hwos_code: src/hwos.inc comparison

comparison src/hwos.inc @ 623:c40025d8e750

3.03 beta released

author	heinrichsweikamp
date	Mon, 03 Jun 2019 14:01:48 +0200
parents	1ad0531e9078
children	7bdcc591196c

comparison

equal deleted inserted replaced

-:02d1386429a6
+:c40025d8e750
 ;=============================================================================
 ;
-;   File hwos.inc									REFACTORED VERSION V2.99f
+;   File hwos.inc                             combined next generation V3.03.4
 ;
-;   OSTC Platform definitions
+;   OSTC Platform Definitions
 ;
 ;   Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved.
 ;=============================================================================
 ; HISTORY
 ;   2011-05-24 : [jDG] Cleanups from initial Matthias code
 ;=============================================================================
-; Low Level Settings
-	LIST	P=18F87K22		; compiler  settings, if changed, change also: Configure -> SelectDevice in MPLAB
+; Hardware Configuration
-#include <p18f87k22.inc>	; processor definitions
+	LIST P=18F87K22							; compiler  settings, if changed change also: Configure -> SelectDevice in MPLAB
-#include <ports.inc>		; Portmap   definitions
+#include "p18f87k22.inc"					; processor definitions
+#include "ports.inc"						; port map  definitions
-; Debug Mode
-;#DEFINE __DEBUG			; if defined, compile firmware in debug mode
+; Software Configuration
+#include "configuration.inc"				; OSTC hwOS configuration
-; Conditional Compiles (note: not all options will fit at the same time)
-#DEFINE _screendump			; if defined, compile screen dump  into firmware (default:     included  )
-#DEFINE _rx_functions		; if defined, compile RX (OSTC TR) into firmware (default:     included *)
+; Language Codes
-;#DEFINE _ostc_logo			; if defined, compile OSTC logo    into firmware (default: not included  )
-;#DEFINE _cave_mode			; if defined, compile cave mode    into firmware (default: not included *)   ## OPTION IS UNDER CONSTRUCTION ##
-;
-;                             * option needs to be included / excluded in p2_deco.c, too!
-; Language Selection
 #DEFINE none					0			; no language selected
-#DEFINE en						1			; English
+#DEFINE en						1			; select English
-#DEFINE de						2			; German
+#DEFINE de						2			; select German
-#DEFINE fr						3			; French
+#DEFINE fr						3			; select French
-#DEFINE it						4			; Italian
+#DEFINE it						4			; select Italian
-#DEFINE _language_1				de			; first or single language - must be set to en, de, fr, or it, defaults to en
-#DEFINE _language_2				none		; second language or none
-; Firmware Version
-#DEFINE softwareversion_x		.3			; Software Version, major               (1 -   9)
-#DEFINE softwareversion_y		.01			; Software Version, minor               (1 -  99)
-#DEFINE softwareversion_beta	.0			; 0= Release, 1= Beta-1, 2= Beta-2, ... (0 - 255)
-; Firmware Expiration Date, will cause version to be displayed in "Update Firmware" style after the following date:
-#DEFINE firmware_expire_year	.20
-#DEFINE firmware_expire_month	.2
-#DEFINE firmware_expire_day		.1
 ; Magic Cookie Definition
-#DEFINE comm_service_key		0xABCDEF
+#DEFINE comm_service_key		0xABCDEF	; simsalabim to establish data connection
 ; Logo Address Vectors
 #DEFINE hw_logo_block			0x01E000	; color image data for heinrichsweikamp logo
 #DEFINE usb_ble_logo_block		0x01EEDE	; color image data for USB or BLE logo
 ;-----------------------------EEPROM DATA ------------------------------------
 ; Automatic reset of all options when this is changed:
 #DEFINE eeprom_opt_serial		0x0008		; Version 0.8
 ;-----------------------------------------------------------------------------
 #DEFINE CCP1CON_VALUE					b'00001100'	; PWM1 for LED dimming
-#DEFINE T2CON_ECO						b'01111110'	;
+#DEFINE T2CON_ECO						b'01111110'
-#DEFINE T2CON_NORMAL					b'01111110'	;
+#DEFINE T2CON_NORMAL					b'01111110'
-#DEFINE T2CON_FASTEST					b'01111110'	;
+#DEFINE T2CON_FASTEST					b'01111110'
+; CPU speeds
+#DEFINE coding_speed_eco				.1			;  1 MHz = eco     speed
+#DEFINE coding_speed_normal				.2			; 16 MHz = normal  speed
+#DEFINE coding_speed_fastest			.4			; 64 MHz = fastest speed (32 MHz on OSTC Sport BLE)
+#DEFINE speed_is_eco			cpu_speed_state,0	; =1: CPU is running at eco     speed
+#DEFINE speed_is_normal			cpu_speed_state,1	; =1: CPU is running at normal  speed
+#DEFINE speed_is_fastest		cpu_speed_state,2	; =1: CPU is running at fastest speed
 ; Divemode Custom View Indexes - Attention: these numbers need to be in line with the jump tables in customview.asm!
 #DEFINE index_avr_stopwatch				 .1			; average depth and stopwatch
 #DEFINE index_compass_dm				 .2			; compass
 #DEFINE index_ppo2_sensors				 .3			; ppO2 sensors
 #DEFINE index_ppo2_ead_end_cns			.11			; ppO2, END/EAD and CNS
 #DEFINE index_gf_factors				.12			; GF factors
 #DEFINE index_clock_batt_surfpress		.13			; clock, battery and surface pressure
 #DEFINE index_cv_dm_max					.13			; highest index in use in dive mode custom view
 ; Timing for button hold-down flags
 #DEFINE TMR1H_VALUE_FIRST				.255-.128	; in steps of 7.8125 ms -> 1    s
 #DEFINE TMR1H_VALUE_CONT				.255-.32	; in steps of 7.8125 ms -> 0.25 s
 #DEFINE TMR1H_VALUE_CONT_DIVE			.255-.64	; in steps of 7.8125 ms -> 0.5  s
 ; Color Definitions: 8 bit RGB b'RRRGGGBB'
 #DEFINE color_red						b'11100000'	; (7,0,0)
 #DEFINE color_dark_red					b'10000101'	; (4,1,1)
 #DEFINE color_violet					b'11101011'	; (7,2,3)
 #DEFINE color_cyan						b'11011111'	; (6,7,3)
 #DEFINE color_lightblue					b'11011011'	; (6,7,3)
 #DEFINE color_orange					b'11111000'	; (7,6,0)
 #DEFINE color_pink						b'11111010'	; (7,6,2)
-#DEFINE FT_TINY							.0
-#DEFINE FT_SMALL						.1
+; Font Sizes
-#DEFINE FT_MEDIUM						.2			; not used
+#DEFINE FT_TINY							.0			; aa_font16_block, full character set
-#DEFINE FT_LARGE						.3			; not used
+#DEFINE FT_SMALL						.1			; aa_font28_block, full character set
+#DEFINE FT_STANDARD						.2			; aa_font34_block, full character set
+#DEFINE FT_MEDIUM						.3			; aa_font48_block, only digits, /, ., :, ;, <, =, > and ?
+#DEFINE FT_LARGE						.4			; aa_font90_block, only digits, / and .
+#DEFINE FT_HUGE							.5			; aa_font92_block, only digits, / and .
 ; External O2 cell input Parameters
 #DEFINE min_mv							.80			; =   8 mV
 #DEFINE max_mv							.2500		; = 250 mV
 #DEFINE ignore_mv						.3500		; = 350 mV (to suppress ghost readings for long, open cables)
 ; Profile Recording Parameters
 #DEFINE logbook_profile_version			0x24
 #DEFINE samplingrate_apnoe				.1			; [seconds]
-; Attention: Divisors must be < 16 !
+; Profile Recording Rates - Attention: all Divisors must be < 16 !
 #DEFINE div_temperature					.6			; x sampling rate [s]
 #DEFINE div_deco						.6			; x sampling rate [s]
 #DEFINE div_gf							.12			; x sampling rate [s]
 #DEFINE div_ppo2_sensors				.2			; x sampling rate [s]
 #DEFINE div_decoplan					.12			; x sampling rate [s]
 #DEFINE div_cns							.12			; x sampling rate [s]
 #DEFINE div_tank						.0			; x sampling rate [s]
-; Attention: Information Lengths must be < 16 !
+; Profile Recording Data - Attention: Information Lengths must be < 16 !
 #DEFINE infolength_temperature			.2			; [byte]
 #DEFINE infolength_deco					.2			; [byte]
 #DEFINE infolength_gf					.1			; [byte]
 #DEFINE infolength_ppo2_sensors			.9			; [byte]
 #DEFINE infolength_decoplan				.15			; [byte]
 #DEFINE infolength_cns					.2			; [byte]
 #DEFINE infolength_tank					.0			; [byte]
-; RX Functions (no conditional compile because defines are used in options_table)
+; RX Functions
 #DEFINE rx_packet_overdue_timeout		.60			; [seconds]
 #DEFINE max_pres_diff_min				.5			; [bar] minimum selectable pressure difference for ind.double mode
 #DEFINE max_pres_diff_max				.50			; [bar] maximum selectable pressure difference for ind.double mode
+IFDEF _ccr_pscr
+#DEFINE tr_pres_options					.15			; number of options for pressure measurement source / with diluents
+ELSE
+#DEFINE tr_pres_options					.6			; number of options for pressure measurement source / OC gases only
+ENDIF
+; Cave Mode
+IFDEF _cave_mode
+#DEFINE calc_gas_options				.3			; 3 options: off, on, cave
+ELSE
+#DEFINE calc_gas_options				.2			; 2 options: off, on
+ENDIF
 ; Gas Needs Settings
 #DEFINE min_tank_size					.1			; [liter]
 #DEFINE max_tank_size					.40			; [liter]
 #DEFINE min_fill_press					.5			; [0 bar] value is in multiples of 10 bar
 #DEFINE max_fill_press					.29			; [0 bar] value is in multiples of 10 bar, no 300 bar due to too far beyond ideal gas laws
-;; "Better Gas" Behavior
+; Timeouts for Menus
-;#DEFINE minimum_change_depth			.2			; [m]
+#DEFINE surfmode_timeout_default		.90			; [s] default timeout for surface mode and surface menus
+#DEFINE surfmode_timeout_simulator		.240		; [s] special timeout for simulator (deco calculator) mode
-; Dive Mode Limits and Thresholds
+#DEFINE surfmode_timeout_sensor			.240		; [s] special timeout for surface mode when in CCR/pSCR sensor mode
-#DEFINE start_dive_threshold			.100		; [cm]
+#DEFINE surfmode_timeout_calibrate		.240		; [s] special timeout when in surface CCR calibrate sensors menu
-#DEFINE high_altitude_dive_threshold	.300		; [cm]
+#DEFINE surfmode_timeout_xmitter		.240		; [s] special timeout when in surface transmitter pairing menu
+#DEFINE divemode_timeout_premenu		.10			; [s] timeout for dive mode pre-menu
+#DEFINE divemode_timeout_mainmenu		.30			; [s] timeout for dive mode main menu
+; other Timeouts
+#DEFINE simulator_timeout				.15			; [s]
 #DEFINE apnoe_timeout					.15			; [min]
-#DEFINE divemode_menuview_timeout		.10			; [s]
-#DEFINE divemode_menu_timeout			.30			; [s]
+; Surface Mode Thresholds and Limits
-#DEFINE ppo2_warning_low_lowest			.15			; [cbar] (min.    value) for minimum on OC
+#DEFINE high_altitude_threshold			.880		; [mbar] ambient pressure at which to switch into high altitude mode
-#DEFINE ppo2_warning_low_default		.17			; [cbar] (default value) for minimum on OC
+#DEFINE max_surfpressure				.1030		; [mbar] maximum value for internal surface pressure
-#DEFINE ppo2_warning_low_highest		.21			; [cbar] (max.    value) for minimum on OC
-#DEFINE ppo2_warning_loop_lowest		.20			; [cbar] (min.    value) for minimum on loop
+; Dive Mode Thresholds and Limits
-#DEFINE ppo2_warning_loop_default		.40			; [cbar] (default Value) for minimum on loop
+#DEFINE wake_up_from_sleep				.1160		; [mbar] absolute pressure at which to switch from sleep mode to surface / dive mode
-#DEFINE ppo2_warning_loop_highest		.60			; [cbar] (max.    value) for minimum on loop
+#DEFINE dive_threshold_norm_alt_start	 .125		; [mbar] relative pressure for normal altitude start-of-dive (equals depth in cm)
+#DEFINE dive_threshold_norm_alt_end		  .75		; [mbar] relative pressure for normal altitude   end-of-dive (equals depth in cm)
-#DEFINE ppo2_warning_high_lowest		.120		; [cbar] (min.    value) for maximum in none-deco phase
+#DEFINE dive_threshold_high_alt_start	 .325		; [mbar] relative pressure for high   altitude start-of-dive (equals depth in cm)
-#DEFINE ppo2_warning_high_default		.160		; [cbar] (default value) for maximum in none-deco phase
+#DEFINE dive_threshold_high_alt_end		  .75		; [mbar] relative pressure for high   altitude   end-of-dive (equals depth in cm)
-#DEFINE ppo2_warning_high_highest		.160		; [cbar] (max.    value) for maximum in none-deco phase
+#DEFINE ostc_depth_max					 .120		; [m]    maximum allowed operational depth for OSTC 2, 3, cR, TR, Plus & Sport
-#DEFINE ppo2_warning_deco_lowest		.120		; [cbar] (min.    value) for maximum in deco phase
-#DEFINE ppo2_warning_deco_default		.160		; [cbar] (default Value) for maximum in deco phase
+; Dive Mode Margins
-#DEFINE ppo2_warning_deco_highest		.160		; [cbar] (max.    value) for maximum in deco phase
+#DEFINE ppO2_margin_on_max				.300		; [0.1 mbar] extra margin on ppO2 max values to compensate for surface pressures > 1000 hPa
-#DEFINE depth_warn_mbar					.13000		; [mbar]
-#DEFINE wake_up_from_sleep				.1160		; [mbar]
-#DEFINE simulator_timeout				.15			; [s]
 #DEFINE sensor_voting_logic_threshold	.10			; threshold in 0.01 bar
-; Surface Mode Limits and Thresholds
-#DEFINE high_altitude_threshold			.880		; [mbar]
+; ppO2 Limits
-#DEFINE max_surfpressure				.1080		; [mbar]
+#DEFINE ppo2_warning_low_lowest			.15			; [cbar] minimum value for minimum ppO2 on OC
-#DEFINE timeout_surfacemode				.240		; [s]		; ex 90 seconds
+#DEFINE ppo2_warning_low_default		.17			; [cbar] default value for minimum ppO2 on OC
-#DEFINE timeout_calibrate_menu			.240		; [s]
+#DEFINE ppo2_warning_low_highest		.21			; [cbar] maximum value for minimum ppO2 on OC
-#DEFINE timeout_tanksetup_menu			.240		; [s]
-#DEFINE timeout_ccr_surface				.240		; [s]
+#DEFINE ppo2_warning_loop_lowest		.20			; [cbar] minimum value for minimum ppO2 on loop
+#DEFINE ppo2_warning_loop_default		.40			; [cbar] default value for minimum ppO2 on loop
+#DEFINE ppo2_warning_loop_highest		.60			; [cbar] maximum value for minimum ppO2 on loop
+#DEFINE ppo2_warning_high_lowest		.120		; [cbar] minimum value for maximum ppO2 in none-deco phase
+#DEFINE ppo2_warning_high_default		.140		; [cbar] default value for maximum ppO2 in none-deco phase
+#DEFINE ppo2_warning_high_highest		.160		; [cbar] maximum value for maximum ppO2 in none-deco phase
+#DEFINE ppo2_warning_deco_lowest		.120		; [cbar] minimum value for maximum ppO2 in deco phase
+#DEFINE ppo2_warning_deco_default		.160		; [cbar] default value for maximum ppO2 in deco phase
+#DEFINE ppo2_warning_deco_highest		.160		; [cbar] maximum value for maximum ppO2 in deco phase
 ; Deco-Model Parameters
-#DEFINE deco_distance					.10			; [dm]
+#DEFINE deco_distance					.0			; [dm]		ex .10
 ; Color-Code Parameters for the Dive Mode
 #DEFINE color_code_velocity_warn_high	.11			; [m/min]
 #DEFINE color_code_velocity_attn_high	.10			; [m/min]
-#DEFINE velocity_display_threshold_1	.3			; [m/min]
+#DEFINE velocity_display_threshold		.3			; [m/min]
+; Simulator Parameters
+#DEFINE simulator_startdepth			.200		; [mbar] initial depth (relative pressure) when entering simulator mode
+#DEFINE simulator_descent_threshold		.50			; [mbar] remaining distance to target pressure when to slow down descent
+#DEFINE simulator_ascent_threshold		.50			; [mbar] remaining distance to target pressure when to slow down ascent
+#DEFINE simulator_descent_rate			.4			; [mbar/0.125 sec] normal sescent speed, 4 equals 19 m/min
+#DEFINE simulator_ascent_rate			.2			; [mbar/0.125 sec] normal ascent  speed, 2 equals  9 m/min
 ; Battery Thresholds
-#DEFINE max_allowed_battery_temp			.3181	; Max temperature before charging is disabled in 0.1K
+#DEFINE max_battery_charge_temp			.3231		; [0.1 Kelvin] max allowed battery temperature during charging (equals 50�C)
 #DEFINE lithium_36v_empty				.2400		; [mV] Saft 3.6 V LS14500 AA - threshold for battery percent display
-#DEFINE lithium_36v_low					.2000		; [mV] (must be bigger than aa_15v_high!)
+#DEFINE lithium_36v_low					.2000		; [mV] Saft 3.6 V LS14500 AA - lowest  possible voltage, value must be higher than value of aa_15v_high!
-#DEFINE aa_15v_high						.1550		; [mV] Energizer 1.5 V E2 AA
+#DEFINE aa_15v_high						.1550		; [mV] Energizer 1.5 V E2 AA - highest possible voltage, value must be lower  than value of lithium_36v_low!
-#DEFINE aa_15v_low						.1100		; [mV] according to Energizer data sheet EBC-4201R, page 2
+#DEFINE aa_15v_low						.1100		; [mV] Energizer 1.5 V E2 AA - lowest  possible voltage, according to Energizer data sheet EBC-4201R, page 2
-#DEFINE color_code_battery_low			.30			; [%]  also acts as threshold for setting brightness level ECO when in dive mode
+#DEFINE battery_show_level				.30			; [%]  threshold when to show battery level
-#DEFINE battery_show_level				.24			; [%]
+#DEFINE color_code_battery_low			.30			; [%]  threshold for battery level color coding, also acts as threshold for setting display brightness level to ECO when in dive mode
-; 3.6 Volt Battery sensing Data Points at 70 mA Load
+; 3.6 Volt Battery Sensing Data Points at 70 mA Load
 #DEFINE lithium_36v_75					.3000		; [mV]
 #DEFINE lithium_36v_50					.2900		; [mV]
 #DEFINE lithium_36v_25					.2600		; [mV]
 #DEFINE lithium_36v_10					.2500		; [mV]
 ; Capacity for 2.4 Ah Saft LS14500 and 0.8 Ah Panasonic UR14500P
-; battery_gauge:6 is nAs
+; battery_gauge: 6 is nAs
 ; devide through 65536
 ;    a) devide through 364 -> result is in percent of a 2.4 Ah battery
 ; or b) devide through 121 -> result is in percent of a 0.8 Ah battery
 ; internal Battery Gauging
-#DEFINE internal_saft_capacity			.364
+#DEFINE capacity_saft_internal			.364
-#DEFINE internal_panasonic_capacity		.121
+#DEFINE capacity_panasonic_internal		.121
 ; Gauge IC
-#DEFINE saft_capacity					.281		; 2.4Ah/0.085mAh/100 [%]
+#DEFINE capacity_saft					.281		; 2.4Ah/0.085mAh/100 [%]
-#DEFINE saft_offset						.37300		; 65536-(2.4Ah/0.085mAh)
+#DEFINE offset_saft						.37300		; 65536-(2.4Ah/0.085mAh)
-#DEFINE panasonic_capacity				.94			; 0.8Ah/0.085mAh/100 [%]
+#DEFINE capacity_panasonic				.94			; 0.8Ah/0.085mAh/100 [%]
-#DEFINE panasonic_offset				.56124		; 65536-(0.8Ah/0.085mAh)
+#DEFINE offset_panasonic				.56124		; 65536-(0.8Ah/0.085mAh)
-#DEFINE ncr18650_capacity				.364		; 3.1Ah/0.085mAh/100 [%]
+#DEFINE capacity_ncr18650				.364		; 3.1Ah/0.085mAh/100 [%]
-#DEFINE ncr18650_offset					.29065		; 65536-(3.1Ah/0.085mAh)
+#DEFINE offset_ncr18650					.29065		; 65536-(3.1Ah/0.085mAh)
-#DEFINE ur16650_capacity				.271		; 2.3Ah/0.085mAh/100 [%]
+#DEFINE capacity_ur16650				.271		; 2.3Ah/0.085mAh/100 [%]
-#DEFINE ur16650_offset					.38477		; 65536-(2.3Ah/0.085mAh)
+#DEFINE offset_ur16650					.38477		; 65536-(2.3Ah/0.085mAh)
+; Power Consumption Values
 #DEFINE current_sleepmode				.31
-#DEFINE current_backlight_multi			.115		; * CCPR1L + current_backlight_offset
+#DEFINE current_backlight_multi			.115		; * CCPR1L + current_backlight_offset (restricted to  <= 255)
 #DEFINE current_backlight_offset		.216
 #DEFINE current_speed_eco				.1914
 #DEFINE current_speed_normal			.4027
 #DEFINE current_speed_fastest			.5050
 #DEFINE current_ir_receiver				.139
 #DEFINE current_compass					.28
-; Brightness Thresholds (between zero (off) and 255 (max. power))
+; Brightness Thresholds (between zero (off) and 255 (max. power consumption))
 #DEFINE ambient_light_max_high_36V		.170
 #DEFINE ambient_light_max_high_cr		.240
 #DEFINE ambient_light_max_high_15V		.140
 #DEFINE ambient_light_min_high			.35
 #DEFINE ambient_light_max_medium		.125
 #DEFINE ambient_light_min_medium		.25
 #DEFINE ambient_light_max_eco			.70
 #DEFINE ambient_light_min_eco			.10			; must be the lowest value!
 ; IR Link Timeout
-#DEFINE ir_timeout_value				.64			; multiples of 62.5 ms
+#DEFINE ir_timeout_value				.64			; in multiples of 62.5 ms
 ; Setpoint Control
 #DEFINE surface_sp						.50			; in cbar
 ; Gaslist hard-coded Limits
-#DEFINE gaslist_min_o2					.6					; minimum O2 [%]
+IFDEF _helium
-#DEFINE gaslist_max_He					.100-gaslist_min_o2	; maximum He [%]
+#DEFINE gaslist_min_o2					.7			; minimum O2 [%] ( 7% is minimum value to keep MOD < 255 meters / 1 Byte)
-#DEFINE gaslist_max_change_depth		.99			; max. change depth [m]
+#DEFINE gaslist_max_He			.100-gaslist_min_o2 ; maximum He [%]
+#DEFINE gaslist_max_change_depth		.220		; max. change depth [m] (219 is maximum value that can be produced by gaslist_calc_mod with 7% O2)
+#DEFINE tissue_graphics_options			.2			; tissue graphics "Pres+Sat" and "N2+He" available
+ELSE
+#DEFINE gaslist_min_o2					.21			; minimum O2 [%]
+#DEFINE gaslist_max_He					.0			; maximum He [%]
+#DEFINE gaslist_max_change_depth		.70			; max. change depth [m] (67 is maximum value that can be produced by gaslist_calc_mod with 21% O2)
+#DEFINE tissue_graphics_options			.1			; tissue graphics "Pres+Sat" only available
+ENDIF
+; Setpoint list hard-coded Limits
 #DEFINE gaslist_sp_stepsize				.10			; steps for setpoint setup [cbar]
 #DEFINE gaslist_sp_max					.160		; max. setpoint [cbar]
 #DEFINE gaslist_sp_min					.50			; min. setpoint [cbar]
 ; Compass Display
-#DEFINE compass_fast_treshold			.9			; show new heading instantly if new and old > compass_fast_treshold
+#DEFINE compass_fast_treshold			.9			; show new heading instantly if angular difference > compass_fast_treshold, else show animated turning of compass rose
-#DEFINE compass_averaging				.10			; numbers of extra averaging
+#DEFINE compass_averaging				.10			; number of averaging cycles
 ; Bit Flags for Communication with p2_deco.c - char_O_main_status
-#DEFINE DECO_COMPLETED_NORM				.0			; the calculation of a normal       deco plan has just been completed
+#DEFINE DECO_VOLUME_FLAG				.0			; =1: calculate gas needs
-#DEFINE DECO_COMPLETED_ALT				.1			; the calculation of an alternative deco plan has just been completed
+#DEFINE DECO_BOTTOM_FLAG				.1			; =1: calculate gas needs for full bottom segment, =0: ...for extra time only
-;       DECO_MODE_LOOP_FLAG				.2			; defined below, also used for char_O_main_status
+#DEFINE DECO_CAVE_MODE					.2			; =1: calculate ascent and gas needs using backtracking data
-;       DECO_MODE_PSCR_FLAG				.3			; defined below, also used for char_O_main_status
+#DEFINE DECO_Z_FACTOR_FLAG				.3			; =1: calculate with Z factor when converting gas volumes <-> pressures
-#DEFINE DECO_Z_FACTOR_FLAG				.4			; =1: figure in Z factor when converting gas volumes <-> pressures
+#DEFINE DECO_TR_FUNCTIONS				.4			; =1: calculate TR functions (pressure readings)
-#DEFINE DECO_CAVE_MODE					.5			; =1: compute ascent and gas needs using backtracking data
+#DEFINE DECO_EXTENDED_STOPS				.5			; =1: place gas changes also below 1st stop depth
-#DEFINE DECO_BOTTOM_FLAG				.6			; =1: compute with bottom time (deco calculator), =0: with extra time (dive mode)
+#DEFINE DECO_MODE_LOOP_FLAG				.6			; =1: calculate real tissues in loop mode (CCR or pSCR)
-#DEFINE DECO_TR_FUNCTIONS				.7			; =1: compute TR functions (pressure readings)
+#DEFINE DECO_MODE_PSCR_FLAG				.7			; =1: calculate real tissues in pSCR mode (loop flag needs to be set, too)
 ; Bit Flags for Communication with p2_deco.c - char_O_deco_status
-#DEFINE DECO_STATUS_0_FLAG				.0
+#DEFINE DECO_START_NORM					.0			; =1: write: start calculation of a  normal      deco plan
-#DEFINE DECO_STATUS_1_FLAG				.1
+#DEFINE DECO_START_ALT					.1			; =1: write: start calculation of an alternative deco plan
-#DEFINE DECO_MODE_LOOP_FLAG				.2
+#DEFINE DECO_COMPLETED_NORM				.0			; =1: read:  calculation of a  normal      deco plan has completed
-#DEFINE DECO_MODE_PSCR_FLAG				.3
+#DEFINE DECO_COMPLETED_ALT				.1			; =1: read:  calculation of an alternative deco plan has completed
-#DEFINE DECO_PLAN_FLAG					.4
+#DEFINE DECO_INITIALIZE					.2			; =1: write: initialize deco engine (to be done only once at the begin of every dive)
-#DEFINE DECO_BAILOUT_FLAG				.5			; =1: do a bailout calculation, i.e. allow gas switches before first deco stop
+;										.3			; unused
-#DEFINE DECO_VOLUME_FLAG				.6
+#DEFINE DECO_BAILOUT_FLAG				.4			; =1: allow gas switches before first deco stop (used in bailout plans)
-#DEFINE DECO_ASCENT_FLAG				.7
+#DEFINE DECO_ASCENT_FLAG				.5			; =1: figure in a delayed ascent (fTTS)
+;       DECO_MODE_LOOP_FLAG				.6			; =1: calculate simulated tissues in loop mode (CCR or pSCR)
+;       DECO_MODE_PSCR_FLAG				.7			; =1: calculate simulated tissues in pSCR mode (loop flag needs to be set, too)
 ; Bit Flags for Communication with p2_deco.c - char_O_deco_warnings
-#DEFINE IBCD_warning					.0
+#DEFINE IBCD_warning					.0			; =1: IBCD currently occuring
-#DEFINE IBCD_warning_lock				.1
+#DEFINE IBCD_warning_lock				.1			; =1: IBCD occured durign the dive
-#DEFINE mbubble_warning					.2
+#DEFINE mbubble_warning					.2			; =1: microbubbles potentionally currently occuring
-#DEFINE mbubble_warning_lock			.3
+#DEFINE mbubble_warning_lock			.3			; =1: microbubbles potentionally occured during the dive
-#DEFINE outside_warning					.4
+#DEFINE outside_warning					.4			; =1: currently outside the ZHL-16 model
-#DEFINE outside_warning_lock			.5
+#DEFINE outside_warning_lock			.5			; =1: was outside the ZHL-16 model during the dive
-#DEFINE outside_attention				.6
+#DEFINE outside_attention				.6			; =1: currently near to the limits of the ZHL-16 model
-#DEFINE stoptable_overflow				.7
+#DEFINE stoptable_overflow				.7			; =1: more stops needed than can be stored
 ; Bit Flags for Communication with p2_deco.c - char_O_deco_info
 #DEFINE deco_flag						.0			; =1: in deco mode, deco ppO2 levels permitted
 #DEFINE ind_double_switch				.1			; =1: switch to other tank advice active
-#DEFINE deco_steady						.2			; =1: fTTS is = TTS (not updated when in bailout mode)
+;										.2			; --- unused
-#DEFINE deco_decreasing					.3			; =1: fTTS is < TTS (not updated when in bailout mode)
+#DEFINE deco_zone						.3			; =1: fTTS is <= TTS (not updated when in bailout mode)
 #DEFINE deco_ceiling					.4			; =1: ceiling depth > 0
-#DEFINE gas_needs_cave					.5			; =1: indicated gas needs are calculated in cave mode
+#DEFINE deco_stops						.5			; =1: deco stops found
+#DEFINE gas_needs_cave					.6			; =1: indicated gas needs are calculated in cave mode
+;										.7			; --- unused
 ; Bit Flags for Status on Variables of Type char
 #DEFINE char_transmitter_lost			.6
 #DEFINE char_invalid_flag				.7
 #DEFINE char_transmitter_low_bat		.7
 ; Bit Flags for Status on Variables of Type int (Flags are placed in the upper byte)
 #DEFINE int_invalid_flag				.2
 #DEFINE int_not_yet_computed			.3
 #DEFINE int_is_zero						.3
 #DEFINE int_high_flag					.5
 #DEFINE int_outdated_flag				.5
 #DEFINE int_attention_flag				.6
 #DEFINE int_warning_flag				.7
 ;-----------------------------------------------------------------------------
-; Flags
+; Timebase and Eventbase (stored in access RAM, set by the ISR, trigger flags to be cleared by the application)
-; Hardware Descriptor 1
+#DEFINE timebase_0sec			timebase,0			; counting timebase, 1/2 sec bit
-#DEFINE battery_gauge_available	hardware_flag1,0	; =1: OSTC has rechargeable battery with battery management chip
+#DEFINE timebase_1sec			timebase,1			; counting timebase,  1  sec bit
-#DEFINE ambient_sensor			hardware_flag1,1	; =1: OSTC has an ambient light sensor
+#DEFINE timebase_2sec			timebase,2			; counting timebase,  2  sec bit
-#DEFINE analog_o2_input			hardware_flag1,2	; =1: OSTC has analog inputs and S8 digital
+#DEFINE trigger_quarter_second	timebase,3			; =1: a new 1/4 second has begun (not synced with the other time flags, not generated while block_sensor_interrupt is set)
-#DEFINE optical_input			hardware_flag1,3	; =1: OSTC has an digital optical input
+#DEFINE trigger_half_second		timebase,4			; =1: a new 1/2 second has begun
-#DEFINE ble_available			hardware_flag1,4	; =1: OSTC has an BLE module
+#DEFINE trigger_full_second		timebase,5			; =1: a new 1/1 second has begun
-#DEFINE ostc_rx_present			hardware_flag1,5	; =1: OSTC has RX circuity
+#DEFINE trigger_full_minute		timebase,6			; =1: a new     minute has begun
-;								hardware_flag1,6	; --- unused
+#DEFINE trigger_full_hour		timebase,7			; =1: a new     hour   has begun
-;								hardware_flag1,7	; --- unused
+#DEFINE trigger_isr_updates		 eventbase,0		; =1: the ISR had kicked in (set by ISR, used by ISR-safe copy macros)
-; Hardware Descriptor 2
+#DEFINE trigger_timeout			 eventbase,1		; =1: timeout signal by timeout service
-#DEFINE screen_type			hardware_flag2,0	; =1: display 1, =0; display 0
+#DEFINE trigger_sample_divedata	 eventbase,2		; =1: time to store a new sample
-#DEFINE compass_type			hardware_flag2,1	; =1: compass 1, =0: compass 0
+#DEFINE trigger_S8_data_update	 eventbase,3		; =1: new S8 digital   data  are available
-#DEFINE compass_type2			hardware_flag2,2	; =1: compass 2, =0: compass 0 or 1
+#DEFINE trigger_pres_update		 eventbase,4		; =1: new pressure     value is  available
-#DEFINE analog_switches			hardware_flag2,3	; =1: analog switches available
+#DEFINE trigger_pres_cur_changed eventbase,5		; =1: current pressure value has changed
-#DEFINE	screen_type2			hardware_flag2,4	; =1: display 2, =0: display 0 or 1
+#DEFINE trigger_pres_max_changed eventbase,6		; =1: maximum pressure value has changed
-;								hardware_flag2,5	; --- unused
+#DEFINE trigger_temp_changed	 eventbase,7		; =1: temperature      value has changed
-;								hardware_flag2,6	; --- unused
-;								hardware_flag2,7	; --- unused
+;-----------------------------------------------------------------------------
-; Control of numerical Output
+; Flags - stored in access RAM
-#DEFINE leftbind				cvt_flags+0,0
-#DEFINE ignore_digit3			cvt_flags+0,1
+;---- Hardware - OSTC Model Descriptor (stored in access RAM, cleared & rebuilt in restart, to preserve compatibility with 3rd party tools DO NOT alter bit positions)
-#DEFINE ignore_digit4			cvt_flags+0,2
+#DEFINE battery_gauge_available	HW_descriptor,0		; =1: OSTC has rechargeable battery with battery management chip
-#DEFINE ignore_digit5			cvt_flags+0,3
+#DEFINE ambient_sensor			HW_descriptor,1		; =1: OSTC has an ambient light sensor
-;								cvt_flags+0,4		; --- unused
+#DEFINE analog_o2_input			HW_descriptor,2		; =1: OSTC has analog inputs and S8 digital
-;								cvt_flags+0,5		; --- unused
+#DEFINE optical_input			HW_descriptor,3		; =1: OSTC has an digital optical input
-;								cvt_flags+0,6		; --- unused
+#DEFINE ble_available			HW_descriptor,4		; =1: OSTC has an BLE module
-;								cvt_flags+0,7		; --- unused
+#DEFINE ostc_rx_present			HW_descriptor,5		; =1: OSTC has RX module
+#DEFINE lv_core					HW_descriptor,6		; =1: OSTC has low-voltage core (2.7V)
-#DEFINE pre_zero_flag			cvt_flags+1,0
+;								HW_descriptor,7		; --- reserved
-#DEFINE all_zeros_flag			cvt_flags+1,1
-#DEFINE DP_done					cvt_flags+1,2
+;---- Hardware - OSTC Model Variants (stored in access RAM, NOT cleared in restart)
-#DEFINE DP_done2				cvt_flags+1,3
+#DEFINE screen_type				HW_variants,0		; =1: display 1, =0; display 0
-#DEFINE show_last3				cvt_flags+1,4
+#DEFINE screen_type2			HW_variants,1		; =1: display 2, =0: display 0 or 1
-#DEFINE leading_zeros			cvt_flags+1,5
+#DEFINE compass_type			HW_variants,2		; =1: compass 1, =0: compass 0
-#DEFINE show_last4				cvt_flags+1,6
+#DEFINE compass_type2			HW_variants,3		; =1: compass 2, =0: compass 0 or 1
-;								cvt_flags+1,7		; --- unused
+#DEFINE analog_switches			HW_variants,4		; =1: analog switches available
+#DEFINE battery_is_36v			HW_variants,5		; =1: a 3.6 Volt battery is detected
-; HUD Status Byte
+#DEFINE cc_active				HW_variants,6		; =1: constant current charging active (cR hardware only)
+#DEFINE cv_active				HW_variants,7		; =1: constant voltage charging active (cR hardware only)
+;---- Hardware - States (stored in access RAM)
+#DEFINE analog_sw1_pressed		HW_flags_state,0	; =1: analog switch 1 pressed
+#DEFINE analog_sw2_pressed		HW_flags_state,1	; =1: analog switch 2 pressed
+#DEFINE switch_left				HW_flags_state,2	; =1: left  button was pressed
+#DEFINE switch_right			HW_flags_state,3	; =1: right button was pressed
+#DEFINE flip_screen				HW_flags_state,4	; =1: screen is shown 180� turned
+#DEFINE adc_is_running			HW_flags_state,5	; =1: the ADC is in use
+#DEFINE tft_is_dimming			HW_flags_state,6	; =1: the TFT is dimming, ignore light sensor
+#DEFINE compass_enabled			HW_flags_state,7	; =1: the compass and accelerometer chip is active
+;---- Operating System - persistent Settings (stored in access RAM, NOT cleared in restart)
+#DEFINE sensor1_calibrated_ok	OS_flags_persist,0	; =1: sensor 1 calibration ok
+#DEFINE sensor2_calibrated_ok	OS_flags_persist,1	; =1: sensor 2 calibration ok
+#DEFINE sensor3_calibrated_ok	OS_flags_persist,2	; =1: sensor 3 calibration ok
+#DEFINE compass_bearing_set		OS_flags_persist,3	; =1: compass bearing is set
+#DEFINE use_old_batt_flag		OS_flags_persist,4	; =1: load old battery data after power-on reset
+#DEFINE option_repaired			OS_flags_persist,5	; =1: options have been repaired
+#DEFINE restart_fast			OS_flags_persist,6	; =1: skip logos and waits on restart
+#DEFINE battery_overtemp		OS_flags_persist,7	; =1: battery charging temperature limit exceeded
+;---- Operating System - ISR Control 1 (stored in access RAM)
+#DEFINE reset_timebase			OS_flags_ISR1,0		; =1: request ISR to reset the timebase for the trigger flags
+#DEFINE reset_timeout			OS_flags_ISR1,1		; =1: request ISR to reset the timeout timer
+#DEFINE reset_max_pressure		OS_flags_ISR1,2		; =1: request ISR to reset the maximum pressure to zero
+#DEFINE reset_surface_interval	OS_flags_ISR1,3		; =1: request ISR to reset the surface interval to zero
+#DEFINE reset_trip_pressure		OS_flags_ISR1,4		; =1: request ISR to reset the resettable min/max pressure
+#DEFINE block_rtc_access		OS_flags_ISR1,5		; =1: suspend the ISR from accessing the RTC
+#DEFINE block_battery_gauge		OS_flags_ISR1,6		; =1: suspend the ISR from updating the battery gauge
+#DEFINE block_sensor_interrupt	OS_flags_ISR1,7		; =1: suspend the ISR from executing sensor interrupts
+;---- Operating System - ISR Control 2 (stored in access RAM)
+#DEFINE update_surface_pressure	OS_flags_ISR2,0		; =1: request ISR to update the surface pressure
+#DEFINE quit_simulatormode		OS_flags_ISR2,1		; =1: request ISR to quit the simulator mode
+#DEFINE count_divetime			OS_flags_ISR2,2		; =1: request ISR to count the dive time
+#DEFINE sensor_override_request	OS_flags_ISR2,3		; =1: request ISR to override the pressure sensor with a simulated depth
+;								OS_flags_ISR2,4		; --- unused
+;								OS_flags_ISR2,5		; --- unused
+#DEFINE sensor_override_active	OS_flags_ISR2,6		; =1: ISR output:    switch to override-mode confirmed
+#DEFINE divetime_longer_1min	OS_flags_ISR2,7		; =1: ISR output:    dive time is >= one minute
+;---- Operating Modes (stored in access RAM, persistent)
+#DEFINE sleepmode				OM_flags_mode,0		; =1: in sleep mode
+#DEFINE divemode				OM_flags_mode,1		; =1: in dive mode
+#DEFINE simulatormode			OM_flags_mode,2		; =1: in simulator mode
+#DEFINE high_altitude_mode		OM_flags_mode,3		; =1: unit was manually turned on with absolute pressure < 880 mbar
+#DEFINE s8_digital_avail		OM_flags_mode,4		; =1: S8 digital interface is available
+#DEFINE tr_functions_activated	OM_flags_mode,5		; =1: TR module is available and TR mode is <> off
+#DEFINE cold_start				OM_flags_mode,6		; =1: restart is entered from a cold start
+IFDEF _screendump
+#DEFINE screen_dump_avail		OM_flags_mode,7		; =1: screen dump function is available
+ELSE
+#DEFINE comm_mode_disabled		OM_flags_mode,7		; =1: COMM mode is disabled
+ENDIF
+;---- Dive Modes - Deco Modes (stored in access RAM)
+#DEFINE FLAG_oc_mode			DM_flags_deco,0		; =1: in OC mode active
+#DEFINE FLAG_ccr_mode			DM_flags_deco,1		; =1: in CCR mode (fixed ppO2 or sensor) active
+#DEFINE FLAG_gauge_mode			DM_flags_deco,2		; =1: in gauge mode
+#DEFINE FLAG_apnoe_mode			DM_flags_deco,3		; =1: in apnoe mode
+#DEFINE FLAG_pscr_mode			DM_flags_deco,4		; =1: in pSCR mode
+#DEFINE bailout_mode			DM_flags_deco,5		; =1: in bailout mode
+#DEFINE apnoe_at_surface		DM_flags_deco,6		; =1: at the surface, 0= submerged (apnoe mode only, set/reset by ISR)
+#DEFINE apnoe_new_dive			DM_flags_deco,7		; =1: a new dive has begun         (apnoe mode only, set       by ISR)
+;-----------------------------------------------------------------------------
+; Flags - stored in bank common
+;---- Dive Mode - Dive States
+#DEFINE use_aGF					DM_flags_state,0	; =1: use aGF, =0: use GF
+#DEFINE sp_fallback				DM_flags_state,1	; =1: fall-back to SP1 due to external O2 sensor failure
+#DEFINE dive_turned				DM_flags_state,2	; =1: dive is turned
+#DEFINE cave_mode				DM_flags_state,3	; =1: in cave mode (gas needs by backtracking)
+#DEFINE depth_limit_exceeded	DM_flags_state,4	; =1: depth limit exceeded
+;								DM_flags_state,5	; --- unused
+;								DM_flags_state,6	; --- unused
+;								DM_flags_state,7	; --- unused
+;---- Dive Mode - O2 Sensors
+#DEFINE use_O2_sensor1			DM_flags_sensor,0	; =1: sensor 1 shall be used
+#DEFINE use_O2_sensor2			DM_flags_sensor,1	; =1: sensor 2 shall be used
+#DEFINE use_O2_sensor3			DM_flags_sensor,2	; =1: sensor 3 shall be used
+#DEFINE voting_logic_sensor1	DM_flags_sensor,3	; =1: sensor 1 is within the voting logic threshold
+#DEFINE voting_logic_sensor2	DM_flags_sensor,4	; =1: sensor 2 is within the voting logic threshold
+#DEFINE voting_logic_sensor3	DM_flags_sensor,5	; =1: sensor 3 is within the voting logic threshold
+;								DM_flags_sensor,6	; --- unused
+;								DM_flags_sensor,7	; --- unused
+;---- Dive Mode - User Requests
+#DEFINE request_gaschange		DM_flags_request,0	; =1: request to change the gas
+#DEFINE request_reset_avg		DM_flags_request,1	; =1: request to reset the average depth
+#DEFINE request_next_custview	DM_flags_request,2	; =1: request to show the next custom view
+#DEFINE request_back_to_loop	DM_flags_request,3	; =1: request to switch back from bailout to loop
+#DEFINE request_toggle_GF		DM_flags_request,4	; =1: request to toggle between GF and aGF
+#DEFINE request_set_marker		DM_flags_request,5	; =1: request to set a marker in the logbook
+#DEFINE request_turn_dive		DM_flags_request,6	; =1: request to toggle the dive turned status
+;								DM_flags_request,7	; --- unused
+;---- Dive Mode - Data Recording Events
+#DEFINE event_occured			DM_flags_event,0	; =1: an event occurred (global indicator flag)
+#DEFINE event_gas_change		DM_flags_event,1	; =1: a change to another gas or diluent occurred
+#DEFINE event_gas_change_gas6	DM_flags_event,2	; =1: a change to or of the gas 6 has occurred
+#DEFINE event_bailout			DM_flags_event,3	; =1: a change to or of the OC gas occurred due to bailout
+#DEFINE event_SP_change			DM_flags_event,4	; =1: a change of the setpoint has occurred
+;								DM_flags_event,5	; --- unused
+#DEFINE rs232_rx_timeout		DM_flags_event,6	; =1: RS232 receive timeout occurred  | no better place found
+#DEFINE i2c_error_flag			DM_flags_event,7	; =1: an I2C error occurred           | for these two flags...
+;---- Dive Mode - Display Control / Layout
+#DEFINE safety_stop_enabled		DM_flags_layout1,0	; =1: safety        stop is enabled
+#DEFINE safety_stop_active		DM_flags_layout1,1	; =1: safety        stop is shown
+#DEFINE decostop_active			DM_flags_layout1,2	; =1: decompression stop is shown
+#DEFINE velocity_active_num		DM_flags_layout1,3	; =1: numerical velocity indicator is shown
+#DEFINE velocity_active_vsi		DM_flags_layout1,4	; =1: graphical velocity indicator is shown
+#DEFINE alt_layout_active		DM_flags_layout1,5	; =1: the alternative dive layout is used (aka "blind mode")
+#DEFINE neg_flag_velocity		DM_flags_layout1,6	; =1: descending, used by velocity logic
+#DEFINE show_only_divemins		DM_flags_layout1,7	; =1: only dive minutes are shown
+#DEFINE cur_depth_greater_100m	DM_flags_layout2,0	; =1: current depth > 100 meters
+#DEFINE max_depth_greater_100m	DM_flags_layout2,1	; =1: max.    depth > 100 meters
+#DEFINE depth_attention			DM_flags_layout2,2	; =1: show depth in attention color
+#DEFINE depth_warning			DM_flags_layout2,3	; =1: show depth in warning   color
+#DEFINE depth_warn_att_last		DM_flags_layout2,4	; =1: last depth was shown in warning or attention color
+#DEFINE depth_inverse_last		DM_flags_layout2,5	; =1: last depth was shown in inverse
+#DEFINE gas_needs_mode_last		DM_flags_layout2,6	; =1: last gas needs were computed for cave mode, =0: direct ascent
+#DEFINE tts_greater_99			DM_flags_layout2,7	; =1: TTS > 99 minutes
+;---- Dive Mode - Display Control / Messages
+#DEFINE message_advice			DM_flags_message,0	; =1: an advice    is active in dive mode
+#DEFINE message_attention		DM_flags_message,1	; =1: an attention is active in dive mode or surface mode
+#DEFINE message_warning			DM_flags_message,2	; =1: a warning    is active in dive mode or surface mode
+#DEFINE message_2nd_row_used	DM_flags_message,3	; =1: the second row contains a warning/attention/advice
+#DEFINE sign_shown				DM_flags_message,4	; =1: the warning/attention/advice sign is shown
+#DEFINE gas_needs_attention		DM_flags_message,5	; =1: the gas needs  attention has been shown before
+#DEFINE gas_needs_warning		DM_flags_message,6	; =1: the gas needs  warning   has been shown before
+#DEFINE o2_sensors_warning		DM_flags_message,7	; =1: the O2 sensors warning   has been shown before
+;---- Dive Mode - Display Control / Gas, Diluent
+#DEFINE better_gas_hint			DM_flags_gas_dil,0	; =1: mark a gas when it is a better gas
+#DEFINE better_gas_available	DM_flags_gas_dil,1	; =1: a better gas is available
+#DEFINE better_gas_blinking		DM_flags_gas_dil,2	; =1: gas is blinking
+#DEFINE better_dil_available	DM_flags_gas_dil,3	; =1: a better diluent is available
+#DEFINE better_dil_blinking		DM_flags_gas_dil,4	; =1: diluent is blinking
+;								DM_flags_gas_dil,5	; --- unused
+;								DM_flags_gas_dil,6	; --- unused
+;								DM_flags_gas_dil,7	; --- unused
+;---- Menu System - Control
+#DEFINE surfmode_menu			MS_flags_control,0	; =1: surface      menu is shown (i.e. returning from it)
+#DEFINE dive_options_menu		MS_flags_control,1	; =1: dive options menu is shown (e.g. "Menu?")
+#DEFINE dive_main_menu			MS_flags_control,2	; =1: dive mode    menu is shown (i.e. the "big" menu)
+#DEFINE compass_menu			MS_flags_control,3	; =1: "set bearing"     is shown
+#DEFINE is_diluent_menu			MS_flags_control,4	; =1: setting up diluents, =0: setting up OC gases
+#DEFINE is_bailout_menu			MS_flags_control,5	; =1: in bailout menu
+;								MS_flags_control,6	; --- unused
+;								MS_flags_control,7	; --- unused
+;---- Menu System - Data Imprinting
+#DEFINE imprint_time_date		MS_flags_imprint,0	; =1: imprint current time & date
+#DEFINE imprint_color_schemes	MS_flags_imprint,1	; =1: imprint color schemes
+#DEFINE imprint_sensor_mv		MS_flags_imprint,2	; =1: imprint O2 sensor mV data
+#DEFINE imprint_xmitter_pres	MS_flags_imprint,3	; =1: imprint transmitter pressure data
+#DEFINE imprint_xmitter_ID		MS_flags_imprint,4	; =1: in transmitter-to-tank pairing menu
+#DEFINE imprint_surfmode_data	MS_flags_imprint,5	; =1: imprint surface mode data
+#DEFINE block_option_value		MS_flags_imprint,6	; =1: suspend display of option values
+;								MS_flags_imprint,7	; --- unused
+;---- Font & Image System
+#DEFINE aa_antialias			AA_flags,0			;     used by aa_wordprocessor
+#DEFINE aa_color_quarter		AA_flags,1			;     used by aa_wordprocessor
+#DEFINE aa_color_half			AA_flags,2			;     used by aa_wordprocessor
+#DEFINE aa_aux_flag				AA_flags,3			;     auxiliary flag for various purposes
+#DEFINE use_custom_colors		AA_flags,4			; =1: override default pixel colors, used by color_image
+;								AA_flags,5			; --- unused
+;								AA_flags,6			; --- unused
+;								AA_flags,7			; --- unused
+;---- Convert and Display Functions (Control of numerical and other Output)
+#DEFINE leftbind				CVT_flags1,0		; =1: align numbers to the left
+#DEFINE win_invert				CVT_flags1,1		; =1: the text   shall be printed in inverse
+#DEFINE short_gas_descriptions	CVT_flags1,2		; =1: use short versions of gaslist_strcat_gas_cd and gaslist_strcat_setpoint
+#DEFINE ignore_digit3			CVT_flags1,3
+#DEFINE ignore_digit4			CVT_flags1,4
+#DEFINE ignore_digit5			CVT_flags1,5
+#DEFINE aux_flag				CVT_flags1,6		;     provided for local boolean arguments and storage
+;								CVT_flags1,7		; --- unused
+#DEFINE pre_zero_flag			CVT_flags2,0
+#DEFINE all_zeros_flag			CVT_flags2,1
+#DEFINE DP_done					CVT_flags2,2
+#DEFINE DP_done2				CVT_flags2,3
+#DEFINE show_last3				CVT_flags2,4
+#DEFINE leading_zeros			CVT_flags2,5
+#DEFINE show_last4				CVT_flags2,6
+#DEFINE neg_flag				CVT_flags2,7		; =1: result is negative
+;---- Miscellaneous Flags
+#DEFINE ignore_last_edited_gas	misc_flags,0		; =1: ignore last edited gas while cleaning up gas/dil list
+#DEFINE copying_dil				misc_flags,1		; =1: copying a diluent
+#DEFINE comm_service_enabled	misc_flags,2		; =1: COMM service mode is enabled
+;								misc_flags,3		; --- unused
+;								misc_flags,4		; --- unused
+;								misc_flags,5		; --- unused
+;								misc_flags,6		; --- unused
+;								misc_flags,7		; --- unused
+;---- HUD Status Byte (stored in access RAM)
 #DEFINE hud_connection_ok		hud_status_byte,0	; =1 HUD connection ok
 ;								hud_status_byte,1	; =1 HUD is calibrated
-;								hud_status_byte,2	; =1 HUD battery is low (<3000mV)
+;								hud_status_byte,2	; =1 HUD battery is low (< 3000 mV)
 #DEFINE sensor1_active			hud_status_byte,3	; =1: sensor 1 is active
 #DEFINE sensor2_active			hud_status_byte,4	; =1: sensor 2 is active
 #DEFINE sensor3_active			hud_status_byte,5	; =1: sensor 3 is active
 ;								hud_status_byte,6	; --- unused in stand-alone HUD
 ;								hud_status_byte,7	; --- unused in stand-alone HUD
-; General Flags
-#DEFINE switch_left				flag1,0				; =1: left  button was pressed
-#DEFINE switch_right			flag1,1				; =1: right button was pressed
-#DEFINE neg_flag				flag1,2				; =1: result is negative, e.g. by sub16 (sub_c = sub_a - sub_b)
-#DEFINE pressure_refresh		flag1,3				; =1: s new pressure/temperature is available
-#DEFINE sleepmode				flag1,4				; =1: in sleep mode
-#DEFINE tft_is_dimming			flag1,5				; =1: the TFT is dimming, ignore light sensor
-#DEFINE display_velocity		flag1,6				; =1: show velocity
-#DEFINE no_sensor_int			flag1,7				; =1: block any further access to pressure sensor
-#DEFINE rs232_receive_overflow	flag2,0				; =1: a RS232 timeout overflow occurred
-#DEFINE stored_gas_changed		flag2,1				; =1: stored Gas changed
-#DEFINE high_altitude_mode		flag2,2				; =1: unit was manually turned on with ambient pressure <880mbar
-#DEFINE FLAG_apnoe_mode			flag2,3				; =1: apnoe mode selected
-#DEFINE restore_deco_data		flag2,4				; =1: restore deco data (After simulation)
-#DEFINE premenu					flag2,5				; =1: pre-menu/dive menu selected
-#DEFINE menubit					flag2,6				;     menu
-#DEFINE simulatormode_active	flag2,7				; =1: simulator mode active, override pressure sensor readings
-#DEFINE divemode_menu			flag3,0				; =1: dive mode menu is shown
-#DEFINE onesecupdate			flag3,1				; =1: set any new second
-#DEFINE onesectoggle			flag3,2				;     used for phasing every-2-seconds tasks
-#DEFINE toggle_customview		flag3,3				; =1: next customview
-#DEFINE oneminupdate			flag3,4				; =1: set any new minute
-#DEFINE divemode				flag3,5				; =1: in dive mode
-#DEFINE battery_is_36v			flag3,6				; =1: a 3.6 Volt battery is in use
-#DEFINE message_warning			flag3,7				; =1: a warning is active in dive mode or surface mode
-#DEFINE better_gas_available	flag4,0				; =1: a better gas is available
-#DEFINE blinking_better_gas		flag4,1				; =1: gas is blinking
-#DEFINE menuview				flag4,2				; =1: a menu view is shown in dive mode (e.g. "Menu?")
-#DEFINE quarter_second_update	flag4,3				; =1: a new 1/4 second has begun
-#DEFINE divemode_gaschange		flag4,4				; =1: the gas will change very soon
-#DEFINE decostop_active			flag4,5				; =1: decompression stop shown
-#DEFINE depth_greater_100m		flag4,6				; =1: current depth > 100 meters
-#DEFINE realdive				flag4,7				; =1: a real dive during dive mode
-#DEFINE dive_warning_displayed	flag5,0				; =1: the warning sign is shown
-#DEFINE reset_average_depth		flag5,1				; =1: reset the average depth
-#DEFINE store_sample			flag5,2				; =1: store a new sample
-#DEFINE divemode2				flag5,3				; =1: dive longer than one minute
-#DEFINE FLAG_active_descent		flag5,4				;     used in apnoe mode
-#DEFINE event_occured			flag5,5				; =1: an event occurred, store it!
-#DEFINE divemode_menu_active	flag5,6				; =1: the dive mode menu is shown
-#DEFINE temp_changed			flag5,7				; =1: the temperature changed
-#DEFINE gas6_changed			flag6,0				; =1: gas 6 has been selected/changed underwater
-#DEFINE onehourupdate			flag6,1				; =1: a new hour has just begun
-#DEFINE settime_setdate			flag6,2				; =1: in the Set Time or Set Date Menu
-#DEFINE setpoint_changed		flag6,3				; =1: setpoint has been changed
-#DEFINE second_row_warning		flag6,4				; =1: the second row contains a warning
-#DEFINE FLAG_ccr_mode			flag6,5				; =1: CCR mode (fixed ppO2 or sensor) active
-#DEFINE FLAG_back_to_loop		flag6,6				; =1: a switchback from bailout to loop occurred
-#DEFINE FLAG_set_marker			flag6,7				; =1: set a marker in the logbook
-#DEFINE better_gas_hint			flag7,0				; =1: mark a gas in yellow when it is a better gas
-#DEFINE no_more_divesecs		flag7,1				; =1: do no longer show seconds in dive mode
-#DEFINE FLAG_gauge_mode			flag7,2				; =1: in Gauge mode
-#DEFINE ignore_last_edited_gas	flag7,3				;     used in gaslist_cleanup_list
-#DEFINE FLAG_diluent_setup		flag7,4				; =1: setting up Diluents ("Gas6-10")
-IFDEF _rx_functions
-#DEFINE FLAG_pairing_mode		flag7,5				; =1: in transmitter-to-tank pairing menu
-ENDIF
-#DEFINE short_gas_decriptions	flag7,6				; =1: use short versions of gaslist_strcat_gas_cd and gaslist_strcat_setpoint
-#DEFINE max_depth_greater_100m	flag7,7				; =1: max. depth > 100 meters
-#DEFINE FLAG_bailout_mode		flag8,0				; =1: in bailout mode
-#DEFINE is_bailout_menu			flag8,1				; =1: in bailout menu
-#DEFINE toggle_gf				flag8,2				; =1: toggle GF/aGF
-#DEFINE use_agf					flag8,3				; =1: use aGF (instead of GF)
-#DEFINE battery_removed_in_usb	flag8,4				; =1: the battery has been removed in USB (probably not used for anything useful)
-#DEFINE adc_running				flag8,5				; =1: the ADC is in use
-#DEFINE comm_service_enabled	flag8,6				; =1: COMM Service mode unlocked
-#DEFINE compass_enabled			flag8,7				; =1: the compass and accelerometer chip is active
-#DEFINE compass_fast_mode		flag9,0				; =1: the compass is in fast mode
-#DEFINE in_color_menu			flag9,1				; =1: in the color scheme menu
-#DEFINE bailoutgas_event		flag9,2				; =1: bailout was selected or a gas change during bailout
-#DEFINE win_invert				flag9,3				; =1: invert font output
-#DEFINE show_safety_stop		flag9,4				; =1: show the safety stop
-#DEFINE safety_stop_active		flag9,5				; =1: the safety stop is currently displayed
-#DEFINE new_s8_data_available	flag9,6				; =1: new data frame received
-#DEFINE print_compass_label		flag9,7				; =1: print the graphical compass label
-#DEFINE s8_digital				flag10,0			; =1: digital I/O
-#DEFINE menu_update_sensor_mv	flag10,1			; =1: update mV data in calibration menu
-#DEFINE use_O2_sensor1			flag10,2			; =1: use this sensor
-#DEFINE use_O2_sensor2			flag10,3			; =1: use this sensor
-#DEFINE use_O2_sensor3			flag10,4			; =1: use this sensor
-#DEFINE setpoint_fallback		flag10,5			; =1: fall-back to SP1 due to external O2 sensor failure
-IFDEF _screendump
-#DEFINE enable_screen_dumps		flag10,6			; =1: ignore vin_usb, wait for "l" command (screen dump)
-ELSE
-#DEFINE disable_comm_mode		flag10,6			; =1: ignore vin_usb
-ENDIF
-#DEFINE flip_screen				flag10,7			; =1: screen is flipped by 180�
-; flag11,* are not cleared on (re-)start
-#DEFINE sensor1_calibrated_ok	flag11,0			; =1: this sensor has been calibrated ok
-#DEFINE sensor2_calibrated_ok	flag11,1			; =1: this sensor has been calibrated ok
-#DEFINE sensor3_calibrated_ok	flag11,2			; =1: this sensor has been calibrated ok
-#DEFINE voting_logic_sensor1	flag11,3			; =1: this sensor is within the voting logic threshold
-#DEFINE voting_logic_sensor2	flag11,4			; =1: this sensor is within the voting logic threshold
-#DEFINE voting_logic_sensor3	flag11,5			; =1: this sensor is within the voting logic threshold
-#DEFINE cc_active				flag11,6			; =1: constant current active (cR hardware)
-#DEFINE cv_active				flag11,7			; =1: constant voltage active (cR hardware)
-#DEFINE neg_flag_velocity		flag12,0			;     neg_flag backup for velocity logic
-#DEFINE compass_bearing_eq		flag12,1			; =1: bearing is in direction, do not show << or >>
-#DEFINE compass_bearing_lft		flag12,2			; =1: bearing is to the left/<<, =0: to the right/>>
-#DEFINE compass_bearing_vis		flag12,3			; =1: bearing is visible (either ahead or behind/-180�)
-#DEFINE compass_bearing_ahd		flag12,4			; =1: bearing is ahead,   =0: behind
-#DEFINE blinking_depth_warning	flag12,5			; =1: warning color, set by the color_depth
-#DEFINE blinking_depth_prev		flag12,6			; =1: prev display had warning color, set by the TFT_depth
-#DEFINE blinking_depth_toggle	flag12,7			;     toggle controlling blinking
-; flag13,* are not cleared on (re-)start
-#DEFINE compass_bearing_set		flag13,0			; =1: compass bearing is set
-#DEFINE analog_sw1_pressed		flag13,1			; =1: analog switch 1 pressed
-#DEFINE analog_sw2_pressed		flag13,2			; =1: analog switch 2 pressed
-#DEFINE sp2_switched			flag13,3			; =1: this setpoint has been auto-selected already
-#DEFINE sp3_switched			flag13,4			; =1: this setpoint has been auto-selected already
-#DEFINE sp4_switched			flag13,5			; =1: this setpoint has been auto-selected already
-#DEFINE sp5_switched			flag13,6			; =1: this setpoint has been auto-selected already
-#DEFINE use_old_batt_flag		flag13,7			; =1: load old battery information after power-on reset
-#DEFINE FLAG_pscr_mode			flag14,0			; =1: OSTC is in pSCR mode
-#DEFINE deep_sleep				flag14,1			; =1: OSTC is in deep sleep (ignore buttons, etc)
-#DEFINE sensors_agree			flag14,2			; =1: the ppO2 of all sensors are within the threshold range
-#DEFINE gas_needs_attention		flag14,3			; =1: the gas needs attention      has been raised before
-#DEFINE gas_needs_warning		flag14,4			; =1: the gas needs warning        has been raised before
-#DEFINE sensor_warning			flag14,5			; =1: the sensors disagree warning has been raised before
-#DEFINE alternative_divelayout	flag14,6			; =1: the alternative dive layout is used (aka "blind mode")
-#DEFINE i2c_error_flag			flag14,7			; =1: an I2C error occurred
-#DEFINE better_dil_available	flag15,0			; =1: a better diluent is available
-#DEFINE blinking_better_dil		flag15,1			; =1: diluent is blinking
-#DEFINE FLAG_oc_mode			flag15,2			; =1: OC mode active
-#DEFINE message_attention		flag15,3			; =1: an attention is active in divem ode or surface mode
-#DEFINE message_advice			flag15,4			; =1: an advice    is active in divem ode
-#DEFINE blinking_depth_attention flag15,5			; =1: attention color, set by the color_depth
-#DEFINE aux_flag				flag15,6			;     provided for local boolean storage
-#DEFINE FLAG_tr_enabled			flag15,7			; =1: TR (pressure transmitter) functions enabled
-IFDEF _cave_mode
-#DEFINE FLAG_cave_mode			flag16,0			; =1: in cave mode
-#DEFINE FLAG_cave_mode_shutdown	flag16,1			; =1: cave mode has shut down due to bracktrack memory full
-#DEFINE FLAG_dive_turned		flag16,2			; =1: dive is turned
-#DEFINE toggle_turn_dive		flag16,3			; =1: toggle dive turned status
-#DEFINE gas_needs_mode_last		flag16,4			; =1: last reported gas needs where computed in cave mode
-ENDIF
-IFDEF _rx_functions
-#DEFINE menu_update_tank_pres	flag16,5			; =1: update tank pressure data in menu mode
-ENDIF
-#DEFINE redraw_custview_mask	flag16,6			; =1: request to redraw the custom view mask
-;								flag16,7			; --- unused
-IFDEF _rx_functions
-#DEFINE transmitter1_lost		flag17,0			; =1: transmitter 1 lost               is an old message
-#DEFINE transmitter1_battery	flag17,1			; =1: transmitter 1 battery low        is an old message
-#DEFINE transmitter1_pres_warn	flag17,2			; =1: transmitter 1 pressure warning   is an old message
-#DEFINE transmitter1_pres_att	flag17,3			; =1: transmitter 1 pressure attention is an old message
-#DEFINE transmitter2_lost		flag17,4			; =1: transmitter 2 lost               is an old message
-#DEFINE transmitter2_battery	flag17,5			; =1: transmitter 2 battery low        is an old message
-#DEFINE transmitter2_pres_warn	flag17,6			; =1: transmitter 2 pressure warning   is an old message
-#DEFINE transmitter2_pres_att	flag17,7			; =1: transmitter 2 pressure attention is an old message
-ENDIF
-#DEFINE	battery_overtemp	flag18,0			; =1: The battery was charged and temp was too high (Only cleared on Reset)
-; Low-Level Display Control
-#DEFINE aa_antialias			aa_flags,0			;     used by aa_wordprocessor
-#DEFINE aa_color_quart			aa_flags,1			;     used by aa_wordprocessor
-#DEFINE aa_color_half			aa_flags,2			;     used by aa_wordprocessor
-#DEFINE use_custom_colors		aa_flags,3			; =1: override default pixel colors, used by color_image
-;								aa_flags,4			; --- unused
-;								aa_flags,5			; --- unused
-;								aa_flags,6			; --- unused
-;								aa_flags,7			; --- unused
-; Display Update Flags in Dive Mode
-#DEFINE FLAG_TFT_divemode_mask				tft_update_flags+0,0	; =1: update the display
-#DEFINE FLAG_TFT_display_ndl_mask			tft_update_flags+0,1	; =1: update the display
-#DEFINE FLAG_TFT_depth						tft_update_flags+0,2	; =1: update the display
-#DEFINE FLAG_TFT_divemins					tft_update_flags+0,3	; =1: update the display
-#DEFINE FLAG_TFT_show_safety_stop			tft_update_flags+0,4	; =1: update the display
-#DEFINE FLAG_TFT_display_ndl				tft_update_flags+0,5	; =1: update the display
-#DEFINE FLAG_TFT_display_deko_mask			tft_update_flags+0,6	; =1: update the display
-#DEFINE FLAG_TFT_display_deko				tft_update_flags+0,7	; =1: update the display
-#DEFINE FLAG_TFT_display_tts				tft_update_flags+1,0	; =1: update the display
-#DEFINE FLAG_TFT_temp_divemode				tft_update_flags+1,1	; =1: update the display
-#DEFINE FLAG_TFT_divemode_warning			tft_update_flags+1,2	; =1: update the display
-#DEFINE FLAG_TFT_divemode_warning_clear		tft_update_flags+1,3	; =1: update the display
-#DEFINE FLAG_TFT_active_gas_divemode		tft_update_flags+1,4	; =1: update the display
-#DEFINE FLAG_TFT_clear_safety_stop			tft_update_flags+1,5	; =1: update the display
-#DEFINE FLAG_TFT_max_depth					tft_update_flags+1,6	; =1: update the display
-#DEFINE FLAG_TFT_divemode_mask_alt			tft_update_flags+1,7	; =1: update the display
-#DEFINE FLAG_TFT_dive_warning_text_clear	tft_update_flags+2,0	; =1: update the display
-#DEFINE FLAG_TFT_dive_warning_text_clr2		tft_update_flags+2,1	; =1: update the display
-#DEFINE FLAG_TFT_big_deco_alt				tft_update_flags+2,2	; =1: update the display
-#DEFINE FLAG_TFT_display_ndl_or_deko		tft_update_flags+2,3	; =1: update the display
-;											tft_update_flags+2,4	; unused
-;											tft_update_flags+2,5	; unused
-;											tft_update_flags+2,6	; unused
-;											tft_update_flags+2,7	; unused
 ;---------------------------- Macros ------------------------------------
-TSTOSS	macro opt_reg		; TeST Option Skip if not Zero
+TSTOSS	macro opt_reg				; TeST Option Skip next instruction if Set (not zero)
-	movff	opt_reg,WREG	; Attention: destroys WREG!
+	movff	opt_reg,WREG			; Attention: destroys WREG!
-	tstfsz	WREG,A			; Attention: the following command must be a
+	tstfsz	WREG,A					; Attention: must be followed by a plain machine
-	bra		$+4				;            plain machine command, do not let
+	bra		$+4						;            command, do not let follow a macro!
-	endm					;            follow a macro!
+	endm							;
+TSTOSC	macro opt_reg				; TeST Option Skip next instruction if Clear (zero)
+	movff	opt_reg,WREG			; Attention: destroys WREG!
+	tstfsz	WREG,A					; Attention: must be followed by a plain machine
+	endm							;            command, do not let follow a macro!
+CLRI	macro int					; CLeaR Integer (version of clrf for 2 byte integers)
+	clrf	int+0					; Attention: must be in bank where target variable resides!
+	clrf	int+1					;
+	endm							;
+SETI	macro int					; SET Integer (version of setf for 2 byte integers)
+	setf	int+0					; Attention: must be in bank where target variable resides!
+	setf	int+1					;
+	endm							;
+MOVLI	macro lit, int				; MOVe Literal to Integer
+	movlw	LOW  (lit)				; Attention: destroys WREG!
+	movwf	int+0					; Attention: must be in bank where target variable resides!
+	movlw	HIGH (lit)				;
+	movwf	int+1					;
+	endm							;
+INCI	macro int					; INCrement Integer (version of incf for 2 byte integers)
+	infsnz	int+0,F					; Attention: must be in bank where target variable resides!
+	incf	int+1,F					;
+	endm							;
+DECI	macro int					; DECrement Integer (version of decf for 2 byte integers)
+	movlw	.1						; Attention: destroys WREG!
+	subwf	int+0,F					; Attention: must be in bank where target variable resides!
+	movlw	.0						;
+	subwfb	int+1,F					;
+	endm							;
+ADDLI	macro lit, int				; ADD Literal to Integer
+	movlw	LOW  (lit)				; Attention: destroys WREG!
+	addwf	int+0,F					; Attention: must be in bank where target variable resides!
+	movlw	HIGH (lit)				;
+	addwfc	int+1,F					;
+	endm							;
+SUBLI	macro lit, int				; SUBtract Literal from Integer
+	movlw	LOW  (lit)				; Attention: destroys WREG!
+	subwf	int+0,F					; Attention: must be in bank where target variable resides!
+	movlw	HIGH (lit)				;
+	subwfb	int+1,F					;
+	endm							;
+MOVII	macro from, to				; MOVe Integer to Integer (version of movff for 2 byte integers)
+	movff	from+0,to+0				; banksafe
+	movff	from+1,to+1				;
+	endm							;
+SMOVII	macro from, to				; isr-Safe MOVe 2 byte Integer to Integer (version of MOVII for integers updated in ISR)
+	local	retry					;
+retry:
+	bcf		trigger_isr_updates		; clear flag, it will be set by the ISR in case it had kicked in
+	movff	from+0,to+0				; copy low  byte
+	movff	from+1,to+1				; copy high byte
+	btfsc	trigger_isr_updates		; did the ISR kicked in since we cleared the flag?
+	bra		retry					; YES - retry copy
+	endm							; NO  - done
+SMOVTT	macro from, to				; isr-Safe MOVe Three byte integer to integer (version of MOVII for integers updated in ISR)
+	local	retry					;
+retry:
+	bcf		trigger_isr_updates		; clear flag, it will be set by the ISR in case it had kicked in
+	movff	from+0,to+0				; copy low   byte
+	movff	from+1,to+1				; copy high  byte
+	movff	from+2,to+2				; copy upper byte
+	btfsc	trigger_isr_updates		; did the ISR kicked in since we cleared the flag?
+	bra		retry					; YES - retry copy
+	endm							; NO  - done
+SMOVFF	macro from, to				; isr-Safe MOVe Four byte integer to integer (version of MOVII for integers updated in ISR)
+	local	retry					;
+retry:
+	bcf		trigger_isr_updates		; clear flag, it will be set by the ISR in case it had kicked in
+	movff	from+0,to+0				; copy byte 0 (LSB)
+	movff	from+1,to+1				; copy byte 1
+	movff	from+2,to+2				; copy byte 2
+	movff	from+3,to+3				; copy byte 3 (MSB)
+	btfsc	trigger_isr_updates		; did the ISR kicked in since we cleared the flag?
+	bra		retry					; YES - retry copy
+	endm							; NO  - done
+SMOVSS	macro from, to				; isr-Safe MOVe Six byte integer to integer (version of MOVII for integers updated in ISR)
+	local	retry					;
+retry:
+	bcf		trigger_isr_updates		; clear flag, it will be set by the ISR in case it had kicked in
+	movff	from+0,to+0				; copy byte 0 (LSB)
+	movff	from+1,to+1				; copy byte 1
+	movff	from+2,to+2				; copy byte 2
+	movff	from+3,to+3				; copy byte 3
+	movff	from+4,to+4				; copy byte 4
+	movff	from+5,to+5				; copy byte 5 (MSB)
+	btfsc	trigger_isr_updates		; did the ISR kicked in since we cleared the flag?
+	bra		retry					; YES - retry copy
+	endm							; NO  - done
 ;---------------------------- C-Code Routines ----------------------------
 	extern	deco_calc_desaturation_time
 	extern	deco_calc_hauptroutine
 	extern	deco_calc_dive_interval
 	extern	deco_calc_dive_interval_1min
 	extern	deco_calc_dive_interval_10min
 	extern	deco_clear_tissue
+	extern	deco_init_output_vars
 	extern	deco_pull_tissues_from_vault
 	extern	deco_push_tissues_to_vault
-;---------------------------- Bank0 DATA ------------------------------------
+;---------------------------- Bank0 ACCESS RAM ------------------------------
-isr_backup	equ			0x60
-isr_backup	udata_ovr	isr_backup			; reserved space for interrupt data
+; Variables located in the Access Bank are declared in hwos.asm
+ifndef ACCESS_RAM_VARS
+	extern	HW_descriptor
+	extern	HW_variants
+	extern	HW_flags_state
+	extern	OS_flags_persist
+	extern	OS_flags_ISR1
+	extern	OS_flags_ISR2
+	extern	OM_flags_mode
+	extern	DM_flags_deco
+	extern	cpu_speed_request
+	extern	cpu_speed_state
+	extern	timebase
+	extern	eventbase
+	extern	isr_timeout_timer
+	extern	isr_timeout_reload
+	extern	total_divetime_secs
+	extern	counted_divetime_mins
+	extern	counted_divetime_secs
+	extern	apnoe_surface_secs
+	extern	apnoe_surface_mins
+	extern	apnoe_dive_secs
+	extern	apnoe_dive_mins
+	extern	sampling_rate
+	extern	sampling_timer
+	extern	simulatormode_depth
+	extern	hud_status_byte
+	extern	hud_battery_mv
+endif
+;---------------------------- Bank0 NORMAL RAM ------------------------------
+isr_backup	equ			0x060		; Alias for "banksel isr_backup"
+isr_backup	udata_ovr	isr_backup	; Bank 0 ISR data
 ;---- Backup for general Registers
-isr_prod						res 2
+PROD_backup						res 2
+FSR0_backup						res 2
-;---- MS5541 Subroutines
+BSR_backup						res 1
-amb_pressure					res 2
-temperature						res 2
+;---- Multi-Purpose Register for ISR Routines
+isr_mpr							res 2		; used in ms5541.asm and isr.asm
+#DEFINE isr_lo					isr_mpr+0	;
+#DEFINE isr_hi					isr_mpr+1	;
+;---- Time and Date - Real Time Clock
+rtc_year						res 1		; running year     | Attention:
+rtc_month						res 1		; running month    | do not change
+rtc_day							res 1		; running day      | the Position of
+rtc_hour						res 1		; running hour     | these Variables
+rtc_mins						res 1		; running minute   | relative to
+rtc_secs						res 1		; running second   | each other!
+rtc_latched_year				res 1		; latched year     | Attention:
+rtc_latched_month				res 1		; latched month    | do not change
+rtc_latched_day					res 1		; latched day      | the Position of
+rtc_latched_hour				res 1		; latched hour     | these Variables
+rtc_latched_mins				res 1		; latched minute   | relative to
+rtc_latched_secs				res 1		; latched second   | each other!
+;--- RTC-independent Timebase
+timebase_mins					res 1		; RTC-independent timer for generating the every hour   trigger
+timebase_secs					res 1		; RTC-independent timer for generating the every minute trigger
+;---- other Timers
+uptime							res 4		; [sec] uptime of the OSTC since last cold start
+lastdive_time					res 4		; [sec] time since last dive
+surface_interval				res 2		; [min] surface interval
+simulator_time					res 1		; [min] real runtime of the simulator
+;---- Data for Pressure and Temperature Calculation (MS5541)
+clock_count						res 1		; I2C clock pulse counter
+sensor_state_counter			res 1		; counter for pressure sensor state machine
+dLSB							res 1		; pressure sensor interface, LSB
+dMSB							res 1		; pressure sensor interface, MSB
+dbuffer							res 1		; pressure sensor interface, RX/TX buffer
 C1								res 2		; decoded calibration data
-C2								res 2
+C2								res 2		; decoded calibration data
-C3								res 2
+C3								res 2		; decoded calibration data
-C4								res 2		; here: C4-250
+C4								res 2		; decoded calibration data, here C4-250
-C5								res 2		; here: Reference Temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760)
+C5								res 2		; decoded calibration data, here reference temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760)
-C6								res 2
+C6								res 2		; decoded calibration data
 D1								res 2		; raw pressure
 D2								res 2		; raw temperature
 xdT								res 2
 xdT2							res 2
 OFF								res 2
 SENS							res 2
-dLSB							res 1		; pressure sensor interface
-dMSB							res 1
+temperature_cur					res 2		; current  temperature
-clock_count						res 1
+temperature_min					res 2		; minimum  temperature (operated by divemode.asm)
-sensor_state_counter			res 1		; counts to eight for state machine
+temperature_avg					res 2		; internal register used for averaging
-amb_pressure_avg				res 2
+temperature_last				res 2		; internal register used for detecting changes
-temperature_avg					res 2
-minimum_temperature				res 2		; minimum temperature
+pressure_abs					res 2		; current  absolute pressure
-last_temperature				res 2
+pressure_abs_avg				res 2		; internal register used for averaging
-;last_pressure					res 2
+pressure_abs_last				res 2		; internal register used for detecting pressure changes
-last_pressure_velocity			res 2		; for velocity
-last_surfpressure				res 2
+pressure_abs_sampled			res 2		; sampled   surface pressure, sampled in sleep mode every 15 minutes
-last_surfpressure_15min			res 2
+pressure_abs_ref				res 2		; reference surface pressure, surface pressure sampled    15 minutes ago
-last_surfpressure_30min			res 2
+pressure_surf					res 2		; surface pressure used by ISR to calculate relative pressures
-rel_pressure					res 2
-sim_pressure					res 2		; hold simulated pressure in mbar if in Simulator mode
+pressure_rel_cur				res 2		; current relative pressure
-max_pressure					res 2
+pressure_rel_max				res 2		; maximum relative pressure
-avg_rel_pressure				res 2
+pressure_rel_sim				res 2		; simulated relative pressure (simulator mode)
-avg_rel_pressure_total			res 2
 ;---- Data for ISR Math Subroutines
-isr_xC							res 4
+isr_xA							res 2		; multiplicand 1
-isr_xA							res 2
+isr_xB							res 2		; multiplicand 2
-isr_xB							res 2
+isr_xC							res 4		; resulting product
-;---- Data for ISR Routines
-isr1_temp						res 1		; ISR temp variable, used in ms5541.asm, isr_rtcc, isr_battery_gauge
-isr2_temp						res 1		; ISR temp variable, used isr_battery_gauge
 ;---- Display Brightness
+ambient_light					res 2		; ambient light level
 max_CCPR1L						res 1		; max. brightness value for CCPR1L
 ;---- Battery Gauge (nAs, nC)
 battery_gauge					res 6		; 48 bit -> 78 Ah max
 ;---- IR/S8-Link
-ir_s8_buffer					res .18		; temporally used in get_calibration_data for the raw (packed) calibration data
+ir_s8_buffer					res .18		; buffer for data received on IR/S8 interface,
+											; also used to buffer MS5541 raw calibration data
+IFDEF _external_sensor
 ir_s8_counter					res 1
 ir_s8_timeout					res 1		; timeout for valid data
+ENDIF
-;---- Compass raw Data
-compass_DX						res 2
+;---- raw O2 Sensor Data received on S8 Link
-compass_DY						res 2
+IFDEF _external_sensor
-compass_DZ						res 2
+s8_rawdata_sensor1				res 3		; 24 bit A/D raw data from S8 HUD sensor 1
+s8_rawdata_sensor2				res 3		; 24 bit A/D raw data from S8 HUD sensor 2
-accel_DX						res 2
+s8_rawdata_sensor3				res 3		; 24 bit A/D raw data from S8 HUD sensor 3
-accel_DY						res 2
+ENDIF
-accel_DZ						res 2
+;---- Switch Processing (8 byte, called by ISR and sleep mode)
-;---- Compass filtered Data
+analog_sw1_raw					res 2		; idle values (average)
-compass_DX_f					res 2
+analog_sw2_raw					res 2		; idle values (average)
-compass_DY_f					res 2
+analog_counter					res 1		; for averaging
-compass_DZ_f					res 2
+analog_sw1						res 1		; analog value for switch 1
+analog_sw2						res 1		; analog value for switch 2
-accel_DX_f						res 2
+button_polarity					res 1		; 0xFF (both normal), 0x00 (both inverted), 0x01 (left inverted only), 0x02 (right inverted only)
-accel_DY_f						res 2
-accel_DZ_f						res 2
+;--- resettable min and max Depth Option
+IFDEF _min_depth_option
-;---- Compass Calibration Data
+pressure_rel_min_trip			res 2		; resettable minimum relative pressure
-compass_CX_f					res 2
+pressure_rel_max_trip			res 2		; resettable maximum relative pressure
-compass_CY_f					res 2
+ENDIF
-compass_CZ_f					res 2
+; 141 byte used, 19 byte free
-;---- Compass more Data
-compass_heading					res 2		; corrected heading (in 1�) : -180 .. 180
-compass_heading_old				res 2		; old heading (For smoother display)
+;---------------------------- Common DATA ------------------------------------
-compass_heading_shown			res 2		; displayed heading
+common		equ			0x100		; Alias for "banksel common"
-;compass_roll					res 2		; rotation around the X axis
+common		udata_ovr	common		; Bank 1 general variables
-;compass_pitch					res 2		; rotation around the Y axis
-compass_a						res 2		; tmp data for Q15 arithmetics
+;---- Multi-Purpose Register for Data Storage and Interface with Conversion and Display Functions (6 byte)
-compass_b						res 2
+mpr								res 6		; will be used as base address of 1, 2, 3, 4 and 6 byte buffers
-compass_r						res 3
+#DEFINE lo						mpr+0		; nickname for "low"
+#DEFINE hi						mpr+1		; nickname for "high"
-;---- Data for Logging
+#DEFINE up						mpr+2		; nickname for "upper"
+#DEFINE ex						mpr+3		; nickname for "extra"
+#DEFINE ul						mpr+4		; nickname for "ultra"
+#DEFINE hy						mpr+5		; nickname for "hyper"
+;---- Flags - Menu System (2 byte)
+MS_flags_control				res 1		; menu system - control
+MS_flags_imprint				res 1		; menu system - data imprinting
+;---- Flags - Dive Mode (7 byte)
+DM_flags_state					res 1		; dive mode - dive states
+DM_flags_sensor					res 1		; dive mode - O2 sensors
+DM_flags_request				res 1		; dive mode - user requests
+DM_flags_event					res 1		; dive mode - data recording events
+DM_flags_layout1				res 1		; dive mode - display control / layout (1)
+DM_flags_layout2				res 1		; dive mode - display control / layout (2)
+DM_flags_message				res 1		; dive mode - display control / messages
+DM_flags_gas_dil				res 1		; dive mode - display control / gas, diluent
+;---- Miscellaneous Flags (1 byte)
+misc_flags						res 1
+;---- Interface to numerical Display Functions (1 byte)
+ignore_digits					res 1
+;---- Interface to Graphic Functions (12 byte)
+win_leftx2						res 1
+win_top							res 1
+win_width						res 2
+win_height						res 1
+win_bargraph					res 1		; width of the bargraph bar
+win_color1						res 1		; 2 byte color
+win_color2						res 1		; 2 byte color
+win_color3						res 1		; 3 byte color used for display 2
+win_color4						res 1		; 3 byte color used for display 2
+win_color5						res 1		; 3 byte color used for display 2
+win_font						res 1		; font size selector
+;---- Interface to Math Functions (16 byte)
+divA							res 2
+xA								res 2
+xB								res 2
+xC								res 4
+sub_a							res 2
+sub_b							res 2
+sub_c							res 2
+;---- Menu System and Views (4 byte)
+menu_pos_cur					res 1		; current position in main menu
+menu_pos_max					res 1		; highest position in main menu
+active_premenu					res 1		; currently shown pre-menu (0: none)
+active_customview				res 1		; currently shown custom view
+;---- Miscellaneous (6 byte)
+batt_voltage					res 2		; battery voltage in mV (no ISR involved)
+batt_percent					res 1		; battery in percent (1-100%)
+message_counter					res 1		; counts amount of messages
+message_page					res 1		; current message page number
+pairing_slot					res 1		; slot number, used in transmitter pairing
+;---- Dive Mode / all modes (25 byte)
+divesecs_avg_trip				res 2		; time accumulator for the resettable average depth & stopwatch
+divesecs_avg_total				res 2		; time accumulator for the total dive average depth
+pressure_rel_avg_trip			res 2		; calculated resettable average depth
+pressure_rel_avg_total			res 2		; calculated total dive average depth
+pressure_rel_cur_cached			res 2		; cached current relative pressure
+pressure_rel_max_cached			res 2		; cached maximum relative pressure
+pressure_abs_cached				res 2		; cached current absolute pressure
+pressure_abs_10					res 2		; cached current absolute pressure divided by 10
+depth_meter						res 1		; current depth in meters
+safety_stop_countdown			res 1		; counter for safety stop
+dive_timeout_timer				res 2		; timeout timer for leaving dive mode after surfacing
+gaslist_gas						res 1		; used for transfer between gaslist.asm and menu_tree.asm
+best_gas_number					res 1		; number of the "best gas": 0= none found, 1-5= gases 1-5, 255= not computed
+active_gas						res 1		; the currently used OC/bailout gas (1-5)
+IFDEF _ccr_pscr
+best_dil_number					res 1		; number of the "best dil": 0= none found, 1-5= dils  1-5, 255= not computed
+active_dil						res 1		; the currently used diluent (1-5)
+ENDIF
+;---- Dive Mode / apnoe mode (2 byte)
+apnoe_max_pressure				res 2		; max depth over all dives in the series
+;---- Gas 6 Data (2 byte)
+gas6_O2_ratio					res 1		; gas 6 O2 ratio
+IFDEF _helium
+gas6_He_ratio					res 1		; gas 6 He ratio
+ENDIF
+;---- Profile Recording (6 byte)
+alarm_type						res 1		;
+event_byte1						res 1		;
+event_byte2						res 1		;
 CNS_start						res 2		; CNS value at beginning of dive
-GF_start						res 1		; GF  value at beginning of dive
+;---- External Flash (13 byte)
-;---- CPU mode
+ext_flash_rw					res 1		; transfer register for data read / write
-cpu_speed_request				res 1		; requested CPU speed: =1: eco, =2: normal, =3: fastest
+ext_flash_address				res 3		; 24 bit address
-cpu_speed_state					res 1		; current   CPU speed: =1: eco, =2: normal, =3: fastest
+ext_flash_log_pointer			res 3		; 24 bit address for logbook profile storing
+ext_flash_end_pointer			res 3		; 24 bit address for logbook profile storing
-;---- Data for graphical Compass
+ext_flash_dive_counter			res 3		; 24 bit counter for dive length (increased in write_byte_ext_flash_plus)
+;---- Battery Management (12 byte)
+battery_capacity_internal		res 2		; for internal battery gauging
+battery_capacity				res 2		; for battery gauge IC
+battery_offset					res 2		; for battery gauge IC
+battery_type					res 1		; =0:1.5V, =1:3.6V Saft, =2:LiIon 3.7V/0.8Ah, =3:LiIon 3.7V/3.1Ah, =4: LiIon 3.7V/2.3Ah
+battery_accumulated_charge		res 2		; raw values in battery gauge IC
+battery_temperature				res 2		; battery temperature in 0.1 Kelvin
+gauge_status_byte				res 1		; gauge IC status byte
+;========================= private Variables ===================================
+;        do not access from outside of the respective source files!
+;---- aa_wordprocessor.asm and strings.asm
+AA_flags						res 1		; various flags for aa_wordprocessor and strings
+aa_bitlen						res 1		; count of pixels when decoding bitmaps
+aa_start						res 2		; PROM pointer to start of encoded bitmap
+aa_end							res 2		; and end of it
+aa_temp							res 2		; current color, divided by 2 or 4
+;--- adc_lightsensor.asm
+get_bat_volt_counter			res 1		; counter for reading the charger chip
+;---- convert.asm
+CVT_flags1						res 1
+CVT_flags2						res 1
+cvt_temp1						res 1
+cvt_temp2						res 1
+cvt_temp3						res 1
+cvt_temp4						res 1
+cvt_temp_lo						res 1
+cvt_temp_hi						res 1
+;---- color_processor.asm
+overall_pixels					res 3		; used by color_processor.asm
+pixel_count						res 2		; used by color_processor.asm
+encoding_format					res 1		; image encoding format
+;---- compass_ops.asm
+compass_flags					res 1		; flags are defined in compass_ops.asm
+;---- comm.asm
+comm_timeout_timer				res 1		; timeout for communication
+;---- eeprom_rs232.asm
+uart_timeout_timer				res 3		; RS232 receive timeout counter
+;---- i2c.asm
+i2c_temp1						res 1		; temporary data
+i2c_temp2						res 1		; temporary data
+;---- math.asm
+math_loop						res 1		; loop counter
+;---- menu_processor.asm
+menustack_pointer				res 1		; pointer to menu stack
+menu_flags						res 1		; flags for menu entries
+menu_item						res 1		; index of the current item
+start_item						res 1		; index of the first item (scrolling)
+item_max						res 1		; number of items in menu
+selected_item					res 1		; index of the current item
+value_type						res 1		; type for vertical menu
+dynamic_item					res 3		; callback address
+menu_block						res 3		; address of the menu block (i.e. item 0)
+menu_title						res 3		; text or procedure for dynamic menu
+menu_center						res 1		; centering for line menu
+proc_item						res 3		; address of the current procedure
+text_item						res 2		; address of the current text
+;---- options.asm
+opt_type						res 1		; option type
+opt_default						res 1		; default value
+opt_inc							res 1		; also used for default+1 (string) and enum low
+opt_min							res 1		; minimum value, also used for enum high
+opt_max							res 1		; maximum value
+opt_unit						res 2		; multi-lingual unit text
+opt_eeprom						res 1		; storage position in EEPROM
+opt_backup_tbl					res 3		; buffer for table pointer
+;---- tft.asm
+tft_save_top					res 1
+tft_save_height					res 1
+tft_save_left					res 1
+tft_save_width					res 1
+tft_temp1						res 1
+tft_temp2						res 1
+tft_temp3						res 1
+tft_temp4						res 1
+;---- dump screen Function
+IFDEF _screendump
+ds_line							res 1		; current line (0..239)
+ds_column						res 1		; current columnx2 (0..159)
+ds_pixel						res 2		; current pixel color
+ds_count						res 1		; repetition count
+ENDIF
+;---- wait.asm
+wait_counter					res 1
+; 193 byte used, 15 byte free (208 byte total)
+;============================ LOCAL DATA ======================================
+; Space for various overlayed local data from top-level applications,
+; i.e. applications that never run in parallel to each other
+;
+; --------------------- local Data Users --------------------------------------
+;
+;					-------------- Applications using ----------------------
+;	Mode			local1				local2				local3
+; -----------------------------------------------------------------------------
+;	sleepmode		sleepmode.asm		(unused)			(unused)
+;	surfmode		surfmode.asm*		(unused)			(unused)
+;	simulator		simulator.asm		(unused)			(unused)
+;	divemode		divemode.asm		divemode.asm		ghostwriter.asm
+;	logbook			logbook.asm			logbook.asm			logbook.asm
+;
+; * assigned to this slot, but currently no local memory used
+local1			equ			0x1D0	; Alias for CBLOCK directive
+local1			udata_ovr	0x1D0	; Bank1 shared local space
+				res			0x10	; 16 Byte (0x1D0 ... 0x1DF)
+local2			equ			0x1E0	; Alias for CBLOCK directive
+local2			udata_ovr	0x1E0	; Bank1 shared local space
+				res			0x10	; 16 Byte (0x1E0 ... 0x1EF)
+local3			equ			0x1F0	; Alias for CBLOCK directive
+local3			udata_ovr	0x1F0	; Bank1 shared local space
+				res			0x10	; 16 Byte (0x1F0 ... 0x1FF)
+;---------------------------- Common2 DATA ------------------------------------
+common2		equ			0xA00		; Alias for "banksel common2"
+common2		udata_ovr	common2		; Bank 10 general variables
+;---- Data for Logging (6 byte), sampled in divemode.asm and used in ghostwriter.asm
+start_year						res 1		; year                                    | ATTENTION:
+start_month						res 1		; month                                   | do not change the
+start_day						res 1		; day                                     | position of these
+start_hour						res 1		; hour                                    | variables relative
+start_mins						res 1		; minute                                  | to each other!
+start_secs						res 1		; second, not used, for code commonality  |
+supersat_start					res 1		; leading tissue supersaturation at beginning of the dive
+;---- Backup for lost Gas Function (10 byte)
+opt_gas_type_backup				res 5		; 0=Disabled, 1=First, 2=Travel, 3=Deco   | ATTENTION:
+opt_dil_type_backup				res 5		; 0=Disabled, 1=First, 2=Normal           | (as above)
+;---- O2 Sensors (9 byte, updated by ISR when sensors are connected via datalink)
+IFDEF _external_sensor
+sensor1_mv						res 2		; sensor 1 voltage in 0.1  mV  steps
+sensor2_mv						res 2		; sensor 2 voltage in 0.1  mV  steps
+sensor3_mv						res 2		; sensor 3 voltage in 0.1  mV  steps
+sensor1_ppO2					res 1		; sensor 1 ppO2    in 0.01 bar steps
+sensor2_ppO2					res 1		; sensor 2 ppO2    in 0.01 bar steps
+sensor3_ppO2					res 1		; sensor 3 ppO2    in 0.01 bar steps
+ENDIF
+;---- last Dive Statistics (7 byte)
+lastdive_duration				res 3		; byte 0= minutes, low byte, 1= minutes, high byte, 2= seconds
+lastdive_maxdepth				res 2		; in mbar
+lastdive_avgdepth				res 2		; in mbar
+;---- Backup of last shown Custom View (2 byte)
+customview_surfmode				res 1		; storage to remember last selected custom view in surface mode
+customview_divemode				res 1		; storage to remember last selected custom view in dive mode
+;---- Miscellaneous (0 byte)
+;old_velocity					res 4		; stores the last 4 speeds (8 seconds) in m/min
+;---- Menu Processor (8 byte)
+menustack						res 8		; menu stack
+;---- Graphical Compass (17 byte)
 xRD								res 2		; virtual compass ruler offset
 xRDr							res 2		; virtual compass ruler offset - right end
 xRD180							res 2		; virtual compass ruler offset for the -180 marker
 xLO								res 1		; lo backup to prevent trashing
 xHI								res 1		; hi backup to prevent trashing
 xCM								res 1		; compass bearing relative position
-compass_bearing					res 2		; this is where the bearing menu stores the actual heading for bearing
+compass_heading_new				res 2		; corrected heading (in 1�) : -180 .. 180
+compass_heading_old				res 2		; old heading (for smoother display)
-;---------------------------- Common DATA ------------------------------------
+compass_heading_shown			res 2		; displayed heading
-common		equ			0x100	; Alias for "banksel common"
+compass_bearing					res 2		; displayed bearing
-common		udata_ovr	common	; Bank 1 general variables
+;---- Compass Arithmetics (30 byte)
-;---- Time and Date
+compass_DX						res 2		; raw data
-secs							res 1
+compass_DY						res 2		; raw data
-mins							res 1
+compass_DZ						res 2		; raw data
-hours							res 1
+accel_DX						res 2		; raw data
-day								res 1
+accel_DY						res 2		; raw data
-month							res 1
+accel_DZ						res 2		; raw data
-year							res 1
+compass_DX_f					res 2		; filtered Data
-surface_interval				res 2
+compass_DY_f					res 2		; filtered Data
+compass_DZ_f					res 2		; filtered Data
-;---- State Information
+accel_DX_f						res 2		; filtered Data
-flag1							res 1
+accel_DY_f						res 2		; filtered Data
-flag2							res 1
+accel_DZ_f						res 2		; filtered Data
-flag3							res 1
+compass_CX_f					res 2		; calibration data
-flag4							res 1
+compass_CY_f					res 2		; calibration data
-flag5							res 1
+compass_CZ_f					res 2		; calibration data
-flag6							res 1
-flag7							res 1
+;---- temporary Data for Q15 Arithmetics (7 byte, compass_ops.asm, called from C)
-flag8							res 1
+compass_a						res 2		;
-flag9							res 1
+compass_b						res 2		;
-flag10							res 1
+compass_r						res 3		;
-flag11							res 1
-flag12							res 1
+;---- Data Exchange with TR Co-Processor (50 byte)
-flag13							res 1
+IFDEF _rx_functions
-flag14							res 1
+rx_buffer						res .48		; Buffer for RX data (slots 0-7)
-flag15							res 1
+rx_firmware_cur_major			res 1		; TR module current firmware, major
-flag16							res 1
+rx_firmware_cur_minor			res 1		; TR module current firmware, minor
-flag17							res 1
-flag18							res 1
-hardware_flag1					res 1		; hardware descriptor flags 1
-hardware_flag2					res 1		; hardware descriptor flags 2
-tft_update_flags				res 3
-;---- Interface to Data Conversion &
-;---- Output Functions, as well as
-;---- General-Purpose Temp Storage
-lo								res 1		; nickname for "low"    | Attention: do not change the
-hi								res 1		; nickname for "high"   | relative positioning of these
-up								res 1		; nickname for "upper"  | variables, lo will also be used
-ex								res 1		; nickname for "extra"  | as base address for a 8, 16 and
-ul								res 1		; nickname for "ultra"  | 32 bit buffer
-ignore_digits					res 1
-;---- Interface to Graphic Functions
-win_leftx2						res 1
-win_top							res 1
-win_width						res 2
-win_height						res 1
-win_bargraph					res 1
-win_color1						res 1
-win_color2						res 1
-win_color3						res 1	    ; For Display 2
-win_color4						res 1	    ; For Display 2
-win_color5						res 1	    ; For Display 2
-win_font						res 1
-;---- Interface to Math Functions
-divA							res 2
-xC								res 4
-xA								res 2
-xB								res 2
-sub_c							res 2
-sub_a							res 2
-sub_b							res 2
-math_loop						res 1		; internal variable used for loops
-;---- Misc.
-timeout_counter1				res 2		; timeout for dive operations
-timeout_counter2				res 1		; timeout for menu operations
-batt_voltage					res 2		; battery voltage in mV
-batt_percent					res 1		; battery in percent (1-100)
-message_counter					res 1		; counts amount of messages
-message_page					res 1		; current # of message page
-pairing_slot					res 1		; slot number, used in transmitter pairing
-;---- Dive Mode / General
-divemins						res 2
-divesecs						res 1
-total_divetime_seconds			res 2
-average_divesecs				res 2		; time accumulator for the resettable stopwatch / average depth
-average_divesecs_total			res 2		; time accumulator for the total average depth
-curr_depth						res 1		; current depth in meters
-amb_press_10					res 2		; ambient pressure divided by 10
-safety_stop_countdown			res 1		; counts seconds of safety stop
-gaslist_gas						res 1		; used for transfer between gaslist.asm and menu_tree.asm
-best_gas_number					res 1		; number of the "best gas": 0= none found, 1-5= gases 1-5, 255= not computed
-best_dil_number					res 1		; number of the "best dil": 0= none found, 1-5= dils  1-5, 255= not computed
-active_gas						res 1		; the currently used OC/bailout gas (1-5)
-active_dil						res 1		; the currently used diluent (1-5)
-;---- Dive Mode / Apnoe
-apnoe_surface_mins				res 1
-apnoe_surface_secs				res 1
-apnoe_mins						res 1
-apnoe_secs						res 1
-apnoe_max_pressure				res 2
-;---- Profile Recording
-samplingrate					res 1
-samplesecs						res 1
-samplesecs_value				res 1
-AlarmType						res 1
-EventByte1						res 1
-EventByte2						res 1
-;---- External Flash
-ext_flash_rw					res 1		; transfer register for data read / write
-ext_flash_address				res 3		; 24 bit address
-ext_flash_log_pointer			res 3		; 24 bit address for logbook profile storing
-ext_flash_end_pointer			res 3		; 24 bit address for logbook profile storing
-ext_flash_dive_counter			res 3		; 24 bit counter for dive length (increased in write_byte_ext_flash_plus)
-;---- O2 Sensor Data
-o2_mv_sensor1					res 2		; in 0.1mV steps
-o2_mv_sensor2					res 2		; in 0.1mV steps
-o2_mv_sensor3					res 2		; in 0.1mV steps
-o2_ppo2_sensor1					res 1		; sensor 1 ppO2 (in 0.01 bar steps)
-o2_ppo2_sensor2					res 1		; sensor 2 ppO2 (in 0.01 bar steps)
-o2_ppo2_sensor3					res 1		; sensor 3 ppO2 (in 0.01 bar steps)
-hud_status_byte					res 1
-;========================= private Variables ===================================
-;        do not access from outside of the respective source files!
-;---- aa_wordprocessor.asm
-aa_flags						res 1		; various flags for aa_wordprocessor
-aa_bitlen						res 1		; count of pixels when decoding bitmaps
-aa_start						res 2		; PROM ptr to start of encoded bitmap
-aa_end							res 2		; and end of it
-aa_temp							res 2		; current color, divided by 2 or 4
-;--- adc_lightsensor.asm
-get_bat_volt_counter			res 1		; counter for 10x reading the charger chip
-;---- convert.asm
-cvt_flags						res 2
-cvt_temp1						res 1
-cvt_temp2						res 1
-cvt_temp3						res 1
-cvt_temp4						res 1
-lo_temp							res 1
-hi_temp							res 1
-;---- color_processor.asm
-img_pixels						res 3		; used by color_processor.asm
-img_count						res 2		; used by color_processor.asm
-;---- comm.asm
-comm_timeout					res 1		; timeout for communication
-;---- eeprom_rs232.asm
-uart1_temp						res 1
-uart2_temp						res 1
-uart3_temp						res 1
-;---- i2c.asm
-i2c_temp1						res 1		; temporary data
-i2c_temp2						res 1		; temporary data
-;---- menu_processor.asm
-menupos1						res 1		; logbook and dive mode menu
-menupos2						res 1		; used for dive mode simulator and pre-menu
-menupos3						res 1		; used for custom views
-menupos4						res 1		; used for dive mode menu
-menu_flags						res 1		; flags for menu entries
-menu_item						res 1		; index of the current item
-start_item						res 1		; index of the first item (scrolling)
-item_max						res 1		; number of items in menu
-selected_item					res 1		; index of the current item
-value_type						res 1		; type for vertical menu
-dynamic_item					res 3		; callback addr
-menu_block						res 3		; address of the menu block (i.e. item 0)
-menu_title						res 3		; text or proc for dynamic menu
-menu_center						res 1		; centering for line menu
-proc_item						res 3		; address of the current proc
-text_item						res 2		; address of the current text
-;---- options.asm
-opt_type						res 1		;
-opt_default						res 1		;
-opt_inc							res 1		; also used for default+1 (string) and enum low
-opt_min							res 1		; also used for enum high
-opt_max							res 1		;
-opt_unit						res 2		; multi-lingual unit text
-opt_eeprom						res 1		;
-opt_backup_tbl					res 3		; buffer for table pointer
-;---- tft.asm
-save_top						res 1
-save_height						res 1
-save_left						res 1
-save_width						res 1
-tft_temp1						res 1
-tft_temp2						res 1
-tft_temp3						res 1
-tft_temp4						res 1
-IFDEF _screendump
-;---- Screendump Function
-ds_line							res 1		; current line (0..239)     (dump screen function)
-ds_column						res 1		; current columnx2 (0..159) (dump screen function)
-ds_pixel						res 2		; current pixel color       (dump screen function)
-ds_count						res 1		; repetition count          (dump screen function)
 ENDIF
-;---- wait.asm
+;---- SAC Calculation on Pressure Readings 1 & 2 (20 byte)
-wait_counter					res 1
-; ==> 202 bytes used - 6 bytes free
-;============================ LOCAL DATA ======================================
-; Space for various overlayed local data from top-level applications,
-; i.e. applications that never run in parallel to each other
-;
-; --------------------- local Data Users --------------------------------------
-;					-------------- Applications using -------------
-;	Mode			local1				local2				local3
-; -----------------------------------------------------------------------------
-;	sleepmode		sleepmode.asm		(unused)			(unused)
-;	surfmode		surfmode.asm*		(unused)			(unused)
-;	simulator		simulator.asm		(unused)			(unused)
-;	divemode		divemode.asm		divemode.asm		ghostwriter.asm
-;	logbook			logboock.asm		logbook.asm			logbook.asm
-;
-; * assigned to this slot, but currently no local memory used
-local1			equ			0x1D0	; Alias for CBLOCK directive
-local1			udata_ovr	0x1D0	; Bank1 shared local space
-				res			0x10	; 16 Byte (0x1D0 ... 0x1DF)
-local2			equ			0x1E0	; Alias for CBLOCK directive
-local2			udata_ovr	0x1E0	; Bank1 shared local space
-				res			0x10	; 16 Byte (0x1E0 ... 0x1EF)
-local3			equ			0x1F0	; Alias for CBLOCK directive
-local3			udata_ovr	0x1F0	; Bank1 shared local space
-				res			0x10	; 16 Byte (0x1F0 ... 0x1FF)
-;---------------------------- Common2 DATA ------------------------------------
-common2		equ			0xA00	; Alias for "banksel common2"
-common2		udata_ovr	common2	; Bank 10 general variables
-s8_rawdata_sensor1				res 3		; 24 bit A/D raw data from S8 HUD sensor 1
-s8_rawdata_sensor2				res 3		; 24 bit A/D raw data from S8 HUD sensor 2
-s8_rawdata_sensor3				res 3		; 24 bit A/D raw data from S8 HUD sensor 3
-hud_battery_mv					res 2		; hud/ppo2 monitor battery voltage in mV
-start_year						res 1		; at start of dive (for logbook)          | ATTENTION: do not change the position of these
-start_month						res 1		; at start of dive (for logbook)          |            variables relative to each other!
-start_day						res 1		; at start of dive (for logbook)          |
-start_hours						res 1		; at start of dive (for logbook)          |
-start_mins						res 1		; at start of dive (for logbook)          |
-opt_gas_type_backup				res 5		; 0=Disabled, 1=First, 2=Travel, 3=Deco   | ATTENTION: do not change the position of these
-opt_dil_type_backup				res 5		; 0=Disabled, 1=First, 2=Normal           |            arrays relative to each other!
-internal_battery_capacity		res 2		; For internal battery gauging
-battery_capacity				res 2		; For battery gauge IC
-battery_offset					res 2		; For battery gauge IC
-battery_type					res 1		; =0:1.5V, =1:3.6V Saft, =2:LiIon 3.7V/0.8Ah, =3:LiIon 3.7V/3.1Ah, =4: LiIon 3.7V/2.3Ah
-battery_acumulated_charge		res 2		; Raw values in battery gauge IC
-gauge_status_byte				res 1		; Gauge IC status byte
-battery_temperature			res 2		; in 0.1�C
-analog_sw1_raw					res 2		; idle values (average)
-analog_sw2_raw					res 2		; idle values (average)
-analog_counter					res 1		; for averaging
-analog_sw1						res 1		; analog value for switch 1
-analog_sw2						res 1		; analog value for switch 2
-button_polarity					res 1		; 0xFF (both normal), 0x00 (both inverted), 0x01 (left inverted only), 0x02 (right inverted only)
-uptime							res 4		; Uptime [s]
-lastdive_time					res 4		; Time since last dive [s]
-lastdive_duration				res 3		; mins:2 and secs
-lastdive_maxdepth				res 2		; in mbar
-customview_surfmode				res 1		; storage to remember last selected custom view in surface mode
-customview_divemode				res 1		; storage to remember last selected custom view in dive mode
-ambient_light					res 2		; ambient_light level
-old_velocity					res 4		; stores the last 4 speeds (8 seconds) in m/min
-menustack						res 5		; menu stack from menu_processor.asm
-gas6_O2_ratio					res 1		; gas6 O2 ratio
-gas6_He_ratio					res 1		; gas6 He ratio
-gas6_temp						res 1		; temp used in divemenu_tree.asm
 IFDEF _rx_functions
-; Data exchange
-rx_buffer						res .48		; Buffer for RX data (slots 0-7)
-rx_firmware						res 2		; RX firmware version xx.yy
-; Variables for SAC Calculation on Pressure Readings 1 & 2
 pres_accu_1st					res 4		; accumulator for pressure drop    in 1/160 bar  | ATTENTION: do not
 pres_accu_2nd					res 4		; accumulator for pressure drop    in 1/160 bar  |            change the
 time_accu_1st					res 1		; accumulator for reading ages     in seconds    |            position
 gas__last_1st					res 1		; last gas assignment                            |            of these
 time_accu_2nd					res 1		; accumulator for reading ages     in seconds    |            variables
 pres_last_2nd					res 2		; last pressure reading pressure   in 1/160 bar  |            other!
 time_last_1st					res 2		; last pressure reading time       in seconds    |
 time_last_2nd					res 2		; last pressure reading time       in seconds    |
 ENDIF
-; ==> 138 bytes used - 118 bytes free
+; 166 byte used, 90 byte free
 ;----------------------- Bank 2 General Purpose Buffer -------------------------
 ; Reserved for general purpose buffer (strings, images, etc).
 ; NOTE: Needs to be aligned with a bank (LOW(buffer)==0).
 buffer							res	.256	; used for string assembly / display output
 ;---------------------- Bank 14 Options Table ---------------------------------
-opt_table	equ			0xE00
+opt_table	equ			0xE00		; Alias for "banksel opt_table"
-opt_table	udata_ovr	opt_table
+opt_table	udata_ovr	opt_table	; Bank 14 options table
-;---- Dive Options
+;---- Gas and Diluent Settings
 opt_gas_O2_ratio				res 5		; O2 ratios of OC/bailout gases                              | ATTENTION:
 opt_dil_O2_ratio				res 5		; O2 ratios of diluents                                      | keep relative
 opt_gas_He_ratio				res 5		; He ratios of OC/bailout gases                              | positioning of
 opt_dil_He_ratio				res 5		; He ratios of diluents                                      | all arrays in
 opt_gas_type					res 5		; OC/bailout gas type: O=Disabled, 1=First, 2=Travel, 3=Deco | this block!
 opt_dil_type					res 5		;            dil type: 0=Disabled, 1=First, 2=Normal         |
 opt_gas_change					res 5		; change depths for OC/Bailout gases                         |
 opt_dil_change					res 5		; change depths for diluents                                 |
-opt_dive_mode					res 1		; main dive/deco mode: =0: OC, =1: CC, =2: Gauge, =3: Apnea, =4: pSCR
+;---- Setpoints
-opt_ccr_mode					res 1		; CCR/pSCR sub   mode: =0: fixed/calculated SP, =1: sensor, =2: auto SP
+opt_setpoint_cbar				res 5		; setpoints in cbar                        | ATTENTION: keep relative positioning
+opt_setpoint_change				res 5		; change depth for the setpoints in meter  |            of these two arrays!
-;---- Managing Settings
+;---- Dive Mode Settings
+opt_dive_mode					res 1		; main dive/deco mode: =0: OC, =1: CC, =2: Gauge, =3: Apnea,  =4: pSCR
+opt_ccr_mode					res 1		; CCR/pSCR sub   mode: =0: fixed/calculated SP,   =1: Sensor, =2: Auto SP
+;---- custom Text
+#DEFINE opt_name_length			.60			; custom text string 5 rows with 12 chars
+opt_name						res opt_name_length
+;---- various other Settings
+opt_surface_interval			res 1		; surface interval, used by deco calculator
 opt_brightness					res 1		; =0: Eco, =1:Medium, =2:Full
 opt_salinity					res 1		; 0-5%
-#DEFINE opt_name_length			.60			; custom text string 5 rows with 12 chars
-opt_name						res opt_name_length
 opt_language					res 1		; current language: 0=EN, 1=DE, 2=FR, 3=SP
 opt_units						res 1		; 0:m/�C, 1:ft/�F
 opt_dateformat					res 1		; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD
 opt_last_stop					res 1		; =3:3m, =4:4m, =5:5m, =6:6m
 opt_aGF_high					res 1		; alternative GF HIGH
 opt_x_s1						res 2		; calibration factor (Not stored in EEPROM)
 opt_x_s2						res 2		; calibration factor (Not stored in EEPROM)
 opt_x_s3						res 2		; calibration factor (Not stored in EEPROM)
 opt_sensor_fallback				res 1		; NOT USED ANY MORE, KEPT FOR COMPATIBILITY WITH EEPROM IMAGE
 opt_flip_screen					res 1		; =1: flip the screen
-opt_cR_button_left				res 1		; left button sensitivity (cR hardware)
+opt_cR_button_left				res 1		; left button  sensitivity (cR hardware)
 opt_cR_button_right				res 1		; right button sensitivity (cR hardware)
 opt_modwarning					res 1		; =1:do a red blinking warning, =0:default behavior
 opt_vsitextv2					res 1		; =1:use the depth dependent ascend rate limits
 opt_vsigraph					res 1		; =1:draw the graphical VSI bar
 opt_showppo2					res 1		; =1:always show the ppO2 value in the warning position
 opt_sat_multiplier_non_gf		res 1		; Buhlmann safety factor for NON-GF deco
 opt_desat_multiplier_non_gf		res 1		; Buhlmann safety factor for NON-GF deco
 opt_ZfactorUse					res 1		; =1: figure in compression factor Z when converting gas volume <-> gas pressure
 opt_ZfactorTemp					res 1		; temperature setpoint for compression factor Z
 opt_2ndDepthDisp				res 1		; =1: show average depth instead of max depth
+opt_max_depth					res 1		; depth at which a warning will be given
-; RX functions - no conditional compilation because used in options_table
+opt_store_apnoe_dive			res 1		; =1: store dives in apnoe mode into logbook
+opt_tissue_graphics				res 1		; =0: show N2 and He pressures, =1: show pressures and saturations
+opt_logoffset_step				res 1		; step size when adjusting log offset
+opt_layout						res 1		; initial layout of dive mode screen
+opt_extended_stops				res 1		; =1: place gas switches also below 1st stop depth
+;---- RX Function Settings
 opt_transmitter_id_1			res 2		; 16 bit transmitter ID for Gas 1
 opt_transmitter_id_2			res 2		; 16 bit transmitter ID for Gas 2
 opt_transmitter_id_3			res 2		; 16 bit transmitter ID for Gas 3
 opt_transmitter_id_4			res 2		; 16 bit transmitter ID for Gas 4
 opt_transmitter_id_5			res 2		; 16 bit transmitter ID for Gas 5
 opt_TR_mode						res 1		; TR functions - mode
 opt_TR_1st_pres					res 1		; TR functions - 1st pressure assignment
 opt_TR_2nd_pres					res 1		; TR functions - 2nd pressure assignment
 opt_TR_Bail_pres				res 1		; TR functions - bailout pressure assignment
-; ==> 173 bytes used - 85 bytes free
+; ==> 187 bytes used - 57 bytes free (244 usable bytes only in bank 14 as the upper 12
+;                                     bytes may be used for SFRs on some PIC devices)
 ;-----------------------------------------------------------------------------

Mercurial > public > hwos_code

comparison src/hwos.inc @ 623:c40025d8e750