Mercurial > public > hwos_code

comparison src/ostc3.inc @ 0:11d4fc797f74

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
init
author heinrichsweikamp
date Wed, 24 Apr 2013 19:22:45 +0200
parents
children ab8a7c3f1db0
comparison
equal deleted inserted replaced
-1:000000000000 0:11d4fc797f74
1 ;=============================================================================
2 ;
3 ; File ostc3.asm
4 ;
5 ; OSTC3 Platform definitions
6 ;
7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved.
8 ;=============================================================================
9 ; HISTORY
10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code.
11
12 ;=============================================================================
13
14 LIST P=18F87K22 ; change also: Configure->SelectDevice from Mplab
15
16 ;#DEFINE __DEBUG
17
18 #include <p18f87k22.inc>
19 #include <ports.inc> ; Portmap
20
21 #DEFINE softwareversion_x d'0' ; Software version XX.YY
22 #DEFINE softwareversion_y d'90' ; Software version XX.YY
23 #DEFINE softwareversion_beta 0 ; (and 0 for release)
24
25 #DEFINE comm_service_key 0xABCDEF
26
27 ;-----------------------------------------------------------------------------
28
29 #DEFINE CCP1CON_VALUE b'00001100' ; PWM1 for LED dimming
30 #DEFINE T2CON_ECO b'00000100' ; 1:1 Postscaler, 1:1 Prescaler, Timer 2 start -> 980Hz (Good compromise of no-flicker and efficiency)
31 #DEFINE T2CON_NORMAL b'00001110'
32 #DEFINE T2CON_FASTEST b'00001110' ; 1:2 Postscaler, 1:16 Prescaler, Timer 2 start -> 1960Hz (no-flicker)
33
34 ; Timing for button hold-down flags
35 #DEFINE TMR1H_VALUE_FIRST .255-.128 ; in steps of 7,8125ms -> 1s
36 #DEFINE TMR1H_VALUE_CONT .255-.32 ; in steps of 7,8125ms -> 0.25s
37 #DEFINE TMR1H_VALUE_CONT_DIVE .255-.64 ; in steps of 7,8125ms -> 0.5s
38
39 ; Color Definitions: 8Bit RGB b'RRRGGGBB'
40 #DEFINE color_red b'11100000' ; (7,0,0)
41 #DEFINE color_dark_red b'10000101' ; (4,1,1)
42 #DEFINE color_violet b'11101011' ; (7,2,3)
43 #DEFINE color_blue b'11000111' ; (6,1,3)
44 #DEFINE color_green b'00011100' ; (0,7,0)
45 #DEFINE color_greenish b'00111110' ; (1,7,2)
46 #DEFINE color_dark_green b'00111001' ; (1,6,1)
47 #DEFINE color_yellow b'11111101' ; (7,7,1)
48 #DEFINE color_white b'11111111' ; (7,7,3)
49 #DEFINE color_black b'00000000' ; (0,0,0)
50 #DEFINE color_deepblue b'00000010' ; (0,0,2)
51 #DEFINE color_grey b'11011111' ; (6,7,3)
52 #DEFINE color_cyan b'11011111' ; (6,7,3)
53 #DEFINE color_lightblue b'11011011' ; (6,7,3)
54 #DEFINE color_orange b'11111000' ; (7,6,0)
55 #DEFINE color_pink b'11111010' ; (7,6,2)
56
57 #DEFINE FT_TINY .0
58 #DEFINE FT_SMALL .1
59 #DEFINE FT_MEDIUM .2
60 #DEFINE FT_LARGE .3
61
62 #DEFINE warn_depth .1
63 #DEFINE warn_cns .2
64 #DEFINE warn_gf .3
65 #DEFINE warn_ppo2 .4
66 #DEFINE warn_velocity .5
67 #DEFINE warn_ceiling .6
68 #DEFINE warn_gas_in_gaslist .7
69 #DEFINE warn_ppo2_hud .8
70 #DEFINE warn_battery .9
71
72
73 ; Profile recording parameters
74 #DEFINE logbook_profile_version 0x23
75 #DEFINE samplingrate .10 ; [seconds]
76 #DEFINE samplingrate_apnoe .1 ; [seconds]
77 ; Warning: Divisors must be <.16 !
78 #DEFINE div_temperature .6 ; x samplingrate [s]
79 #DEFINE div_deco .6 ; x samplingrate [s]
80 #DEFINE div_gf .12 ; x samplingrate [s]
81 #DEFINE div_ppo2_sensors .2 ; x samplingrate [s]
82 #DEFINE div_decoplan .12 ; x samplingrate [s]
83 #DEFINE div_cns .12 ; x samplingrate [s]
84 #DEFINE div_tank .0 ; x samplingrate [s]
85 ; Warning: Information lengths must be <.16 !
86 #DEFINE infolength_temperature .2 ; [byte]
87 #DEFINE infolength_deco .2 ; [byte]
88 #DEFINE infolength_gf .1 ; [byte]
89 #DEFINE infolength_ppo2_sensors .9 ; [byte]
90 #DEFINE infolength_decoplan .15 ; [byte]
91 #DEFINE infolength_cns .2 ; [byte]
92 #DEFINE infolength_tank .0 ; [byte]
93
94 ; "Better Gas" behavior
95 ; better_gas_window <= minimum_change_depth !
96 ; minimum_change_depth >=5 !
97 #DEFINE minimum_change_depth .3 ; [m]
98 #DEFINE better_gas_window .3 ; [m]
99
100 ; Dive mode limits and thresholds
101 #DEFINE start_dive_threshold .100 ; [cm]
102 #DEFINE high_altitude_dive_threshold .300;[cm]
103 #DEFINE apnoe_timeout .30 ; [min]
104 #DEFINE divemode_menuview_timeout .10 ; [s]
105 #DEFINE divemode_timeout .300 ; [s]
106 #DEFINE divemode_menu_timeout .30 ; [s]
107 #DEFINE ppo2_warning_low .19 ; [cbar] (Default value)
108 #DEFINE ppo2_lowest_setting .16 ; [cbar] (Minimum value)
109 #DEFINE ppo2_display_high .120 ; [cbar]
110 #DEFINE ppo2_warning_high .160 ; [cbar] (Default value)
111 #DEFINE ppo2_highest_setting .160 ; [cbar] (Max. Value)
112 #DEFINE cns_display_high .70 ; [%]
113 #DEFINE cns_warning_high .100 ; [%]
114 #DEFINE gf_display_high .75 ; [%]
115 #DEFINE gf_warning_high .100 ; [%]
116 #DEFINE depth_warn_mbar .13000 ; [mbar]
117 #DEFINE wake_up_from_sleep .1160 ; [mbar]
118 #DEFINE gf_display_threshold .20 ; [%]
119 #DEFINE simulator_start_depth .2500 ; [mbar] + 1000mbar surface
120 #DEFINE simulator_timeout .15 ; [s]
121
122
123 ; Surface mode limits and thresholds
124 #DEFINE cns_display_surface_high .70 ; [%]
125 #DEFINE high_altitude_threshold .880 ; [mbar]
126 #DEFINE max_surfpressure .1080 ; [mbar]
127 #DEFINE timeout_surfacemode .90 ; [s]
128
129
130 ; Decomodel paramters
131 #DEFINE no_fly_time_ratio .60 ; [%]
132 #DEFINE deco_distance .10 ; [dm]
133
134
135 ; Color-code parameters for the divemode
136 #DEFINE color_code_cns_high .100 ; [%]
137 #DEFINE color_code_gf_warn_high .101 ; [%]
138 #DEFINE color_code_velocity_warn_high .10;[m/min]
139
140 ; Velocity threshold
141 #DEFINE velocity_warning_level_1 .7 ; [m/min]
142
143 ; Battery thresholds
144 #DEFINE lithium_36v_empty .3050 ; [mV] Saft 3,6V LS14500 AA - threshold for battery percent display
145 #DEFINE lithium_36v_low .2000 ; [mV] (Must be bigger then aa_15v_high!)
146 #DEFINE aa_15v_high .1550 ; [mV] Energizer 1,5V E2 AA
147 #DEFINE aa_15v_low .1100 ; [mV] According to Energizer Datasheet EBC-4201R, Page 2
148 #DEFINE color_code_battery_low .15 ; [%]
149 #DEFINE battery_show_level .30 ; [%]
150
151 #DEFINE current_sleepmode .62
152 #DEFINE current_backlight_multi .115 ; *CCPR1L+current_backlight_offset
153 #DEFINE current_backlight_offset .216
154 #DEFINE current_speed_eco .1914
155 #DEFINE current_speed_normal .4027
156 #DEFINE current_speed_fastest .5050
157 #DEFINE current_ir_reciever .139
158 #DEFINE current_compass .28
159
160 ; Brightness thresholds (between zero (off) and 255 (max. power))
161 #DEFINE ambient_light_max_high_36V .220 ; When used with a 3,6V battery
162 #DEFINE ambient_light_max_high .170
163 #DEFINE ambient_light_min_high .40
164 #DEFINE ambient_light_max_medium .155
165 #DEFINE ambient_light_min_medium .30
166 #DEFINE ambient_light_max_eco .120
167 #DEFINE ambient_light_min_eco .20
168
169 ; IR Link timeout
170 #DEFINE ir_timeout_value .48 ; multiples of 62,5ms
171
172 ; Gaslist hard-coded limits
173 #DEFINE gaslist_min_o2 .7 ; Minimum O2 [%]
174 #DEFINE gaslist_max_change_depth .100 ; Max. change depth [m]
175 #DEFINE gaslist_sp_stepsize .10 ; Steps for Setpoint Setup [cbar]
176 #DEFINE gaslist_sp_max .160 ; Max. Setpoint [cbar]
177 #DEFINE gaslist_sp_min .50 ; Min. Setpoint [cbar]
178
179 ;---------------------------- Macros ------------------------------------
180
181 TSTOSS macro opt_reg ; TeST Option Skip if not Zero
182 movff opt_reg,WREG
183 tstfsz WREG,A
184 bra $+4
185 endm
186
187 ;---------------------------- Bank0 DATA ------------------------------------
188 isr_backup equ 0x60
189 isr_backup udata_ovr isr_backup ; Reserved space for interupt data
190
191 ;---- Backup for general registers
192 isr_prod res 2
193
194 ;---- MS5541 subroutines
195 amb_pressure res 2
196 temperature res 2
197
198 W1 res 2 ; Raw (packed) calibration data
199 W2 res 2
200 W3 res 2
201 W4 res 2 ; 100
202 C1 res 2 ; Decoded calibration data
203 C2 res 2
204 C3 res 2
205 C4 res 2 ; Here: C4-250
206 C5 res 2 ; Here: Reference Temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760)
207 C6 res 2
208 D1 res 2 ; raw pressure
209 D2 res 2 ; raw temperature
210 xdT res 2
211 xdT2 res 2
212 OFF res 2
213 SENS res 2
214 dLSB res 1 ;Pressure sensor interface
215 dMSB res 1
216 clock_count res 1
217 sensor_state_counter res 1 ; counts to eight for state maschine
218 amb_pressure_avg res 2
219 temperature_avg res 2
220 minimum_temperature res 2 ; minimum temperature
221 last_temperature res 2
222 last_pressure res 2
223 last_pressure_velocity res 2 ; For velocity
224 last_surfpressure res 2
225 last_surfpressure_15min res 2
226 last_surfpressure_30min res 2
227 rel_pressure res 2
228 sim_pressure res 2 ; hold simulated pressure in mbar if in Simulator mode
229 max_pressure res 2
230 avr_rel_pressure res 2
231 avr_rel_pressure_total res 2
232 ;---- Data for ISR math subroutines
233 isr_xC res 4
234 isr_xA res 2
235 isr_xB res 2
236
237 ;---- Data for ISR routines
238 isr1_temp res 1 ; ISR temp variable, used in ms5541.asm, isr_rtcc, isr_battery_gauge
239 isr2_temp res 1 ; ISR temp variable, used isr_battery_gauge
240
241 ;---- Display brightness
242 max_CCPR1L res 1 ; Max. brightness value for CCPR1L
243
244 ; Battery gauge (nAs, nC)
245 battery_gauge res 6 ; 48Bit -> 78Ah max...
246
247 ; IR-Link
248 ir_buffer res .16
249 ir_counter res 1
250 ir_timeout res 1 ; Timeout for valid data
251
252 ; Compass raw data
253 compass_DX res 2
254 compass_DY res 2
255 compass_DZ res 2
256
257 accel_DX res 2
258 accel_DY res 2
259 accel_DZ res 2
260
261 ; Compass FILTERED data
262 compass_DX_f res 2
263 compass_DY_f res 2
264 compass_DZ_f res 2
265
266 accel_DX_f res 2
267 accel_DY_f res 2
268 accel_DZ_f res 2
269
270 ; Compass calibration data
271 compass_CX_f res 2
272 compass_CY_f res 2
273 compass_CZ_f res 2
274
275 ; Compass more data
276 compass_heading res 2 ; Corrected heading (in 1°) : -180 .. 180
277 compass_roll res 2 ; Rotation around the X axis
278 compass_pitch res 2 ; Rotation arounf the Y axis
279
280 compass_a res 2 ; Tmp data for Q15 arithmetics
281 compass_b res 2
282 compass_r res 3
283
284 CNS_start res 2 ; CNS value at beginning of dive
285 GF_start res 1 ; GF value at beginning of dive
286
287 ;---------------------------- Common DATA ------------------------------------
288
289 common equ 0x100 ; Alias for "banksel common"
290 common udata_ovr common ; Bank1 general variables
291
292 ;---- Time and Date
293 secs res 1
294 mins res 1
295 hours res 1
296 day res 1
297 month res 1
298 year res 1
299 surface_interval res 2
300
301 flag1 res 1
302 flag2 res 1
303 flag3 res 1
304 flag4 res 1
305 flag5 res 1
306 flag6 res 1
307 flag7 res 1
308 flag8 res 1
309
310 temp1 res 1
311 temp2 res 1
312
313 ;---- Interface to wait macros
314 wait_temp res 1
315 waitms_temp res 1
316
317 ;---- Interface to graphic subroutines (aa_wordprocessor, color_processor, ...)
318 win_leftx2 res 1
319 win_top res 1
320 win_width res 2
321 win_height res 1
322 win_bargraph res 1
323 win_color1 res 1
324 win_color2 res 1
325 win_font res 1
326 win_invert res 1
327
328 ;---- Draw subroutines
329 tft_temp4 res 1
330 tft_temp3 res 1
331 tft_temp2 res 1
332 tft_temp1 res 1
333
334 ;---- data conversion subroutines
335 lo res 1
336 hi res 1
337 up res 1
338
339 ;---- RS232 temp variables
340 uart1_temp res 1
341 uart2_temp res 1
342
343 ;---- Data for math subroutines
344 divA res 2
345 divB res 1
346 xC res 4
347 xA res 2
348 xB res 2
349 sub_c res 2
350 sub_a res 2
351 sub_b res 2
352
353 ;---- Data for conversion subroutines
354 cvt_flags res 1
355 ignore_digits res 1
356
357 #define leftbind cvt_flags,0
358 #define ignore_digit3 cvt_flags,1
359 #define ignore_digit4 cvt_flags,2
360 #define ignore_digit5 cvt_flags,3
361 #DEFINE enable_screen_dumps cvt_flags,4 ; =1: Ignore vin_usb, wait for "l" command (Screen dump)
362
363 ;---- Misc.
364 speed_setting res 1 ; =1: Eco, =2: Normal, =3: Fastest
365 nofly_time res 2 ; No Fly time in Minutes (Calculated after Dive)
366 timeout_counter res 1
367 timeout_counter2 res 1
368 timeout_counter3 res 1
369 batt_voltage res 2 ; Battery voltage in mV
370 batt_percent res 1 ; Battery in percent (1-100)
371 ambient_light res 2 ; ambient_light level
372 lo_temp res 1
373 hi_temp res 1
374 desaturation_time res 2
375 convert_value_temp res 3 ; used in menu_battery_state_convert_date
376 active_gas res 1
377 decoplan_page res 1
378 warning_counter res 1 ; Counts amount of warning in divemode
379 warning_counter_backup res 1 ; Backup of warning_counter
380 warning_page res 1 ; current # of warning page
381 rssi_value res 1 ; Current RSSI level
382
383 ; Remind history for menu processor (and such):
384 menustack res 5 ; menu stack
385 menupos res 1 ; Logbook and divemode menu
386 menupos2 res 1 ; For dive mode simulator and pre-menu
387 menupos3 res 1 ; For Customviews
388 menupos4 res 1 ; For divemode menu
389
390 ; Apnoe stuff that must be in bank common
391 apnoe_mins res 1
392 apnoe_secs res 1
393 apnoe_max_pressure res 2
394
395 ; Divemode
396 divemins res 2
397 divesecs res 1
398 samplesecs_value res 1
399 divisor_temperature res 1
400 divisor_deco res 1
401 divisor_gf res 1
402 divisor_ppo2_sensors res 1
403 divisor_decoplan res 1
404 divisor_cns res 1
405 divisor_tank res 1
406 average_depth_hold res 4
407 average_depth_hold_total res 4
408 total_divetime_seconds res 2
409 average_divesecs res 2 ; For the resettable stopwatch
410 decodata res 2
411 apnoe_timeout_counter res 1
412 apnoe_surface_mins res 1
413 apnoe_surface_secs res 1
414
415
416 ; Profile storing
417 AlarmType res 1
418 samplesecs res 1
419 EventByte res 1
420 ProfileFlagByte res 1
421
422 ; External flash
423 ext_flash_address res 3 ; 24bit Address
424 ext_flash_log_pointer res 3 ; 24bit Address for logbook profile storing
425 ext_flash_dive_counter res 3 ; 24bit Counter for dive length (increased in write_byte_ext_flash_plus)
426
427 ; I2C
428 i2c_temp res 1 ; Temp
429
430 ; MCP
431 mcp_temp res 4 ; For RX
432
433 ; O2 Sensor data
434 o2_mv_sensor1 res 2 ; in 0.1mV steps
435 o2_mv_sensor2 res 2 ; in 0.1mV steps
436 o2_mv_sensor3 res 2 ; in 0.1mV steps
437 o2_ppo2_sensor1 res 1 ; Sensor1 ppO2 (in 0.01bar steps)
438 o2_ppo2_sensor2 res 1 ; Sensor2 ppO2 (in 0.01bar steps)
439 o2_ppo2_sensor3 res 1 ; Sensor3 ppO2 (in 0.01bar steps)
440 hud_battery_mv res 2
441 hud_status_byte res 1
442 ;Status Byte/
443 ;Bit0 = 1 -> HUD connection ok
444 ;Bit1 = 1 -> HUD is calibrated
445 ;Bit2 = 1 -> HUD Battery is low (<3000mV)
446 ;Bit3 = 1 -> Sensor 1 active
447 ;Bit4 = 1 -> Sensor 2 active
448 ;Bit5 = 1 -> Sensor 3 active
449 ;Bit6 unused in stand-alone HUD
450 ;Bit7 unused in stand-alone HUD
451
452 sensor_setpoint res 1 ; sensor ppo2 in 0.01bar for deco routine
453
454 better_gas_number res 1 ; number (1-5) of the "better gas" in divemode, =0: no better gas available
455
456 ;---------------------------- TMP DATA ---------------------------------------
457 ; Space for various overlayed data from color, word, menu processors, etc.
458 ;
459
460 tmp udata_ovr 0x1A0 ; Bank1 shared TMP space
461 tmp equ 0x1A0 ; Alias for CBLOCK directive.
462 res 0x060 ; RESERVED area.
463
464 ;-----------------------------------------------------------------------------
465 ; Reserve BANK2 for general purpose buffer (strings, images, etc).
466 ; NOTE: Needs to be aligned with a bank (LOW(buffer)==0).
467 buffer udata_ovr 0x200
468 buffer res .256
469
470 opt_table equ 0xE00
471 opt_table udata_ovr opt_table
472
473 ;---- Dive Options
474 opt_gas_O2_ratio res 5 ; Needed because deco gaslist use N2
475 opt_dil_O2_ratio res 5 ; Must be in line with opt_gas_O2_ratio
476 opt_gas_He_ratio res 5 ; He ratio Gas1-5
477 opt_dil_He_ratio res 5 ; Must be in line with opt_gas_He_ratio
478 opt_gas_type res 5 ; 0=Disabled, 1=First, 2=Travel, 3=Deco
479 opt_dil_type res 5 ; 0=Disabled, 1=First, 2=Normal
480 opt_dive_mode res 1 ; 0=OC, 1=CC, 2=Gauge, 3=Apnea
481 opt_ppO2_max res 1 ; PPO2 Max for MOD calculation and color coding in divemode
482 opt_ccr_mode res 1 ; =0: Fixed SP, =1: Sensor
483 opt_ppO2_min res 1 ; PPO2 min for Sensors and color coding in divemode
484
485 ;---- Managing Settings
486
487 opt_brightness res 1 ; =0: Eco, =1:Medium, =2:Full
488 opt_salinity res 1 ; 0-5%
489 #DEFINE opt_name_length .60 ; Custom text string 5 rows with 12 chars
490 opt_name res opt_name_length
491 opt_language res 1 ; Current language. 0=EN, 1=DE, 2=FR, 3=SP
492 opt_units res 1 ; 0:m/°C, 1:ft/°F
493 opt_dateformat res 1 ; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD
494 opt_last_stop res 1 ; =3:3m, =4:4m, =5:5m, =6:6m
495 opt_aGF_high res 1 ; Alternative GF HIGH
496 opt_aGF_low res 1 ; Alternative GF LOW
497 opt_GF_high res 1 ; GF HIGH
498 opt_GF_low res 1 ; GF LOW
499 opt_enable_aGF res 1 ; =1: aGF can be selected underwater
500
501 ;-----------------------------EEPROM DATA ------------------------------------
502 ; Automatic reset of all options when this is changed:
503 #define eeprom_opt_serial 0x0005 ; Version 0.5
504
505 ;-----------------------------------------------------------------------------
506 ; Flags
507 #DEFINE switch_left flag1,0
508 #DEFINE switch_right flag1,1
509 #DEFINE neg_flag flag1,2 ; e.g. sub16 (sub_c = sub_a - sub_b)
510 #DEFINE pressure_refresh flag1,3 ; =1: A new pressure/temperature is available
511 #DEFINE sleepmode flag1,4 ; =1: In Sleepmode
512 #DEFINE tft_is_dimming flag1,5 ; =1: The TFT is dimming, ignore light sensor
513 #DEFINE display_velocity flag1,6 ; =1: show velocity
514 #DEFINE no_sensor_int flag1,7 ; =1: block any further access to pressure sensor
515
516 #DEFINE rs232_recieve_overflow flag2,0 ; =1: An RS232 timeout overflow occoured
517 #DEFINE stored_gas_changed flag2,1 ; =1: Stored Gas changed
518 #DEFINE high_altitude_mode flag2,2 ; =1: Unit was manually turned on with ambient pressure <880mbar
519 #DEFINE FLAG_apnoe_mode flag2,3 ; =1: Apnoe mode selected
520 #DEFINE restore_deco_data flag2,4 ; =1: Restore deco data (After simulation)
521 #DEFINE premenu flag2,5 ; =1: Premenu/Divemenu selected
522 #DEFINE menubit flag2,6 ; menu
523 #DEFINE simulatormode_active flag2,7 ; =1: Simulator mode active, override pressure sensor readings
524
525 #DEFINE divemode_menu flag3,0 ; =1: Divemode menu is shown
526 #DEFINE onesecupdate flag3,1 ; =1 after any second
527 #DEFINE twosecupdate flag3,2 ; =1: New two-second update
528 #DEFINE toggle_customview flag3,3 ; =1: Next customview
529 #DEFINE oneminupdate flag3,4 ; =1 after any minute
530 #DEFINE divemode flag3,5 ; =1: in Divemode
531 #DEFINE battery_is_36v flag3,6 ; =1: 3,6V Battery is in use
532 #DEFINE warning_active flag3,7 ; =1: A warning is active in divemode or surfacemode
533
534 #DEFINE better_gas_available flag4,0 ; =1: A better gas is available
535 #DEFINE blinking_better_gas flag4,1 ; =1: Gas is blinking
536 #DEFINE menuview flag4,2 ; =1: A menuview is shown in divemode (e.g. "Menu?")
537 #DEFINE quarter_second_update flag4,3 ; =1: A new 1/4 second has begun
538 #DEFINE divemode_gaschange flag4,4 ; =1: The gas will change very soon
539 #DEFINE decostop_active flag4,5 ; =1: Decompression stop shown
540 #DEFINE depth_greater_100m flag4,6 ; =1: Current Depth > 100m
541 #DEFINE realdive flag4,7 ; =1: A real dive during divemode
542
543 #DEFINE dive_warning_displayed flag5,0 ; =1: The warning sign is shown
544 #DEFINE reset_average_depth flag5,1 ; =1: Reset the average depth
545 #DEFINE store_sample flag5,2 ; =1: Store a new sample
546 #DEFINE divemode2 flag5,3 ; =1: Dive longer then one minute
547 #DEFINE FLAG_active_descent flag5,4 ; Used in Apnoe mode
548 #DEFINE event_occured flag5,5 ; =1: An event occured, store it!
549 #DEFINE divemode_menu_active flag5,6 ; =1: The divemode menu is shown
550 #DEFINE temp_changed flag5,7 ; =1: The temperature changed
551
552 #DEFINE gas6_changed flag6,0 ; =1: Gas 6 has been selected/changed underwater
553 #DEFINE onehourupdate flag6,1 ; =1: A new hour has just begun
554 #DEFINE settime_setdate flag6,2 ; =1: In the Set Time or Set Date Menu
555 #DEFINE setpoint_changed flag6,3 ; =1: Setpoint has been changed
556 #DEFINE second_row_warning flag6,4 ; =1: The second row contains a warning
557 #DEFINE FLAG_ccr_mode flag6,5 ; =1: CCR mode (Fixed ppO2 or Sensor) active
558 #DEFINE dive_hud1_displayed flag6,6 ; =1: The Sensor1 HUD reading is displayed
559 #DEFINE dive_hud2_displayed flag6,7 ; =1: The Sensor2 HUD reading is displayed
560
561 #DEFINE dive_hud3_displayed flag7,0 ; =1: The Sensor3 HUD reading is displayed
562 #DEFINE no_more_divesecs flag7,1 ; =1: Do no longer show seconds in divemode
563 #DEFINE FLAG_gauge_mode flag7,2 ; =1: In Gauge mode
564 #DEFINE ignore_last_edited_gas flag7,3 ; Used in gaslist_cleanup_list
565 #DEFINE ccr_diluent_setup flag7,4 ; =1: Setting up Diluents ("Gas6-10")
566 #DEFINE menu_show_sensors flag7,5 ; =1: Update HUD data in menu
567 #DEFINE short_gas_decriptions flag7,6 ; =1: Use short versions of gaslist_strcat_gas_mod and gaslist_strcat_setpoint
568
569 #DEFINE is_bailout flag8,0 ; =1: Bailout
570 #DEFINE is_bailout_menu flag8,1 ; =1: Bailout
571 #DEFINE toggle_gf flag8,2 ; =1: Toggle GF/aGF
572 #DEFINE use_agf flag8,3 ; =1: Use aGF (instead of GF)
573 #DEFINE battery_removed_in_usb flag8,4 ; =1: The battery has been removed in USB
574 #DEFINE adc_running flag8,5 ; =1: The ADC is in use
575 #DEFINE comm_service_enabled flag8,6 ; =1: COMM Service mode unlocked
576 #DEFINE compass_enabled flag8,7 ; =1: The compass and accelerometer chip is active
577
578 ;=============================================================================
579 ; C-code Routines
580 ; PART 2
581 extern deco_calc_CNS_decrease_15min
582 extern deco_calc_CNS_fraction
583 extern deco_calc_desaturation_time
584 extern deco_calc_hauptroutine
585 extern deco_calc_tissue
586 extern deco_calc_percentage
587 extern deco_calc_wo_deco_step_1_min
588 extern deco_calc_dive_interval
589 extern deco_clear_CNS_fraction
590 extern deco_clear_tissue
591 extern deco_pull_tissues_from_vault
592 extern deco_push_tissues_to_vault
593