Mercurial > public > hwos_code
annotate src/divemode.asm @ 512:f9cc49750736
minor
| author | heinrichsweikamp |
|---|---|
| date | Tue, 04 Jul 2017 19:01:32 +0200 |
| parents | 4e6f5c36f4cc |
| children | 3f6d5cf91f64 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 3 ; File divemode.asm | |
| 4 ; | |
| 5 ; Divemode | |
| 6 ; | |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 10 ; 2011-08-15 : [mH] moving from OSTC code | |
| 11 | |
| 275 | 12 #include "hwos.inc" ; Mandatory header |
| 0 | 13 #include "shared_definitions.h" ; Mailbox from/to p2_deco.c |
| 14 #include "tft_outputs.inc" | |
| 15 #include "strings.inc" | |
| 16 #include "tft.inc" | |
| 17 #include "eeprom_rs232.inc" | |
| 18 #include "isr.inc" | |
| 19 #include "math.inc" | |
| 20 #include "wait.inc" | |
| 21 #include "customview.inc" | |
| 22 #include "start.inc" | |
| 23 #include "adc_lightsensor.inc" | |
| 24 #include "ghostwriter.inc" | |
| 25 #include "i2c.inc" | |
| 113 | 26 #include "calibrate.inc" |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
27 #include "convert.inc" |
| 0 | 28 |
| 29 gui CODE | |
| 30 | |
| 31 global diveloop | |
| 32 diveloop: | |
| 33 banksel common | |
| 34 call speed_normal | |
| 35 call diveloop_boot ; Boot tasks for all modes | |
| 36 | |
| 37 ; Startup Tasks for all modes | |
| 206 | 38 call TFT_boot ; Initialize TFT (includes clear screen) |
| 0 | 39 call TFT_divemode_mask ; Display mask |
| 40 call TFT_temp_divemode ; Displays temperature | |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
41 movff customview_divemode,menupos3 ; Reload last customview |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
42 call customview_mask ; Redraw last custom view |
| 0 | 43 |
| 44 btfsc FLAG_apnoe_mode | |
| 45 bsf realdive ; Set Realdive flag in Apnoe mode | |
| 46 | |
| 47 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 48 bra diveloop_loop | |
| 49 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 50 bra diveloop_loop | |
| 51 | |
| 52 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 53 call TFT_display_ndl_mask ; display "NDL" | |
| 54 | |
| 55 ; +@5 init | |
| 56 setf WREG ; WAIT marker: display "---" | |
| 57 movff WREG,int_O_extra_ascenttime+0 | |
| 58 movff WREG,int_O_extra_ascenttime+1 | |
| 59 movlw 1 | |
| 60 movwf apnoe_mins ; Start compute after next cycle. | |
| 61 | |
| 62 ;-------------------------------------------------------------------------------------------------------- | |
| 63 diveloop_loop: ; The diveloop starts here | |
| 64 btfss onesecupdate | |
| 65 bra diveloop_loop3 | |
| 66 | |
| 67 ; tasks any new second... | |
| 178 | 68 bcf onesecupdate ; one seconds update, clear flag here in case it's set again in ISR before all tasks are done. |
| 69 | |
| 0 | 70 btfsc FLAG_apnoe_mode ; Only in apnoe mode |
| 71 bra diveloop_loop1b ; One Second Tasks in Apnoe mode | |
| 72 | |
| 73 call TFT_divemins ; Display (new) divetime! | |
| 74 call customview_second ; Do every-second tasks for the custom view area | |
| 131 | 75 call divemode_check_for_warnings ; Check for any warnings |
| 0 | 76 |
| 77 ; Tasks only for deco modes | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
78 btfsc show_safety_stop ; Show the safety stop? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
79 call TFT_show_safety_stop ; Yes, show/delete if done. |
| 0 | 80 call calc_deko_divemode ; calculate decompression and display result (any two seconds) |
| 81 bra diveloop_loop1x ; Common Tasks | |
| 82 | |
| 83 diveloop_loop1b: | |
| 84 ; Tasks only for Apnoe mode | |
| 131 | 85 rcall divemode_apnoe_tasks ; 1 sec. Apnoe tasks |
|
134
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
86 call customview_second ; Do every-second tasks for the custom view area |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
87 bra diveloop_loop1x ; Common Tasks |
| 0 | 88 |
| 89 diveloop_loop1x: | |
| 90 ; Common 1sec. tasks for all modes | |
| 131 | 91 rcall timeout_divemode ; dive finished? This routine sets the required flags |
| 92 rcall set_dive_modes ; tests if depth>threshold | |
| 93 rcall set_min_temp ; store min. temp if required | |
| 0 | 94 |
| 95 btfsc store_sample ; store new sample? | |
| 96 call store_dive_data ; Store profile data | |
| 97 | |
| 98 btfss divemode ; Dive finished? | |
| 99 goto ghostwriter_end_dive ; Dive finished! | |
| 100 | |
| 101 btfsc divemode_gaschange ; Gas switch flag set? | |
| 102 rcall gas_switched_common ; Yes | |
| 103 | |
| 104 btfsc toggle_gf ; =1: Toggle GF/aGF | |
| 105 rcall divemodemode_togglegf ; Toggle aGF/GF | |
| 106 | |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
107 btfsc FLAG_ccr_mode ; In CCR mode... |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
108 call check_dive_autosp ; ...check for Auto-SP |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
109 |
| 113 | 110 call compute_ppo2 ; compute mv_sensorX and ppo2_sensorX arrays |
| 111 | |
| 0 | 112 diveloop_loop3: |
| 113 rcall test_switches_divemode ; Check switches in divemode | |
| 114 | |
| 115 global diveloop_loop4 | |
| 116 diveloop_loop4: ; Menu-Exit returns here... | |
| 117 btfsc toggle_customview ; Next view? | |
| 118 call customview_toggle ; Yes, show next customview (and delete this flag) | |
| 119 | |
| 120 btfsc pressure_refresh ; new pressure available? | |
| 121 rcall update_temp_and_or_depth ; Yes, display new depth and clear "pressure_refresh" flag | |
| 122 | |
| 123 btfsc oneminupdate ; one minute tasks | |
| 124 rcall update_divemode60 ; Update clock, etc. | |
| 125 | |
|
239
6c4ad243cb44
CNANGE: aGF pair has same range then normal GF pair
heinrichsweikamp
parents:
220
diff
changeset
|
126 ; btfss quarter_second_update |
|
6c4ad243cb44
CNANGE: aGF pair has same range then normal GF pair
heinrichsweikamp
parents:
220
diff
changeset
|
127 ; bra diveloop_loop4a |
| 83 | 128 |
| 0 | 129 bcf quarter_second_update |
| 130 movlw .6 | |
| 131 cpfseq menupos3 ; in compass view? | |
| 132 bra diveloop_loop4a ; No | |
|
256
5b4ef0b9090d
place compass display code into compass_ops.asm
heinrichsweikamp
parents:
255
diff
changeset
|
133 extern TFT_dive_compass_heading |
| 0 | 134 call TFT_dive_compass_heading ; Yes, update compass heading value |
| 135 diveloop_loop4a: | |
| 136 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 137 bra diveloop_loop5 | |
| 138 bra diveloop_loop6 | |
| 139 diveloop_loop5: | |
| 140 btfss vusb_in ; USB (still) plugged in? | |
| 141 bcf enable_screen_dumps ; No, clear flag | |
| 142 call rs232_get_byte | |
| 143 btfsc rs232_recieve_overflow | |
| 144 bra diveloop_loop6 | |
| 145 movlw "l" | |
| 146 cpfseq RCREG1 | |
| 147 bra diveloop_loop6 | |
| 148 call TFT_dump_screen ; Dump the screen contents | |
| 149 diveloop_loop6: | |
| 150 | |
| 151 bra diveloop_loop ; Loop the divemode | |
| 152 ;-------------------------------------------------------------------------------------------------------- | |
| 153 | |
| 154 | |
| 155 divemode_apnoe_tasks: ; 1 sec. Apnoe tasks | |
|
134
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
156 call TFT_display_apnoe_descent ; Yes, Show descent timer |
| 0 | 157 call TFT_max_pressure ; use normal max. depth |
| 158 | |
| 159 btfsc divemode2 ; Time running? | |
| 160 bra divemode_apnoe_tasks2 ; New descent, reset data if flag is set | |
| 161 | |
| 162 rcall apnoe_calc_maxdepth | |
| 163 call TFT_display_apnoe_surface | |
| 164 call TFT_display_apnoe_last_max ; Show last max. depth | |
| 165 incf apnoe_surface_secs,F | |
| 166 movlw d'60' | |
| 167 cpfseq apnoe_surface_secs | |
| 168 bra divemode_apnoe_tasks1 | |
| 169 clrf apnoe_surface_secs | |
| 170 incf apnoe_surface_mins,F | |
| 171 | |
| 172 divemode_apnoe_tasks1: | |
| 173 bcf FLAG_active_descent ; Clear flag | |
| 174 btfsc divemode2 ; Time running? | |
| 175 return ; Yes, return | |
| 176 bsf FLAG_active_descent ; Set Flag | |
| 177 return | |
| 178 | |
| 179 divemode_apnoe_tasks2: | |
| 180 btfss FLAG_active_descent ; Are we descending? | |
| 181 return ; No, We are at the surface | |
| 182 rcall apnoe_calc_maxdepth ; Yes! | |
| 183 call TFT_apnoe_clear_surface ; Clear Surface timer | |
| 184 clrf apnoe_timeout_counter ; Delete timeout | |
| 185 clrf apnoe_surface_secs | |
| 186 clrf apnoe_surface_mins | |
| 187 clrf apnoe_secs | |
| 188 clrf apnoe_mins ; Reset Descent time | |
| 189 movlw .0 | |
| 190 movff WREG,max_pressure+0 | |
| 191 movff WREG,max_pressure+1 ; Reset Max. Depth | |
| 192 bcf FLAG_active_descent ; Clear flag | |
| 193 return | |
| 194 | |
| 195 global apnoe_calc_maxdepth | |
| 196 apnoe_calc_maxdepth: | |
| 197 movff apnoe_max_pressure+0,sub_a+0 | |
| 198 movff apnoe_max_pressure+1,sub_a+1 | |
| 199 movff max_pressure+0,sub_b+0 | |
| 200 movff max_pressure+1,sub_b+1 | |
| 201 call subU16 ; sub_c = sub_a - sub_b | |
| 202 ; apnoe_max_pressure<max_pressure -> neg_flag=1 | |
| 203 ; max_pressure<=apnoe_max_pressure -> neg_flag=0 | |
| 204 btfss neg_flag | |
| 205 return | |
| 206 ;apnoe_max_pressure<max_pressure | |
| 207 movff max_pressure+0,apnoe_max_pressure+0 | |
| 208 movff max_pressure+1,apnoe_max_pressure+1 | |
| 209 return | |
| 210 | |
| 211 | |
| 212 calc_deko_divemode: | |
| 213 btfsc twosecupdate ; two seconds after the last call | |
| 214 bra calc_deko_divemode2 ; Yes, calculate and display deco data ("first second") | |
| 215 | |
| 216 bsf twosecupdate ; No, but next second! | |
| 217 ; Routines used in the "other second" | |
| 218 call calc_average_depth ; calculate average depth | |
| 219 call calc_velocity ; calculate vertical velocity and display if > threshold (every two seconds) | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
220 call set_reset_safety_stop ; Set flags for safety stop and/or reset safety stop |
| 0 | 221 call TFT_debug_output |
| 222 | |
| 223 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 224 return | |
| 225 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 226 return | |
| 227 | |
| 228 ; Calculate CNS | |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
229 btfss FLAG_pscr_mode ; in PSCR mode? |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
230 rcall set_actual_ppo2 ; No, set char_I_actual_ppO2 |
| 485 | 231 btfsc is_bailout ; Always in bailout... |
| 232 rcall set_actual_ppo2 ; ...set char_I_actual_ppO2 | |
| 233 | |
| 0 | 234 clrf WREG |
| 235 movff WREG,char_I_step_is_1min ; Make sure to be in 2sec mode. | |
| 236 call deco_calc_CNS_fraction ; calculate CNS | |
| 237 movlb b'00000001' ; rambank 1 selected | |
| 238 ; Check for a gas change | |
| 428 | 239 bra check_gas_change ; Checks if a better gas should be selected (by user) and return... |
| 0 | 240 |
| 241 global set_actual_ppo2 | |
| 242 set_actual_ppo2: ; calculate ppO2 in 0.01bar (e.g. 150 = 1.50 bar ppO2) | |
| 111 | 243 btfsc divemode ; in divemode |
| 244 bra set_actual_ppo2_dive ; Yes | |
| 245 ; No, use simulated ambient pressure for char_I_actual_ppO2 | |
| 246 movff char_I_bottom_depth,WREG | |
| 247 mullw .100 | |
| 248 movlw LOW(.1000) | |
| 249 addwf PRODL,W | |
| 250 movwf xA+0 | |
| 251 movlw HIGH(.1000) | |
| 252 addwfc PRODH,W | |
| 253 movwf xA+1 ; P_amb in millibar (1000 = 1.00 bar). | |
| 254 bra set_actual_ppo2_common | |
| 255 set_actual_ppo2_dive: | |
| 0 | 256 SAFE_2BYTE_COPY amb_pressure, xA ; P_amb in millibar (1000 = 1.00 bar). |
| 111 | 257 set_actual_ppo2_common: |
| 113 | 258 movlw d'10' |
| 0 | 259 movwf xB+0 |
| 260 clrf xB+1 | |
| 261 call div16x16 ; xC=p_amb/10 (100 = 1.00 bar). | |
| 262 movff xC+0,xA+0 | |
| 263 movff xC+1,xA+1 | |
| 264 movff char_I_O2_ratio,xB+0 | |
| 265 clrf xB+1 | |
| 266 call mult16x16 ; char_I_O2_ratio * (p_amb/10) | |
| 267 movff xC+0,xA+0 | |
| 268 movff xC+1,xA+1 | |
| 269 movlw d'100' | |
| 270 movwf xB+0 | |
| 271 clrf xB+1 | |
| 272 call div16x16 ; xC=(char_I_O2_ratio * p_amb/10)/100 | |
| 273 | |
| 274 ; Copy ppO2 for CNS calculation | |
| 275 tstfsz xC+1 ; Is ppO2 > 2.55bar ? | |
| 276 setf xC+0 ; yes: bound to 2.55... better than wrap around. | |
| 277 | |
| 278 movff xC+0, char_I_actual_ppO2 ; copy last ppO2 to buffer register | |
| 279 btfsc is_bailout ; In Bailout? | |
| 280 return ; Yes, done. | |
| 281 ; No Bailout, check for ccr mode | |
| 282 btfsc FLAG_ccr_mode ; If FLAG_ccr_mode=1... | |
| 283 movff char_I_const_ppO2, char_I_actual_ppO2 ; ...copy last ppO2 to buffer register | |
| 284 return | |
| 285 | |
| 195 | 286 check_fallback_clear: |
| 287 call check_sensors ; Setups "use_O2_sensorX" flags | |
| 288 ; Copy use flags to voting logic flags in case we are no longer in fallback | |
| 289 btfsc use_O2_sensor1 | |
| 290 bsf voting_logic_sensor1 | |
| 291 btfsc use_O2_sensor2 | |
| 292 bsf voting_logic_sensor2 | |
| 293 btfsc use_O2_sensor3 | |
| 294 bsf voting_logic_sensor3 | |
| 295 rcall divemode_setup_sensor_values ; Setup sensor values | |
| 428 | 296 goto check_sensors ; Check O2 sensor thresholds for fallback customview_minute |
| 0 | 297 |
| 298 calc_deko_divemode2: | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
299 bcf twosecupdate |
| 0 | 300 |
| 301 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 302 return | |
| 303 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 304 return | |
| 305 | |
| 306 extern deco_setup_dive | |
| 307 call deco_setup_dive ; Pass all parameters to the C code | |
| 308 | |
| 195 | 309 |
| 310 btfsc setpoint_fallback ; Are we in Fallback? | |
| 311 rcall check_fallback_clear ; Yes, check if we still have fallback condition | |
| 312 | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
313 bcf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
314 |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
315 btfsc FLAG_ccr_mode ; In CCR mode? |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
316 rcall calc_deko_divemode_sensor ; External sensor stuff |
|
152
19ad15f04f60
BUGFIX: Clear Setpoint-Fallback warning when in bailout
heinrichsweikamp
parents:
148
diff
changeset
|
317 |
| 485 | 318 ; btfsc FLAG_pscr_mode ; In PSCR mode? |
| 319 ; rcall calc_deko_divemode_sensor ; External sensor stuff | |
| 320 | |
| 321 | |
| 0 | 322 SAFE_2BYTE_COPY amb_pressure,int_I_pres_respiration ; C-code needs the ambient pressure |
| 323 clrf WREG | |
| 324 movff WREG,char_I_step_is_1min ; Force 2 second deco mode | |
| 325 | |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
326 movff char_I_O2_ratio,lo_temp ; Backup original value for everything |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
327 movff char_I_N2_ratio,hi_temp ; Backup original value for everything |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
328 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
329 btfss FLAG_pscr_mode |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
330 bra calc_deko_divemode2a ; Non-PSCR modes... |
| 485 | 331 |
| 332 btfsc is_bailout | |
| 333 bra calc_deko_divemode2a ; Skip in bailout | |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
334 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
335 ; in PSCR mode, compute fO2 into char_I_O2_ratio |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
336 call compute_pscr_ppo2 ; pSCR ppO2 into sub_c:2 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
337 movff sub_c+0,xA+0 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
338 movff sub_c+1,xA+1 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
339 movlw LOW .10 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
340 movwf xB+0 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
341 movlw HIGH .10 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
342 movwf xB+1 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
343 call mult16x16 ;xA*xB=xC -> xC:4 = ppO2*10 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
344 SAFE_2BYTE_COPY amb_pressure, xB |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
345 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
346 ; xC+0 has O2 in percent |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
347 movff xC+0,char_I_O2_ratio |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
348 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
349 movff char_I_He_ratio, wait_temp ; copy into bank1 register |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
350 bsf STATUS,C ; Borrow bit |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
351 movlw d'100' ; 100% |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
352 subfwb wait_temp,W ; minus He |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
353 bsf STATUS,C ; Borrow bit |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
354 subfwb xC+0,W ; minus O2 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
355 movff WREG, char_I_N2_ratio ; = N2! |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
356 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
357 calc_deko_divemode2a: |
| 0 | 358 clrf TMR5L |
| 359 clrf TMR5H ; 30,51757813µs/bit in TMR5L:TMR5H | |
| 360 call deco_calc_hauptroutine ; calc_tissue | |
| 361 movlb .1 | |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
362 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
363 movff lo_temp,char_I_O2_ratio ; Restore original value for everything |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
364 movff hi_temp,char_I_N2_ratio ; Restore original value for everything |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
365 |
| 0 | 366 |
| 367 movff char_O_deco_status,WREG ; Is a compute cycle finished ? | |
| 368 iorwf WREG,F | |
| 369 btfss STATUS,Z | |
| 370 return ; Return is status <> 0 | |
| 371 | |
| 372 ; Check if deco stops are necessary ? | |
| 373 movff char_O_first_deco_depth,wait_temp ; copy ceiling to temp register | |
| 374 tstfsz wait_temp ; Ceiling<0m? | |
| 375 bra calc_deko_divemode3 ; Yes! | |
| 376 | |
| 377 btfsc decostop_active ; Already in nodeco mode ? | |
| 378 call TFT_display_ndl_mask ; No, Clear deco data, display nostop time | |
| 379 bcf decostop_active ; clear flag (again) | |
| 380 | |
| 381 ; Copy for profile recording | |
| 382 clrf decodata+0 | |
| 383 movff char_O_nullzeit,decodata+1 ; NDL | |
| 384 | |
| 428 | 385 goto TFT_display_ndl ; display no deco limit, and return... |
| 0 | 386 |
| 387 calc_deko_divemode3: | |
| 388 btfss decostop_active ; Already in deco mode ? | |
| 389 call TFT_display_deko_mask ; No, clear nostop time, display decodata | |
| 390 bsf decostop_active ; Set flag (again) | |
| 391 | |
| 392 ; Copy for profile recording | |
| 393 movff char_O_first_deco_depth,decodata+0 ; ceiling | |
| 394 movff char_O_first_deco_time,decodata+1 ; length of first stop in minues | |
| 395 call TFT_display_deko ; display decodata | |
| 396 call TFT_show_TTS_divemode ; display TTS | |
| 397 | |
| 398 movff char_I_extra_time,WREG | |
| 399 tstfsz WREG ; extra time = 0? | |
| 400 bra calc_deko_divemode4 ; No, compute it | |
| 401 return | |
| 402 | |
| 403 calc_deko_divemode4: | |
| 404 ; Check if extra cycles are needed to compute @5 variant: | |
| 405 decfsz apnoe_mins,F ; Reached count-down ? | |
| 406 return ; No: don't compute yet. | |
| 407 | |
| 408 movlw .6 | |
| 409 movff WREG,char_O_deco_status ; Stole next cycles for @5 variant. | |
| 410 | |
| 411 movlw .2 ; Restart countdown. | |
| 412 movwf apnoe_mins | |
| 413 return ; done. | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
414 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
415 calc_deko_divemode_sensor: ; External sensor stuff |
|
337
508d7fb98b34
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
heinrichsweikamp
parents:
335
diff
changeset
|
416 movff opt_ccr_mode,WREG ; =0: Fixed SP, =1: Sensor, =2: Auto SP |
|
508d7fb98b34
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
heinrichsweikamp
parents:
335
diff
changeset
|
417 sublw .1 ; opt_ccr_mode = 1 (Sensor)? |
|
508d7fb98b34
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
heinrichsweikamp
parents:
335
diff
changeset
|
418 bnz calc_deko_divemode_sensor_done ; No, return |
|
508d7fb98b34
cleanup menu, add "Auto SP" option (Not working yet), minor layout change in compass menu
heinrichsweikamp
parents:
335
diff
changeset
|
419 |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
420 rcall divemode_setup_sensor_values ; Setup sensor values |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
421 call check_sensors ; Check O2 sensor thresholds for fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
422 movff sensor_setpoint,char_I_const_ppO2; Copy sensor result |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
423 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
424 TSTOSS opt_sensor_fallback ; =1: Fallback to SP1 when sensor is lost |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
425 return ; Never fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
426 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
427 btfsc is_bailout ; In bailout? |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
428 return ; Never fallback in bailout |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
429 ; Check if we should fallback to SP1 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
430 btfsc use_O2_sensor1 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
431 return ; At least one sensor is active, no fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
432 btfsc use_O2_sensor2 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
433 return ; At least one sensor is active, no fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
434 btfsc use_O2_sensor3 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
435 return ; At least one sensor is active, no fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
436 ; No sensor in use -> fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
437 movff char_I_setpoint_cbar+0,char_I_const_ppO2 ; Setup fixed Setpoint (Always fallback to SP1), overwrite sensor result |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
438 bsf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
| 339 | 439 calc_deko_divemode_sensor_done: |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
440 return |
| 0 | 441 |
| 442 ;----------------------------------------------------------------------------- | |
| 443 | |
| 444 divemodemode_togglegf: ; Toggle aGF/GF | |
| 445 bcf toggle_gf ; clear flag | |
| 446 btg use_agf ; Toggle GF | |
| 447 call TFT_gf_mask ; Setup Mask | |
| 448 clrf WREG | |
| 449 movff WREG,char_O_deco_status ; Restart decoplan computation | |
| 450 return | |
| 451 | |
| 193 | 452 global divemode_setup_sensor_values |
| 0 | 453 divemode_setup_sensor_values: |
| 454 ; sum up sensor values (in xA:2) and active sensors in (xB:2) | |
| 455 clrf xB+0 | |
| 456 clrf xB+1 | |
| 457 clrf xA+0 | |
| 458 clrf xA+1 | |
| 192 | 459 btfss use_O2_sensor1 ; Sensor1 active? |
| 460 bra divemode_setup_sensor_values2 ; No | |
| 461 btfss voting_logic_sensor1 ; Sensor within voting logic? | |
| 0 | 462 bra divemode_setup_sensor_values2 ; No |
| 463 movf o2_ppo2_sensor1,W | |
| 464 addwf xA+0 | |
| 465 movlw .0 | |
| 466 addwfc xA+1 ; Add into xA:2 | |
| 467 incf xB+0,F ; Add a sensor | |
| 468 divemode_setup_sensor_values2: | |
| 192 | 469 btfss use_O2_sensor2 ; Sensor2 active? |
| 470 bra divemode_setup_sensor_values3 ; No | |
| 471 btfss voting_logic_sensor2 ; Sensor within voting logic? | |
| 0 | 472 bra divemode_setup_sensor_values3 ; No |
| 473 movf o2_ppo2_sensor2,W | |
| 474 addwf xA+0 | |
| 475 movlw .0 | |
| 476 addwfc xA+1 ; Add into xA:2 | |
| 477 incf xB+0,F ; Add a sensor | |
| 478 divemode_setup_sensor_values3: | |
| 192 | 479 btfss use_O2_sensor3 ; Sensor3 active? |
| 480 bra divemode_setup_sensor_values4 ; No | |
| 481 btfss voting_logic_sensor3 ; Sensor within voting logic? | |
| 0 | 482 bra divemode_setup_sensor_values4 ; No |
| 483 movf o2_ppo2_sensor3,W | |
| 484 addwf xA+0 | |
| 485 movlw .0 | |
| 486 addwfc xA+1 ; Add into xA:2 | |
| 487 incf xB+0,F ; Add a sensor | |
| 488 divemode_setup_sensor_values4: | |
| 489 call div16x16 ; xA/xB=xC with xA+0 as remainder | |
| 490 movff xC+0,sensor_setpoint ; Copy result | |
| 491 return | |
| 492 | |
| 493 calc_velocity: ; called every two seconds | |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
494 btfsc display_velocity |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
495 bra calc_velocity1 ; Always update if already displayed |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
496 btfss divemode2 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
497 return ; display velocity only if deepter then 1m (Not at the surface after the dive) |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
498 calc_velocity1: |
| 0 | 499 SAFE_2BYTE_COPY amb_pressure, sub_a |
| 500 movff last_pressure_velocity+0,sub_b+0 | |
| 501 movff last_pressure_velocity+1,sub_b+1 | |
| 502 movff sub_a+0,last_pressure_velocity+0 ; store old value for velocity | |
| 503 movff sub_a+1,last_pressure_velocity+1 | |
| 504 | |
| 505 call subU16 ; sub_c = amb_pressure - last_pressure | |
| 506 | |
|
318
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
507 bcf neg_flag_velocity |
|
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
508 btfsc neg_flag |
|
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
509 bsf neg_flag_velocity |
|
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
510 |
| 0 | 511 movff sub_c+0,xA+0 |
| 512 movff sub_c+1,xA+1 | |
| 513 movlw d'39' ; 77 when called every second.... | |
| 514 movwf xB+0 | |
| 515 clrf xB+1 | |
| 516 call mult16x16 ; differential pressure in mbar*77... | |
| 517 movff xC+0,divA+0 | |
| 518 movff xC+1,divA+1 | |
| 519 movlw d'7' | |
| 520 movwf divB+0 | |
| 521 call div16 ; devided by 2^7 equals velocity in m/min | |
| 522 | |
| 523 movlw d'99' | |
| 524 cpfsgt divA+0 ; limit to 99m/min | |
| 525 bra calc_velocity3 | |
| 526 movwf divA+0 ; divA=99 | |
| 527 | |
| 528 calc_velocity3: | |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
529 ; Copy old speeds |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
530 movff old_velocity+2,old_velocity+3 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
531 movff old_velocity+1,old_velocity+2 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
532 movff old_velocity+0,old_velocity+1 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
533 movff divA+0,old_velocity+0 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
534 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
535 ; movff old_velocity+3,WREG |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
536 ; addwf divA+0,F ; add old speed |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
537 ; bcf STATUS,C |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
538 ; rrcf divA+0,F ; /2 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
539 ; movff old_velocity+2,WREG |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
540 ; addwf divA+0,F ; add old speed |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
541 ; bcf STATUS,C |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
542 ; rrcf divA+0,F ; /2 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
543 ; movff old_velocity+1,WREG |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
544 ; addwf divA+0,F ; add old speed |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
545 ; bcf STATUS,C |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
546 ; rrcf divA+0,F ; /2 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
547 ; movff old_velocity+0,WREG |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
548 ; addwf divA+0,F ; add old speed |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
549 ; bcf STATUS,C |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
550 ; rrcf divA+0,F ; /2 |
| 428 | 551 goto TFT_display_velocity ; With divA+0 = m/min..., and return... |
| 0 | 552 |
| 553 | |
| 554 ;============================================================================= | |
| 555 | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
556 set_reset_safety_stop: ; Set flags for safety stop and/or reset safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
557 TSTOSS opt_enable_safetystop ; =1: A safety stop is shown |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
558 bra delete_safety_stop ; No, don't show safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
559 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
560 btfsc decostop_active ; Is a deco stop displayed? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
561 bra delete_safety_stop ; Yes, don't show safety stop |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
562 ; Below "opt_safety_stop_reset"? Set flag and reset count-down timer |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
563 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
564 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
565 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
566 movff hi,sub_a+1 |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
567 movff opt_safety_stop_reset,WREG ; [cbar] |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
568 mullw .10 ; mbar in PRODL:H |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
569 movff PRODL,sub_b+0 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
570 movff PRODH,sub_b+1 |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
571 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
572 btfss neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
573 bra reset_safety_stop ; Below 10m, reset safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
574 |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
575 ; Above "opt_safety_stop_end"? Clear flag. |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
576 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
577 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
578 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
579 movff hi,sub_a+1 |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
580 movff opt_safety_stop_end,WREG ; [cbar] |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
581 mullw .10 ; mbar in PRODL:H |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
582 movff PRODL,sub_b+0 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
583 movff PRODH,sub_b+1 |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
584 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
585 btfsc neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
586 bra delete_safety_stop ; Above 3m, remove safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
587 |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
588 ; Above "opt_safety_stop_start"? Activate safety stop |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
589 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
590 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
591 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
592 movff hi,sub_a+1 |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
593 movff opt_safety_stop_start,WREG ; [cbar] |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
594 mullw .10 ; mbar in PRODL:H |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
595 movff PRODL,sub_b+0 |
|
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
596 movff PRODH,sub_b+1 |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
597 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
598 btfsc neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
599 bra acivate_safety_stop ; Above 5m, activate safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
600 bra reset_safety_stop2 ; Pause safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
601 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
602 acivate_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
603 tstfsz safety_stop_countdown ; Countdown at zero? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
604 bsf show_safety_stop ; No, Set flag! |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
605 return |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
606 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
607 delete_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
608 clrf safety_stop_countdown ; reset timer |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
609 bra reset_safety_stop2 ; Remove safety stop from display |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
610 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
611 reset_safety_stop: |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
612 movff opt_safety_stop_length,safety_stop_countdown ; reset timer |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
613 reset_safety_stop2: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
614 bcf show_safety_stop ; Clear flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
615 btfss safety_stop_active ; Safety stop shown |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
616 return ; No, don't delete it |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
617 bcf safety_stop_active ; Clear flag |
| 428 | 618 goto TFT_clear_safety_stop ; Clear safety stop, and return... |
| 619 | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
620 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
621 ;============================================================================= |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
622 |
| 0 | 623 timeout_menuview: |
| 624 decfsz timeout_counter3,F ; timeout for menuview | |
| 625 return ; No timeout, return | |
| 626 ; Timeout, clear e.g. "Menu?" | |
| 627 goto menuview_toggle_reset ; "returns" | |
| 628 | |
| 629 timeout_divemode_menu: | |
| 630 decfsz timeout_counter3,F ; timeout for divemode menu | |
| 631 return | |
| 632 | |
| 633 global timeout_divemode_menu2 | |
| 634 timeout_divemode_menu2: ; Called from divemenu_tree.asm | |
| 635 bcf divemode_menu ; Timeout! Clear flag | |
| 636 call TFT_clear_divemode_menu ; Clear menu | |
| 637 call TFT_active_gas_divemode ; Redraw gas/setpoint/diluent | |
| 638 bcf blinking_better_gas ; Clear flag to have temperature updated once | |
| 639 call TFT_temp_divemode ; Displays temperature | |
|
315
4f83470dcece
VSIbar #3: remaining changes for the split style bar
Janos Kovacs <kovjanos@gmail.com>
parents:
310
diff
changeset
|
640 call TFT_draw_gassep_line ; Gas separator grid in spec mode only |
| 0 | 641 |
| 642 btfss decostop_active ; In deco mode ? | |
| 643 bra timeout_divemode_menu_ndl ; No, show NDL again | |
| 644 ; Show deco | |
| 645 call TFT_display_deko_mask ; clear nostop time, display decodata | |
| 646 call TFT_display_deko | |
| 428 | 647 goto TFT_show_TTS_divemode; and return... |
| 648 | |
| 0 | 649 timeout_divemode_menu_ndl: ; Show NDL |
| 650 call TFT_display_ndl_mask ; Clear deco data, display nostop time | |
| 428 | 651 goto TFT_display_ndl; and return... |
| 0 | 652 |
| 653 timeout_divemode: | |
| 654 btfsc divemode_menu ; Divemode menu active? | |
| 655 rcall timeout_divemode_menu ; Yes, check the timeout for it... | |
| 656 | |
| 657 btfsc menuview ; is a menuview shown? | |
| 658 rcall timeout_menuview ; Yes, check the timeout for it... | |
| 659 | |
| 660 btfss realdive ; Dive longer then one minute | |
| 661 return | |
| 662 | |
| 663 btfsc FLAG_apnoe_mode ; In Apnoe mode? | |
|
35
eca4a201d8cf
change apnea timeout, do no longer store apnea dives in logbook
heinrichsweikamp
parents:
23
diff
changeset
|
664 bra timeout_divemode2 ; Yes, use apnoe_timeout [min] for timeout |
| 0 | 665 |
| 666 ifndef __DEBUG | |
| 667 btfsc simulatormode_active ; In Simulator mode? | |
| 668 bra timeout_divemode3 ; Yes, use simulator timeout | |
| 669 endif | |
| 670 | |
| 671 bcf divemode | |
| 148 | 672 infsnz timeout_counter,F |
| 673 incf timeout_counter2,F ; timeout is 15bits | |
| 0 | 674 |
|
444
d93d75ae01bf
Adjustable timeout for Divemode (Config 0x48)
heinrichsweikamp
parents:
437
diff
changeset
|
675 movff opt_diveTimeout,WREG ; in [min] |
|
d93d75ae01bf
Adjustable timeout for Divemode (Config 0x48)
heinrichsweikamp
parents:
437
diff
changeset
|
676 mullw .60 |
|
d93d75ae01bf
Adjustable timeout for Divemode (Config 0x48)
heinrichsweikamp
parents:
437
diff
changeset
|
677 movff PRODL,sub_a+0 |
|
d93d75ae01bf
Adjustable timeout for Divemode (Config 0x48)
heinrichsweikamp
parents:
437
diff
changeset
|
678 movff PRODH,sub_a+1 ; in [s] |
| 0 | 679 |
| 680 movff timeout_counter, sub_b+0 | |
| 681 movff timeout_counter2, sub_b+1 | |
| 682 call subU16 ; sub_c = sub_a - sub_b | |
| 683 btfss neg_flag ; Result negative? | |
| 684 bsf divemode ; No, set flag | |
| 685 return | |
| 686 | |
| 687 timeout_divemode2: | |
| 688 incf timeout_counter,F ; seconds... | |
| 689 movlw d'60' | |
| 690 cpfseq timeout_counter ; timeout_counter=60? | |
| 691 return ; No. | |
| 692 ; One minute timeout done. | |
| 693 clrf timeout_counter | |
| 694 bcf divemode | |
| 695 incf apnoe_timeout_counter,F | |
| 696 movlw apnoe_timeout ; apnoe timeout [min] | |
| 697 cpfseq apnoe_timeout_counter | |
| 698 bsf divemode | |
| 699 return | |
| 700 | |
| 701 timeout_divemode3: | |
| 702 bcf divemode | |
| 703 incf timeout_counter,F | |
| 704 movlw simulator_timeout ; simulator timeout | |
| 705 cpfsgt timeout_counter | |
| 706 bsf divemode | |
| 707 return | |
| 708 | |
| 709 update_temp_and_or_depth: ; New sensor data arrived... | |
| 710 btfsc temp_changed | |
| 711 call TFT_temp_divemode ; Displays temperature | |
| 712 | |
| 713 btfsc pressure_refresh | |
| 714 call TFT_depth ; Displays new depth | |
| 715 | |
| 716 rcall set_max_depth ; update max. depth if required | |
| 717 bcf pressure_refresh ; until new pressure is available | |
| 718 return | |
| 719 | |
| 720 update_divemode60: ; update any minute | |
| 721 call get_battery_voltage ; gets battery voltage | |
| 218 | 722 rcall set_powersafe ; Battery low? |
| 0 | 723 call TFT_max_pressure ; Update max. depth |
| 724 call customview_minute ; Do every-minute tasks for the custom view area | |
| 725 bcf oneminupdate | |
| 726 | |
| 727 btfss simulatormode_active ; in simulator mode? | |
| 728 return ; No | |
| 729 ; Yes, quite dive mode simulation after 21*256s=89min:36s | |
| 730 movlw .20 | |
| 731 cpfsgt total_divetime_seconds+1 ; Timeout? | |
| 732 return ; No | |
| 733 ifdef __DEBUG | |
| 734 return ; No simulator timeout in debug mode | |
| 735 endif | |
| 736 bra divemode_option1 ; Yes, set to 0m and "return" | |
| 737 | |
| 738 set_max_depth: | |
| 739 movff max_pressure+0,sub_a+0 | |
| 740 movff max_pressure+1,sub_a+1 | |
| 741 SAFE_2BYTE_COPY rel_pressure, sub_b | |
| 742 call subU16 ; sub_c = sub_a - sub_b | |
| 743 ; max_pressure<rel_pressure -> neg_flag=1 | |
| 744 ; rel_pressure<=max_pressure -> neg_flag=0 | |
| 745 btfss neg_flag | |
| 746 return | |
| 747 ; max_pressure<rel_pressure | |
| 748 movff sub_b+0,max_pressure+0 | |
| 749 movff sub_b+1,max_pressure+1 | |
| 428 | 750 goto TFT_max_pressure ; No, use normal max. depth; and return... |
| 0 | 751 |
| 752 set_min_temp: | |
| 753 movff minimum_temperature+0,sub_a+0 | |
| 754 movff minimum_temperature+1,sub_a+1 | |
| 755 SAFE_2BYTE_COPY temperature,sub_b | |
| 756 call sub16 ; sub_c = sub_a - sub_b | |
| 757 ; minimum_temperature<T -> neg_flag=1 | |
| 758 ; T<=minimum_temperature -> neg_flag=0 | |
| 759 btfsc neg_flag | |
| 760 return | |
| 761 ; minimum_temperature>=T | |
| 762 movff sub_b+0,minimum_temperature+0 | |
| 763 movff sub_b+1,minimum_temperature+1 | |
| 764 return | |
| 765 | |
| 766 global set_dive_modes | |
| 767 set_dive_modes: | |
| 768 btfsc high_altitude_mode ; In high altitude (Fly) mode? | |
| 769 bra set_dive_modes3 ; Yes! | |
| 770 | |
| 771 set_dive_modes0: | |
| 772 movlw LOW start_dive_threshold | |
| 773 movwf sub_a+0 ; dive_treshold is in cm | |
| 774 movlw HIGH start_dive_threshold | |
| 775 movwf sub_a+1 ; dive_treshold is in cm | |
| 776 | |
| 777 set_dive_modes1: | |
| 778 SAFE_2BYTE_COPY rel_pressure, sub_b | |
| 779 call subU16 ; sub_c = sub_a - sub_b | |
| 780 | |
| 781 btfss neg_flag | |
| 782 bra set_dive_modes2 ; too shallow (rel_pressure<dive_threshold) | |
| 783 | |
| 784 btfsc realdive ; Dive longer than one minute? | |
| 785 clrf timeout_counter ; Yes, reset timout counter | |
| 786 | |
| 787 bsf divemode ; (Re-)Set divemode flag | |
| 788 bsf divemode2 ; displayed divetime is running | |
| 789 return | |
| 790 | |
| 791 set_dive_modes2: | |
| 792 bcf divemode2 ; Stop time | |
| 793 btfss realdive ; dive longer then one minute? | |
| 794 bcf divemode ; no -> this was no real dive | |
| 795 return ; No, return | |
| 796 | |
| 797 | |
| 798 set_dive_modes3: ; High-altitude mode | |
| 799 btfsc realdive ; dive longer then one minute? | |
| 800 bra set_dive_modes0 ; Yes -> this is a real dive -> Use start_dive_threshold or ascend | |
| 801 | |
| 802 movlw HIGH high_altitude_dive_threshold | |
| 803 movwf sub_a+1 | |
| 804 movlw LOW high_altitude_dive_threshold | |
| 805 movwf sub_a+0 | |
| 806 bra set_dive_modes1 | |
| 807 | |
| 808 set_powersafe: | |
| 809 movlw color_code_battery_low+1; [%] | |
| 810 cpfslt batt_percent | |
| 811 return | |
| 812 | |
| 813 movlw d'7' ; Type of Alarm (Battery Low) | |
| 814 movwf AlarmType ; Copy to Alarm Register | |
| 815 bsf event_occured ; Set Event Flag | |
| 816 movlw .0 | |
| 817 movff WREG,opt_brightness ; Set Brightness to ECO | |
| 818 return ; return | |
| 819 | |
| 820 calc_average_depth: | |
| 176 | 821 btfsc reset_average_depth ; Reset the Average depth? |
| 0 | 822 rcall reset_average1 ; Reset the resettable average depth |
| 823 | |
| 824 ; 1. Add new 2xdepth to the Sum of depths registers | |
| 825 SAFE_2BYTE_COPY rel_pressure, xB ; Buffer... | |
| 826 bcf STATUS,C | |
| 827 rlcf xB+0,F | |
| 828 rlcf xB+1,F ; x2 | |
| 829 | |
| 830 movf xB+0,w | |
| 831 addwf average_depth_hold+0,F | |
| 832 movf xB+1,w | |
| 833 addwfc average_depth_hold+1,F | |
| 834 movlw d'0' | |
| 835 addwfc average_depth_hold+2,F | |
| 836 addwfc average_depth_hold+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 837 | |
| 838 ; Do the same for the _total registers (Non-Resettable) | |
| 839 movf xB+0,w | |
| 840 addwf average_depth_hold_total+0,F | |
| 841 movf xB+1,w | |
| 842 addwfc average_depth_hold_total+1,F | |
| 843 movlw d'0' | |
| 844 addwfc average_depth_hold_total+2,F | |
| 845 addwfc average_depth_hold_total+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 846 | |
| 847 ; 2. Compute Average Depth on base of average_divesecs:2 | |
| 848 movff average_divesecs+0,xB+0 | |
| 849 movff average_divesecs+1,xB+1 ; Copy | |
| 850 movff average_depth_hold+0,xC+0 | |
| 851 movff average_depth_hold+1,xC+1 | |
| 852 movff average_depth_hold+2,xC+2 | |
| 853 movff average_depth_hold+3,xC+3 | |
| 854 | |
| 855 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder | |
| 437 | 856 movff xC+0,avg_rel_pressure+0 |
| 857 movff xC+1,avg_rel_pressure+1 | |
| 0 | 858 |
|
89
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
859 btfss divemode2 ; displayed divetime is running? |
|
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
860 return ; No (e.g. too shallow) |
|
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
861 |
| 0 | 862 ; 3. Compute Total Average Depth on base of total_divetime_seconds:2 |
| 863 movff total_divetime_seconds+0,xB+0 | |
| 864 movff total_divetime_seconds+1,xB+1 ; Copy | |
| 865 movff average_depth_hold_total+0,xC+0 | |
| 866 movff average_depth_hold_total+1,xC+1 | |
| 867 movff average_depth_hold_total+2,xC+2 | |
| 868 movff average_depth_hold_total+3,xC+3 | |
| 869 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder | |
| 437 | 870 movff xC+0,avg_rel_pressure_total+0 |
| 871 movff xC+1,avg_rel_pressure_total+1 | |
| 0 | 872 return |
| 873 | |
| 874 reset_average1: | |
| 875 clrf average_depth_hold+0 | |
| 876 clrf average_depth_hold+1 | |
| 877 clrf average_depth_hold+2 | |
| 878 clrf average_depth_hold+3 ; Clear average depth register | |
| 879 movlw d'2' | |
| 880 movwf average_divesecs+0 | |
| 881 clrf average_divesecs+1 | |
| 882 bcf reset_average_depth ; Clear flag | |
| 883 return | |
| 884 | |
| 885 test_switches_divemode: ; checks switches in divemode | |
| 886 btfsc divemode_menu ; Divemode menu shown? | |
| 887 bra test_switches_divemode_menu ; Yes, use menu processor | |
| 888 btfsc switch_left | |
| 428 | 889 goto menuview_toggle ; Menu or Simulator tasks; and return...; bra test_switches_divemode2 ; Enter button pressed, check if we need to do something |
| 0 | 890 btfss switch_right |
| 891 return ; No button press | |
| 892 tstfsz menupos2 ; any option shown? | |
| 893 bra test_switches_divemode1 ; Yes, do option tasks | |
| 894 bsf toggle_customview ; No, toggle custom view | |
| 895 return | |
| 896 | |
| 897 test_switches_divemode_menu: | |
| 898 btfsc switch_left | |
| 899 bra test_switches_divemode_menu2 ; Move cursor | |
| 900 btfsc switch_right | |
| 901 bra test_switches_divemode_menu3 ; Enter submenu or do something | |
| 902 return ; No button press | |
| 903 | |
| 904 test_switches_divemode_menu1: | |
| 905 clrf menupos | |
| 906 test_switches_divemode_menu2: | |
| 907 incf menupos,F | |
| 908 incf menupos4,W ; menupos4+1 -> WREG | |
| 909 cpfslt menupos ; >menupos4 (Set in menu_processor.asm)? | |
| 910 bra test_switches_divemode_menu1; > Yes, set to 1 | |
| 911 call TFT_divemode_menu_cursor ; Update the cursor | |
| 912 bcf switch_left | |
| 913 movlw divemode_menu_timeout ; Reload timeout | |
| 914 movwf timeout_counter3 ; timeout for divemode menu | |
| 915 return | |
| 916 | |
| 917 test_switches_divemode_menu3: ; Enter submenu or do something | |
| 918 bcf switch_right | |
| 919 ; decf menupos,F ; menu_processor needs 0-5... | |
| 920 extern do_line_menu | |
| 921 goto do_line_menu ; Warning! Trashes STKPTR and returns to diveloop_loop4: | |
| 922 | |
| 923 test_switches_divemode1: | |
| 924 bcf switch_right | |
| 925 movlw divemode_menuview_timeout | |
| 926 movwf timeout_counter3 ; Reload timeout | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
927 movff menupos2,WREG ; menupos2 holds number of customview/divemode menu function |
| 0 | 928 dcfsnz WREG,F |
| 137 | 929 bra divemode_option_gaschange ; Switch to the indicated "better gas" |
| 930 dcfsnz WREG,F | |
| 0 | 931 bra divemode_option0 ; Start/Setup Divemode menu |
| 932 dcfsnz WREG,F | |
| 933 bra divemode_option1 ; Quit Simulation? | |
| 934 dcfsnz WREG,F | |
| 935 bra divemode_option2 ; Descent 1m | |
| 936 dcfsnz WREG,F | |
| 937 bra divemode_option3 ; Ascend 1m | |
| 938 dcfsnz WREG,F | |
| 939 bra divemode_option4 ; Quit Apnoe mode | |
| 940 dcfsnz WREG,F | |
| 941 bra divemode_option5 ; Reset Stopwatch (In Gauge mode) | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
942 dcfsnz WREG,F |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
943 bra divemode_option6 ; +5mins simulation |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
944 dcfsnz WREG,F |
|
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
945 bra divemode_option7 ; Store heading |
| 0 | 946 return |
| 947 | |
| 428 | 948 ;test_switches_divemode2: |
| 949 ; goto menuview_toggle ; Menu or Simulator tasks; and return... | |
| 950 ; return | |
| 0 | 951 |
| 952 gas_switched_common: | |
|
99
87cc1adfe4da
show event "bailout" in the internal logbook
heinrichsweikamp
parents:
98
diff
changeset
|
953 bcf divemode_gaschange ; Clear flag |
|
87cc1adfe4da
show event "bailout" in the internal logbook
heinrichsweikamp
parents:
98
diff
changeset
|
954 |
|
274
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
955 tstfsz menupos ; menupos=0? |
|
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
956 bra $+4 ; No |
|
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
957 return ; Yes, do not switch gas (There is no Gas #0 !) |
|
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
958 |
| 0 | 959 decf menupos,W ; 1-5 -> 0-4 |
| 960 btfsc FLAG_ccr_mode ; Choose CC Diluents | |
| 961 rcall setup_dil_registers ; With WREG=Gas 0-4 | |
| 485 | 962 decf menupos,W ; 1-5 -> 0-4 |
| 963 btfsc FLAG_pscr_mode ; Choose CC Diluents | |
| 964 rcall setup_dil_registers ; With WREG=Gas 0-4 | |
|
506
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
965 ; OC mode? |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
966 btfsc FLAG_ccr_mode ; CCR? |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
967 bra gas_switched_common2 ; Yes |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
968 btfsc FLAG_pscr_mode ; PSCR? |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
969 bra gas_switched_common2 ; Yes |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
970 ; -> OC |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
971 decf menupos,W ; 1-5 -> 0-4 |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
972 rcall setup_gas_registers ; With WREG=Gas 0-4 |
|
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
973 gas_switched_common2: |
| 0 | 974 decf menupos,W ; 1-5 -> 0-4 |
| 975 btfsc is_bailout ; Choose OC Bailouts (OC Gases) | |
| 976 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 977 | |
| 978 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 979 clrf WREG | |
| 980 movff WREG,char_O_deco_status ; Restart decoplan computation | |
| 98 | 981 |
| 982 ; Set flags for profile recording | |
| 983 bsf event_occured ; Set global event byte | |
| 984 btfsc is_bailout ; Choose OC Bailouts (OC Gases) | |
| 985 bsf bailoutgas_event ; Bailout gas change | |
| 986 btfss is_bailout ; Choose OC Bailouts (OC Gases) | |
| 987 bsf stored_gas_changed ; OC gas change | |
| 0 | 988 return |
| 989 | |
| 990 global setup_gas_registers | |
| 991 setup_gas_registers: ; With WREG=Gas 0-4 | |
| 992 lfsr FSR1,opt_gas_O2_ratio+0 | |
| 993 movff PLUSW1,char_I_O2_ratio ; O2 (For ppO2 calculations) | |
| 994 lfsr FSR1,opt_gas_He_ratio+0 | |
| 995 movff PLUSW1,char_I_He_ratio ; He | |
|
507
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
996 lfsr FSR1,opt_gas_type |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
997 movff PLUSW1,active_gas_type ; 0=Disabled, 1=First, 2=Travel, 3=Deco for OC gases and 0=Disabled, 1=First, 2=Normal for diluents |
| 0 | 998 incf WREG,W ; Gas# 1-5 |
| 999 movff WREG,char_I_current_gas ; Set gas | |
| 1000 movff WREG,active_gas ; Set for logbook and display | |
| 1001 banksel char_I_O2_ratio | |
| 1002 movf char_I_O2_ratio,W ; Add O2... | |
| 1003 addwf char_I_He_ratio,W ; ...and He... | |
| 1004 sublw .100 ; ...subtract both from 100 | |
| 1005 movwf char_I_N2_ratio ; -> N2! | |
| 1006 banksel common | |
| 1007 return | |
| 1008 | |
| 1009 global setup_dil_registers | |
| 1010 setup_dil_registers: ; With WREG=dil 0-4 | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
1011 btfsc is_bailout |
|
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
1012 return ; Ignore in bailout |
| 0 | 1013 lfsr FSR1,opt_dil_O2_ratio+0 |
| 1014 movff PLUSW1,char_I_O2_ratio ; O2 (For ppO2 calculations) | |
| 1015 lfsr FSR1,opt_dil_He_ratio+0 | |
| 1016 movff PLUSW1,char_I_He_ratio ; He | |
|
507
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1017 lfsr FSR1,opt_dil_type |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1018 movff PLUSW1,active_gas_type ; 0=Disabled, 1=First, 2=Travel, 3=Deco for OC gases and 0=Disabled, 1=First, 2=Normal for diluents |
| 0 | 1019 incf WREG,W ; Gas# 1-5 |
| 1020 movff WREG,char_I_current_gas ; Set gas | |
| 1021 movff WREG,active_gas ; Set for logbook and display | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
1022 movff WREG,active_diluent ; As a backup when switching back from Bailout to CCR |
| 0 | 1023 banksel char_I_O2_ratio |
| 1024 movf char_I_O2_ratio,W ; Add O2... | |
| 1025 addwf char_I_He_ratio,W ; ...and He... | |
| 1026 sublw .100 ; ...subtract both from 100 | |
| 1027 movwf char_I_N2_ratio ; -> N2! | |
| 1028 banksel common | |
| 1029 return | |
| 1030 | |
| 137 | 1031 divemode_option_gaschange: ; Switch to the better gas |
| 1032 movff better_gas_number,menupos; 1-5 | |
| 1033 bsf divemode_gaschange ; Change the gas in the dive mode loop... | |
| 1034 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
|
138
2852b0bd6391
minor: some extra protection against wrong gas selection
heinrichsweikamp
parents:
137
diff
changeset
|
1035 bcf better_gas_available ; Clear flag immediately |
| 137 | 1036 return |
| 1037 | |
| 0 | 1038 divemode_option0: ; Start/Setup Divemode menu |
| 1039 call TFT_clear_divemode_menu ; Clear menu area | |
| 1040 bcf menuview | |
| 1041 extern do_main_divemenu | |
| 1042 call do_main_divemenu | |
| 1043 global divemode_option0_return | |
| 1044 divemode_option0_return: | |
| 1045 ; movlw .1 | |
| 1046 ; movwf menupos ; Set to first option in divemode menu | |
| 1047 call TFT_divemode_menu_cursor; Show the cursor | |
| 1048 movlw divemode_menu_timeout | |
| 1049 movwf timeout_counter3 ; timeout for divemode menu | |
| 1050 bsf divemode_menu ; Set flag | |
| 1051 clrf menupos2 ; Clear option counter | |
| 1052 bra diveloop_loop4 ; Goto back to diveloop (Menuprocessor trashes STKPTR!) | |
| 1053 | |
| 1054 divemode_option4: | |
| 1055 movlw d'58' ; two seconds left | |
| 1056 movwf timeout_counter | |
| 1057 movlw apnoe_timeout-1 ; apnoe timeout [min] | |
| 1058 movwf apnoe_timeout_counter | |
| 1059 btfss simulatormode_active ; in simulator mode? | |
| 1060 return ; No | |
| 1061 divemode_option1: ; Quit simulation mode | |
| 1062 banksel isr_backup | |
| 1063 movlw low .1000 | |
| 1064 movwf sim_pressure+0 | |
| 1065 movlw high .1000 | |
| 1066 movwf sim_pressure+1 ; Set to 0m -> End of Dive | |
| 1067 banksel common | |
| 1068 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
| 1069 | |
| 1070 btfss FLAG_apnoe_mode ; In Apnoe mode? | |
| 1071 return ; No | |
| 1072 movlw d'58' ; two seconds left | |
| 1073 movwf timeout_counter | |
| 1074 movlw apnoe_timeout-1 ; apnoe timeout [min] | |
| 1075 movwf apnoe_timeout_counter | |
| 1076 return | |
| 1077 | |
| 1078 divemode_option3: ; minus 1m | |
| 1079 banksel isr_backup | |
|
315
4f83470dcece
VSIbar #3: remaining changes for the split style bar
Janos Kovacs <kovjanos@gmail.com>
parents:
310
diff
changeset
|
1080 movlw d'100' |
| 0 | 1081 subwf sim_pressure+0 |
| 1082 movlw .0 | |
| 1083 subwfb sim_pressure+1 | |
| 1084 rcall divemode_simulator_check_limits | |
| 1085 banksel common | |
| 1086 return | |
| 1087 | |
| 1088 divemode_option2: ; plus 1m | |
| 1089 banksel isr_backup | |
|
315
4f83470dcece
VSIbar #3: remaining changes for the split style bar
Janos Kovacs <kovjanos@gmail.com>
parents:
310
diff
changeset
|
1090 movlw d'100' |
| 0 | 1091 addwf sim_pressure+0 |
| 1092 movlw .0 | |
| 1093 addwfc sim_pressure+1 | |
| 1094 rcall divemode_simulator_check_limits | |
| 1095 banksel common | |
| 1096 return | |
| 1097 | |
| 1098 divemode_option5: | |
| 1099 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
| 1100 bsf reset_average_depth ; Set Flag | |
| 1101 return | |
| 1102 | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1103 divemode_option6: |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1104 bcf divemode2 ; Stop divetime |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1105 movlw .5 |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1106 addwf divemins+0,F |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1107 movlw .0 |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1108 addwfc divemins+1,F ; Add 5 mins |
|
385
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1109 movlw LOW (.5*.60) |
|
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1110 addwf average_divesecs+0,F |
|
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1111 movlw HIGH (.5*.60) |
|
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1112 addwfc average_divesecs+1,F ; Add 5*60 seconds |
|
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1113 movlw LOW (.5*.60) |
|
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1114 addwf total_divetime_seconds+0,F |
|
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1115 movlw HIGH (.5*.60) |
|
b075fa71b659
BUGFIX: +5min for stopwatch during simulation did not work
heinrichsweikamp
parents:
382
diff
changeset
|
1116 addwfc total_divetime_seconds+1,F ; Add 5*60 seconds |
| 386 | 1117 ; 1. Add 300xdepth to the Sum of depths registers |
| 1118 SAFE_2BYTE_COPY rel_pressure, xB ; Buffer... | |
| 1119 movlw LOW (.5*.60) | |
| 1120 movwf xA+0 | |
| 1121 movlw HIGH (.5*.60) | |
| 1122 movwf xA+1 | |
| 1123 call mult16x16 ;xA*xB=xC | |
| 1124 | |
| 1125 movf xC+0,w | |
| 1126 addwf average_depth_hold+0,F | |
| 1127 movf xC+1,w | |
| 1128 addwfc average_depth_hold+1,F | |
| 1129 movf xC+2,w | |
| 1130 addwfc average_depth_hold+2,F | |
| 1131 movf xC+3,w | |
| 1132 addwfc average_depth_hold+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 1133 | |
| 1134 ; Do the same for the _total registers (Non-Resettable) | |
| 1135 movf xC+0,w | |
| 1136 addwf average_depth_hold_total+0,F | |
| 1137 movf xC+1,w | |
| 1138 addwfc average_depth_hold_total+1,F | |
| 1139 movf xC+2,w | |
| 1140 addwfc average_depth_hold_total+2,F | |
| 1141 movf xC+3,w | |
| 1142 addwfc average_depth_hold_total+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 1143 | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1144 movlw .5 |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1145 movwf up ; counter |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1146 ; 1min mode |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1147 divemode_option6_2: |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1148 movlw .1 |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1149 movff WREG,char_I_step_is_1min ; Force 1min mode |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1150 clrf TMR5L |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1151 clrf TMR5H ; 30,51757813µs/bit in TMR5L:TMR5H |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1152 call deco_calc_hauptroutine ; calc_tissue |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1153 movlb .1 |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1154 decfsz up,F ; Done? |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1155 bra divemode_option6_2 ; Not yet |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1156 bsf divemode2 ; continue divetime |
| 428 | 1157 goto menuview_toggle_reset ; and return... |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1158 |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1159 divemode_option7: |
|
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1160 ; Store heading for compass view |
| 255 | 1161 movff compass_heading_shown+0,compass_bearing+0 |
| 1162 movff compass_heading_shown+1,compass_bearing+1 | |
| 1163 bsf compass_bearing_set ; set flag | |
| 428 | 1164 goto menuview_toggle_reset ; Done and return... |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1165 |
| 0 | 1166 divemode_simulator_check_limits: |
| 1167 ; Check limits (150m and 0m) | |
| 1168 movlw LOW d'16000' ; Compare to 16bar=16000mbar (150m). | |
| 1169 subwf sim_pressure+0,W | |
| 1170 movlw HIGH d'16000' | |
| 1171 subwfb sim_pressure+1,W | |
| 1172 bnc divemode_simulator_check_limits2 ; No-carry = borrow = not deeper | |
| 1173 | |
| 1174 ; Too deep, limit to 150m | |
| 1175 movlw LOW d'16000' | |
| 1176 movwf sim_pressure+0 | |
| 1177 movlw HIGH d'16000' | |
| 1178 movwf sim_pressure+1 | |
| 1179 return | |
| 1180 divemode_simulator_check_limits2: | |
| 1181 movlw LOW d'1000' ; Compare to 1bar == 0m == 1000 mbar. | |
| 1182 subwf sim_pressure+0,W | |
| 1183 movlw HIGH d'1000' | |
| 1184 subwfb sim_pressure+1,W | |
| 1185 btfsc STATUS,C ; No-carry = borrow = not deeper. | |
| 1186 return ; Deeper than 0m == Ok. | |
| 1187 ; Too shallow, limit to 0m | |
| 1188 movlw LOW d'1000' | |
| 1189 movwf sim_pressure+0 | |
| 1190 movlw HIGH d'1000' | |
| 1191 movwf sim_pressure+1 | |
| 1192 return | |
| 1193 | |
| 1194 ;============================================================================= | |
| 1195 ; Compare all enabled gas in list, to see if a better one is available. | |
| 1196 ; | |
| 1197 ; Output: better_gas_available, better_gas_number | |
| 1198 ; | |
| 1199 check_gas_change: ; Checks if a better gas should be selected (by user) | |
| 1200 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1201 clrf better_gas_number ; Clear better gas register | |
| 1202 | |
| 1203 SAFE_2BYTE_COPY rel_pressure,xA | |
| 1204 movlw d'100' | |
| 1205 movwf xB+0 | |
| 1206 clrf xB+1 | |
| 1207 call div16x16 ; compute depth in full m -> result in xC+0 | |
| 1208 | |
|
506
b9f06f1a1f74
BUGFIX: PSCR mode "Better Gas" showed bailout gases instead of diluents
heinrichsweikamp
parents:
485
diff
changeset
|
1209 btfsc FLAG_pscr_mode ; In PSCR mode... |
| 485 | 1210 bra check_gas_change2 ; Yes, check for diluents |
| 0 | 1211 btfss FLAG_ccr_mode ; In CCR mode... |
| 1212 bra check_gas_change_OC_bail; No, check for OC or bailout | |
| 485 | 1213 check_gas_change2: |
| 0 | 1214 btfsc is_bailout ; Bailout? |
| 1215 bra check_gas_change_OC_bail; Yes, check for OC or bailout | |
| 1216 | |
| 1217 ; Check Diluents | |
|
160
99ac325586ce
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
heinrichsweikamp
parents:
152
diff
changeset
|
1218 bsf ccr_diluent_setup ; in CCR menus |
| 0 | 1219 movlw .0 |
| 1220 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1221 movlw .1 | |
| 1222 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1223 movlw .2 | |
| 1224 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1225 movlw .3 | |
| 1226 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1227 movlw .4 | |
| 1228 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1229 bra check_gas_change_exit | |
| 1230 | |
| 1231 check_gas_change_OC_bail: | |
|
160
99ac325586ce
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
heinrichsweikamp
parents:
152
diff
changeset
|
1232 bcf ccr_diluent_setup ; in OC menus |
| 0 | 1233 movlw .0 |
| 1234 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1235 movlw .1 | |
| 1236 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1237 movlw .2 | |
| 1238 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1239 movlw .3 | |
| 1240 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1241 movlw .4 | |
| 1242 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1243 ; bra check_gas_change_exit | |
| 1244 check_gas_change_exit: | |
| 1245 btfss better_gas_available ; Is a better gas available | |
| 1246 bcf blinking_better_gas ; No, Clear blinking flag | |
| 1247 btfss better_gas_available ; Is a better gas available | |
| 1248 clrf better_gas_number ; No, Clear better_gas_number (For gaslist display) | |
| 428 | 1249 goto TFT_active_gas_divemode ; Display gas/Setpoint and return... |
| 0 | 1250 |
| 1251 check_gas_common: ; With Gas 0-4 in WREG | |
| 1252 btfsc better_gas_available ; Better Gas already found? | |
| 1253 return ; Yes, return | |
| 1254 lfsr FSR1,opt_gas_type ; 0=Disabled, 1=First, 2=Travel, 3=Deco | |
| 1255 btfss PLUSW1,0 ; Test for Bit0 and 1 -> type=3 -> Deco | |
| 1256 return ; No | |
| 1257 btfss PLUSW1,1 ; Test for Bit0 and 1 -> type=3 -> Deco | |
| 1258 return ; No | |
| 1259 incf WREG,W ; 1-5 | |
| 1260 cpfseq active_gas ; is this gas currently selected? | |
| 1261 bra check_gas_common2 ; No | |
| 1262 return ; Yes, skip test for active gas | |
| 1263 check_gas_common2: | |
| 1264 decf WREG,W ; 0-4 | |
| 1265 movwf hi ; Save tested gas 0-4 | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
1266 lfsr FSR1,opt_OC_bail_gas_change |
| 0 | 1267 movff PLUSW1,lo ; Change depth into lo |
| 1268 movlw minimum_change_depth | |
| 1269 cpfsgt lo ; Change depth>minimum_change_depth? | |
| 1270 return ; No, Change depth not deep enough, skip! | |
| 1271 movf xC+0,W ; load depth in m into WREG | |
| 1272 cpfsgt lo ; gas_change_depth < current depth? | |
| 69 | 1273 bra check_gas_common3 ; No, check if we are within the better_gas_window_pos window |
| 1274 incf hi,W ; 1-5 | |
| 1275 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 1276 movlw better_gas_window_neg | |
| 1277 subwf lo,W ; Change depth-better_gas_window_neg | |
| 1278 cpfslt xC+0 ; current depth<Change depth-better_gas_window_neg? | |
| 1279 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1280 return | |
| 1281 | |
| 1282 check_gas_common3: | |
| 0 | 1283 incf hi,W ; 1-5 |
| 1284 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 69 | 1285 movlw better_gas_window_pos |
| 1286 addwf lo,W ; Change depth+better_gas_window_pos | |
| 1287 cpfsgt xC+0 ; current depth>Change depth+better_gas_window_pos? | |
| 1288 bra check_gas_common4 ; Ok, now check the better gas ppO2<opt_ppO2_max | |
| 1289 return | |
| 1290 | |
| 1291 check_gas_common4: | |
| 1292 movf hi,W ; 0-4 | |
| 1293 lfsr FSR1,char_I_deco_N2_ratio | |
| 1294 movff PLUSW1,lo ; N2 ratio into lo | |
| 1295 lfsr FSR1,char_I_deco_He_ratio | |
| 1296 movff PLUSW1,xB+0 ; He ratio into xB+0 | |
| 1297 movf xB+0,W | |
| 1298 addwf lo,F | |
| 1299 movlw .101 | |
| 1300 bcf STATUS,C | |
| 1301 subfwb lo,F ; O2 ratio in lo | |
| 1302 | |
| 1303 SAFE_2BYTE_COPY amb_pressure, xA | |
| 1304 movlw d'10' | |
| 1305 movwf xB+0 | |
| 1306 clrf xB+1 | |
| 1307 call div16x16 ; xC=p_amb/10 | |
| 1308 movff xC+0,xA+0 | |
| 1309 movff xC+1,xA+1 | |
| 1310 movff lo,xB+0 ; =O2 ratio | |
| 1311 clrf xB+1 | |
| 1312 call mult16x16 ; lo * p_amb/10 | |
| 1313 | |
| 1314 ; Check very high ppO2 manually | |
| 1315 tstfsz xC+2 ; char_I_O2_ratio * p_amb/10 > 65536, ppO2>6,55bar? | |
| 1316 return ; Done. | |
| 1317 ; Check if ppO2>3,30bar | |
| 1318 btfsc xC+1,7 | |
| 1319 return ; Done. | |
| 1320 | |
| 1321 ; ; Check for low ppo2 | |
| 1322 ; movff xC+0,sub_b+0 | |
| 1323 ; movff xC+1,sub_b+1 | |
| 1324 ; movff opt_ppO2_min,WREG | |
| 1325 ; mullw d'100' ; opt_ppO2_min*100 | |
| 1326 ; movff PRODL,sub_a+0 | |
| 1327 ; movff PRODH,sub_a+1 | |
| 1328 ; call subU16 | |
| 1329 ; btfss neg_flag | |
| 1330 ; return ; Done (Too low). | |
| 1331 | |
| 1332 ;check if we are within our warning thresholds! | |
| 1333 movff xC+0,sub_b+0 | |
| 1334 movff xC+1,sub_b+1 | |
|
507
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1335 movff opt_ppO2_max_deco,WREG ; PPO2 Max for MOD calculation and color coding in divemode |
| 69 | 1336 addlw .1 ; e.g. >1.60 |
| 1337 mullw d'100' ; opt_ppO2_max*100 | |
| 1338 movff PRODL,sub_a+0 | |
| 1339 movff PRODH,sub_a+1 | |
| 1340 call subU16 | |
| 1341 btfss neg_flag | |
| 0 | 1342 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 69 | 1343 return ; Done. |
| 0 | 1344 |
| 1345 check_dil_common: ; With Dil 0-4 in WREG | |
| 1346 btfsc better_gas_available ; Better Diluent already found? | |
| 1347 return ; Yes, return | |
| 1348 lfsr FSR1,opt_dil_type ; 0=Disabled, 1=First, 2=Normal | |
| 1349 tstfsz PLUSW1 ; =0? | |
| 1350 bra check_dil_common1 ; No | |
| 1351 return ; Yes, skip inactive diluents for test | |
| 1352 check_dil_common1: | |
| 1353 incf WREG,W ; 1-5 | |
| 1354 cpfseq active_gas ; is this diluent currently selected? | |
| 1355 bra check_dil_common2 ; No | |
| 1356 return ; Yes, skip test for active diluent | |
| 1357 check_dil_common2: | |
| 1358 decf WREG,W ; 0-4 | |
| 1359 movwf hi ; Save tested diluent 0-4 | |
| 1360 lfsr FSR1,char_I_dil_change | |
| 1361 movff PLUSW1,lo ; Change depth into lo | |
| 1362 movlw minimum_change_depth | |
| 1363 cpfsgt lo ; Change depth>minimum_change_depth? | |
| 1364 return ; No, Change depth not deep enough, skip! | |
| 1365 movf xC+0,W ; load depth in m into WREG | |
| 1366 cpfsgt lo ; gas_change_depth < current depth? | |
| 1367 return ; No, check next gas | |
| 1368 incf hi,W ; 1-5 | |
| 1369 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 69 | 1370 movlw better_gas_window_neg |
| 1371 subwf lo,W ; Change depth-better_gas_window_neg | |
| 1372 cpfslt xC+0 ; current depth<Change depth-better_gas_window_neg? | |
| 0 | 1373 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 1374 return | |
| 1375 | |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1376 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1377 ;============================================================================= |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1378 ; Check for Auto-SP |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1379 ; |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1380 check_dive_autosp: ; Check for Auto-SP |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1381 movff opt_ccr_mode,WREG ; =0: Fixed SP, =1: Sensor, =2: Auto SP |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1382 sublw .2 ; opt_ccr_mode = 2 (Auto SP)? |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1383 bz check_dive_autosp2 ; Yes, check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1384 return ; No, return for Sensor or Fixed mode |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1385 check_dive_autosp2: |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1386 SAFE_2BYTE_COPY rel_pressure,xA |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1387 movlw d'100' |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1388 movwf xB+0 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1389 clrf xB+1 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1390 call div16x16 ; compute depth in full m -> result in xC+0 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1391 ; Check SP2 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1392 btfsc sp2_switched ;=1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1393 bra check_dive_autosp3 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1394 movff char_I_setpoint_change+1,lo ; Get depth in m |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1395 tstfsz lo ; =0? |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1396 bra $+4 ; No, continue |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1397 bra check_dive_autosp3 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1398 decf lo,W ; -1 -> WREG |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1399 cpfsgt xC+0 ; Compare with depth |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1400 bra check_dive_autosp3 ; lower depth, do not switch |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1401 ; auto switch to SP2 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1402 movff char_I_setpoint_cbar+1, char_I_const_ppO2 ; Use SetPoint |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1403 rcall xmit_sp_set_flag |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1404 bsf sp2_switched ; Set flag |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1405 check_dive_autosp3: |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1406 ; Check SP3 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1407 btfsc sp3_switched ;=1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1408 bra check_dive_autosp4 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1409 movff char_I_setpoint_change+2,lo ; Get depth in m |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1410 tstfsz lo ; =0? |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1411 bra $+4 ; No, continue |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1412 bra check_dive_autosp4 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1413 decf lo,W ; -1 -> WREG |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1414 cpfsgt xC+0 ; Compare with depth |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1415 bra check_dive_autosp4 ; lower depth, do not switch |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1416 ; auto switch to SP3 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1417 movff char_I_setpoint_cbar+2, char_I_const_ppO2 ; Use SetPoint |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1418 rcall xmit_sp_set_flag |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1419 bsf sp3_switched ; Set flag |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1420 check_dive_autosp4: |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1421 ; Check SP4 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1422 btfsc sp4_switched ;=1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1423 bra check_dive_autosp5 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1424 movff char_I_setpoint_change+3,lo ; Get depth in m |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1425 tstfsz lo ; =0? |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1426 bra $+4 ; No, continue |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1427 bra check_dive_autosp5 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1428 decf lo,W ; -1 -> WREG |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1429 cpfsgt xC+0 ; Compare with depth |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1430 bra check_dive_autosp5 ; lower depth, do not switch |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1431 ; auto switch to SP4 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1432 movff char_I_setpoint_cbar+3, char_I_const_ppO2 ; Use SetPoint |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1433 rcall xmit_sp_set_flag |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1434 bsf sp4_switched ; Set flag |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1435 check_dive_autosp5: |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1436 ; Check SP5 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1437 btfsc sp5_switched ;=1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1438 bra check_dive_autosp6 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1439 movff char_I_setpoint_change+4,lo ; Get depth in m |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1440 tstfsz lo ; =0? |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1441 bra $+4 ; No, continue |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1442 bra check_dive_autosp6 ; Skip check |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1443 decf lo,W ; -1 -> WREG |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1444 cpfsgt xC+0 ; Compare with depth |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1445 bra check_dive_autosp6 ; lower depth, do not switch |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1446 ; auto switch to SP5 |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1447 movff char_I_setpoint_cbar+4, char_I_const_ppO2 ; Use SetPoint |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1448 rcall xmit_sp_set_flag |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1449 bsf sp5_switched ; Set flag |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1450 check_dive_autosp6: |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1451 return |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1452 |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1453 xmit_sp_set_flag: |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1454 movff char_I_const_ppO2,WREG |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1455 call transmit_setpoint ; Transmit current setpoint from WREG (in cbar) to external electronics |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1456 bsf setpoint_changed ; Set flag (For profile) |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1457 bsf event_occured ; Set global event byte |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1458 return |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1459 |
| 0 | 1460 ;============================================================================= |
| 1461 ; Setup everything to enter divemode. | |
| 1462 ; | |
| 1463 dive_boot_oc: | |
| 1464 extern get_first_gas_to_WREG | |
| 1465 call get_first_gas_to_WREG ; Gets first gas (0-4) into WREG | |
| 1466 movff WREG,char_I_first_gas ; Copy for compatibility | |
| 1467 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 197 | 1468 banksel char_I_first_gas |
| 1469 incf char_I_first_gas,F ; 0-4 -> 1-5 | |
| 1470 banksel common | |
| 0 | 1471 return |
| 1472 | |
| 1473 dive_boot_cc: | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1474 bcf is_bailout ; =1: Bailout |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1475 bcf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1476 bcf blinking_setpoint ; Reset blinking SP flag |
| 192 | 1477 call compute_ppo2 ; compute mv_sensorX and ppo2_sensorX arrays |
| 1478 bsf voting_logic_sensor1 | |
| 1479 bsf voting_logic_sensor2 | |
| 1480 bsf voting_logic_sensor3 | |
|
399
db25f2028074
CHANGE: New segmented speed graph in divemode
heinrichsweikamp
parents:
398
diff
changeset
|
1481 call divemode_setup_sensor_values ; setup sensor values |
| 192 | 1482 |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1483 ; Setup first SP for Fixed or Auto mode |
|
398
1f2e35f5a5aa
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
heinrichsweikamp
parents:
389
diff
changeset
|
1484 movff opt_ccr_mode,WREG ; =0: Fixed SP, =1: Sensor, =2: Auto SP |
|
1f2e35f5a5aa
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
heinrichsweikamp
parents:
389
diff
changeset
|
1485 sublw .1 ; opt_ccr_mode = 1 (Sensor)? |
|
1f2e35f5a5aa
BUGFIX: Make sure SP1 is always selected on start in Auto-SP mode
heinrichsweikamp
parents:
389
diff
changeset
|
1486 movff char_I_setpoint_cbar+0,char_I_const_ppO2 ; No, setup fixed Setpoint (Always start with SP1) |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1487 movff char_I_const_ppO2,WREG |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1488 call transmit_setpoint ; Transmit current setpoint from WREG (in cbar) to external electronics |
|
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
339
diff
changeset
|
1489 bsf setpoint_changed ; Set flag (For profile) |
|
338
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1490 bcf sp2_switched ; =1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1491 bcf sp3_switched ; =1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1492 bcf sp4_switched ; =1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1493 bcf sp5_switched ; =1: This setpoint has been autoselected already |
|
2811932b4e99
NEW: Mode Auto SP: Automatically switches the SP during descent (CC Mode)
heinrichsweikamp
parents:
337
diff
changeset
|
1494 |
| 0 | 1495 extern get_first_dil_to_WREG |
| 1496 call get_first_dil_to_WREG ; Gets first gas (0-4) into WREG | |
| 1497 movff WREG,char_I_first_gas ; Copy for compatibility | |
| 1498 rcall setup_dil_registers ; With WREG=Gas 0-4 | |
| 197 | 1499 banksel char_I_first_gas |
| 1500 incf char_I_first_gas,F ; 0-4 -> 1-5 | |
| 1501 banksel common | |
| 428 | 1502 goto calc_deko_divemode_sensor ; External sensor stuff and return... |
| 0 | 1503 |
| 1504 diveloop_boot: | |
| 1505 call restart_set_modes_and_flags | |
| 1506 | |
| 1507 call I2C_sleep_accelerometer ; Stop accelerometer | |
| 1508 call I2C_sleep_compass ; Stop compass | |
| 1509 | |
| 1510 clrf WREG | |
| 1511 movff WREG,max_pressure+0 ; clear some variables | |
| 1512 movff WREG,max_pressure+1 | |
| 1513 | |
| 1514 bcf use_agf ; Start with normal GF set | |
| 1515 bcf divemode_menu ; clear divemode menu flag | |
| 1516 movlw d'1' | |
| 1517 movwf apnoe_max_pressure+0 | |
| 1518 clrf apnoe_max_pressure+1 | |
| 386 | 1519 ; clrf apnoe_surface_mins |
| 1520 ; clrf apnoe_surface_secs | |
| 0 | 1521 clrf apnoe_mins |
| 1522 clrf divemins+0 | |
| 1523 clrf divemins+1 | |
|
389
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1524 |
|
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1525 ; Copy date and time for logbook |
|
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1526 movff year,start_year |
|
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1527 movff month,start_month |
|
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1528 movff day,start_day |
|
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1529 movff hours,start_hours |
|
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1530 movff mins,start_mins |
|
9175429bdeba
CHANGE: Logbook now shows end-of-dive date and time for dives made with firmware <1.92 indicated by an icon in the logbook
heinrichsweikamp
parents:
386
diff
changeset
|
1531 |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1532 bcf no_more_divesecs ; =1: Do no longer show seconds in divemode |
| 0 | 1533 bcf divemode_menu_active |
| 1534 clrf menupos | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1535 clrf menupos2 ; Reset to zero (Zero=no premenu or simulator task) |
| 0 | 1536 |
| 1537 btfss FLAG_ccr_mode | |
| 1538 rcall dive_boot_oc | |
| 1539 btfsc FLAG_ccr_mode | |
| 1540 rcall dive_boot_cc | |
| 485 | 1541 btfsc FLAG_pscr_mode |
| 1542 rcall dive_boot_cc | |
| 1543 | |
|
403
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1544 ; Copy opt_dil_types into backup (For "lost gas" feature) |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1545 movff opt_dil_type+0,opt_dil_type_backup+0 ; 0=Disabled, 1=First, 2=Normal |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1546 movff opt_dil_type+1,opt_dil_type_backup+1 ; 0=Disabled, 1=First, 2=Normal |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1547 movff opt_dil_type+2,opt_dil_type_backup+2 ; 0=Disabled, 1=First, 2=Normal |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1548 movff opt_dil_type+3,opt_dil_type_backup+3 ; 0=Disabled, 1=First, 2=Normal |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1549 movff opt_dil_type+4,opt_dil_type_backup+4 ; 0=Disabled, 1=First, 2=Normal |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1550 ; Copy opt_gas_types into backup (For "lost gas" feature) |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1551 movff opt_gas_type+0,opt_gas_type_backup+0 ; 0=Disabled, 1=First, 2=Travel, 3=Deco |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1552 movff opt_gas_type+1,opt_gas_type_backup+1 ; 0=Disabled, 1=First, 2=Travel, 3=Deco |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1553 movff opt_gas_type+2,opt_gas_type_backup+2 ; 0=Disabled, 1=First, 2=Travel, 3=Deco |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1554 movff opt_gas_type+3,opt_gas_type_backup+3 ; 0=Disabled, 1=First, 2=Travel, 3=Deco |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1555 movff opt_gas_type+4,opt_gas_type_backup+4 ; 0=Disabled, 1=First, 2=Travel, 3=Deco |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1556 ; Also copy change depths into backup (For "lost gas" feature) |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1557 movff opt_OC_bail_gas_change+0,opt_OC_bail_gas_change_backup+0 ; Gas change depths OC/Bailout |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1558 movff opt_OC_bail_gas_change+1,opt_OC_bail_gas_change_backup+1 ; Gas change depths OC/Bailout |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1559 movff opt_OC_bail_gas_change+2,opt_OC_bail_gas_change_backup+2 ; Gas change depths OC/Bailout |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1560 movff opt_OC_bail_gas_change+3,opt_OC_bail_gas_change_backup+3 ; Gas change depths OC/Bailout |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1561 movff opt_OC_bail_gas_change+4,opt_OC_bail_gas_change_backup+4 ; Gas change depths OC/Bailout |
|
6e60012bb3fc
NEW: "Lost Gas" feature allows disabling gases during the dive
heinrichsweikamp
parents:
399
diff
changeset
|
1562 |
| 0 | 1563 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 1564 clrf better_gas_number ; Clear better gas register | |
| 1565 | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1566 bcf show_safety_stop ;=1: Show the safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1567 clrf safety_stop_countdown ; Clear count-down |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1568 |
| 0 | 1569 clrf samplesecs |
| 1570 clrf apnoe_timeout_counter ; timeout in minutes | |
| 1571 clrf timeout_counter ; takes care of the timeout (Low byte) | |
| 1572 clrf timeout_counter2 ; takes care of the timeout (High byte) | |
| 1573 clrf AlarmType ; Clear all alarms | |
| 1574 bcf event_occured ; clear flag | |
| 1575 clrf total_divetime_seconds+1 | |
| 1576 clrf average_depth_hold_total+0 | |
| 1577 clrf average_depth_hold_total+1 | |
| 1578 clrf average_depth_hold_total+2 | |
| 1579 clrf average_depth_hold_total+3 ; Clear Non-Resettable Average | |
| 1580 rcall reset_average1 ; Reset the resettable average depth | |
| 1581 bcf decostop_active | |
| 1582 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 204 | 1583 call ghostwriter_short_header ; Write short header with divenumber into profile memory |
| 0 | 1584 |
| 1585 btfsc simulatormode_active | |
| 1586 bra diveloop_boot_1 | |
| 1587 ; Normal mode = Surface pressure is the pressure 30mn before dive. | |
| 1588 SAFE_2BYTE_COPY last_surfpressure_30min, int_I_pres_surface ;copy surfacepressure to deco routine | |
| 1589 SAFE_2BYTE_COPY last_surfpressure_30min, last_surfpressure ;copy surfacepressure to last_surfpressure for correct depth | |
| 1590 bra diveloop_boot_2 | |
| 1591 | |
| 1592 diveloop_boot_1: | |
| 1593 ; Simulator mode: Surface pressure is 1bar. | |
| 1594 movlw LOW .1000 | |
| 1595 movff WREG,int_I_pres_surface+0 ; LOW copy surfacepressure to deco routine | |
| 1596 movlw HIGH .1000 | |
| 1597 movff WREG,int_I_pres_surface+1 ; HIGH copy surfacepressure to deco routine | |
| 1598 | |
| 1599 diveloop_boot_2: | |
| 1600 SAFE_2BYTE_COPY temperature,minimum_temperature ; Reset Min-Temp registers | |
| 1601 | |
| 1602 ; Init profile recording parameters | |
|
23
e402813343b6
new option to switch samplingrate between 10s and 2s
heinrichsweikamp
parents:
0
diff
changeset
|
1603 movff samplingrate,samplesecs_value ; to avoid EEPROM access in the ISR |
| 0 | 1604 movlw div_temperature |
| 1605 movwf divisor_temperature ; load divisors for profile storage | |
| 1606 movlw div_deco | |
| 1607 movwf divisor_deco | |
| 1608 movlw div_gf | |
| 1609 movwf divisor_gf | |
| 1610 movlw div_ppo2_sensors | |
| 1611 movwf divisor_ppo2_sensors | |
| 1612 movlw div_decoplan | |
| 1613 movwf divisor_decoplan | |
| 1614 movlw div_cns | |
| 1615 movwf divisor_cns | |
| 1616 movlw div_tank | |
| 1617 movwf divisor_tank | |
| 1618 | |
| 1619 btfss FLAG_apnoe_mode ; In Apnoe mode? | |
|
102
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1620 bra divemode_boot1 |
| 0 | 1621 ; Overwrite some parameters in Apnoe mode.... |
| 1622 movlw samplingrate_apnoe | |
| 1623 movwf samplesecs_value ; to avoid EEPROM access in the ISR | |
|
102
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1624 divemode_boot1: |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1625 btfsc FLAG_ccr_mode ; =1: CCR mode (Fixed ppO2 or Sensor) active |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1626 bra divemode_boot2 |
| 485 | 1627 btfsc FLAG_pscr_mode |
| 1628 bra divemode_boot2 | |
| 1629 | |
|
102
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1630 ; in OC Mode, disable ppO2 logging |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1631 movlw .0 |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1632 movwf divisor_ppo2_sensors |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1633 divemode_boot2: |
| 0 | 1634 |
| 1635 bcf LEDg | |
| 1636 bcf LEDr | |
| 1637 bcf realdive | |
| 1638 btfss simulatormode_active ; do not disable in simulator mode! | |
| 1639 call disable_rs232 ; Disable RS232 | |
| 1640 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 1641 call enable_rs232 ; Also sets to speed_normal ... | |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1642 ; Reset divetime seconds |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1643 movlw .2 ; Start at 2seconds |
| 0 | 1644 movwf total_divetime_seconds+0 |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1645 movwf divesecs |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1646 movwf apnoe_secs |
| 0 | 1647 bsf divemode2 ; displayed divetime is running (Divetime starts HERE) |
| 1648 | |
| 1649 movff int_O_CNS_fraction+0,CNS_start+0 | |
| 1650 movff int_O_CNS_fraction+1,CNS_start+1 ; Save CNS value at beginning of dive | |
| 1651 movff char_O_relative_gradient_GF,GF_start ; Save GF value at beginning of dive | |
| 1652 return ; Done with divemode boot | |
| 1653 | |
| 1654 divemode_check_for_warnings: | |
| 131 | 1655 movlw .2 |
| 1656 cpfsgt warning_counter ; only two warnings active? | |
| 1657 bra divemode_check_for_warnings1 ; Yes, update every second | |
| 1658 | |
| 1659 btfss secs,0 ; Every two seconds... | |
| 1660 return | |
| 1661 btfss secs,1 ; Every four seconds... | |
| 0 | 1662 return |
| 1663 | |
| 131 | 1664 divemode_check_for_warnings1: |
| 0 | 1665 movf warning_counter_backup,W |
| 1666 cpfseq warning_counter ; warning_counter_backup = warning_counter? | |
| 1667 call TFT_clear_warning_text ; No, clear all warnings | |
| 1668 movff warning_counter,warning_counter_backup ; copy warning_counter | |
| 1669 | |
| 1670 bcf warning_active ; Clear flag | |
| 1671 clrf warning_counter ; Clear counter | |
| 1672 | |
| 1673 ; Warnings for all modes | |
| 1674 call check_warn_battery ; Check if the battery level should be displayed/warned | |
| 55 | 1675 call check_divetimeout ; Not actually a warning. Check and show the divemode timeout |
| 0 | 1676 |
| 1677 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 1678 bra divemode_check_for_warnings2 | |
| 1679 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 1680 bra divemode_check_for_warnings2 | |
| 1681 | |
| 1682 ; Warnings only in deco modes | |
| 1683 btfss FLAG_ccr_mode ; Don't check in CCR mode | |
| 1684 rcall check_ppO2 ; check ppO2 and displays warning, if required | |
| 485 | 1685 ; mH: PSCR handling missing here (Not critical but should be done...) |
| 1686 | |
| 0 | 1687 btfsc is_bailout ; But check in Bailout case... |
| 1688 rcall check_ppO2 ; check ppO2 and displays warning, if required | |
| 1689 rcall check_cns_violation ; Check CNS value and display it, if required | |
| 1690 btfsc decostop_active ; In deco mode? | |
| 1691 rcall check_and_store_gf_violation ; Yes, Sets warnings, if required | |
| 1692 btfsc decostop_active ; In deco mode? | |
| 1693 call TFT_ftts ; Show @+x time | |
| 1694 btfsc use_agf ; In aGF mode? | |
| 1695 rcall warn_agf ; Yes, show a warning for it | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1696 btfsc setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1697 rcall warn_fallback ; Show the warning |
| 0 | 1698 |
| 1699 divemode_check_for_warnings2: | |
| 1700 ; Display the warning icon? | |
| 1701 btfsc warning_active ; Any warning active? | |
| 1702 call TFT_divemode_warning ; Yes | |
| 1703 btfss warning_active ; Any warning active? | |
| 1704 call TFT_divemode_warning_clear ; No, clear warning icon | |
| 1705 | |
| 1706 ; Setup warning_page number | |
| 1707 incf warning_page,F | |
| 1708 bcf STATUS,C | |
| 1709 rlcf warning_page,W ; *2 | |
| 1710 cpfsgt warning_counter ; > warning_counter | |
| 1711 clrf warning_page ; No, clear | |
| 1712 | |
| 1713 ; Clear 2nd row of warnings if there is nothing to show (on this page) | |
| 1714 btfss second_row_warning ; =1: The second row contains a warning | |
| 1715 call TFT_clear_warning_text_2nd_row ; No, clear this row | |
| 1716 return ; Done. | |
| 1717 | |
| 1718 global check_warn_battery | |
| 1719 check_warn_battery: | |
| 1720 movff batt_percent,lo | |
|
472
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1721 movlw battery_show_level+1 |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1722 cpfslt lo |
| 0 | 1723 return ; No Display, no warning |
| 1724 ; Display Battery, but warn? | |
|
472
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1725 movff batt_percent,lo |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1726 movlw color_code_battery_low+1 |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1727 cpfsgt lo ; |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1728 bsf warning_active ; Set Warning flag |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1729 |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1730 movlw .4 |
| 473 | 1731 cpfseq menupos3 ; battery shown in Custom View 4? |
|
472
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1732 bra check_warn_battery2 ; No |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1733 return ; Yes, do not show twice (in custom view and in warning area) |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1734 check_warn_battery2: |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1735 incf warning_counter,F ; increase counter |
| 0 | 1736 call TFT_update_batt_percent_divemode ; Show percent |
|
472
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1737 return |
|
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1738 |
| 55 | 1739 check_divetimeout: |
| 1740 btfsc divemode2 | |
| 1741 return ; displayed divetime is not running | |
| 1742 incf warning_counter,F ; increase counter | |
| 386 | 1743 goto TFT_divetimeout ; Show timeout counter (and return) |
| 55 | 1744 |
| 1745 | |
| 0 | 1746 check_ppO2: ; check current ppO2 and display warning if required |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1747 btfss FLAG_pscr_mode |
| 485 | 1748 bra check_ppO2_non_pscr ; Non-PSCR modes... |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1749 ; in PSCR mode |
| 485 | 1750 btfsc is_bailout |
| 1751 bra check_ppO2_non_pscr ; Non-PSCR modes... | |
| 1752 | |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1753 call compute_pscr_ppo2 ; pSCR ppO2 into sub_c:2 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1754 movff sub_c+0,xA+0 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1755 movff sub_c+1,xA+1 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1756 movlw d'100' |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1757 movwf xB+0 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1758 clrf xB+1 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1759 call div16x16 ; /100 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1760 tstfsz xC+1 ; Is ppO2 > 2.55bar ? |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1761 setf xC+0 ; yes: bound to 2.55... better than wrap around. |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1762 movff xC+0,char_I_actual_ppO2 ; copy last ppO2 to buffer register (for pSCR CNS) |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1763 clrf xC+2 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1764 clrf xC+3 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1765 movff sub_c+0,xC+0 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1766 movff sub_c+1,xC+1 ; copy for comptibility |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1767 bra check_ppO2_check |
| 0 | 1768 |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1769 check_ppO2_non_pscr: |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1770 SAFE_2BYTE_COPY amb_pressure, xA |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1771 movlw d'10' |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1772 movwf xB+0 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1773 clrf xB+1 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1774 call div16x16 ; xC=p_amb/10 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1775 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1776 movff xC+0,xA+0 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1777 movff xC+1,xA+1 |
| 0 | 1778 movff char_I_O2_ratio,xB+0 ; =O2 ratio |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1779 clrf xB+1 |
|
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1780 call mult16x16 ; char_I_O2_ratio * p_amb/10 |
| 0 | 1781 |
|
480
ad8acade5567
NEW: PSCR mode (Passive semi-closed rebreather)
heinrichsweikamp
parents:
473
diff
changeset
|
1782 check_ppO2_check: |
| 0 | 1783 ; Check very high ppO2 manually |
| 1784 tstfsz xC+2 ; char_I_O2_ratio * p_amb/10 > 65536, ppO2>6,55bar? | |
| 1785 bra check_ppO2_1 ; Yes, display Value! | |
| 1786 ; Check if ppO2>3,30bar | |
| 1787 btfsc xC+1,7 | |
| 1788 bra check_ppO2_1 ; Yes! | |
| 1789 | |
| 1790 ; Check for low ppo2 | |
| 1791 movff xC+0,sub_b+0 | |
| 1792 movff xC+1,sub_b+1 | |
| 1793 movff opt_ppO2_min,WREG | |
| 1794 mullw d'100' ; opt_ppO2_min*100 | |
| 1795 movff PRODL,sub_a+0 | |
| 1796 movff PRODH,sub_a+1 | |
| 1797 call subU16 | |
| 1798 btfsc neg_flag | |
| 1799 bra check_ppO2_0 ; Not too low | |
| 1800 ; ppO2 low | |
|
376
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1801 rcall check_ppo2_display ; display if not already shown in custom view |
| 0 | 1802 movlw d'4' ; Type of Alarm (ppO2 low) |
| 1803 movwf AlarmType ; Copy to Alarm Register | |
| 1804 bsf event_occured ; Set Event Flag | |
| 1805 bsf warning_active ; Set Warning flag | |
| 1806 return ; Done. | |
| 1807 | |
| 1808 check_ppO2_0: | |
| 1809 ; Check if ppO2 should be displayed | |
|
335
3d43da7acfe1
Always show ppO2 (warning position, standard color) option
janos_kovacs <kovjanos@gmail.com>
parents:
318
diff
changeset
|
1810 movlw .0 |
|
3d43da7acfe1
Always show ppO2 (warning position, standard color) option
janos_kovacs <kovjanos@gmail.com>
parents:
318
diff
changeset
|
1811 TSTOSS opt_showppo2 ; 0=no, 1=always show |
| 0 | 1812 movlw ppo2_display_high |
| 1813 mullw d'100' ; ppo2_display_high*100 | |
| 1814 movff PRODL,sub_a+0 | |
| 1815 movff PRODH,sub_a+1 | |
| 1816 call subU16 | |
| 1817 btfss neg_flag | |
| 1818 return ; No Display, no warning | |
| 1819 ; Display ppO2, but warn? | |
|
376
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1820 rcall check_ppo2_display ; display if not already shown in custom view |
| 0 | 1821 |
| 1822 ;check if we are within our warning thresholds! | |
| 1823 movff xC+0,sub_b+0 | |
| 1824 movff xC+1,sub_b+1 | |
|
507
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1825 ;active_gas_type -> 0=Disabled, 1=First, 2=Travel, 3=Deco for OC gases and 0=Disabled, 1=First, 2=Normal for diluents |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1826 movff active_gas_type,xA+0 ; xA+0 used as temp here -> holds type |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1827 movff opt_ppO2_max_deco,xB+1 ; xB+1 used as temp here |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1828 movlw .3 |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1829 cpfseq xA+0 ; Deco? |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1830 movff opt_ppO2_max,xB+1 ; No, overwrite with travel/bottom max |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1831 movf xB+1,W ; Result in WREG |
|
4e6f5c36f4cc
NEW: Two ppO2 max settings. One for travel/bottom and one for deco gases
heinrichsweikamp
parents:
506
diff
changeset
|
1832 addlw .1 ; e.g. >1.60 |
| 0 | 1833 mullw d'100' ; opt_ppO2_max*100 |
| 1834 movff PRODL,sub_a+0 | |
| 1835 movff PRODH,sub_a+1 | |
| 1836 call subU16 | |
| 1837 btfss neg_flag | |
| 1838 return ; Done. Not too high | |
| 1839 movlw d'5' ; Type of Alarm (ppO2 high) | |
| 1840 movwf AlarmType ; Copy to Alarm Register | |
| 1841 bsf event_occured ; Set Event Flag | |
| 1842 bsf warning_active ; Set Warning flag | |
| 1843 return ; Done. | |
| 1844 | |
| 1845 check_ppO2_1: ; ppO2 very high | |
|
376
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1846 rcall check_ppo2_display ; display if not already shown in custom view |
| 0 | 1847 movlw d'5' ; Type of Alarm |
| 1848 movwf AlarmType ; Copy to Alarm Register | |
| 1849 bsf event_occured ; Set Event Flag | |
| 1850 bsf warning_active ; Set Warning flag | |
| 1851 return ; Done. | |
| 1852 | |
|
376
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1853 check_ppo2_display: |
|
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1854 movlw .9 |
|
472
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1855 cpfseq menupos3 ; ppO2 shown in Custom View 9? |
|
376
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1856 bra check_ppO2_a ; No |
|
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1857 return ; Yes, do not show twice (in custom view and in warning area) |
|
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1858 check_ppO2_a: |
|
471
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1859 movlw .11 |
|
472
4fdf6886004b
CHANGE: Show warnings either in Customview (If active) _or_ next to warning sign
heinrichsweikamp
parents:
471
diff
changeset
|
1860 cpfseq menupos3 ; ppO2 shown in Custom View 11? |
|
471
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1861 bra check_ppO2_b ; No |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1862 return ; Yes, do not show twice (in custom view and in warning area) |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1863 check_ppO2_b: |
|
482
c0ee33f1f399
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
heinrichsweikamp
parents:
480
diff
changeset
|
1864 movlw .12 |
|
c0ee33f1f399
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
heinrichsweikamp
parents:
480
diff
changeset
|
1865 cpfseq menupos3 ; ppO2 shown in Custom View 12? |
|
c0ee33f1f399
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
heinrichsweikamp
parents:
480
diff
changeset
|
1866 bra check_ppO2_c ; No |
|
c0ee33f1f399
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
heinrichsweikamp
parents:
480
diff
changeset
|
1867 return ; Yes, do not show twice (in custom view and in warning area) |
|
c0ee33f1f399
New customview #12 for PSCR mode shows ppO2, O2 drop and lung ratio
heinrichsweikamp
parents:
480
diff
changeset
|
1868 check_ppO2_c: |
|
471
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1869 incf warning_counter,F ; increase counter |
| 386 | 1870 goto TFT_display_ppo2 ; Show ppO2 (and return) |
|
376
e99bb91f6f92
CHANGE: Do not show ppO2 in warning area if already shown in custom view
heinrichsweikamp
parents:
352
diff
changeset
|
1871 |
| 0 | 1872 global check_cns_violation |
| 1873 check_cns_violation: | |
| 1874 ; Check if CNS should be displayed | |
| 1875 movff int_O_CNS_fraction+1,lo ; copy into bank1 | |
| 1876 tstfsz lo ; >255% ? | |
| 1877 bra check_cns_violation2 ; Yes | |
| 1878 movff int_O_CNS_fraction+0,lo ; copy into bank1 | |
| 1879 | |
| 1880 movlw cns_warning_high ; cns_warning_high | |
| 1881 subwf lo,W | |
| 1882 btfsc STATUS,C | |
| 1883 bsf warning_active ; Set Warning flag | |
| 1884 | |
| 1885 movlw cns_display_high ; cns_display_high | |
| 1886 subwf lo,W | |
| 1887 btfss STATUS,C | |
| 1888 return ; No Display, no warning | |
| 1889 ; Display CNS | |
|
471
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1890 bra display_cns_violation |
| 0 | 1891 check_cns_violation2: |
|
471
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1892 bsf warning_active ; Set Warning flag |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1893 display_cns_violation: ; Show CNS if not shown in the custom view |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1894 movlw .11 |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1895 cpfseq menupos3 ; CNS shown in Custom View? |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1896 bra display_cns_violation2 ; No |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1897 return ; Yes, do not show twice (in custom view and in warning area) |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1898 display_cns_violation2: |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1899 incf warning_counter,F ; increase counter |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1900 goto TFT_display_cns ; Show CNS (and return) |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1901 |
|
9edb1359ce43
NEW: New Customview 11 in dive mode shows ppO2, EAD/END and CNS
heinrichsweikamp
parents:
444
diff
changeset
|
1902 |
| 0 | 1903 global check_and_store_gf_violation |
| 1904 check_and_store_gf_violation: | |
| 1905 movff char_O_gradient_factor,lo ; gradient factor absolute (Non-GF model) | |
| 1906 movff char_I_deco_model,hi | |
| 1907 decfsz hi,F ; jump over next line if char_I_deco_model == 1 | |
| 1908 movff char_O_relative_gradient_GF,lo ; gradient factor relative (GF model) | |
| 1909 | |
| 1910 movlw gf_warning_high | |
| 1911 cpfsgt lo | |
| 1912 bra check_and_store_gf_violation2 ; No warning | |
| 1913 movlw d'2' ; Type of Alarm | |
| 1914 movwf AlarmType ; Copy to Alarm Register | |
| 1915 bsf event_occured ; Set Event Flag | |
| 1916 bsf warning_active ; Set Warning flag | |
| 1917 check_and_store_gf_violation2: | |
| 1918 movlw gf_display_high | |
| 1919 cpfsgt lo | |
| 1920 return ; No Display, no warning | |
| 1921 ; Display GF | |
| 1922 incf warning_counter,F ; increase counter | |
| 386 | 1923 goto TFT_warning_gf ; Show GF Warning (and return) |
| 0 | 1924 |
| 1925 warn_agf: | |
| 1926 incf warning_counter,F ; increase counter | |
| 386 | 1927 goto TFT_warning_agf ; Show aGF warning (and return) |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1928 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1929 warn_fallback: |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1930 incf warning_counter,F ; increase counter |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1931 bsf warning_active ; Set Warning flag |
| 386 | 1932 goto TFT_warning_fallback ; Show fallback warning (and return) |
| 0 | 1933 |
| 1934 | |
| 1935 END |