1 battery low is an old message
473 #DEFINE FLAG_TFT_max_depth tft_update_flags+1,6 542 #DEFINE transmitter1_pres_warn flag17,2 ; =1: transmitter 1 pressure warning is an old message
474 #DEFINE FLAG_TFT_divemode_mask_alt tft_update_flags+1,7 543 #DEFINE transmitter1_pres_att flag17,3 ; =1: transmitter 1 pressure attention is an old message
475 #DEFINE FLAG_TFT_dive_warning_text_clear tft_update_flags+2,0 544 #DEFINE transmitter2_lost flag17,4 ; =1: transmitter 2 lost is an old message
476 #DEFINE FLAG_TFT_dive_warning_text_clr2 tft_update_flags+2,1 545 #DEFINE transmitter2_battery flag17,5 ; =1: transmitter 2 battery low is an old message
477 #DEFINE FLAG_TFT_max_depth_alt tft_update_flags+2,2 546 #DEFINE transmitter2_pres_warn flag17,6 ; =1: transmitter 2 pressure warning is an old message
478 #DEFINE FLAG_TFT_big_deco_alt tft_update_flags+2,3 547 #DEFINE transmitter2_pres_att flag17,7 ; =1: transmitter 2 pressure attention is an old message
548 ENDIF
549
550 ; Low-Level Display Control
551 #DEFINE aa_antialias aa_flags,0 ; used by aa_wordprocessor
552 #DEFINE aa_color_quart aa_flags,1 ; used by aa_wordprocessor
553 #DEFINE aa_color_half aa_flags,2 ; used by aa_wordprocessor
554 #DEFINE use_custom_colors aa_flags,3 ; =1: override default pixel colors, used by color_image
555 ; aa_flags,4 ; --- unused
556 ; aa_flags,5 ; --- unused
557 ; aa_flags,6 ; --- unused
558 ; aa_flags,7 ; --- unused
559
560
561 ; Display Update Flags in Dive Mode
562 #DEFINE FLAG_TFT_divemode_mask tft_update_flags+0,0 ; =1: update the display
563 #DEFINE FLAG_TFT_display_ndl_mask tft_update_flags+0,1 ; =1: update the display
564 #DEFINE FLAG_TFT_depth tft_update_flags+0,2 ; =1: update the display
565 #DEFINE FLAG_TFT_divemins tft_update_flags+0,3 ; =1: update the display
566 #DEFINE FLAG_TFT_show_safety_stop tft_update_flags+0,4 ; =1: update the display
567 #DEFINE FLAG_TFT_display_ndl tft_update_flags+0,5 ; =1: update the display
568 #DEFINE FLAG_TFT_display_deko_mask tft_update_flags+0,6 ; =1: update the display
569 #DEFINE FLAG_TFT_display_deko tft_update_flags+0,7 ; =1: update the display
570 #DEFINE FLAG_TFT_display_tts tft_update_flags+1,0 ; =1: update the display
571 #DEFINE FLAG_TFT_temp_divemode tft_update_flags+1,1 ; =1: update the display
572 #DEFINE FLAG_TFT_divemode_warning tft_update_flags+1,2 ; =1: update the display
573 #DEFINE FLAG_TFT_divemode_warning_clear tft_update_flags+1,3 ; =1: update the display
574 #DEFINE FLAG_TFT_active_gas_divemode tft_update_flags+1,4 ; =1: update the display
575 #DEFINE FLAG_TFT_clear_safety_stop tft_update_flags+1,5 ; =1: update the display
576 #DEFINE FLAG_TFT_max_depth tft_update_flags+1,6 ; =1: update the display
577 #DEFINE FLAG_TFT_divemode_mask_alt tft_update_flags+1,7 ; =1: update the display
578 #DEFINE FLAG_TFT_dive_warning_text_clear tft_update_flags+2,0 ; =1: update the display
579 #DEFINE FLAG_TFT_dive_warning_text_clr2 tft_update_flags+2,1 ; =1: update the display
580 #DEFINE FLAG_TFT_big_deco_alt tft_update_flags+2,2 ; =1: update the display
581 #DEFINE FLAG_TFT_display_ndl_or_deko tft_update_flags+2,3 ; =1: update the display
479 ; tft_update_flags+2,4 ; unused 582 ; tft_update_flags+2,4 ; unused
480 ; tft_update_flags+2,5 ; unused 583 ; tft_update_flags+2,5 ; unused
481 ; tft_update_flags+2,6 ; unused 584 ; tft_update_flags+2,6 ; unused
482 ; tft_update_flags+2,7 ; unused 585 ; tft_update_flags+2,7 ; unused
483 586
484 587
485 ;---------------------------- Macros ------------------------------------ 588 ;---------------------------- Macros ------------------------------------
486 589
487 TSTOSS macro opt_reg ; TeST Option Skip if not Zero 590 TSTOSS macro opt_reg ; TeST Option Skip if not Zero
488 movff opt_reg,WREG 591 movff opt_reg,WREG ; Attention: destroys WREG!
489 tstfsz WREG,A 592 tstfsz WREG,A ; Attention: the following command must be a
490 bra $+4 593 bra $+4 ; plain machine command, do not let
491 endm 594 endm ; follow a macro!
492 595
493 ;---------------------------- C-code Routines ---------------------------- 596 ;---------------------------- C-Code Routines ----------------------------
494 597
495 extern deco_calc_desaturation_time 598 extern deco_calc_desaturation_time
496 extern deco_calc_hauptroutine 599 extern deco_calc_hauptroutine
600 extern deco_calc_dive_interval
497 extern deco_calc_dive_interval_1min 601 extern deco_calc_dive_interval_1min
498 extern deco_calc_dive_interval_10min 602 extern deco_calc_dive_interval_10min
499 extern deco_calc_dive_interval
500 extern deco_clear_tissue 603 extern deco_clear_tissue
501 extern deco_pull_tissues_from_vault 604 extern deco_pull_tissues_from_vault
502 extern deco_push_tissues_to_vault 605 extern deco_push_tissues_to_vault
503 606
504 607
505 ;---------------------------- Bank0 DATA ------------------------------------ 608 ;---------------------------- Bank0 DATA ------------------------------------
506 isr_backup equ 0x60 609 isr_backup equ 0x60
507 isr_backup udata_ovr isr_backup ; Reserved space for interupt data 610 isr_backup udata_ovr isr_backup ; reserved space for interrupt data
508 611
509 ;---- Backup for general registers 612
613 ;---- Backup for general Registers
510 isr_prod res 2 614 isr_prod res 2
511 615
512 ;---- MS5541 subroutines 616 ;---- MS5541 Subroutines
513 amb_pressure res 2 617 amb_pressure res 2
514 temperature res 2 618 temperature res 2
515 619
516 C1 res 2 ; Decoded calibration data 620 C1 res 2 ; decoded calibration data
517 C2 res 2 621 C2 res 2
518 C3 res 2 622 C3 res 2
519 C4 res 2 ; Here: C4-250 623 C4 res 2 ; here: C4-250
520 C5 res 2 ; Here: Reference Temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760) 624 C5 res 2 ; here: Reference Temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760)
521 C6 res 2 625 C6 res 2
522 D1 res 2 ; raw pressure 626 D1 res 2 ; raw pressure
523 D2 res 2 ; raw temperature 627 D2 res 2 ; raw temperature
524 xdT res 2 628 xdT res 2
525 xdT2 res 2 629 xdT2 res 2
526 OFF res 2 630 OFF res 2
527 SENS res 2 631 SENS res 2
528 dLSB res 1 ; Pressure sensor interface 632 dLSB res 1 ; pressure sensor interface
529 dMSB res 1 633 dMSB res 1
530 clock_count res 1 634 clock_count res 1
531 sensor_state_counter res 1 ; counts to eight for state maschine 635 sensor_state_counter res 1 ; counts to eight for state machine
532 amb_pressure_avg res 2 636 amb_pressure_avg res 2
533 temperature_avg res 2 637 temperature_avg res 2
534 minimum_temperature res 2 ; minimum temperature 638 minimum_temperature res 2 ; minimum temperature
535 last_temperature res 2 639 last_temperature res 2
536 last_pressure res 2 640 last_pressure res 2
537 last_pressure_velocity res 2 ; For velocity 641 last_pressure_velocity res 2 ; for velocity
538 last_surfpressure res 2 642 last_surfpressure res 2
539 last_surfpressure_15min res 2 643 last_surfpressure_15min res 2
540 last_surfpressure_30min res 2 644 last_surfpressure_30min res 2
541 rel_pressure res 2 645 rel_pressure res 2
542 sim_pressure res 2 ; hold simulated pressure in mbar if in Simulator mode 646 sim_pressure res 2 ; hold simulated pressure in mbar if in Simulator mode
543 max_pressure res 2 647 max_pressure res 2
544 avg_rel_pressure res 2 648 avg_rel_pressure res 2
545 avg_rel_pressure_total res 2 649 avg_rel_pressure_total res 2
546 650
547 ;---- Data for ISR math subroutines 651 ;---- Data for ISR Math Subroutines
548 isr_xC res 4 652 isr_xC res 4
549 isr_xA res 2 653 isr_xA res 2
550 isr_xB res 2 654 isr_xB res 2
551 655
552 ;---- Data for ISR routines 656 ;---- Data for ISR Routines
553 isr1_temp res 1 ; ISR temp variable, used in ms5541.asm, isr_rtcc, isr_battery_gauge 657 isr1_temp res 1 ; ISR temp variable, used in ms5541.asm, isr_rtcc, isr_battery_gauge
554 isr2_temp res 1 ; ISR temp variable, used isr_battery_gauge 658 isr2_temp res 1 ; ISR temp variable, used isr_battery_gauge
555 659
556 ;---- Display brightness 660 ;---- Display Brightness
557 max_CCPR1L res 1 ; Max. brightness value for CCPR1L 661 max_CCPR1L res 1 ; max. brightness value for CCPR1L
558 662
559 ; Battery gauge (nAs, nC) 663 ;---- Battery Gauge (nAs, nC)
560 battery_gauge res 6 ; 48Bit -> 78Ah max... 664 battery_gauge res 6 ; 48 bit -> 78 Ah max
561 665
562 ; IR/S8-Link 666 ;---- IR/S8-Link
563 ir_s8_buffer res .18 ; temporally used in get_calibration_data for the raw (packed) calibration data 667 ir_s8_buffer res .18 ; temporally used in get_calibration_data for the raw (packed) calibration data
564 ir_s8_counter res 1 668 ir_s8_counter res 1
565 ir_s8_timeout res 1 ; Timeout for valid data 669 ir_s8_timeout res 1 ; timeout for valid data
566 670
567 ; Compass raw data 671 ;---- Compass raw Data
568 compass_DX res 2 672 compass_DX res 2
569 compass_DY res 2 673 compass_DY res 2
570 compass_DZ res 2 674 compass_DZ res 2
571 675
572 accel_DX res 2 676 accel_DX res 2
573 accel_DY res 2 677 accel_DY res 2
574 accel_DZ res 2 678 accel_DZ res 2
575 679
576 ; Compass FILTERED data 680 ;---- Compass filtered Data
577 compass_DX_f res 2 681 compass_DX_f res 2
578 compass_DY_f res 2 682 compass_DY_f res 2
579 compass_DZ_f res 2 683 compass_DZ_f res 2
580 684
581 accel_DX_f res 2 685 accel_DX_f res 2
582 accel_DY_f res 2 686 accel_DY_f res 2
583 accel_DZ_f res 2 687 accel_DZ_f res 2
584 688
585 ; Compass calibration data 689 ;---- Compass Calibration Data
586 compass_CX_f res 2 690 compass_CX_f res 2
587 compass_CY_f res 2 691 compass_CY_f res 2
588 compass_CZ_f res 2 692 compass_CZ_f res 2
589 693
590 ; Compass more data 694 ;---- Compass more Data
591 compass_heading res 2 ; Corrected heading (in 1°) : -180 .. 180 695 compass_heading res 2 ; corrected heading (in 1°) : -180 .. 180
592 compass_heading_old res 2 ; Old heading (For smoother display) 696 compass_heading_old res 2 ; old heading (For smoother display)
593 compass_heading_shown res 2 ; Displayed heading 697 compass_heading_shown res 2 ; displayed heading
594 ;compass_roll res 2 ; Rotation around the X axis 698 ;compass_roll res 2 ; rotation around the X axis
595 ;compass_pitch res 2 ; Rotation around the Y axis 699 ;compass_pitch res 2 ; rotation around the Y axis
596 700 compass_a res 2 ; tmp data for Q15 arithmetics
597 compass_a res 2 ; Tmp data for Q15 arithmetics
598 compass_b res 2 701 compass_b res 2
599 compass_r res 3 702 compass_r res 3
600 703
704 ;---- Data for Logging
601 CNS_start res 2 ; CNS value at beginning of dive 705 CNS_start res 2 ; CNS value at beginning of dive
602 GF_start res 1 ; GF value at beginning of dive 706 GF_start res 1 ; GF value at beginning of dive
603 707
604 speed_setting res 1 ; =1: Eco, =2: Normal, =3: Fastest 708 ;---- CPU mode
605 709 speed_setting res 1 ; =1: eco, =2: normal, =3: fastest
606 ;---- Data for graphical compass 710
711 ;---- Data for graphical Compass
607 xRD res 2 ; virtual compass ruler offset 712 xRD res 2 ; virtual compass ruler offset
608 xRDr res 2 ; virtual compass ruler offset - right end 713 xRDr res 2 ; virtual compass ruler offset - right end
609 xRD180 res 2 ; virtual compass ruler offset for the -180 marker 714 xRD180 res 2 ; virtual compass ruler offset for the -180 marker
610 xLO res 1 ; lo backup to prevent trashing 715 xLO res 1 ; lo backup to prevent trashing
611 xHI res 1 ; hi backup to prevent trashing 716 xHI res 1 ; hi backup to prevent trashing
638 flag10 res 1 743 flag10 res 1
639 flag11 res 1 744 flag11 res 1
640 flag12 res 1 745 flag12 res 1
641 flag13 res 1 746 flag13 res 1
642 flag14 res 1 747 flag14 res 1
643 hardware_flag res 1 ; hardware descriptor flag 748 flag15 res 1
749 flag16 res 1
750 flag17 res 1
751 hardware_flag1 res 1 ; hardware descriptor flags 1
752 hardware_flag2 res 1 ; hardware descriptor flags 2
644 tft_update_flags res 3 753 tft_update_flags res 3
645 754
646 ;---- Interface to Data Conversion & 755 ;---- Interface to Data Conversion &
647 ;---- Output Functions, as well as 756 ;---- Output Functions, as well as
648 ;---- General-Purpose Temp Storage 757 ;---- General-Purpose Temp Storage
649 lo res 1 758 lo res 1 ; nickname for "low" | Attention: do not change the
650 hi res 1 759 hi res 1 ; nickname for "high" | relative positioning of these
651 up res 1 760 up res 1 ; nickname for "upper" | variables, lo will also be used
761 ex res 1 ; nickname for "extra" | as base address for a 8, 16 and
762 ul res 1 ; nickname for "ultra" | 32 bit buffer
652 ignore_digits res 1 763 ignore_digits res 1
653 764
654 ;---- Interface to Graphic Functions 765 ;---- Interface to Graphic Functions
655 win_leftx2 res 1 766 win_leftx2 res 1
656 win_top res 1 767 win_top res 1
661 win_color2 res 1 772 win_color2 res 1
662 win_font res 1 773 win_font res 1
663 774
664 ;---- Interface to Math Functions 775 ;---- Interface to Math Functions
665 divA res 2 776 divA res 2
666 divB res 1
667 xC res 4 777 xC res 4
668 xA res 2 778 xA res 2
669 xB res 2 779 xB res 2
670 sub_c res 2 780 sub_c res 2
671 sub_a res 2 781 sub_a res 2
672 sub_b res 2 782 sub_b res 2
783 math_loop res 1 ; internal variable used for loops
673 784
674 ;---- Misc. 785 ;---- Misc.
675 timeout_counter1 res 2 ; timeout for dive operations 786 timeout_counter1 res 2 ; timeout for dive operations
676 timeout_counter2 res 1 ; timeout for menu operations 787 timeout_counter2 res 1 ; timeout for menu operations
677 batt_voltage res 2 ; battery voltage in mV 788 batt_voltage res 2 ; battery voltage in mV
678 batt_percent res 1 ; battery in percent (1-100) 789 batt_percent res 1 ; battery in percent (1-100)
679 warning_counter res 1 ; counts amount of warning in divemode 790 message_counter res 1 ; counts amount of messages
680 warning_page res 1 ; current # of warning page 791 message_page res 1 ; current # of message page
792 pairing_slot res 1 ; slot number, used in transmitter pairing
793
681 794
682 ;---- Dive Mode / General 795 ;---- Dive Mode / General
683 divemins res 2 796 divemins res 2
684 divesecs res 1 797 divesecs res 1
685 total_divetime_seconds res 2 798 total_divetime_seconds res 2
686 average_divesecs res 2 ; for the resettable stopwatch 799 average_divesecs res 2 ; time accumulator for the resettable stopwatch / average depth
800 average_divesecs_total res 2 ; time accumulator for the total average depth
801 curr_depth res 1 ; current depth in meters
802 amb_press_10 res 2 ; ambient pressure divided by 10
687 safety_stop_countdown res 1 ; counts seconds of safety stop 803 safety_stop_countdown res 1 ; counts seconds of safety stop
688 gaslist_gas res 1 ; used for transfer between gaslist.asm and menu_tree.asm 804 gaslist_gas res 1 ; used for transfer between gaslist.asm and menu_tree.asm
689 active_gas res 1 ; the currently breathed gas (1-5) 805 best_gas_number res 1 ; number of the "best gas": 0= none found, 1-5= gases 1-5, 255= not computed
690 ;active_gas_type res 1 ; 0=Disabled, 1=First, 2=Travel, 3=Deco for OC gases and 0=Disabled, 1=First, 2=Normal for diluents 806 best_dil_number res 1 ; number of the "best dil": 0= none found, 1-5= dils 1-5, 255= not computed
807 active_gas res 1 ; the currently used OC/bailout gas (1-5)
808 active_dil res 1 ; the currently used diluent (1-5)
691 809
692 ;---- Dive Mode / Apnoe 810 ;---- Dive Mode / Apnoe
693 apnoe_surface_mins res 1 811 apnoe_surface_mins res 1
694 apnoe_surface_secs res 1 812 apnoe_surface_secs res 1
695 apnoe_mins res 1 813 apnoe_mins res 1
713 831
714 ;---- O2 Sensor Data 832 ;---- O2 Sensor Data
715 o2_mv_sensor1 res 2 ; in 0.1mV steps 833 o2_mv_sensor1 res 2 ; in 0.1mV steps
716 o2_mv_sensor2 res 2 ; in 0.1mV steps 834 o2_mv_sensor2 res 2 ; in 0.1mV steps
717 o2_mv_sensor3 res 2 ; in 0.1mV steps 835 o2_mv_sensor3 res 2 ; in 0.1mV steps
718 o2_ppo2_sensor1 res 1 ; Sensor1 ppO2 (in 0.01bar steps) 836 o2_ppo2_sensor1 res 1 ; sensor 1 ppO2 (in 0.01 bar steps)
719 o2_ppo2_sensor2 res 1 ; Sensor2 ppO2 (in 0.01bar steps) 837 o2_ppo2_sensor2 res 1 ; sensor 2 ppO2 (in 0.01 bar steps)
720 o2_ppo2_sensor3 res 1 ; Sensor3 ppO2 (in 0.01bar steps) 838 o2_ppo2_sensor3 res 1 ; sensor 3 ppO2 (in 0.01 bar steps)
721 hud_status_byte res 1 839 hud_status_byte res 1
722 840
723 841
724 ;========================= privte Variables =================================== 842 ;========================= private Variables ===================================
725 ; do not access from outside of the respective source files! 843 ; do not access from outside of the respective source files!
726 844
727 ;---- aa_wordprocessor.asm 845 ;---- aa_wordprocessor.asm
728 aa_flags res 1 ; various flags for aa_wordprocessor 846 aa_flags res 1 ; various flags for aa_wordprocessor
729 aa_bitlen res 1 ; count of pixels when decoding bitmaps 847 aa_bitlen res 1 ; count of pixels when decoding bitmaps
758 ;---- i2c.asm 876 ;---- i2c.asm
759 i2c_temp1 res 1 ; temporary data 877 i2c_temp1 res 1 ; temporary data
760 i2c_temp2 res 1 ; temporary data 878 i2c_temp2 res 1 ; temporary data
761 879
762 ;---- menu_processor.asm 880 ;---- menu_processor.asm
763 menupos1 res 1 ; logbook and divemode menu 881 menupos1 res 1 ; logbook and dive mode menu
764 menupos2 res 1 ; used for dive mode simulator and pre-menu 882 menupos2 res 1 ; used for dive mode simulator and pre-menu
765 menupos3 res 1 ; used for Customviews 883 menupos3 res 1 ; used for custom views
766 menupos4 res 1 ; used for divemode menu 884 menupos4 res 1 ; used for dive mode menu
767 menu_flags res 1 ; flags for menu entries 885 menu_flags res 1 ; flags for menu entries
768 menu_item res 1 ; index of the current item 886 menu_item res 1 ; index of the current item
769 start_item res 1 ; index of the first item (scrolling) 887 start_item res 1 ; index of the first item (scrolling)
770 item_max res 1 ; number of items in menu 888 item_max res 1 ; number of items in menu
771 selected_item res 1 ; index of the current item 889 selected_item res 1 ; index of the current item
790 ;---- tft.asm 908 ;---- tft.asm
791 save_top res 1 909 save_top res 1
792 save_height res 1 910 save_height res 1
793 save_left res 1 911 save_left res 1
794 save_width res 1 912 save_width res 1
795 ds_line res 1 ; current line (0..239)
796 ds_column res 1 ; current columnx2 (0..159)
797 ds_pixel res 2 ; current pixel color
798 ds_count res 1 ; repetition count
799 tft_temp1 res 1 913 tft_temp1 res 1
800 tft_temp2 res 1 914 tft_temp2 res 1
801 tft_temp3 res 1 915 tft_temp3 res 1
802 tft_temp4 res 1 916 tft_temp4 res 1
803 917
918 IFDEF _screendump
919 ;---- Screendump Function
920 ds_line res 1 ; current line (0..239) (dump screen function)
921 ds_column res 1 ; current columnx2 (0..159) (dump screen function)
922 ds_pixel res 2 ; current pixel color (dump screen function)
923 ds_count res 1 ; repetition count (dump screen function)
924 ENDIF
925
804 ;---- wait.asm 926 ;---- wait.asm
805 wait_counter res 1 927 wait_counter res 1
806 928
807 ; ==> 187 bytes used - 21 bytes free 929 ; ==> 202 bytes used - 6 bytes free
808 930
809 931
810 ;============================ LOCAL DATA ====================================== 932 ;============================ LOCAL DATA ======================================
811 ; Space for various overlayed local data from top-level applications, 933 ; Space for various overlayed local data from top-level applications,
812 ; i.e. applications that never run in parallel to each other 934 ; i.e. applications that never run in parallel to each other
816 ; Mode local1 local2 local3 938 ; Mode local1 local2 local3
817 ; ----------------------------------------------------------------------------- 939 ; -----------------------------------------------------------------------------
818 ; sleepmode sleepmode.asm (unused) (unused) 940 ; sleepmode sleepmode.asm (unused) (unused)
819 ; surfmode surfmode.asm* (unused) (unused) 941 ; surfmode surfmode.asm* (unused) (unused)
820 ; simulator simulator.asm (unused) (unused) 942 ; simulator simulator.asm (unused) (unused)
821 ; divemode divemode.asm ghostwriter.asm (unused) 943 ; divemode divemode.asm divemode.asm ghostwriter.asm
822 ; logbook logboock.asm logbook.asm logbook.asm 944 ; logbook logboock.asm logbook.asm logbook.asm
823 ; 945 ;
824 ; * assigned to this slot, but currently no local memory used 946 ; * assigned to this slot, but currently no local memory used
825 947
826 local1 equ 0x1D0 ; Alias for CBLOCK directive 948 local1 equ 0x1D0 ; Alias for CBLOCK directive
838 960
839 ;---------------------------- Common2 DATA ------------------------------------ 961 ;---------------------------- Common2 DATA ------------------------------------
840 common2 equ 0xA00 ; Alias for "banksel common2" 962 common2 equ 0xA00 ; Alias for "banksel common2"
841 common2 udata_ovr common2 ; Bank 10 general variables 963 common2 udata_ovr common2 ; Bank 10 general variables
842 964
843 s8_rawdata_sensor1 res 3 ; 24bit A/D raw data from S8 HUD sensor 1 965 s8_rawdata_sensor1 res 3 ; 24 bit A/D raw data from S8 HUD sensor 1
844 s8_rawdata_sensor2 res 3 ; 24bit A/D raw data from S8 HUD sensor 2 966 s8_rawdata_sensor2 res 3 ; 24 bit A/D raw data from S8 HUD sensor 2
845 s8_rawdata_sensor3 res 3 ; 24bit A/D raw data from S8 HUD sensor 3 967 s8_rawdata_sensor3 res 3 ; 24 bit A/D raw data from S8 HUD sensor 3
846 hud_battery_mv res 2 ; hud/ppo2 monitor battery voltage in mV 968 hud_battery_mv res 2 ; hud/ppo2 monitor battery voltage in mV
847 969
848 start_day res 1 ; At start of dive (For logbook) 970 start_year res 1 ; at start of dive (for logbook) | ATTENTION: do not change the position of these
849 start_month res 1 ; At start of dive (For logbook) 971 start_month res 1 ; at start of dive (for logbook) | variables relative to each other!
850 start_year res 1 ; At start of dive (For logbook) 972 start_day res 1 ; at start of dive (for logbook) |
851 start_hours res 1 ; At start of dive (For logbook) 973 start_hours res 1 ; at start of dive (for logbook) |
852 start_mins res 1 ; At start of dive (For logbook) 974 start_mins res 1 ; at start of dive (for logbook) |
853 975
854 opt_gas_type_backup res 5 ; 0=Disabled, 1=First, 2=Travel, 3=Deco * need to be in same bank 976 opt_gas_type_backup res 5 ; 0=Disabled, 1=First, 2=Travel, 3=Deco | ATTENTION: do not change the position of these
855 opt_dil_type_backup res 5 ; 0=Disabled, 1=First, 2=Normal + need to be in same bank 977 opt_dil_type_backup res 5 ; 0=Disabled, 1=First, 2=Normal | arrays relative to each other!
856 opt_OC_bail_gas_change_backup res 5 ; Gas change depths OC/Bailout *
857 opt_dil_change_backup res 5 ; Gas change depths Diluents +
858 978
859 internal_battery_capacity res 2 ; For internal battery gauging 979 internal_battery_capacity res 2 ; For internal battery gauging
860 battery_capacity res 2 ; For battery gauge IC 980 battery_capacity res 2 ; For battery gauge IC
861 battery_offset res 2 ; For battery gauge IC 981 battery_offset res 2 ; For battery gauge IC
862 battery_type res 1 ; =0:1.5V, =1:3,6V Saft, =2:LiIon 3,7V/0.8Ah, =3:LiIon 3,7V/3.1Ah, =4: LiIon 3,7V/2.3Ah 982 battery_type res 1 ; =0:1.5V, =1:3.6V Saft, =2:LiIon 3.7V/0.8Ah, =3:LiIon 3.7V/3.1Ah, =4: LiIon 3.7V/2.3Ah
863 battery_acumulated_charge res 2 ; Raw values in battery gauge IC 983 battery_acumulated_charge res 2 ; Raw values in battery gauge IC
864 gauge_status_byte res 1 ; Gauge IC status byte 984 gauge_status_byte res 1 ; Gauge IC status byte
865 985
866 analog_sw1_raw res 2 ; idle values (average) 986 analog_sw1_raw res 2 ; idle values (average)
867 analog_sw2_raw res 2 ; idle values (average) 987 analog_sw2_raw res 2 ; idle values (average)
868 analog_counter res 1 ; for averaging 988 analog_counter res 1 ; for averaging
869 analog_sw1 res 1 ; analog value for switch 1 989 analog_sw1 res 1 ; analog value for switch 1
870 analog_sw2 res 1 ; analog value for switch 2 990 analog_sw2 res 1 ; analog value for switch 2
871 button_polarity res 1 ; 0xFF (Both normal), 0x00 (Both inverted), 0x01 (Left inverted only), 0x02 (Right inverted only) 991 button_polarity res 1 ; 0xFF (both normal), 0x00 (both inverted), 0x01 (left inverted only), 0x02 (right inverted only)
872 992
873 uptime res 4 ; Uptime [s] 993 uptime res 4 ; Uptime [s]
874 lastdive_time res 4 ; Time since last dive [s] 994 lastdive_time res 4 ; Time since last dive [s]
875 lastdive_duration res 3 ; mins:2 and secs 995 lastdive_duration res 3 ; mins:2 and secs
876 lastdive_maxdepth res 2 ; in mbar 996 lastdive_maxdepth res 2 ; in mbar
877 997
878 rx_buffer res .48 ; Buffer for RX data (Slots 0-7)
879 rx_firmware res 2 ; The RX firmware version xx.yy
880
881 customview_surfmode res 1 ; storage to remember last selected custom view in surface mode 998 customview_surfmode res 1 ; storage to remember last selected custom view in surface mode
882 customview_divemode res 1 ; storage to remember last selected custom view in dive mode 999 customview_divemode res 1 ; storage to remember last selected custom view in dive mode
883 1000
884 ambient_light res 2 ; ambient_light level 1001 ambient_light res 2 ; ambient_light level
885 better_gas_number res 1 ; number (1-5) of the "better gas" in divemode, =0: no better gas available 1002 old_velocity res 4 ; stores the last 4 speeds (8 seconds) in m/min
886 old_velocity res 4 ; Stores the last 4 speeds (8 seconds) in m/min
887 1003
888 menustack res 5 ; menu stack from menu_processor.asm 1004 menustack res 5 ; menu stack from menu_processor.asm
889 1005
890 gas6_O2_ratio res 1 ; gas6 O2 ratio 1006 gas6_O2_ratio res 1 ; gas6 O2 ratio
891 gas6_He_ratio res 1 ; gas6 He ratio 1007 gas6_He_ratio res 1 ; gas6 He ratio
892 gas6_temp res 1 ; temp used in divemenu_tree.asm 1008 gas6_temp res 1 ; temp used in divemenu_tree.asm
893 1009
894 ; ==> 134 bytes used - 122 bytes free 1010 IFDEF _rx_functions
895 1011 ; Data exchange
896 1012 rx_buffer res .48 ; Buffer for RX data (slots 0-7)
897 ;---------------------------- Bank 2 general purpose buffer ------------------- 1013 rx_firmware res 2 ; RX firmware version xx.yy
1014
1015 ; Variables for SAC Calculation on Pressure Readings 1 & 2
1016 pres_accu_1st res 4 ; accumulator for pressure drop in 1/160 bar | ATTENTION: do not
1017 pres_accu_2nd res 4 ; accumulator for pressure drop in 1/160 bar | change the
1018 time_accu_1st res 1 ; accumulator for reading ages in seconds | position
1019 gas__last_1st res 1 ; last gas assignment | of these
1020 time_accu_2nd res 1 ; accumulator for reading ages in seconds | variables
1021 gas__last_2nd res 1 ; last gas assignment | relative
1022 pres_last_1st res 2 ; last pressure reading pressure in 1/160 bar | to each
1023 pres_last_2nd res 2 ; last pressure reading pressure in 1/160 bar | other!
1024 time_last_1st res 2 ; last pressure reading time in seconds |
1025 time_last_2nd res 2 ; last pressure reading time in seconds |
1026 ENDIF
1027
1028 ; ==> 138 bytes used - 118 bytes free
1029
1030
1031 ;----------------------- Bank 2 General Purpose Buffer -------------------------
898 ; Reserved for general purpose buffer (strings, images, etc). 1032 ; Reserved for general purpose buffer (strings, images, etc).
899 ; NOTE: Needs to be aligned with a bank (LOW(buffer)==0). 1033 ; NOTE: Needs to be aligned with a bank (LOW(buffer)==0).
900 1034
901 buffer udata_ovr 0x200 1035 buffer udata_ovr 0x200
902 1036
903 buffer res .256 1037 buffer res .256 ; used for string assembly / display output
904 1038
905 1039
906 ;---------------------------- Bank 14 for options table ----------------------- 1040 ;---------------------- Bank 14 Options Table ---------------------------------
907 opt_table equ 0xE00 1041 opt_table equ 0xE00
908 opt_table udata_ovr opt_table 1042 opt_table udata_ovr opt_table
909 1043
910 ;---- Dive Options 1044 ;---- Dive Options
911 opt_gas_O2_ratio res 5 ; Needed because deco gaslist use N2 1045 opt_gas_O2_ratio res 5 ; O2 ratios of OC/bailout gases | ATTENTION:
912 opt_dil_O2_ratio res 5 ; Must be in line with opt_gas_O2_ratio 1046 opt_dil_O2_ratio res 5 ; O2 ratios of diluents | keep relative
913 opt_gas_He_ratio res 5 ; He ratio Gas1-5 1047 opt_gas_He_ratio res 5 ; He ratios of OC/bailout gases | positioning of
914 opt_dil_He_ratio res 5 ; Must be in line with opt_gas_He_ratio 1048 opt_dil_He_ratio res 5 ; He ratios of diluents | all arrays in
915 opt_gas_type res 5 ; 0=Disabled, 1=First, 2=Travel, 3=Deco 1049 opt_gas_type res 5 ; OC/bailout gas type: O=Disabled, 1=First, 2=Travel, 3=Deco | this block!
916 opt_dil_type res 5 ; 0=Disabled, 1=First, 2=Normal ; Must be in line with opt_gas_type 1050 opt_dil_type res 5 ; dil type: 0=Disabled, 1=First, 2=Normal |
917 opt_dive_mode res 1 ; 0=OC, 1=CC, 2=Gauge, 3=Apnea, 4=PSCR 1051 opt_gas_change res 5 ; change depths for OC/Bailout gases |
918 opt_ccr_mode res 1 ; =0: Fixed SP, =1: Sensor 1052 opt_dil_change res 5 ; change depths for diluents |
919 opt_OC_bail_gas_change res 5 ; Gas change depths OC/Bailout 1053
1054 opt_dive_mode res 1 ; main dive/deco mode: =0: OC, =1: CC, =2: Gauge, =3: Apnea, =4: pSCR
1055 opt_ccr_mode res 1 ; CCR/pSCR sub mode: =0: fixed/calculated SP, =1: sensor, =2: auto SP
920 1056
921 ;---- Managing Settings 1057 ;---- Managing Settings
922 opt_brightness res 1 ; =0: Eco, =1:Medium, =2:Full 1058 opt_brightness res 1 ; =0: Eco, =1:Medium, =2:Full
923 opt_salinity res 1 ; 0-5% 1059 opt_salinity res 1 ; 0-5%
924 #DEFINE opt_name_length .60 ; Custom text string 5 rows with 12 chars 1060 #DEFINE opt_name_length .60 ; custom text string 5 rows with 12 chars
925 opt_name res opt_name_length 1061 opt_name res opt_name_length
926 opt_language res 1 ; Current language. 0=EN, 1=DE, 2=FR, 3=SP 1062 opt_language res 1 ; current language: 0=EN, 1=DE, 2=FR, 3=SP
927 opt_units res 1 ; 0:m/°C, 1:ft/°F 1063 opt_units res 1 ; 0:m/°C, 1:ft/°F
928 opt_dateformat res 1 ; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD 1064 opt_dateformat res 1 ; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD
929 opt_last_stop res 1 ; =3:3m, =4:4m, =5:5m, =6:6m 1065 opt_last_stop res 1 ; =3:3m, =4:4m, =5:5m, =6:6m
930 opt_aGF_high res 1 ; Alternative GF HIGH 1066 opt_aGF_high res 1 ; alternative GF HIGH
931 opt_aGF_low res 1 ; Alternative GF LOW 1067 opt_aGF_low res 1 ; alternative GF LOW
932 opt_GF_high res 1 ; GF HIGH 1068 opt_GF_high res 1 ; GF HIGH
933 opt_GF_low res 1 ; GF LOW 1069 opt_GF_low res 1 ; GF LOW
934 opt_enable_aGF res 1 ; =1: aGF can be selected underwater 1070 opt_enable_aGF res 1 ; =1: aGF can be selected underwater
935 opt_compass_gain res 1 ; 0-7 (230LSB/Gauss to 1370LSB/Gaus) 1071 opt_compass_gain res 1 ; 0-7 (230LSB/Gauss to 1370LSB/Gaus)
936 opt_sampling_rate res 1 ; =1: 10s, =0: 2s 1072 opt_sampling_rate res 1 ; =1: 10s, =0: 2s
937 opt_dive_color_scheme res 1 ; 0-3 1073 opt_dive_color_scheme res 1 ; 0-3
938 opt_pressure_adjust res 1 ; SIGNED char (two's complement), -20/+20mbar max. 1074 opt_pressure_adjust res 1 ; SIGNED char (two's complement), -20/+20mbar max.
939 opt_enable_safetystop res 1 ; =1: A safety stop is shown 1075 opt_enable_safetystop res 1 ; =1: a safety stop is shown
940 opt_calibration_O2_ratio res 1 ; %O2 of calibration gas 1076 opt_calibration_O2_ratio res 1 ; %O2 of calibration gas
941 opt_x_s1 res 2 ; calibration factor (Not stored in EEPROM) 1077 opt_x_s1 res 2 ; calibration factor (Not stored in EEPROM)
942 opt_x_s2 res 2 ; calibration factor (Not stored in EEPROM) 1078 opt_x_s2 res 2 ; calibration factor (Not stored in EEPROM)
943 opt_x_s3 res 2 ; calibration factor (Not stored in EEPROM) 1079 opt_x_s3 res 2 ; calibration factor (Not stored in EEPROM)
944 opt_sensor_fallback res 1 ; NOT USED ANY MORE, KEPT FOR COMPATIBILITY WITH EEPROM IMAGE 1080 opt_sensor_fallback res 1 ; NOT USED ANY MORE, KEPT FOR COMPATIBILITY WITH EEPROM IMAGE
945 opt_flip_screen res 1 ; =1: Flip the screen 1081 opt_flip_screen res 1 ; =1: flip the screen
946 opt_cR_button_left res 1 ; Left button sensitivity (cR hardware) 1082 opt_cR_button_left res 1 ; left button sensitivity (cR hardware)
947 opt_cR_button_right res 1 ; Right button sensitivity (cR hardware) 1083 opt_cR_button_right res 1 ; right button sensitivity (cR hardware)
948 opt_modwarning res 1 ; =1:do a red blinking warning, =0:default behaviour 1084 opt_modwarning res 1 ; =1:do a red blinking warning, =0:default behavior
949 opt_vsitextv2 res 1 ; =1:use the depth dependent ascend rate limits 1085 opt_vsitextv2 res 1 ; =1:use the depth dependent ascend rate limits
950 opt_vsigraph res 1 ; =1:draw the graphical VSI bar 1086 opt_vsigraph res 1 ; =1:draw the graphical VSI bar
951 opt_showppo2 res 1 ; =1:always show the ppO2 value in the warning position 1087 opt_showppo2 res 1 ; =1:always show the ppO2 value in the warning position
952 opt_temperature_adjust res 1 ; SIGNED char (two's complement), -2.0/+2.0 °C max. 1088 opt_temperature_adjust res 1 ; SIGNED char (two's complement), -2.0/+2.0 °C max.
953 opt_safety_stop_length res 1 ; [s] 1089 opt_safety_stop_length res 1 ; [s]
954 opt_safety_stop_start res 1 ; [cbar] 1090 opt_safety_stop_start res 1 ; [cbar]
955 opt_safety_stop_end res 1 ; [cbar] 1091 opt_safety_stop_end res 1 ; [cbar]
956 opt_safety_stop_reset res 1 ; [cbar] 1092 opt_safety_stop_reset res 1 ; [cbar]
957 opt_diveTimeout res 1 ; Timeout for Divemode [min] 1093 opt_diveTimeout res 1 ; timeout for dive mode [min]
958 opt_sim_setpoint_number res 1 ; setpoint to use for deco calculation 1094 opt_sim_setpoint_number res 1 ; setpoint to use for deco calculation
959 opt_calc_asc_gasvolume res 1 ; calculate OC gas volume needs for ascent 1095 opt_calc_asc_gasvolume res 1 ; calculate OC gas volume needs for ascent
960 opt_sim_use_aGF res 1 ; =0: use GF, =1: use aGF for deco calculation 1096 opt_sim_use_aGF res 1 ; =0: use GF, =1: use aGF for deco calculation
961 opt_enable_IBCD res 1 ; enable IBCD warning 1097 opt_enable_IBCD res 1 ; enable IBCD warning
962 opt_sat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco 1098 opt_sat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco
963 opt_desat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco 1099 opt_desat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco
964 opt_sat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco 1100 opt_sat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco
965 opt_desat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco 1101 opt_desat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco
1102 opt_ZfactorUse res 1 ; =1: figure in compression factor Z when converting gas volume <-> gas pressure
1103 opt_ZfactorTemp res 1 ; temperature setpoint for compression factor Z
1104 opt_2ndDepthDisp res 1 ; =1: show average depth instead of max depth
1105
1106 ; RX functions - no conditional compilation because used in options_table
1107 opt_transmitter_id_1 res 2 ; 16 bit transmitter ID for Gas 1
1108 opt_transmitter_id_2 res 2 ; 16 bit transmitter ID for Gas 2
1109 opt_transmitter_id_3 res 2 ; 16 bit transmitter ID for Gas 3
1110 opt_transmitter_id_4 res 2 ; 16 bit transmitter ID for Gas 4
1111 opt_transmitter_id_5 res 2 ; 16 bit transmitter ID for Gas 5
1112 opt_transmitter_id_6 res 2 ; 16 bit transmitter ID for Dil 1
1113 opt_transmitter_id_7 res 2 ; 16 bit transmitter ID for Dil 2
1114 opt_transmitter_id_8 res 2 ; 16 bit transmitter ID for Dil 3
1115 opt_transmitter_id_9 res 2 ; 16 bit transmitter ID for Dil 4
1116 opt_transmitter_id_10 res 2 ; 16 bit transmitter ID for Dil 5
1117 opt_TR_mode res 1 ; TR functions - mode
1118 opt_TR_1st_pres res 1 ; TR functions - 1st pressure assignment
1119 opt_TR_2nd_pres res 1 ; TR functions - 2nd pressure assignment
1120 opt_TR_Bail_pres res 1 ; TR functions - bailout pressure assignment
1121
1122 ; ==> 173 bytes used - 85 bytes free
966 1123
967 ;----------------------------------------------------------------------------- 1124 ;-----------------------------------------------------------------------------