Mercurial > public > hwos_code
annotate src/text_german.inc @ 232:fe9d88fee09f
show start gas in OC mode permanently
| author | mh@mh-THINK |
|---|---|
| date | Sun, 22 Feb 2015 12:14:03 -0400 |
| parents | effd7259f5a5 |
| children | 6c4ad243cb44 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 3 ; File text_german.asm | |
| 4 ; | |
| 5 ; German texts translation file. | |
| 6 ; | |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 | |
| 10 ; Basic texts | |
| 11 TCODE tNo, "Nein" ; No | |
| 12 TCODE tYes, "Ja" ; Yes = No + 1 | |
| 13 | |
| 14 ; Surface-mode texts | |
| 15 TCODE tBeta, "beta" ; beta | |
| 76 | 16 TCODE tMenu, "<Menü" ; <Menu |
| 0 | 17 TCODE tView, "View>" ; View> |
| 18 TCODE tHeading, "Kurs:" ; Heading: | |
| 19 | |
| 20 ; Divemode Menu | |
| 21 TCODE tDivemenu_Gaslist, "Gasliste" ; Gaslist | |
| 22 TCODE tDivemenu_ResetAvr, "Stoppuhr" ; Reset Avr. | |
| 23 TCODE tDivemenu_Setpoint, "Setpoint" ; Setpoint | |
| 24 TCODE tDivemenu_UseSensor,"Ben. Sensor" ; Use Sensor | |
| 25 TCODE tDivemenu_ToggleGF, "Toggle GF" ; Toggle GF | |
| 26 | |
| 27 ; Main menu | |
| 28 TCODE tNext, "<Weiter" ; <Next | |
| 29 TCODE tEnter, "Enter>" ; Enter> | |
| 30 | |
| 31 TCODE tMainMenu, "Hauptmenü" ; MainMenu | |
| 32 TCODE tLogbook, "Logbuch" ; Logbook | |
| 33 TCODE tGasSetup, "OC Gas Setup" ; OC Gas Setup | |
| 34 TCODE tSetTime, "Zeit stellen" ; Set Time | |
| 35 TCODE tSetDate, "Datum stellen" ; Set Date | |
| 36 TCODE tSetTimeDate,"Datum & Uhrzeit"; Set Time & Date | |
| 37 TCODE tDispSets, "Anzeige" ; Display Settings | |
| 38 TCODE tExit, "Ende" ; Exit | |
| 39 TCODE tResetMenu, "Reset Menü" ; Reset Menu | |
| 40 TCODE tDiveModeMenu,"Dekoberechnung" ; Deco Mode | |
| 41 TCODE tInfoMenu, "Informationen" ; Information | |
| 42 TCODE tCCRSetup, "CCR Menü" ; CCR Setup | |
| 43 TCODE tDiluentSetup,"Diluent Menü" ; Diluent Setup | |
| 44 TCODE tFixedSetpoints,"Feste Setpoints" ; Fixed Setpoints | |
| 45 TCODE tCCRSensor, "CCR Sensor" ; CCR Sensor | |
| 113 | 46 TCODE tCalibrateMenu, "Kalibrierung" ; Calibration |
| 47 TCODE tCalibrationGas, "Kal. Gas O2:" ; Cal. Gas O2: | |
| 48 TCODE tCalibrate, "Kalibrieren" ; Calibrate | |
| 0 | 49 |
| 50 ; Gas menu | |
| 51 TCODE tGaslist, "OC Gas Liste" | |
|
89
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
76
diff
changeset
|
52 TCODE tGaslistCC, "CC Gas Liste" ; CC Diluents |
| 0 | 53 TCODE tGasEdit, "Gas einstellen" |
| 54 TCODE tType, "Type: " | |
| 55 TCODE tGasDisabled,"Deaktiviert" ; Disabled | |
| 56 TCODE tGasFirst, "Start" ; First | |
| 57 TCODE tGasTravel, "Reise" ; Travel | |
| 58 TCODE tGasDeco, "Deko" ; Deco | |
| 59 TCODE tDilDisabled,"Deaktiviert" ; Disabled | |
| 60 TCODE tDilFirst, "Start" ; First | |
| 61 TCODE tDilNorm, "Normal" ; Normal | |
| 62 TCODE tAir, "Luft " ; Enum: values must follows (5 chars) | |
| 63 TCODE tO2, "O2 " ; tAir + 5 | |
| 64 TCODE tO2Plus, "O2 +" | |
| 65 TCODE tO2Minus, "O2 -" | |
| 66 TCODE tHePlus, "He +" | |
| 67 TCODE tHeMinus, "He -" | |
| 68 TCODE tMOD, "MOD:" | |
| 69 TCODE tEAD, "EAD:" | |
| 70 TCODE tGasDepth, "Wechseltiefe" | |
| 71 TCODE tDepthPlus, "Tiefe +" | |
| 72 TCODE tDepthMinus,"Tiefe -" | |
| 73 TCODE tDepthReset,"Reset auf MOD:" | |
| 74 TCODE tSetup_mix, "Mix Einstellen" | |
| 75 TCODE tCCRMode, "CCR Modus:" ; CCR Mode: | |
| 76 TCODE tCCRModeFixedSP, "Fester SP" ; Fixed SP | |
| 77 TCODE tCCRModeSensor, "Sensor" ; Sensor | |
| 78 TCODE tSP, "SP" ; SP (SetPoint) | |
| 79 TCODE tSPPlus, "pO2+" ; pO2+ | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
144
diff
changeset
|
80 TCODE tSensorFallback, "Fallback:" ; Fallback: |
|
154
afa31c815f24
NEW: Show ppO2 for change depth during gas setup
heinrichsweikamp
parents:
148
diff
changeset
|
81 TCODE tppO2, "ppO2:" ; ppO2: |
| 0 | 82 |
| 83 ; New batteries menu | |
| 144 | 84 TCODE tNewBattTitle, "Neue Batterie?" |
| 0 | 85 TCODE tNewBattOld, "Behalte alte" |
| 86 TCODE tNewBattNew36, "Neue 3,6V" | |
| 87 TCODE tNewBattNew15, "Neue 1,5V" | |
| 88 | |
| 89 ; Gaslist management | |
| 90 TCODE tGas, "Gas" ; Gas | |
| 91 TCODE tGasErr, "Err" ; Err (3 chars) | |
| 92 | |
| 93 ; Communication Menu | |
| 94 TCODE tUsbMode, "Starte USB" | |
| 95 TCODE tUsbTitle, "USB Modus" | |
| 96 TCODE tUsbStarting, "Starte....." | |
| 182 | 97 TCODE tUsbStartDone, "Fertig." |
| 0 | 98 TCODE tUsbServiceMode, "Servicemodus aktiv" |
| 99 TCODE tUsbClosed, "Abgebrochen" | |
| 100 TCODE tUsbExit, "Beendet" | |
| 101 TCODE tUsbDownloadMode, "Downloadmodus aktiv" | |
| 102 TCODE tUsbLlBld, "Low-Level Bootloader" | |
| 103 | |
| 104 ; Dive Settings | |
| 105 TCODE tDvMode, "Betrieb:" | |
| 106 TCODE tDvOC, "OC" | |
| 107 TCODE tDvCC, "CC" | |
| 108 TCODE tDvGauge, "Tiefen." | |
| 109 TCODE tDvApnea, "Apnoe" | |
| 103 | 110 TCODE tDkMode, "Dekotyp:" |
| 0 | 111 TCODE tZHL16, "ZH-L16" |
| 112 TCODE tZHL16GF, "ZH-L16+GF" | |
| 113 TCODE tPPO2Max, "ppO2 Max:" | |
| 114 TCODE tPPO2Min, "ppO2 Min:" | |
| 49 | 115 TCODE tLastDecostop, "Letzt. Stop:" |
| 0 | 116 TCODE tDecoparameters, "Deko Parameter" |
| 117 TCODE tGF_low, "GF low:" | |
| 118 TCODE tGF_high, "GF high:" | |
| 119 TCODE tSaturationMult, "Sättigung:" | |
| 120 TCODE tDesaturationMult, "Entsättigung:" | |
| 121 TCODE tFTTSMenu, "Future TTS:" ; Future TTS | |
| 122 TCODE taGFMenu, "Alternativ-GF" ; Alternative GF | |
| 123 TCODE taGF_low, "aGF low:" ; aGF low | |
| 124 TCODE taGF_high, "aGF high:" ; aGF high | |
| 125 TCODE taGF_enable,"aGF Wählbar:" ; aGF Selectable | |
| 126 TCODE tDiveaGF_active,"aGF Aktiv" ; aGF Active | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
103
diff
changeset
|
127 TCODE tppO2settings,"ppO2 Einstellungen" ; ppO2 Settings |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
103
diff
changeset
|
128 TCODE tsafetystopmenu,"Sicherheitsstop:" ; Safety Stop: |
| 0 | 129 |
| 130 ; Display Settings | |
| 131 TCODE tBright, "Helligkeit:" | |
| 132 TCODE tEco, "Eco" | |
| 133 TCODE tMedium, "Mittel" | |
| 134 TCODE tHigh, "Hoch" | |
| 136 | 135 TCODE tDvSalinity,"Salinität:" ; Salinity |
|
155
5f71e31bd5b3
CHANGE: Re-arranged Settings Menu, add 180? rotate to menu
heinrichsweikamp
parents:
154
diff
changeset
|
136 TCODE tFlip, "Anzeige drehen:" ; Rotate Screen |
| 0 | 137 |
| 138 ; Setup Menu | |
| 139 TCODE tSystSets, "Konfiguration" | |
| 140 TCODE tLanguage, "Sprache:" | |
| 141 TCODE tEnglish, "Englisch" | |
| 142 TCODE tGerman, "Deutsch" | |
| 143 TCODE tFrench, "Französisch" | |
| 144 TCODE tItalian, "Italienisch" | |
| 145 TCODE tCompassMenu,"Kompass-kalibrierung" ; Compass calibration | |
|
90
3274e87fd027
NEW: automatic compass gain makes calibration quicker
heinrichsweikamp
parents:
89
diff
changeset
|
146 TCODE tCompassGain,"Empfindlichkeit:" ; Compass gain: |
| 0 | 147 |
| 148 TCODE tUnits, "Einheiten:" | |
| 149 TCODE tMetric, " m/°C" ; Enum menu | |
| 150 TCODE tImperial, "ft/°F" | |
| 151 | |
| 200 | 152 TCODE tDefName, "HW OSTC" |
| 0 | 153 TCODE tbar, "bar" ; bar |
| 154 | |
|
220
effd7259f5a5
make button sensitivity configurable (cR hardware)
heinrichsweikamp
parents:
216
diff
changeset
|
155 TCODE tButtonleft,"Taster links:" ; Left button |
|
effd7259f5a5
make button sensitivity configurable (cR hardware)
heinrichsweikamp
parents:
216
diff
changeset
|
156 TCODE tButtonright,"Taster rechts:" ; Right button |
|
effd7259f5a5
make button sensitivity configurable (cR hardware)
heinrichsweikamp
parents:
216
diff
changeset
|
157 |
| 0 | 158 ; Units for all menu |
| 159 TCODE tMeters, "m" | |
| 160 TCODE tFeets, "ft" | |
| 161 TCODE tFeets1, "f" | |
| 162 TCODE tMinutes, "'" | |
| 163 TCODE tPercent, "%" | |
| 164 | |
| 165 ; Date | |
| 166 TCODE tDateFormat, "Datum:" | |
| 167 TCODE tDateformat, "MMTTJJ" | |
| 168 TCODE tDateformat1,"TTMMJJ" | |
| 169 TCODE tDateformat2,"JJMMTT" | |
| 170 | |
| 171 ; Simulator menu | |
| 136 | 172 TCODE tInter, "Start Simulator" ; Start Simulator |
| 173 TCODE tPlan, "Simulator" ; Simulator | |
| 0 | 174 |
| 175 ; Decoplanner submenu | |
| 176 TCODE tBtTm, "Grundzeit:" ; Bot. Time: (10 chars) | |
|
208
53771bd3d567
NEW: Show plan parameters in decoplan result page
heinrichsweikamp
parents:
200
diff
changeset
|
177 TCODE tBtTm_short,"Zeit:" ; Bot. Time: (max. 6 chars) |
| 0 | 178 TCODE tMxDep, "Max.Tiefe:" ; Max Depth: (10 chars) |
| 179 TCODE tIntvl, "Intervall:" ; Interval : (10 chars) | |
| 180 TCODE tDeco, "Deko berechnen" ; Calculate Deco | |
| 181 TCODE tDivePlan, "Tauchplan:" ; Dive Plan: | |
| 182 TCODE tNoDeco, "Keine Deco" ; No Deco | |
| 183 TCODE tMore, "Mehr..." ; More... | |
| 184 TCODE tCNS, "ZNS" ; CNS | |
| 185 | |
| 186 ; Information menu | |
| 187 TCODE tFirmware, "Firmware: " ; Firmware: (space) | |
| 188 TCODE tSerial, "Seriennr.: " ; Serial : (space) | |
| 62 | 189 TCODE tTotalDives,"Anzahl TG: " ; Total Dives: |
| 190 TCODE tBatteryV, "Batterie: " ; Battery: | |
| 0 | 191 |
| 192 ; Divemode screen | |
| 193 TCODE tNDL, " NZ" | |
| 194 TCODE tTTS, "TTS" | |
| 195 TCODE tVelMetric, "m/min" | |
| 196 TCODE tVelImperial,"ft/m " | |
| 197 TCODE tGasSelect, "Wähle Gas" ; Select Gas | |
| 198 TCODE tSelectAir, "Air " ; Air | |
| 199 TCODE tSelectO2, "O2 " ; O2 | |
| 200 TCODE tSelectNx, "Nx" ; Nx | |
| 201 TCODE tSelectTx, "Tx" ; Tx | |
| 202 TCODE tDepth, "Tiefe" ; Depth | |
| 203 TCODE tMaxDepth, "Max. Tiefe" ; Max. Depth | |
| 136 | 204 TCODE tDivetime, " Zeit" ; Divetime |
| 0 | 205 TCODE tDiveHudMask1, "Sensor 1" |
| 206 TCODE tDiveHudMask2, "Sensor 2" | |
| 207 TCODE tDiveHudMask3, "Sensor 3" | |
| 208 TCODE tDiveTotalAvr, "Durchschn.1" | |
| 209 TCODE tDiveStopwatch, "Stoppuhr" | |
| 210 TCODE tDiveStopAvr, "Durchschn.2" | |
|
134
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
211 TCODE tApnoeTotal, " Total" ; Total (Six chars, right alligned) |
| 0 | 212 TCODE tApnoeMax, " Letzter TG" ; Last decend |
| 213 TCODE tApnoeSurface, "Oberflächenzeit" ; Surface Time | |
| 214 TCODE tDiveDecoplan, "Dekoplan" ; Decoplan | |
| 215 TCODE tDiveClock, "Uhr" ; Clock | |
| 216 TCODE tDiveEAD_END, "EAD/END" ; EAD/END | |
| 217 TCODE tDiveTissues, "Gewebe" ; Tissues | |
| 218 TCODE tEND, "END:" ; END: | |
| 219 TCODE tHe, "He" ; He | |
| 220 TCODE tN2, "N2" ; N2 | |
| 221 TCODE tDiveBailout, "Bailout" ; Bailout | |
| 222 TCODE tGFactors, "GF Values" ; GF Values | |
| 223 TCODE taGFactors, "aGF Values" ; aGF Values | |
| 224 TCODE tGFInfo, "GF Info" ; GF Info | |
| 123 | 225 TCODE tCeiling, "Ceiling" ; Ceiling |
| 131 | 226 TCODE tDiveSafetyStop,"Stopp" ; Stop (Five chars, right alligned) |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
144
diff
changeset
|
227 TCODE tDiveFallback, "Fallback!" ; Fallback! (max. nine chars) |
| 0 | 228 |
| 229 ; Divemode menu | |
| 230 TCODE tDivePreMenu, "Menü?" ; Menu? | |
| 231 | |
| 232 ; Simulator menu | |
| 233 TCODE tQuitSim, "Ende?" ; Quit Simulation? | |
| 234 TCODE tDescent1m, "Sim:-1m" ; Descent 1m | |
| 235 TCODE tAscent1m, "Sim:+1m" ; Ascent 1m | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
208
diff
changeset
|
236 TCODE tplus5min, "Sim:+5'" ; +5 mins |
| 0 | 237 |
| 238 ; Logbook | |
| 239 TCODE tCNS2, "ZNS:" | |
| 240 TCODE tAVR, "Mit:" | |
| 241 TCODE tGF, "GF:" | |
| 242 TCODE tSAT, "Sät:" ; Sat: | |
| 243 | |
| 244 ; Logbook units | |
| 245 TCODE tLogTunitC, "°C" | |
| 246 TCODE tLogTunitF, "°F" | |
| 247 TCODE tKGL, "kg/l" | |
| 248 TCODE tMBAR, "mbar" | |
| 249 | |
| 250 ; Logbook menu | |
| 251 TCODE tNextLog, "Nächste Seite" | |
| 252 TCODE tExitLog, "Logbuch beenden" | |
| 253 | |
| 254 ; Reset menu | |
| 255 TCODE tReboot, "Neu starten" ;Reboot | |
| 256 TCODE tResetMenu2,"Sind Sie sicher?" ;Are you sure? | |
| 257 TCODE tAbort, "Abbrechen" ;Abort | |
| 258 TCODE tResetSettings, "Alles zurücksetzen";Reset all | |
| 259 TCODE tResetDeco, "Deko zurücksetzen" ;Reset Deco | |
| 260 TCODE tResetBattery, "Batterie zurücksetzen" ;Reset Battery | |
| 63 | 261 TCODE tResetLogbook, "Logbuch zurücksetzen" ;Reset Logbook |
| 0 | 262 |
| 263 ; Set Time Menu/Set Date Menu | |
| 264 TCODE tSetHours, "Stunden einst." ; Set Hours | |
| 265 TCODE tSetMinutes,"Minuten einst." ; Set Minutes | |
| 266 TCODE tSetSeconds,"Sekunden zurücks." ; Clear seconds | |
| 267 TCODE tSetDay, "Setze Tag" ; Set Day | |
| 268 TCODE tSetMonth, "Setze Monat" ; Set Month | |
| 269 TCODE tSetYear, "Setze Jahr" ; Set Year | |
| 270 | |
| 271 ; After update texts | |
| 52 | 272 TCODE tNewFirmware1, "Update erfolgreich!" ; Update successful! |
| 0 | 273 TCODE tNewFirmware2, "Neue Firmware: " ; New Firmware: |
| 274 | |
| 275 ; Logbook Offset Menu | |
| 276 TCODE tLogOffset, "Logbuch offset" ; Logbook offset | |
| 277 TCODE tLogOffsetp1, "+1" ; +1 | |
| 278 TCODE tLogOffsetp10, "+10" ; +10 | |
| 279 TCODE tLogOffsetm1, "-1" ; -1 | |
| 280 TCODE tLogOffsetm10, "-10" ; -10 | |
|
23
e402813343b6
new option to switch samplingrate between 10s and 2s
heinrichsweikamp
parents:
18
diff
changeset
|
281 |
|
e402813343b6
new option to switch samplingrate between 10s and 2s
heinrichsweikamp
parents:
18
diff
changeset
|
282 ; Sampling rate |
|
e402813343b6
new option to switch samplingrate between 10s and 2s
heinrichsweikamp
parents:
18
diff
changeset
|
283 TCODE tSamplingrate, "Abtastrate:" ; Sampling rate: |
|
e402813343b6
new option to switch samplingrate between 10s and 2s
heinrichsweikamp
parents:
18
diff
changeset
|
284 TCODE tSampling2s, "2s" ; 2s |
|
29
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
285 TCODE tSampling10s, "10s" ; 10s |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
286 |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
287 ; Compass directions |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
288 TCODE tN, "N" ; N(orth),338°-22° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
289 TCODE tNE, "NO" ; North-East,23°-67° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
290 TCODE tE, "O" ; E(east),68°-112° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
291 TCODE tSE, "SO" ; South-East,113°-157° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
292 TCODE tS, "S" ; S(outh),157°-202° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
293 TCODE tSW, "SW" ; South-West,203°-247° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
294 TCODE tW, "W" ; W(West),248°-292° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
295 TCODE tNW, "NW" ; North-West,293°-337° |
|
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
23
diff
changeset
|
296 |
| 50 | 297 ; Color Scheme menu |
| 52 | 298 TCODE tColorScheme, "Farbschema" ; Colour Scheme |
| 51 | 299 TCODE tColorSetDive, "Tauchmodus:" ; Divemode: |
| 300 TCODE tColorSetName0, "Standard" ; Standard | |
| 301 TCODE tColorSetName1, "Rot" ; Red | |
| 302 TCODE tColorSetName2, "Grün" ; Green | |
| 303 TCODE tColorSetName3, "Blau" ; Blue |