Mercurial > public > hwos_code
annotate src/surfmode.asm @ 121:d519e24ef990
minor
| author | heinrichsweikamp |
|---|---|
| date | Fri, 27 Jun 2014 16:15:07 +0200 |
| parents | f3062a611eef |
| children | 939f1e83c4c2 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 3 ; File surfmode.asm | |
| 4 ; | |
| 5 ; Surfacemode | |
| 6 ; | |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 10 ; 2011-08-07 : [mH] moving from OSTC code | |
| 11 | |
| 12 #include "ostc3.inc" ; Mandatory header | |
| 13 #include "shared_definitions.h" ; Mailbox from/to p2_deco.c | |
| 14 #include "start.inc" | |
| 15 #include "tft.inc" | |
| 16 #include "tft_outputs.inc" | |
| 17 #include "isr.inc" | |
| 18 #include "adc_lightsensor.inc" | |
| 19 #include "menu_processor.inc" | |
| 20 #include "strings.inc" | |
| 21 #include "sleepmode.inc" | |
| 22 #include "wait.inc" ; speed_* | |
| 23 #include "external_flash.inc" | |
| 24 #include "customview.inc" | |
| 25 #include "divemode.inc" | |
| 26 #include "mcp.inc" ; RX | |
| 27 #include "i2c.inc" | |
| 28 #include "comm.inc" | |
| 29 #include "eeprom_rs232.inc" | |
| 113 | 30 #include "calibrate.inc" |
| 0 | 31 |
| 32 #DEFINE menu_pos_row .215 | |
| 33 #DEFINE menu_pos_column .0 | |
| 34 #DEFINE view_row .215 | |
| 35 #DEFINE view_column .124 | |
| 36 | |
| 37 extern do_main_menu | |
| 38 | |
| 39 gui CODE | |
| 40 | |
| 41 | |
| 42 ;============================================================================= | |
| 43 ; Boot tasks for all modes | |
| 44 global surfloop | |
| 45 surfloop: | |
| 46 call speed_normal | |
| 113 | 47 btfss c3_hardware |
| 48 call piezo_config ; Configure buttons | |
| 0 | 49 bcf no_sensor_int ; Normal pressure mode |
| 50 | |
| 51 clrf CCP1CON ; stop PWM | |
| 52 bcf PORTC,2 ; Pull PWM output to GND | |
| 53 call TFT_boot ; Initialize TFT (includes clear screen) | |
| 54 bcf restore_deco_data | |
| 55 | |
| 56 WIN_TOP .50 | |
| 57 WIN_LEFT .10 | |
| 58 movlw LOW 0x1E000 | |
| 59 movwf TBLPTRL | |
| 60 movlw HIGH 0x1E000 | |
| 61 movwf TBLPTRH | |
| 62 movlw UPPER 0x1E000 | |
| 63 movwf TBLPTRU | |
| 64 extern color_image | |
| 65 call color_image ; Show logo | |
| 66 | |
| 67 WIN_TOP .100 | |
| 68 WIN_LEFT .34 | |
| 69 extern ostc3_logo_block | |
| 70 movlw LOW(ostc3_logo_block) | |
| 71 movwf TBLPTRL | |
| 72 movlw HIGH ostc3_logo_block;&0xFFFF | |
| 73 movwf TBLPTRH | |
| 74 movlw UPPER(ostc3_logo_block) | |
| 75 movwf TBLPTRU | |
| 76 call color_image | |
| 77 call TFT_Display_FadeIn ; Show splash | |
| 78 call TFT_serial ; Show serial and firmware version | |
| 79 | |
| 80 ;---- Do any usefull initializes that takes time ------------------------- | |
| 81 call restart_set_modes_and_flags ; Sets decomode flags | |
| 82 ; call speed_fastest | |
| 83 bcf pressure_refresh | |
| 84 call I2C_init_compass | |
| 85 call I2C_init_accelerometer | |
| 86 clrf ext_flash_address+0 | |
| 87 clrf ext_flash_address+1 | |
| 88 clrf ext_flash_address+2 | |
| 89 | |
| 90 clrf timeout_counter2 | |
| 91 clrf timeout_counter3 | |
| 92 bcf menubit ; clear menu flag | |
| 93 clrf last_pressure+0 | |
| 94 clrf last_pressure+1 | |
| 95 bcf is_bailout ; =1: Bailout | |
| 96 bcf ccr_diluent_setup ; Use OC gases for gaslist routine | |
| 97 | |
| 98 bcf simulatormode_active ; Quit simulator mode (if active) | |
| 99 bcf switch_left | |
| 100 bcf switch_right | |
| 101 bcf LEDg | |
| 102 bcf LEDr | |
| 103 | |
| 104 ;---- Fade to standard surface view -------------------------------------- | |
| 105 ; Wait 1 second | |
| 106 bcf onesecupdate | |
| 107 btfss onesecupdate | |
| 108 bra $-2 | |
| 109 ; Wait 1 second | |
| 110 bcf onesecupdate | |
| 111 btfss onesecupdate | |
| 112 bra $-2 | |
| 113 | |
| 114 call TFT_Display_FadeOut ; Go to black screen | |
| 115 call TFT_ClearScreen ; Then change everything | |
| 116 WIN_TOP .0 | |
| 117 WIN_LEFT .0 | |
| 118 WIN_FONT FT_SMALL | |
| 119 WIN_INVERT .0 ; Init new Wordprocessor | |
| 120 | |
| 121 ; call TFT_user_image ; Show the user image/text | |
| 122 | |
| 123 WIN_COLOR color_lightblue | |
| 124 WIN_SMALL menu_pos_column,menu_pos_row | |
| 125 STRCPY_TEXT_PRINT tMenu ;"<Menu" | |
| 126 WIN_SMALL view_column,view_row | |
| 127 STRCPY_TEXT_PRINT tView ;"View>" | |
| 128 call TFT_standard_color | |
| 129 | |
| 130 call TFT_clock ; display time | |
| 131 call update_surfloop60 | |
| 132 call get_battery_voltage ; get battery voltage | |
| 133 call TFT_update_batt_voltage ; display battery voltage | |
| 134 call TFT_update_surf_press ; display surface pressure | |
| 135 call TFT_temp_surfmode ; Displays temperature | |
| 136 call TFT_display_decotype_surface | |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
137 movff customview_surfmode,menupos3 ; Reload last customview |
| 0 | 138 call surf_customview_mask ; Update #menupos3 view |
| 139 | |
| 48 | 140 ; Logo |
| 0 | 141 WIN_TOP .0 |
| 142 WIN_LEFT .70 | |
| 143 movlw LOW(ostc3_logo_block) | |
| 144 movwf TBLPTRL | |
| 145 movlw HIGH ostc3_logo_block;&0xFFFF | |
| 146 movwf TBLPTRH | |
| 147 movlw UPPER(ostc3_logo_block) | |
| 148 movwf TBLPTRU | |
| 149 call color_image | |
| 150 | |
| 151 btfsc FLAG_apnoe_mode ; Ignore in Apnoe mode | |
| 152 bra surfloop1 | |
| 153 btfsc FLAG_gauge_mode ; Ignore in Gauge mode | |
| 154 bra surfloop1 | |
| 155 | |
| 156 surfloop1: | |
| 157 call TFT_Display_FadeIn ; Display resulting surface screen. | |
| 158 | |
| 159 ;---- Late initialisations ----------------------------------------------- | |
| 160 movff last_surfpressure_30min+0,int_I_pres_respiration+0 ; copy surface air pressure to deco routine | |
| 161 movff last_surfpressure_30min+1,int_I_pres_respiration+1 ; 30min old values | |
| 162 movff last_surfpressure_30min+0,int_I_pres_surface+0 ; copy surface air pressure to deco routine | |
| 163 movff last_surfpressure_30min+1,int_I_pres_surface+1 ; 30min old values | |
| 164 movff last_surfpressure_30min+0,last_surfpressure+0 ; Use 30min old airpressure | |
| 165 movff last_surfpressure_30min+1,last_surfpressure+1 ; Use 30min old airpressure | |
| 166 | |
| 167 extern do_demo_divemode | |
| 168 ; goto do_demo_divemode | |
| 169 | |
| 170 ; Startup tasks for all modes | |
| 171 ; Desaturation time needs: | |
| 172 ; int_I_pres_surface | |
| 173 ; char_I_desaturation_multiplier | |
| 174 call deco_calc_desaturation_time ; calculate desaturation time | |
| 175 movlb b'00000001' ; select ram bank 1 | |
| 176 | |
| 177 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 178 call enable_rs232 ; Also sets to speed_normal ... | |
| 179 | |
| 113 | 180 ; call disable_ir |
| 181 ; bsf mcp_power | |
| 182 ; btfss mcp_power | |
| 183 ; bra $-4 | |
| 184 | |
| 0 | 185 surfloop_loop: |
| 186 btfss onesecupdate ; do every second tasks? | |
| 187 bra surfloop_loop2 ; no, loop | |
| 188 | |
| 189 ; One Second tasks for all modes | |
| 190 call speed_normal | |
| 191 call TFT_debug_output | |
| 192 call TFT_clock ; update clock | |
| 193 call timeout_surfmode ; check timeout | |
| 194 call get_battery_voltage ; get battery voltage | |
| 113 | 195 call compute_ppo2 ; compute mv_sensorX and ppo2_sensorX arrays |
| 0 | 196 call TFT_update_batt_voltage ; display battery voltage |
| 197 call set_dive_modes ; tests if depth>threshold | |
| 198 btfss secs,0 ; Every two seconds... | |
| 199 call TFT_temp_surfmode ; Displays temperature | |
| 200 btfss secs,0 ; Every two seconds... | |
| 201 call surfmode_check_for_warnings ; ... check for warnings (and display/update) them | |
| 202 | |
| 203 btfsc FLAG_ccr_mode ; In CCR mode... | |
| 204 call TFT_surface_hud ; ...update HUD data in surface mode | |
| 205 | |
| 206 bcf onesecupdate ; every second tasks done | |
| 207 | |
| 208 surfloop_loop2: | |
| 209 ; Tasks approx. every 50ms for all modes | |
| 210 call test_switches_surfmode ; check switches | |
| 211 call speed_normal | |
| 212 | |
| 213 ; One minute tasks for all modes | |
| 214 btfsc oneminupdate ; do every minute tasks | |
| 215 call update_surfloop60 ; yes, e.g. update time and date | |
| 216 | |
| 217 ; Mode tasks | |
| 218 btfsc menubit ; Menu? | |
| 219 goto do_main_menu ; Menu! | |
| 220 | |
| 221 btfsc pressure_refresh ; new pressure available? | |
| 222 call TFT_update_surf_press ; display surface pressure | |
| 223 bcf pressure_refresh ; until new pressure is available | |
| 224 | |
| 225 btfss quarter_second_update | |
| 226 bra surfloop_loop2a | |
| 227 bcf quarter_second_update | |
| 228 movlw .6 | |
| 229 cpfseq menupos3 ; in compass view? | |
| 230 bra surfloop_loop2a ; No | |
| 231 call TFT_surface_compass_heading ; Yes, update compass heading value | |
| 232 | |
| 233 surfloop_loop2a: | |
| 234 btfsc toggle_customview ; Next view? | |
| 235 call surf_customview_toggle ; Yes, show next customview (and delete this flag) | |
| 236 | |
| 237 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 238 bra surfloop_loop3 | |
| 239 btfsc vusb_in ; USB plugged in? | |
| 113 | 240 call comm_mode ; Start COMM mode |
| 0 | 241 bra surfloop_loop4 |
| 242 surfloop_loop3: | |
| 243 btfss vusb_in ; USB (still) plugged in? | |
| 244 bcf enable_screen_dumps ; No, clear flag | |
| 245 call rs232_get_byte | |
| 246 btfsc rs232_recieve_overflow | |
| 247 bra surfloop_loop4 | |
| 248 movlw "l" | |
| 249 cpfseq RCREG1 | |
| 250 bra surfloop_loop4 | |
| 251 call TFT_dump_screen ; Dump the screen contents | |
| 252 surfloop_loop4: | |
| 253 btfsc divemode ; Divemode active? | |
| 254 goto diveloop ; Yes, switch into Divemode! | |
| 255 btfsc sleepmode ; Sleepmode active? | |
| 256 goto sleeploop ; Yes, switch into sleepmode! | |
| 257 | |
| 258 bra surfloop_loop ; loop surfacemode | |
| 259 | |
| 260 update_surfloop60: | |
| 261 ; One minute tasks for all modes | |
| 262 call TFT_date ; Update date | |
| 263 call calc_deko_surfmode ; calculate desaturation every minute | |
| 264 bcf oneminupdate | |
| 265 return | |
| 266 | |
| 267 extern check_cns_violation,check_warn_battery,check_and_store_gf_violation | |
| 268 surfmode_check_for_warnings: | |
| 269 movf warning_counter_backup,W | |
| 270 cpfseq warning_counter ; warning_counter_backup = warning_counter? | |
| 271 call TFT_clear_warning_text ; No, clear all warnings | |
| 272 movff warning_counter,warning_counter_backup ; copy warning_counter | |
| 273 | |
| 274 bcf warning_active ; Clear flag | |
| 275 clrf warning_counter ; Clear counter | |
| 276 | |
| 277 ; Warnings for all modes | |
| 278 call check_warn_battery ; Check if the battery level should be displayed/warned | |
| 279 call surfmode_check_for_nofly ; Check if nofly time should be shown | |
| 280 call surfmode_check_for_desat ; Check if desat time should be shown | |
| 281 call surfmode_check_for_interval ; Check if surface interval should be shown | |
| 282 | |
| 283 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 284 bra surfmode_check_for_warnings2 | |
| 285 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 286 bra surfmode_check_for_warnings2 | |
| 287 | |
| 288 ; Warnings only in deco modes | |
| 289 call check_cns_violation ; Check CNS value and display it, if required | |
| 290 call check_and_store_gf_violation ; Check GF value and display it, if required | |
| 291 | |
| 292 surfmode_check_for_warnings2: | |
| 293 ; Setup warning_page number | |
| 294 incf warning_page,F | |
| 295 bcf STATUS,C | |
| 296 rlcf warning_page,W ; *2 | |
| 297 cpfsgt warning_counter ; > warning_counter | |
| 298 clrf warning_page ; No, clear | |
| 299 | |
| 300 ; Clear 2nd row of warnings if there is nothing to show (on this page) | |
| 301 btfss second_row_warning ; =1: The second row contains a warning | |
| 302 call TFT_clear_warning_text_2nd_row ; No, clear this row | |
| 303 return ; Done. | |
| 304 | |
| 305 surfmode_check_for_interval: | |
| 306 movf surface_interval+0,W ; Is interval null ? | |
| 307 iorwf surface_interval+0,W | |
| 308 bnz surfmode_check_for_interval2 ; No | |
| 309 return | |
| 310 surfmode_check_for_interval2: | |
| 311 incf warning_counter,F ; increase counter | |
| 312 call TFT_interval | |
| 313 return | |
| 314 | |
| 315 | |
| 316 surfmode_check_for_desat: | |
| 317 movf desaturation_time+0,W ; Is nofly null ? | |
| 318 iorwf desaturation_time+1,W | |
| 319 bnz surfmode_check_for_desat2 ; No | |
| 320 return | |
| 321 surfmode_check_for_desat2: | |
| 322 incf warning_counter,F ; increase counter | |
| 323 call TFT_desaturation_time | |
| 324 return | |
| 325 | |
| 326 surfmode_check_for_nofly: | |
| 327 movf nofly_time+0,W ; Is nofly null ? | |
| 328 iorwf nofly_time+1,W | |
| 329 bnz surfmode_check_for_nofly2 ; No... | |
| 330 return | |
| 331 surfmode_check_for_nofly2: | |
| 332 incf warning_counter,F ; increase counter | |
| 333 call TFT_nofly_time | |
| 334 return | |
| 335 | |
| 336 | |
| 337 ;============================================================================= | |
| 338 global calc_deko_surfmode | |
| 339 calc_deko_surfmode: | |
| 340 SAFE_2BYTE_COPY amb_pressure,int_I_pres_respiration ; copy surface air pressure to deco routine | |
| 341 call deco_calc_wo_deco_step_1_min ; calculate deco in surface mode | |
| 342 banksel common | |
| 343 return | |
| 344 | |
| 345 test_switches_surfmode: ; checks switches in surfacemode | |
| 346 btfsc switch_right | |
| 347 bra test_switches_surfmode2 | |
| 348 btfsc switch_left | |
| 349 bra test_switches_surfmode3 | |
| 350 | |
| 351 ; No button press | |
| 352 return | |
| 353 | |
| 354 test_switches_surfmode3: | |
| 355 bcf switch_left | |
| 356 bsf menubit ; Enter Menu! | |
| 357 return | |
| 358 | |
| 359 test_switches_surfmode2: | |
| 360 bcf switch_right | |
| 361 bsf toggle_customview | |
| 362 clrf timeout_counter2 ; and reset timeout | |
| 363 return | |
| 364 | |
| 365 global timeout_surfmode | |
| 366 timeout_surfmode: | |
| 367 movlw timeout_surfacemode ; [s] | |
| 368 global timeout_testmode | |
| 369 timeout_testmode: | |
| 370 incf timeout_counter2,F ; increase timeout counter | |
| 371 cpfsgt timeout_counter2 ; Compare with timeout_counter2 | |
| 372 return ; return, no timeout | |
| 373 bsf sleepmode ; Set Flag | |
| 374 return ; Return | |
| 375 | |
| 376 END |