Mercurial > public > hwos_code
annotate src/divemode.asm @ 165:9b82239fa062
testing consumption
| author | heinrichsweikamp |
|---|---|
| date | Thu, 11 Sep 2014 15:41:48 +0200 |
| parents | 99065ef2d18e |
| children | 8bcb064b4fb8 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 3 ; File divemode.asm | |
| 4 ; | |
| 5 ; Divemode | |
| 6 ; | |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 10 ; 2011-08-15 : [mH] moving from OSTC code | |
| 11 | |
| 12 #include "ostc3.inc" ; Mandatory header | |
| 13 #include "shared_definitions.h" ; Mailbox from/to p2_deco.c | |
| 14 #include "tft_outputs.inc" | |
| 15 #include "strings.inc" | |
| 16 #include "tft.inc" | |
| 17 #include "eeprom_rs232.inc" | |
| 18 #include "isr.inc" | |
| 19 #include "math.inc" | |
| 20 #include "wait.inc" | |
| 21 #include "customview.inc" | |
| 22 #include "start.inc" | |
| 23 #include "adc_lightsensor.inc" | |
| 24 #include "ghostwriter.inc" | |
| 25 #include "i2c.inc" | |
| 113 | 26 #include "calibrate.inc" |
| 0 | 27 |
| 28 gui CODE | |
| 29 | |
| 30 global diveloop | |
| 31 diveloop: | |
| 32 banksel common | |
| 33 call speed_normal | |
| 34 call diveloop_boot ; Boot tasks for all modes | |
| 35 | |
| 36 ; Startup Tasks for all modes | |
| 37 call TFT_ClearScreen ; clean up TFT | |
| 38 call TFT_divemode_mask ; Display mask | |
| 39 call TFT_temp_divemode ; Displays temperature | |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
40 movff customview_divemode,menupos3 ; Reload last customview |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
41 call customview_mask ; Redraw last custom view |
| 0 | 42 |
| 43 btfsc FLAG_apnoe_mode | |
| 44 bsf realdive ; Set Realdive flag in Apnoe mode | |
| 45 | |
| 46 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 47 bra diveloop_loop | |
| 48 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 49 bra diveloop_loop | |
| 50 | |
| 51 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 52 call TFT_display_ndl_mask ; display "NDL" | |
| 53 | |
| 54 ; +@5 init | |
| 55 setf WREG ; WAIT marker: display "---" | |
| 56 movff WREG,int_O_extra_ascenttime+0 | |
| 57 movff WREG,int_O_extra_ascenttime+1 | |
| 58 movlw 1 | |
| 59 movwf apnoe_mins ; Start compute after next cycle. | |
| 60 | |
| 61 ;-------------------------------------------------------------------------------------------------------- | |
| 62 diveloop_loop: ; The diveloop starts here | |
| 63 btfss onesecupdate | |
| 64 bra diveloop_loop3 | |
| 65 | |
| 66 ; tasks any new second... | |
| 67 btfsc FLAG_apnoe_mode ; Only in apnoe mode | |
| 68 bra diveloop_loop1b ; One Second Tasks in Apnoe mode | |
| 69 | |
| 70 call TFT_divemins ; Display (new) divetime! | |
| 71 call customview_second ; Do every-second tasks for the custom view area | |
| 131 | 72 call divemode_check_for_warnings ; Check for any warnings |
| 0 | 73 |
| 74 ; Tasks only for deco modes | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
75 btfsc show_safety_stop ; Show the safety stop? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
76 call TFT_show_safety_stop ; Yes, show/delete if done. |
| 0 | 77 call calc_deko_divemode ; calculate decompression and display result (any two seconds) |
| 78 bra diveloop_loop1x ; Common Tasks | |
| 79 | |
| 80 diveloop_loop1b: | |
| 81 ; Tasks only for Apnoe mode | |
| 131 | 82 rcall divemode_apnoe_tasks ; 1 sec. Apnoe tasks |
|
134
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
83 call customview_second ; Do every-second tasks for the custom view area |
|
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
84 ; call divemode_check_for_warnings ; Check for any warnings |
| 0 | 85 bra diveloop_loop1x ; Common Tasks |
| 86 | |
| 87 diveloop_loop1x: | |
| 88 ; Common 1sec. tasks for all modes | |
| 131 | 89 rcall timeout_divemode ; dive finished? This routine sets the required flags |
| 90 rcall set_dive_modes ; tests if depth>threshold | |
| 91 rcall set_min_temp ; store min. temp if required | |
| 0 | 92 |
| 93 btfsc store_sample ; store new sample? | |
| 94 call store_dive_data ; Store profile data | |
| 95 | |
| 96 btfss divemode ; Dive finished? | |
| 97 goto ghostwriter_end_dive ; Dive finished! | |
| 98 | |
| 99 btfsc divemode_gaschange ; Gas switch flag set? | |
| 100 rcall gas_switched_common ; Yes | |
| 101 | |
| 102 btfsc toggle_gf ; =1: Toggle GF/aGF | |
| 103 rcall divemodemode_togglegf ; Toggle aGF/GF | |
| 104 | |
| 105 ; btfsc FLAG_ccr_mode ; In CCR mode | |
| 106 ; call TFT_active_gas_divemode ; Update Setpoint every second | |
| 107 | |
| 113 | 108 call compute_ppo2 ; compute mv_sensorX and ppo2_sensorX arrays |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
109 call check_sensors ; Check O2 sensor thresholds for fallback |
| 113 | 110 |
| 0 | 111 bcf onesecupdate ; one seconds update done |
| 112 | |
| 113 diveloop_loop3: | |
| 114 rcall test_switches_divemode ; Check switches in divemode | |
| 115 | |
| 116 global diveloop_loop4 | |
| 117 diveloop_loop4: ; Menu-Exit returns here... | |
| 118 btfsc toggle_customview ; Next view? | |
| 119 call customview_toggle ; Yes, show next customview (and delete this flag) | |
| 120 | |
| 121 btfsc pressure_refresh ; new pressure available? | |
| 122 rcall update_temp_and_or_depth ; Yes, display new depth and clear "pressure_refresh" flag | |
| 123 | |
| 124 btfsc oneminupdate ; one minute tasks | |
| 125 rcall update_divemode60 ; Update clock, etc. | |
| 126 | |
| 127 btfss quarter_second_update | |
| 128 bra diveloop_loop4a | |
| 83 | 129 |
| 0 | 130 bcf quarter_second_update |
| 131 movlw .6 | |
| 132 cpfseq menupos3 ; in compass view? | |
| 133 bra diveloop_loop4a ; No | |
| 134 call TFT_dive_compass_heading ; Yes, update compass heading value | |
| 135 diveloop_loop4a: | |
| 136 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 137 bra diveloop_loop5 | |
| 138 bra diveloop_loop6 | |
| 139 diveloop_loop5: | |
| 140 btfss vusb_in ; USB (still) plugged in? | |
| 141 bcf enable_screen_dumps ; No, clear flag | |
| 142 call rs232_get_byte | |
| 143 btfsc rs232_recieve_overflow | |
| 144 bra diveloop_loop6 | |
| 145 movlw "l" | |
| 146 cpfseq RCREG1 | |
| 147 bra diveloop_loop6 | |
| 148 call TFT_dump_screen ; Dump the screen contents | |
| 149 diveloop_loop6: | |
| 150 | |
| 151 bra diveloop_loop ; Loop the divemode | |
| 152 ;-------------------------------------------------------------------------------------------------------- | |
| 153 | |
| 154 | |
| 155 divemode_apnoe_tasks: ; 1 sec. Apnoe tasks | |
|
134
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
156 call TFT_display_apnoe_descent ; Yes, Show descent timer |
| 0 | 157 call TFT_max_pressure ; use normal max. depth |
| 158 | |
| 159 btfsc divemode2 ; Time running? | |
| 160 bra divemode_apnoe_tasks2 ; New descent, reset data if flag is set | |
| 161 | |
| 162 rcall apnoe_calc_maxdepth | |
| 163 call TFT_display_apnoe_surface | |
| 164 call TFT_display_apnoe_last_max ; Show last max. depth | |
| 165 incf apnoe_surface_secs,F | |
| 166 movlw d'60' | |
| 167 cpfseq apnoe_surface_secs | |
| 168 bra divemode_apnoe_tasks1 | |
| 169 clrf apnoe_surface_secs | |
| 170 incf apnoe_surface_mins,F | |
| 171 | |
| 172 divemode_apnoe_tasks1: | |
| 173 bcf FLAG_active_descent ; Clear flag | |
| 174 btfsc divemode2 ; Time running? | |
| 175 return ; Yes, return | |
| 176 bsf FLAG_active_descent ; Set Flag | |
| 177 return | |
| 178 | |
| 179 divemode_apnoe_tasks2: | |
| 180 btfss FLAG_active_descent ; Are we descending? | |
| 181 return ; No, We are at the surface | |
| 182 rcall apnoe_calc_maxdepth ; Yes! | |
| 183 call TFT_apnoe_clear_surface ; Clear Surface timer | |
| 184 clrf apnoe_timeout_counter ; Delete timeout | |
| 185 clrf apnoe_surface_secs | |
| 186 clrf apnoe_surface_mins | |
| 187 clrf apnoe_secs | |
| 188 clrf apnoe_mins ; Reset Descent time | |
| 189 movlw .0 | |
| 190 movff WREG,max_pressure+0 | |
| 191 movff WREG,max_pressure+1 ; Reset Max. Depth | |
| 192 bcf FLAG_active_descent ; Clear flag | |
| 193 return | |
| 194 | |
| 195 global apnoe_calc_maxdepth | |
| 196 apnoe_calc_maxdepth: | |
| 197 movff apnoe_max_pressure+0,sub_a+0 | |
| 198 movff apnoe_max_pressure+1,sub_a+1 | |
| 199 movff max_pressure+0,sub_b+0 | |
| 200 movff max_pressure+1,sub_b+1 | |
| 201 call subU16 ; sub_c = sub_a - sub_b | |
| 202 ; apnoe_max_pressure<max_pressure -> neg_flag=1 | |
| 203 ; max_pressure<=apnoe_max_pressure -> neg_flag=0 | |
| 204 btfss neg_flag | |
| 205 return | |
| 206 ;apnoe_max_pressure<max_pressure | |
| 207 movff max_pressure+0,apnoe_max_pressure+0 | |
| 208 movff max_pressure+1,apnoe_max_pressure+1 | |
| 209 return | |
| 210 | |
| 211 | |
| 212 calc_deko_divemode: | |
| 213 btfsc twosecupdate ; two seconds after the last call | |
| 214 bra calc_deko_divemode2 ; Yes, calculate and display deco data ("first second") | |
| 215 | |
| 216 bsf twosecupdate ; No, but next second! | |
| 217 ; Routines used in the "other second" | |
| 218 call calc_average_depth ; calculate average depth | |
| 219 call calc_velocity ; calculate vertical velocity and display if > threshold (every two seconds) | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
220 call set_reset_safety_stop ; Set flags for safety stop and/or reset safety stop |
| 0 | 221 call TFT_debug_output |
| 222 | |
| 223 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 224 return | |
| 225 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 226 return | |
| 227 | |
| 228 ; Calculate CNS | |
| 229 rcall set_actual_ppo2 ; Set char_I_actual_ppO2 | |
| 230 clrf WREG | |
| 231 movff WREG,char_I_step_is_1min ; Make sure to be in 2sec mode. | |
| 232 call deco_calc_CNS_fraction ; calculate CNS | |
| 233 movlb b'00000001' ; rambank 1 selected | |
| 234 | |
| 235 ; Check for a gas change | |
| 236 rcall check_gas_change ; Checks if a better gas should be selected (by user) | |
| 237 | |
| 238 return | |
| 239 | |
| 240 global set_actual_ppo2 | |
| 241 set_actual_ppo2: ; calculate ppO2 in 0.01bar (e.g. 150 = 1.50 bar ppO2) | |
| 111 | 242 btfsc divemode ; in divemode |
| 243 bra set_actual_ppo2_dive ; Yes | |
| 244 ; No, use simulated ambient pressure for char_I_actual_ppO2 | |
| 245 movff char_I_bottom_depth,WREG | |
| 246 mullw .100 | |
| 247 movlw LOW(.1000) | |
| 248 addwf PRODL,W | |
| 249 movwf xA+0 | |
| 250 movlw HIGH(.1000) | |
| 251 addwfc PRODH,W | |
| 252 movwf xA+1 ; P_amb in millibar (1000 = 1.00 bar). | |
| 253 bra set_actual_ppo2_common | |
| 254 set_actual_ppo2_dive: | |
| 0 | 255 SAFE_2BYTE_COPY amb_pressure, xA ; P_amb in millibar (1000 = 1.00 bar). |
| 111 | 256 set_actual_ppo2_common: |
| 113 | 257 movlw d'10' |
| 0 | 258 movwf xB+0 |
| 259 clrf xB+1 | |
| 260 call div16x16 ; xC=p_amb/10 (100 = 1.00 bar). | |
| 261 movff xC+0,xA+0 | |
| 262 movff xC+1,xA+1 | |
| 263 movff char_I_O2_ratio,xB+0 | |
| 264 clrf xB+1 | |
| 265 call mult16x16 ; char_I_O2_ratio * (p_amb/10) | |
| 266 movff xC+0,xA+0 | |
| 267 movff xC+1,xA+1 | |
| 268 movlw d'100' | |
| 269 movwf xB+0 | |
| 270 clrf xB+1 | |
| 271 call div16x16 ; xC=(char_I_O2_ratio * p_amb/10)/100 | |
| 272 | |
| 273 ; Copy ppO2 for CNS calculation | |
| 274 tstfsz xC+1 ; Is ppO2 > 2.55bar ? | |
| 275 setf xC+0 ; yes: bound to 2.55... better than wrap around. | |
| 276 | |
| 277 movff xC+0, char_I_actual_ppO2 ; copy last ppO2 to buffer register | |
| 278 btfsc is_bailout ; In Bailout? | |
| 279 return ; Yes, done. | |
| 280 ; No Bailout, check for ccr mode | |
| 281 btfsc FLAG_ccr_mode ; If FLAG_ccr_mode=1... | |
| 282 movff char_I_const_ppO2, char_I_actual_ppO2 ; ...copy last ppO2 to buffer register | |
| 283 return | |
| 284 | |
| 285 | |
| 286 calc_deko_divemode2: | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
287 bcf twosecupdate |
| 0 | 288 |
| 289 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 290 return | |
| 291 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 292 return | |
| 293 | |
| 294 extern deco_setup_dive | |
| 295 call deco_setup_dive ; Pass all parameters to the C code | |
| 296 | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
297 bcf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
298 |
| 161 | 299 btfss FLAG_ccr_mode ; In CCR mode? |
| 300 bra calc_deko_divemode2a ; Skip all the following if not in CCR mode | |
| 301 | |
| 0 | 302 TSTOSS opt_ccr_mode ; =0: Fixed SP, =1: Sensor |
| 303 bra calc_deko_divemode2a | |
| 304 rcall divemode_setup_sensor_values ; Setup sensor values | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
305 movff sensor_setpoint,char_I_const_ppO2; Copy sensor result |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
306 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
307 TSTOSS opt_sensor_fallback ; =1: Fallback to SP1 when sensor is lost |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
308 bra calc_deko_divemode2a ; Never fallback |
|
152
19ad15f04f60
BUGFIX: Clear Setpoint-Fallback warning when in bailout
heinrichsweikamp
parents:
148
diff
changeset
|
309 |
|
19ad15f04f60
BUGFIX: Clear Setpoint-Fallback warning when in bailout
heinrichsweikamp
parents:
148
diff
changeset
|
310 btfsc is_bailout ; In bailout? |
|
19ad15f04f60
BUGFIX: Clear Setpoint-Fallback warning when in bailout
heinrichsweikamp
parents:
148
diff
changeset
|
311 bra calc_deko_divemode2a ; Never fallback in bailout |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
312 ; Check if we should fallback to SP1 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
313 btfsc use_02_sensor1 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
314 bra calc_deko_divemode2a ; At least one sensor is active, no fallback |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
315 btfsc use_02_sensor2 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
316 bra calc_deko_divemode2a ; At least one sensor is active, no fallback |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
317 btfsc use_02_sensor3 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
318 bra calc_deko_divemode2a ; At least one sensor is active, no fallback |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
319 ; No sensor in use -> fallback |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
320 movff char_I_setpoint_cbar+0,char_I_const_ppO2 ; Setup fixed Setpoint (Always fallback to SP1), overwrite sensor result |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
321 bsf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
| 0 | 322 |
| 323 calc_deko_divemode2a: | |
| 324 SAFE_2BYTE_COPY amb_pressure,int_I_pres_respiration ; C-code needs the ambient pressure | |
| 325 clrf WREG | |
| 326 movff WREG,char_I_step_is_1min ; Force 2 second deco mode | |
| 327 | |
| 328 clrf TMR5L | |
| 329 clrf TMR5H ; 30,51757813µs/bit in TMR5L:TMR5H | |
| 330 call deco_calc_hauptroutine ; calc_tissue | |
| 331 movlb .1 | |
| 332 | |
| 333 movff char_O_deco_status,WREG ; Is a compute cycle finished ? | |
| 334 iorwf WREG,F | |
| 335 btfss STATUS,Z | |
| 336 return ; Return is status <> 0 | |
| 337 | |
| 338 ; Check if deco stops are necessary ? | |
| 339 movff char_O_first_deco_depth,wait_temp ; copy ceiling to temp register | |
| 340 tstfsz wait_temp ; Ceiling<0m? | |
| 341 bra calc_deko_divemode3 ; Yes! | |
| 342 | |
| 343 btfsc decostop_active ; Already in nodeco mode ? | |
| 344 call TFT_display_ndl_mask ; No, Clear deco data, display nostop time | |
| 345 bcf decostop_active ; clear flag (again) | |
| 346 | |
| 347 ; Copy for profile recording | |
| 348 clrf decodata+0 | |
| 349 movff char_O_nullzeit,decodata+1 ; NDL | |
| 350 | |
| 351 call TFT_display_ndl ; display no deco limit | |
| 352 return | |
| 353 | |
| 354 calc_deko_divemode3: | |
| 355 btfss decostop_active ; Already in deco mode ? | |
| 356 call TFT_display_deko_mask ; No, clear nostop time, display decodata | |
| 357 bsf decostop_active ; Set flag (again) | |
| 358 | |
| 359 ; Copy for profile recording | |
| 360 movff char_O_first_deco_depth,decodata+0 ; ceiling | |
| 361 movff char_O_first_deco_time,decodata+1 ; length of first stop in minues | |
| 362 call TFT_display_deko ; display decodata | |
| 363 call TFT_show_TTS_divemode ; display TTS | |
| 364 | |
| 365 movff char_I_extra_time,WREG | |
| 366 tstfsz WREG ; extra time = 0? | |
| 367 bra calc_deko_divemode4 ; No, compute it | |
| 368 return | |
| 369 | |
| 370 calc_deko_divemode4: | |
| 371 ; Check if extra cycles are needed to compute @5 variant: | |
| 372 decfsz apnoe_mins,F ; Reached count-down ? | |
| 373 return ; No: don't compute yet. | |
| 374 | |
| 375 movlw .6 | |
| 376 movff WREG,char_O_deco_status ; Stole next cycles for @5 variant. | |
| 377 | |
| 378 movlw .2 ; Restart countdown. | |
| 379 movwf apnoe_mins | |
| 380 return ; done. | |
| 381 | |
| 382 ;----------------------------------------------------------------------------- | |
| 383 | |
| 384 divemodemode_togglegf: ; Toggle aGF/GF | |
| 385 bcf toggle_gf ; clear flag | |
| 386 btg use_agf ; Toggle GF | |
| 387 call TFT_gf_mask ; Setup Mask | |
| 388 clrf WREG | |
| 389 movff WREG,char_O_deco_status ; Restart decoplan computation | |
| 390 return | |
| 391 | |
| 392 divemode_setup_sensor_values: | |
| 393 ; sum up sensor values (in xA:2) and active sensors in (xB:2) | |
| 394 clrf xB+0 | |
| 395 clrf xB+1 | |
| 396 clrf xA+0 | |
| 397 clrf xA+1 | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
398 btfss use_02_sensor1 ; Sensor1 active? |
| 0 | 399 bra divemode_setup_sensor_values2 ; No |
| 400 movf o2_ppo2_sensor1,W | |
| 401 addwf xA+0 | |
| 402 movlw .0 | |
| 403 addwfc xA+1 ; Add into xA:2 | |
| 404 incf xB+0,F ; Add a sensor | |
| 405 divemode_setup_sensor_values2: | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
406 btfss use_02_sensor2 ; Sensor2 active? |
| 0 | 407 bra divemode_setup_sensor_values3 ; No |
| 408 movf o2_ppo2_sensor2,W | |
| 409 addwf xA+0 | |
| 410 movlw .0 | |
| 411 addwfc xA+1 ; Add into xA:2 | |
| 412 incf xB+0,F ; Add a sensor | |
| 413 divemode_setup_sensor_values3: | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
414 btfss use_02_sensor3 ; Sensor3 active? |
| 0 | 415 bra divemode_setup_sensor_values4 ; No |
| 416 movf o2_ppo2_sensor3,W | |
| 417 addwf xA+0 | |
| 418 movlw .0 | |
| 419 addwfc xA+1 ; Add into xA:2 | |
| 420 incf xB+0,F ; Add a sensor | |
| 421 divemode_setup_sensor_values4: | |
| 422 call div16x16 ; xA/xB=xC with xA+0 as remainder | |
| 423 movff xC+0,sensor_setpoint ; Copy result | |
| 424 return | |
| 425 | |
| 426 calc_velocity: ; called every two seconds | |
| 427 btfss divemode | |
| 428 bra do_not_display_velocity ; display velocity only in divemode (Not at the surface after dive) | |
| 429 | |
| 430 calc_velocity2: | |
| 431 SAFE_2BYTE_COPY amb_pressure, sub_a | |
| 432 movff last_pressure_velocity+0,sub_b+0 | |
| 433 movff last_pressure_velocity+1,sub_b+1 | |
| 434 movff sub_a+0,last_pressure_velocity+0 ; store old value for velocity | |
| 435 movff sub_a+1,last_pressure_velocity+1 | |
| 436 | |
| 437 call subU16 ; sub_c = amb_pressure - last_pressure | |
| 438 | |
| 439 movff sub_c+0,xA+0 | |
| 440 movff sub_c+1,xA+1 | |
| 441 movlw d'39' ; 77 when called every second.... | |
| 442 movwf xB+0 | |
| 443 clrf xB+1 | |
| 444 call mult16x16 ; differential pressure in mbar*77... | |
| 445 movff xC+0,divA+0 | |
| 446 movff xC+1,divA+1 | |
| 447 movlw d'7' | |
| 448 movwf divB+0 | |
| 449 call div16 ; devided by 2^7 equals velocity in m/min | |
| 450 | |
| 451 movlw d'99' | |
| 452 cpfsgt divA+0 ; limit to 99m/min | |
| 453 bra calc_velocity3 | |
| 454 movwf divA+0 ; divA=99 | |
| 455 | |
| 456 calc_velocity3: | |
| 457 movlw velocity_warning_level_1 ; lowest threshold for display vertical velocity | |
| 458 subwf divA+0,W ; | |
| 459 btfss STATUS,C | |
| 460 bra do_not_display_velocity | |
| 461 | |
| 462 bsf display_velocity | |
| 463 call TFT_display_velocity ; With divA+0 = m/min... | |
| 464 return | |
| 465 | |
| 466 do_not_display_velocity: | |
| 467 btfss display_velocity ; Velocity was not displayed, do not delete | |
| 468 return | |
| 469 bcf display_velocity ; Velocity was displayed, delete velocity now | |
| 470 call TFT_display_velocity_clear | |
| 471 return | |
| 472 | |
| 473 ;============================================================================= | |
| 474 | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
475 set_reset_safety_stop: ; Set flags for safety stop and/or reset safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
476 TSTOSS opt_enable_safetystop ; =1: A safety stop is shown |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
477 bra delete_safety_stop ; No, don't show safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
478 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
479 btfsc decostop_active ; Is a deco stop displayed? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
480 bra delete_safety_stop ; Yes, don't show safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
481 ; Below "safety_stop_reset"? Set flag and reset count-down timer |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
482 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
483 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
484 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
485 movff hi,sub_a+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
486 movlw LOW safety_stop_reset |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
487 movwf sub_b+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
488 movlw HIGH safety_stop_reset |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
489 movwf sub_b+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
490 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
491 btfss neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
492 bra reset_safety_stop ; Below 10m, reset safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
493 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
494 ; Above "safety_stop_end"? Clear flag. |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
495 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
496 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
497 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
498 movff hi,sub_a+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
499 movlw LOW safety_stop_end |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
500 movwf sub_b+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
501 movlw HIGH safety_stop_end |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
502 movwf sub_b+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
503 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
504 btfsc neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
505 bra delete_safety_stop ; Above 3m, remove safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
506 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
507 ; Above "safety_stop_start"? Activate safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
508 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
509 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
510 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
511 movff hi,sub_a+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
512 movlw LOW safety_stop_start |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
513 movwf sub_b+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
514 movlw HIGH safety_stop_start |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
515 movwf sub_b+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
516 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
517 btfsc neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
518 bra acivate_safety_stop ; Above 5m, activate safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
519 bra reset_safety_stop2 ; Pause safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
520 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
521 acivate_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
522 tstfsz safety_stop_countdown ; Countdown at zero? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
523 bsf show_safety_stop ; No, Set flag! |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
524 return |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
525 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
526 delete_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
527 clrf safety_stop_countdown ; reset timer |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
528 bra reset_safety_stop2 ; Remove safety stop from display |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
529 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
530 reset_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
531 movlw safety_stop_length ;[s] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
532 movwf safety_stop_countdown ; reset timer |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
533 reset_safety_stop2: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
534 bcf show_safety_stop ; Clear flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
535 btfss safety_stop_active ; Safety stop shown |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
536 return ; No, don't delete it |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
537 bcf safety_stop_active ; Clear flag |
| 131 | 538 call TFT_clear_safety_stop ; Clear safety stop |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
539 return |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
540 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
541 ;============================================================================= |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
542 |
| 0 | 543 timeout_menuview: |
| 544 decfsz timeout_counter3,F ; timeout for menuview | |
| 545 return ; No timeout, return | |
| 546 ; Timeout, clear e.g. "Menu?" | |
| 547 goto menuview_toggle_reset ; "returns" | |
| 548 | |
| 549 timeout_divemode_menu: | |
| 550 decfsz timeout_counter3,F ; timeout for divemode menu | |
| 551 return | |
| 552 | |
| 553 global timeout_divemode_menu2 | |
| 554 timeout_divemode_menu2: ; Called from divemenu_tree.asm | |
| 555 bcf divemode_menu ; Timeout! Clear flag | |
| 556 call TFT_clear_divemode_menu ; Clear menu | |
| 557 call TFT_active_gas_divemode ; Redraw gas/setpoint/diluent | |
| 558 bcf blinking_better_gas ; Clear flag to have temperature updated once | |
| 559 call TFT_temp_divemode ; Displays temperature | |
| 560 | |
| 561 btfss decostop_active ; In deco mode ? | |
| 562 bra timeout_divemode_menu_ndl ; No, show NDL again | |
| 563 ; Show deco | |
| 564 call TFT_display_deko_mask ; clear nostop time, display decodata | |
| 565 call TFT_display_deko | |
| 566 call TFT_show_TTS_divemode | |
| 567 return | |
| 568 timeout_divemode_menu_ndl: ; Show NDL | |
| 569 call TFT_display_ndl_mask ; Clear deco data, display nostop time | |
| 570 call TFT_display_ndl | |
| 571 return | |
| 572 | |
| 573 timeout_divemode: | |
| 574 btfsc divemode_menu ; Divemode menu active? | |
| 575 rcall timeout_divemode_menu ; Yes, check the timeout for it... | |
| 576 | |
| 577 btfsc menuview ; is a menuview shown? | |
| 578 rcall timeout_menuview ; Yes, check the timeout for it... | |
| 579 | |
| 580 btfss realdive ; Dive longer then one minute | |
| 581 return | |
| 582 | |
| 583 btfsc FLAG_apnoe_mode ; In Apnoe mode? | |
|
35
eca4a201d8cf
change apnea timeout, do no longer store apnea dives in logbook
heinrichsweikamp
parents:
23
diff
changeset
|
584 bra timeout_divemode2 ; Yes, use apnoe_timeout [min] for timeout |
| 0 | 585 |
| 586 ifndef __DEBUG | |
| 587 btfsc simulatormode_active ; In Simulator mode? | |
| 588 bra timeout_divemode3 ; Yes, use simulator timeout | |
| 589 endif | |
| 590 | |
| 591 bcf divemode | |
| 148 | 592 infsnz timeout_counter,F |
| 593 incf timeout_counter2,F ; timeout is 15bits | |
| 0 | 594 |
| 595 movlw LOW divemode_timeout | |
| 596 movwf sub_a+0 | |
| 597 movlw HIGH divemode_timeout | |
| 598 movwf sub_a+1 | |
| 599 | |
| 600 movff timeout_counter, sub_b+0 | |
| 601 movff timeout_counter2, sub_b+1 | |
| 602 call subU16 ; sub_c = sub_a - sub_b | |
| 603 btfss neg_flag ; Result negative? | |
| 604 bsf divemode ; No, set flag | |
| 605 return | |
| 606 | |
| 607 timeout_divemode2: | |
| 608 incf timeout_counter,F ; seconds... | |
| 609 movlw d'60' | |
| 610 cpfseq timeout_counter ; timeout_counter=60? | |
| 611 return ; No. | |
| 612 ; One minute timeout done. | |
| 613 clrf timeout_counter | |
| 614 bcf divemode | |
| 615 incf apnoe_timeout_counter,F | |
| 616 movlw apnoe_timeout ; apnoe timeout [min] | |
| 617 cpfseq apnoe_timeout_counter | |
| 618 bsf divemode | |
| 619 return | |
| 620 | |
| 621 timeout_divemode3: | |
| 622 bcf divemode | |
| 623 incf timeout_counter,F | |
| 624 movlw simulator_timeout ; simulator timeout | |
| 625 cpfsgt timeout_counter | |
| 626 bsf divemode | |
| 627 return | |
| 628 | |
| 629 update_temp_and_or_depth: ; New sensor data arrived... | |
| 630 btfsc temp_changed | |
| 631 call TFT_temp_divemode ; Displays temperature | |
| 632 | |
| 633 btfsc pressure_refresh | |
| 634 call TFT_depth ; Displays new depth | |
| 635 | |
| 636 rcall set_max_depth ; update max. depth if required | |
| 637 bcf pressure_refresh ; until new pressure is available | |
| 638 return | |
| 639 | |
| 640 update_divemode60: ; update any minute | |
| 641 call get_battery_voltage ; gets battery voltage | |
| 642 call set_powersafe ; Battery low? | |
| 643 call TFT_max_pressure ; Update max. depth | |
| 644 call customview_minute ; Do every-minute tasks for the custom view area | |
| 645 bcf oneminupdate | |
| 646 | |
| 647 btfss simulatormode_active ; in simulator mode? | |
| 648 return ; No | |
| 649 ; Yes, quite dive mode simulation after 21*256s=89min:36s | |
| 650 movlw .20 | |
| 651 cpfsgt total_divetime_seconds+1 ; Timeout? | |
| 652 return ; No | |
| 653 ifdef __DEBUG | |
| 654 return ; No simulator timeout in debug mode | |
| 655 endif | |
| 656 bra divemode_option1 ; Yes, set to 0m and "return" | |
| 657 | |
| 658 set_max_depth: | |
| 659 movff max_pressure+0,sub_a+0 | |
| 660 movff max_pressure+1,sub_a+1 | |
| 661 SAFE_2BYTE_COPY rel_pressure, sub_b | |
| 662 call subU16 ; sub_c = sub_a - sub_b | |
| 663 ; max_pressure<rel_pressure -> neg_flag=1 | |
| 664 ; rel_pressure<=max_pressure -> neg_flag=0 | |
| 665 btfss neg_flag | |
| 666 return | |
| 667 ; max_pressure<rel_pressure | |
| 668 movff sub_b+0,max_pressure+0 | |
| 669 movff sub_b+1,max_pressure+1 | |
| 670 call TFT_max_pressure ; No, use normal max. depth | |
| 671 return | |
| 672 | |
| 673 set_min_temp: | |
| 674 movff minimum_temperature+0,sub_a+0 | |
| 675 movff minimum_temperature+1,sub_a+1 | |
| 676 SAFE_2BYTE_COPY temperature,sub_b | |
| 677 call sub16 ; sub_c = sub_a - sub_b | |
| 678 ; minimum_temperature<T -> neg_flag=1 | |
| 679 ; T<=minimum_temperature -> neg_flag=0 | |
| 680 btfsc neg_flag | |
| 681 return | |
| 682 ; minimum_temperature>=T | |
| 683 movff sub_b+0,minimum_temperature+0 | |
| 684 movff sub_b+1,minimum_temperature+1 | |
| 685 return | |
| 686 | |
| 687 global set_dive_modes | |
| 688 set_dive_modes: | |
| 689 btfsc high_altitude_mode ; In high altitude (Fly) mode? | |
| 690 bra set_dive_modes3 ; Yes! | |
| 691 | |
| 692 set_dive_modes0: | |
| 693 movlw LOW start_dive_threshold | |
| 694 movwf sub_a+0 ; dive_treshold is in cm | |
| 695 movlw HIGH start_dive_threshold | |
| 696 movwf sub_a+1 ; dive_treshold is in cm | |
| 697 | |
| 698 set_dive_modes1: | |
| 699 SAFE_2BYTE_COPY rel_pressure, sub_b | |
| 700 call subU16 ; sub_c = sub_a - sub_b | |
| 701 | |
| 702 btfss neg_flag | |
| 703 bra set_dive_modes2 ; too shallow (rel_pressure<dive_threshold) | |
| 704 | |
| 705 btfsc realdive ; Dive longer than one minute? | |
| 706 clrf timeout_counter ; Yes, reset timout counter | |
| 707 | |
| 708 set_dive_modes_common: | |
| 709 bsf divemode ; (Re-)Set divemode flag | |
| 710 bsf divemode2 ; displayed divetime is running | |
| 711 return | |
| 712 | |
| 713 set_dive_modes2: | |
| 714 bcf divemode2 ; Stop time | |
| 715 btfss realdive ; dive longer then one minute? | |
| 716 bcf divemode ; no -> this was no real dive | |
| 717 return ; No, return | |
| 718 | |
| 719 | |
| 720 set_dive_modes3: ; High-altitude mode | |
| 721 btfsc realdive ; dive longer then one minute? | |
| 722 bra set_dive_modes0 ; Yes -> this is a real dive -> Use start_dive_threshold or ascend | |
| 723 | |
| 724 movlw HIGH high_altitude_dive_threshold | |
| 725 movwf sub_a+1 | |
| 726 movlw LOW high_altitude_dive_threshold | |
| 727 movwf sub_a+0 | |
| 728 bra set_dive_modes1 | |
| 729 | |
| 730 set_powersafe: | |
| 731 movlw color_code_battery_low+1; [%] | |
| 732 cpfslt batt_percent | |
| 733 return | |
| 734 | |
| 735 movlw d'7' ; Type of Alarm (Battery Low) | |
| 736 movwf AlarmType ; Copy to Alarm Register | |
| 737 bsf event_occured ; Set Event Flag | |
| 738 movlw .0 | |
| 739 movff WREG,opt_brightness ; Set Brightness to ECO | |
| 740 return ; return | |
| 741 | |
| 742 calc_average_depth: | |
| 743 btfsc reset_average_depth ; Reset the Avewrage depth? | |
| 744 rcall reset_average1 ; Reset the resettable average depth | |
| 745 | |
| 746 ; 1. Add new 2xdepth to the Sum of depths registers | |
| 747 SAFE_2BYTE_COPY rel_pressure, xB ; Buffer... | |
| 748 bcf STATUS,C | |
| 749 rlcf xB+0,F | |
| 750 rlcf xB+1,F ; x2 | |
| 751 | |
| 752 movf xB+0,w | |
| 753 addwf average_depth_hold+0,F | |
| 754 movf xB+1,w | |
| 755 addwfc average_depth_hold+1,F | |
| 756 movlw d'0' | |
| 757 addwfc average_depth_hold+2,F | |
| 758 addwfc average_depth_hold+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 759 | |
| 760 ; Do the same for the _total registers (Non-Resettable) | |
| 761 movf xB+0,w | |
| 762 addwf average_depth_hold_total+0,F | |
| 763 movf xB+1,w | |
| 764 addwfc average_depth_hold_total+1,F | |
| 765 movlw d'0' | |
| 766 addwfc average_depth_hold_total+2,F | |
| 767 addwfc average_depth_hold_total+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 768 | |
| 769 ; 2. Compute Average Depth on base of average_divesecs:2 | |
| 770 movff average_divesecs+0,xB+0 | |
| 771 movff average_divesecs+1,xB+1 ; Copy | |
| 772 movff average_depth_hold+0,xC+0 | |
| 773 movff average_depth_hold+1,xC+1 | |
| 774 movff average_depth_hold+2,xC+2 | |
| 775 movff average_depth_hold+3,xC+3 | |
| 776 | |
| 777 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder | |
| 778 movff xC+0,avr_rel_pressure+0 | |
| 779 movff xC+1,avr_rel_pressure+1 | |
| 780 | |
|
89
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
781 btfss divemode2 ; displayed divetime is running? |
|
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
782 return ; No (e.g. too shallow) |
|
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
783 |
| 0 | 784 ; 3. Compute Total Average Depth on base of total_divetime_seconds:2 |
| 785 movff total_divetime_seconds+0,xB+0 | |
| 786 movff total_divetime_seconds+1,xB+1 ; Copy | |
| 787 movff average_depth_hold_total+0,xC+0 | |
| 788 movff average_depth_hold_total+1,xC+1 | |
| 789 movff average_depth_hold_total+2,xC+2 | |
| 790 movff average_depth_hold_total+3,xC+3 | |
| 791 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder | |
| 792 movff xC+0,avr_rel_pressure_total+0 | |
| 793 movff xC+1,avr_rel_pressure_total+1 | |
| 794 | |
| 795 return | |
| 796 | |
| 797 reset_average1: | |
| 798 clrf average_depth_hold+0 | |
| 799 clrf average_depth_hold+1 | |
| 800 clrf average_depth_hold+2 | |
| 801 clrf average_depth_hold+3 ; Clear average depth register | |
| 802 movlw d'2' | |
| 803 movwf average_divesecs+0 | |
| 804 clrf average_divesecs+1 | |
| 805 bcf reset_average_depth ; Clear flag | |
| 806 return | |
| 807 | |
| 808 test_switches_divemode: ; checks switches in divemode | |
| 809 btfsc divemode_menu ; Divemode menu shown? | |
| 810 bra test_switches_divemode_menu ; Yes, use menu processor | |
| 811 btfsc switch_left | |
| 812 bra test_switches_divemode2 ; Enter button pressed, check if we need to do something | |
| 813 btfss switch_right | |
| 814 return ; No button press | |
| 815 tstfsz menupos2 ; any option shown? | |
| 816 bra test_switches_divemode1 ; Yes, do option tasks | |
| 817 bsf toggle_customview ; No, toggle custom view | |
| 818 return | |
| 819 | |
| 820 test_switches_divemode_menu: | |
| 821 btfsc switch_left | |
| 822 bra test_switches_divemode_menu2 ; Move cursor | |
| 823 btfsc switch_right | |
| 824 bra test_switches_divemode_menu3 ; Enter submenu or do something | |
| 825 return ; No button press | |
| 826 | |
| 827 test_switches_divemode_menu1: | |
| 828 clrf menupos | |
| 829 test_switches_divemode_menu2: | |
| 830 incf menupos,F | |
| 831 incf menupos4,W ; menupos4+1 -> WREG | |
| 832 cpfslt menupos ; >menupos4 (Set in menu_processor.asm)? | |
| 833 bra test_switches_divemode_menu1; > Yes, set to 1 | |
| 834 call TFT_divemode_menu_cursor ; Update the cursor | |
| 835 bcf switch_left | |
| 836 movlw divemode_menu_timeout ; Reload timeout | |
| 837 movwf timeout_counter3 ; timeout for divemode menu | |
| 838 return | |
| 839 | |
| 840 test_switches_divemode_menu3: ; Enter submenu or do something | |
| 841 bcf switch_right | |
| 842 ; decf menupos,F ; menu_processor needs 0-5... | |
| 843 extern do_line_menu | |
| 844 goto do_line_menu ; Warning! Trashes STKPTR and returns to diveloop_loop4: | |
| 845 | |
| 846 test_switches_divemode1: | |
| 847 bcf switch_right | |
| 848 movlw divemode_menuview_timeout | |
| 849 movwf timeout_counter3 ; Reload timeout | |
| 850 movff menupos2,WREG ; Menupos3 holds number of customview/divemode menu function | |
| 851 dcfsnz WREG,F | |
| 137 | 852 bra divemode_option_gaschange ; Switch to the indicated "better gas" |
| 853 dcfsnz WREG,F | |
| 0 | 854 bra divemode_option0 ; Start/Setup Divemode menu |
| 855 dcfsnz WREG,F | |
| 856 bra divemode_option1 ; Quit Simulation? | |
| 857 dcfsnz WREG,F | |
| 858 bra divemode_option2 ; Descent 1m | |
| 859 dcfsnz WREG,F | |
| 860 bra divemode_option3 ; Ascend 1m | |
| 861 dcfsnz WREG,F | |
| 862 bra divemode_option4 ; Quit Apnoe mode | |
| 863 dcfsnz WREG,F | |
| 864 bra divemode_option5 ; Reset Stopwatch (In Gauge mode) | |
| 865 return | |
| 866 | |
| 867 test_switches_divemode2: | |
| 868 bcf switch_left | |
| 869 call menuview_toggle ; Menu or Simulator tasks | |
| 870 return | |
| 871 | |
| 872 gas_switched_common: | |
|
99
87cc1adfe4da
show event "bailout" in the internal logbook
heinrichsweikamp
parents:
98
diff
changeset
|
873 bcf divemode_gaschange ; Clear flag |
|
87cc1adfe4da
show event "bailout" in the internal logbook
heinrichsweikamp
parents:
98
diff
changeset
|
874 |
| 0 | 875 decf menupos,W ; 1-5 -> 0-4 |
| 876 btfss FLAG_ccr_mode ; Choose OC Gases | |
| 877 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 878 btfsc FLAG_ccr_mode ; Choose CC Diluents | |
| 879 rcall setup_dil_registers ; With WREG=Gas 0-4 | |
| 880 | |
| 881 decf menupos,W ; 1-5 -> 0-4 | |
| 882 btfsc is_bailout ; Choose OC Bailouts (OC Gases) | |
| 883 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 884 | |
| 885 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 886 clrf WREG | |
| 887 movff WREG,char_O_deco_status ; Restart decoplan computation | |
| 98 | 888 |
| 889 ; Set flags for profile recording | |
| 890 bsf event_occured ; Set global event byte | |
| 891 btfsc is_bailout ; Choose OC Bailouts (OC Gases) | |
| 892 bsf bailoutgas_event ; Bailout gas change | |
| 893 btfss is_bailout ; Choose OC Bailouts (OC Gases) | |
| 894 bsf stored_gas_changed ; OC gas change | |
| 0 | 895 return |
| 896 | |
| 897 global setup_gas_registers | |
| 898 setup_gas_registers: ; With WREG=Gas 0-4 | |
| 899 lfsr FSR1,opt_gas_O2_ratio+0 | |
| 900 movff PLUSW1,char_I_O2_ratio ; O2 (For ppO2 calculations) | |
| 901 lfsr FSR1,opt_gas_He_ratio+0 | |
| 902 movff PLUSW1,char_I_He_ratio ; He | |
| 903 incf WREG,W ; Gas# 1-5 | |
| 904 movff WREG,char_I_current_gas ; Set gas | |
| 905 movff WREG,active_gas ; Set for logbook and display | |
| 906 banksel char_I_O2_ratio | |
| 907 movf char_I_O2_ratio,W ; Add O2... | |
| 908 addwf char_I_He_ratio,W ; ...and He... | |
| 909 sublw .100 ; ...subtract both from 100 | |
| 910 movwf char_I_N2_ratio ; -> N2! | |
| 911 banksel common | |
| 912 return | |
| 913 | |
| 914 global setup_dil_registers | |
| 915 setup_dil_registers: ; With WREG=dil 0-4 | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
916 btfsc is_bailout |
|
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
917 return ; Ignore in bailout |
| 0 | 918 lfsr FSR1,opt_dil_O2_ratio+0 |
| 919 movff PLUSW1,char_I_O2_ratio ; O2 (For ppO2 calculations) | |
| 920 lfsr FSR1,opt_dil_He_ratio+0 | |
| 921 movff PLUSW1,char_I_He_ratio ; He | |
| 922 incf WREG,W ; Gas# 1-5 | |
| 923 movff WREG,char_I_current_gas ; Set gas | |
| 924 movff WREG,active_gas ; Set for logbook and display | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
925 movff WREG,active_diluent ; As a backup when switching back from Bailout to CCR |
| 0 | 926 banksel char_I_O2_ratio |
| 927 movf char_I_O2_ratio,W ; Add O2... | |
| 928 addwf char_I_He_ratio,W ; ...and He... | |
| 929 sublw .100 ; ...subtract both from 100 | |
| 930 movwf char_I_N2_ratio ; -> N2! | |
| 931 banksel common | |
| 932 return | |
| 933 | |
| 137 | 934 divemode_option_gaschange: ; Switch to the better gas |
| 935 movff better_gas_number,menupos; 1-5 | |
| 936 bsf divemode_gaschange ; Change the gas in the dive mode loop... | |
| 937 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
|
138
2852b0bd6391
minor: some extra protection against wrong gas selection
heinrichsweikamp
parents:
137
diff
changeset
|
938 bcf better_gas_available ; Clear flag immediately |
| 137 | 939 return |
| 940 | |
| 0 | 941 divemode_option0: ; Start/Setup Divemode menu |
| 942 call TFT_clear_divemode_menu ; Clear menu area | |
| 943 bcf menuview | |
| 944 extern do_main_divemenu | |
| 945 call do_main_divemenu | |
| 946 global divemode_option0_return | |
| 947 divemode_option0_return: | |
| 948 ; movlw .1 | |
| 949 ; movwf menupos ; Set to first option in divemode menu | |
| 950 call TFT_divemode_menu_cursor; Show the cursor | |
| 951 movlw divemode_menu_timeout | |
| 952 movwf timeout_counter3 ; timeout for divemode menu | |
| 953 bsf divemode_menu ; Set flag | |
| 954 clrf menupos2 ; Clear option counter | |
| 955 bra diveloop_loop4 ; Goto back to diveloop (Menuprocessor trashes STKPTR!) | |
| 956 | |
| 957 divemode_option4: | |
| 958 movlw d'58' ; two seconds left | |
| 959 movwf timeout_counter | |
| 960 movlw apnoe_timeout-1 ; apnoe timeout [min] | |
| 961 movwf apnoe_timeout_counter | |
| 962 btfss simulatormode_active ; in simulator mode? | |
| 963 return ; No | |
| 964 divemode_option1: ; Quit simulation mode | |
| 965 banksel isr_backup | |
| 966 movlw low .1000 | |
| 967 movwf sim_pressure+0 | |
| 968 movlw high .1000 | |
| 969 movwf sim_pressure+1 ; Set to 0m -> End of Dive | |
| 970 banksel common | |
| 971 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
| 972 | |
| 973 btfss FLAG_apnoe_mode ; In Apnoe mode? | |
| 974 return ; No | |
| 975 movlw d'58' ; two seconds left | |
| 976 movwf timeout_counter | |
| 977 movlw apnoe_timeout-1 ; apnoe timeout [min] | |
| 978 movwf apnoe_timeout_counter | |
| 979 return | |
| 980 | |
| 981 divemode_option3: ; minus 1m | |
| 982 banksel isr_backup | |
| 983 movlw d'100' | |
| 984 subwf sim_pressure+0 | |
| 985 movlw .0 | |
| 986 subwfb sim_pressure+1 | |
| 987 rcall divemode_simulator_check_limits | |
| 988 banksel common | |
| 989 return | |
| 990 | |
| 991 divemode_option2: ; plus 1m | |
| 992 banksel isr_backup | |
| 993 movlw d'100' | |
| 994 addwf sim_pressure+0 | |
| 995 movlw .0 | |
| 996 addwfc sim_pressure+1 | |
| 997 rcall divemode_simulator_check_limits | |
| 998 banksel common | |
| 999 return | |
| 1000 | |
| 1001 divemode_option5: | |
| 1002 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
| 1003 bsf reset_average_depth ; Set Flag | |
| 1004 return | |
| 1005 | |
| 1006 divemode_simulator_check_limits: | |
| 1007 ; Check limits (150m and 0m) | |
| 1008 movlw LOW d'16000' ; Compare to 16bar=16000mbar (150m). | |
| 1009 subwf sim_pressure+0,W | |
| 1010 movlw HIGH d'16000' | |
| 1011 subwfb sim_pressure+1,W | |
| 1012 bnc divemode_simulator_check_limits2 ; No-carry = borrow = not deeper | |
| 1013 | |
| 1014 ; Too deep, limit to 150m | |
| 1015 movlw LOW d'16000' | |
| 1016 movwf sim_pressure+0 | |
| 1017 movlw HIGH d'16000' | |
| 1018 movwf sim_pressure+1 | |
| 1019 return | |
| 1020 divemode_simulator_check_limits2: | |
| 1021 movlw LOW d'1000' ; Compare to 1bar == 0m == 1000 mbar. | |
| 1022 subwf sim_pressure+0,W | |
| 1023 movlw HIGH d'1000' | |
| 1024 subwfb sim_pressure+1,W | |
| 1025 btfsc STATUS,C ; No-carry = borrow = not deeper. | |
| 1026 return ; Deeper than 0m == Ok. | |
| 1027 ; Too shallow, limit to 0m | |
| 1028 movlw LOW d'1000' | |
| 1029 movwf sim_pressure+0 | |
| 1030 movlw HIGH d'1000' | |
| 1031 movwf sim_pressure+1 | |
| 1032 return | |
| 1033 | |
| 1034 ;============================================================================= | |
| 1035 ; Compare all enabled gas in list, to see if a better one is available. | |
| 1036 ; | |
| 1037 ; Output: better_gas_available, better_gas_number | |
| 1038 ; | |
| 1039 check_gas_change: ; Checks if a better gas should be selected (by user) | |
| 1040 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1041 clrf better_gas_number ; Clear better gas register | |
| 1042 | |
| 1043 SAFE_2BYTE_COPY rel_pressure,xA | |
| 1044 movlw d'100' | |
| 1045 movwf xB+0 | |
| 1046 clrf xB+1 | |
| 1047 call div16x16 ; compute depth in full m -> result in xC+0 | |
| 1048 | |
| 1049 btfss FLAG_ccr_mode ; In CCR mode... | |
| 1050 bra check_gas_change_OC_bail; No, check for OC or bailout | |
| 1051 btfsc is_bailout ; Bailout? | |
| 1052 bra check_gas_change_OC_bail; Yes, check for OC or bailout | |
| 1053 | |
| 1054 ; Check Diluents | |
|
160
99ac325586ce
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
heinrichsweikamp
parents:
152
diff
changeset
|
1055 bsf ccr_diluent_setup ; in CCR menus |
| 0 | 1056 movlw .0 |
| 1057 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1058 movlw .1 | |
| 1059 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1060 movlw .2 | |
| 1061 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1062 movlw .3 | |
| 1063 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1064 movlw .4 | |
| 1065 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1066 bra check_gas_change_exit | |
| 1067 | |
| 1068 check_gas_change_OC_bail: | |
|
160
99ac325586ce
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
heinrichsweikamp
parents:
152
diff
changeset
|
1069 bcf ccr_diluent_setup ; in OC menus |
| 0 | 1070 movlw .0 |
| 1071 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1072 movlw .1 | |
| 1073 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1074 movlw .2 | |
| 1075 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1076 movlw .3 | |
| 1077 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1078 movlw .4 | |
| 1079 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1080 ; bra check_gas_change_exit | |
| 1081 check_gas_change_exit: | |
| 1082 btfss better_gas_available ; Is a better gas available | |
| 1083 bcf blinking_better_gas ; No, Clear blinking flag | |
| 1084 btfss better_gas_available ; Is a better gas available | |
| 1085 clrf better_gas_number ; No, Clear better_gas_number (For gaslist display) | |
| 1086 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 1087 return | |
| 1088 | |
| 1089 check_gas_common: ; With Gas 0-4 in WREG | |
| 1090 btfsc better_gas_available ; Better Gas already found? | |
| 1091 return ; Yes, return | |
| 1092 lfsr FSR1,opt_gas_type ; 0=Disabled, 1=First, 2=Travel, 3=Deco | |
| 1093 btfss PLUSW1,0 ; Test for Bit0 and 1 -> type=3 -> Deco | |
| 1094 return ; No | |
| 1095 btfss PLUSW1,1 ; Test for Bit0 and 1 -> type=3 -> Deco | |
| 1096 return ; No | |
| 1097 incf WREG,W ; 1-5 | |
| 1098 cpfseq active_gas ; is this gas currently selected? | |
| 1099 bra check_gas_common2 ; No | |
| 1100 return ; Yes, skip test for active gas | |
| 1101 check_gas_common2: | |
| 1102 decf WREG,W ; 0-4 | |
| 1103 movwf hi ; Save tested gas 0-4 | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
1104 lfsr FSR1,opt_OC_bail_gas_change |
| 0 | 1105 movff PLUSW1,lo ; Change depth into lo |
| 1106 movlw minimum_change_depth | |
| 1107 cpfsgt lo ; Change depth>minimum_change_depth? | |
| 1108 return ; No, Change depth not deep enough, skip! | |
| 1109 movf xC+0,W ; load depth in m into WREG | |
| 1110 cpfsgt lo ; gas_change_depth < current depth? | |
| 69 | 1111 bra check_gas_common3 ; No, check if we are within the better_gas_window_pos window |
| 1112 incf hi,W ; 1-5 | |
| 1113 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 1114 movlw better_gas_window_neg | |
| 1115 subwf lo,W ; Change depth-better_gas_window_neg | |
| 1116 cpfslt xC+0 ; current depth<Change depth-better_gas_window_neg? | |
| 1117 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1118 return | |
| 1119 | |
| 1120 check_gas_common3: | |
| 0 | 1121 incf hi,W ; 1-5 |
| 1122 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 69 | 1123 movlw better_gas_window_pos |
| 1124 addwf lo,W ; Change depth+better_gas_window_pos | |
| 1125 cpfsgt xC+0 ; current depth>Change depth+better_gas_window_pos? | |
| 1126 bra check_gas_common4 ; Ok, now check the better gas ppO2<opt_ppO2_max | |
| 1127 return | |
| 1128 | |
| 1129 check_gas_common4: | |
| 1130 movf hi,W ; 0-4 | |
| 1131 lfsr FSR1,char_I_deco_N2_ratio | |
| 1132 movff PLUSW1,lo ; N2 ratio into lo | |
| 1133 lfsr FSR1,char_I_deco_He_ratio | |
| 1134 movff PLUSW1,xB+0 ; He ratio into xB+0 | |
| 1135 movf xB+0,W | |
| 1136 addwf lo,F | |
| 1137 movlw .101 | |
| 1138 bcf STATUS,C | |
| 1139 subfwb lo,F ; O2 ratio in lo | |
| 1140 | |
| 1141 SAFE_2BYTE_COPY amb_pressure, xA | |
| 1142 movlw d'10' | |
| 1143 movwf xB+0 | |
| 1144 clrf xB+1 | |
| 1145 call div16x16 ; xC=p_amb/10 | |
| 1146 movff xC+0,xA+0 | |
| 1147 movff xC+1,xA+1 | |
| 1148 movff lo,xB+0 ; =O2 ratio | |
| 1149 clrf xB+1 | |
| 1150 call mult16x16 ; lo * p_amb/10 | |
| 1151 | |
| 1152 ; Check very high ppO2 manually | |
| 1153 tstfsz xC+2 ; char_I_O2_ratio * p_amb/10 > 65536, ppO2>6,55bar? | |
| 1154 return ; Done. | |
| 1155 ; Check if ppO2>3,30bar | |
| 1156 btfsc xC+1,7 | |
| 1157 return ; Done. | |
| 1158 | |
| 1159 ; ; Check for low ppo2 | |
| 1160 ; movff xC+0,sub_b+0 | |
| 1161 ; movff xC+1,sub_b+1 | |
| 1162 ; movff opt_ppO2_min,WREG | |
| 1163 ; mullw d'100' ; opt_ppO2_min*100 | |
| 1164 ; movff PRODL,sub_a+0 | |
| 1165 ; movff PRODH,sub_a+1 | |
| 1166 ; call subU16 | |
| 1167 ; btfss neg_flag | |
| 1168 ; return ; Done (Too low). | |
| 1169 | |
| 1170 ;check if we are within our warning thresholds! | |
| 1171 movff xC+0,sub_b+0 | |
| 1172 movff xC+1,sub_b+1 | |
| 1173 movff opt_ppO2_max,WREG ; PPO2 Max for MOD calculation and color coding in divemode | |
| 1174 addlw .1 ; e.g. >1.60 | |
| 1175 mullw d'100' ; opt_ppO2_max*100 | |
| 1176 movff PRODL,sub_a+0 | |
| 1177 movff PRODH,sub_a+1 | |
| 1178 call subU16 | |
| 1179 btfss neg_flag | |
| 0 | 1180 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 69 | 1181 return ; Done. |
| 0 | 1182 |
| 1183 check_dil_common: ; With Dil 0-4 in WREG | |
| 1184 btfsc better_gas_available ; Better Diluent already found? | |
| 1185 return ; Yes, return | |
| 1186 lfsr FSR1,opt_dil_type ; 0=Disabled, 1=First, 2=Normal | |
| 1187 tstfsz PLUSW1 ; =0? | |
| 1188 bra check_dil_common1 ; No | |
| 1189 return ; Yes, skip inactive diluents for test | |
| 1190 check_dil_common1: | |
| 1191 incf WREG,W ; 1-5 | |
| 1192 cpfseq active_gas ; is this diluent currently selected? | |
| 1193 bra check_dil_common2 ; No | |
| 1194 return ; Yes, skip test for active diluent | |
| 1195 check_dil_common2: | |
| 1196 decf WREG,W ; 0-4 | |
| 1197 movwf hi ; Save tested diluent 0-4 | |
| 1198 lfsr FSR1,char_I_dil_change | |
| 1199 movff PLUSW1,lo ; Change depth into lo | |
| 1200 movlw minimum_change_depth | |
| 1201 cpfsgt lo ; Change depth>minimum_change_depth? | |
| 1202 return ; No, Change depth not deep enough, skip! | |
| 1203 movf xC+0,W ; load depth in m into WREG | |
| 1204 cpfsgt lo ; gas_change_depth < current depth? | |
| 1205 return ; No, check next gas | |
| 1206 incf hi,W ; 1-5 | |
| 1207 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 69 | 1208 movlw better_gas_window_neg |
| 1209 subwf lo,W ; Change depth-better_gas_window_neg | |
| 1210 cpfslt xC+0 ; current depth<Change depth-better_gas_window_neg? | |
| 0 | 1211 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 1212 return | |
| 1213 | |
| 1214 ;============================================================================= | |
| 1215 ; Setup everything to enter divemode. | |
| 1216 ; | |
| 1217 | |
| 1218 dive_boot_oc: | |
| 1219 extern get_first_gas_to_WREG | |
| 1220 call get_first_gas_to_WREG ; Gets first gas (0-4) into WREG | |
| 1221 movff WREG,char_I_first_gas ; Copy for compatibility | |
| 1222 movff WREG,active_gas ; Set for logbook and display | |
| 1223 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 1224 return | |
| 1225 | |
| 1226 dive_boot_cc: | |
| 1227 rcall divemode_setup_sensor_values ; setup sensor values | |
| 1228 TSTOSS opt_ccr_mode ; =0: Fixed SP, =1: Sensor | |
| 1229 movff char_I_setpoint_cbar+0,char_I_const_ppO2 ; Setup fixed Setpoint (Always start with SP1) | |
| 1230 extern get_first_dil_to_WREG | |
| 1231 call get_first_dil_to_WREG ; Gets first gas (0-4) into WREG | |
| 1232 movff WREG,char_I_first_gas ; Copy for compatibility | |
| 1233 movff WREG,active_gas ; Set for logbook and display | |
| 1234 rcall setup_dil_registers ; With WREG=Gas 0-4 | |
| 1235 return | |
| 1236 | |
| 1237 diveloop_boot: | |
| 1238 call restart_set_modes_and_flags | |
| 1239 | |
| 1240 call I2C_sleep_accelerometer ; Stop accelerometer | |
| 1241 call I2C_sleep_compass ; Stop compass | |
| 1242 | |
| 1243 clrf WREG | |
| 1244 movff WREG,max_pressure+0 ; clear some variables | |
| 1245 movff WREG,max_pressure+1 | |
| 1246 | |
| 1247 bcf use_agf ; Start with normal GF set | |
| 1248 bcf divemode_menu ; clear divemode menu flag | |
| 1249 movlw d'1' | |
| 1250 movwf apnoe_max_pressure+0 | |
| 1251 clrf apnoe_max_pressure+1 | |
| 1252 clrf apnoe_surface_mins | |
| 1253 clrf apnoe_surface_secs | |
| 1254 clrf apnoe_mins | |
| 1255 clrf divemins+0 | |
| 1256 clrf divemins+1 | |
| 1257 bcf no_more_divesecs ; =1: Do no longer show seconds in divemode | |
| 1258 bcf divemode_menu_active | |
| 1259 clrf menupos | |
| 1260 clrf menupos2 ; Reset to zero (Zero=no premenu or simulator task) | |
| 1261 | |
| 1262 bcf is_bailout ; =1: Bailout | |
| 1263 btfss FLAG_ccr_mode | |
| 1264 rcall dive_boot_oc | |
| 1265 btfsc FLAG_ccr_mode | |
| 1266 rcall dive_boot_cc | |
| 1267 | |
| 1268 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1269 clrf better_gas_number ; Clear better gas register | |
| 1270 | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1271 bcf show_safety_stop ;=1: Show the safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1272 clrf safety_stop_countdown ; Clear count-down |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1273 |
| 0 | 1274 clrf samplesecs |
| 1275 clrf apnoe_timeout_counter ; timeout in minutes | |
| 1276 clrf timeout_counter ; takes care of the timeout (Low byte) | |
| 1277 clrf timeout_counter2 ; takes care of the timeout (High byte) | |
| 1278 clrf AlarmType ; Clear all alarms | |
| 1279 bcf event_occured ; clear flag | |
| 98 | 1280 bcf event2_occured ; clear flag |
| 0 | 1281 clrf total_divetime_seconds+1 |
| 1282 clrf average_depth_hold_total+0 | |
| 1283 clrf average_depth_hold_total+1 | |
| 1284 clrf average_depth_hold_total+2 | |
| 1285 clrf average_depth_hold_total+3 ; Clear Non-Resettable Average | |
| 1286 rcall reset_average1 ; Reset the resettable average depth | |
| 1287 bcf decostop_active | |
| 1288 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1289 call ghostwriter_short_header ; Write short header with divenumber into profile memory | |
| 1290 | |
| 1291 btfsc simulatormode_active | |
| 1292 bra diveloop_boot_1 | |
| 1293 ; Normal mode = Surface pressure is the pressure 30mn before dive. | |
| 1294 SAFE_2BYTE_COPY last_surfpressure_30min, int_I_pres_surface ;copy surfacepressure to deco routine | |
| 1295 SAFE_2BYTE_COPY last_surfpressure_30min, last_surfpressure ;copy surfacepressure to last_surfpressure for correct depth | |
| 1296 bra diveloop_boot_2 | |
| 1297 | |
| 1298 diveloop_boot_1: | |
| 1299 ; Simulator mode: Surface pressure is 1bar. | |
| 1300 movlw LOW .1000 | |
| 1301 movff WREG,int_I_pres_surface+0 ; LOW copy surfacepressure to deco routine | |
| 1302 movlw HIGH .1000 | |
| 1303 movff WREG,int_I_pres_surface+1 ; HIGH copy surfacepressure to deco routine | |
| 1304 | |
| 1305 diveloop_boot_2: | |
| 1306 SAFE_2BYTE_COPY temperature,minimum_temperature ; Reset Min-Temp registers | |
| 1307 | |
| 1308 ; Init profile recording parameters | |
|
23
e402813343b6
new option to switch samplingrate between 10s and 2s
heinrichsweikamp
parents:
0
diff
changeset
|
1309 movff samplingrate,samplesecs_value ; to avoid EEPROM access in the ISR |
| 0 | 1310 movlw div_temperature |
| 1311 movwf divisor_temperature ; load divisors for profile storage | |
| 1312 movlw div_deco | |
| 1313 movwf divisor_deco | |
| 1314 movlw div_gf | |
| 1315 movwf divisor_gf | |
| 1316 movlw div_ppo2_sensors | |
| 1317 movwf divisor_ppo2_sensors | |
| 1318 movlw div_decoplan | |
| 1319 movwf divisor_decoplan | |
| 1320 movlw div_cns | |
| 1321 movwf divisor_cns | |
| 1322 movlw div_tank | |
| 1323 movwf divisor_tank | |
| 1324 | |
| 1325 btfss FLAG_apnoe_mode ; In Apnoe mode? | |
|
102
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1326 bra divemode_boot1 |
| 0 | 1327 ; Overwrite some parameters in Apnoe mode.... |
| 1328 movlw samplingrate_apnoe | |
| 1329 movwf samplesecs_value ; to avoid EEPROM access in the ISR | |
|
102
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1330 divemode_boot1: |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1331 btfsc FLAG_ccr_mode ; =1: CCR mode (Fixed ppO2 or Sensor) active |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1332 bra divemode_boot2 |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1333 ; in OC Mode, disable ppO2 logging |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1334 movlw .0 |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1335 movwf divisor_ppo2_sensors |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1336 divemode_boot2: |
| 0 | 1337 |
| 1338 bcf LEDg | |
| 1339 bcf LEDr | |
| 1340 bcf realdive | |
| 1341 btfss simulatormode_active ; do not disable in simulator mode! | |
| 1342 call disable_rs232 ; Disable RS232 | |
| 1343 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 1344 call enable_rs232 ; Also sets to speed_normal ... | |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1345 ; Reset divetime seconds |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1346 movlw .2 ; Start at 2seconds |
| 0 | 1347 movwf total_divetime_seconds+0 |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1348 movwf divesecs |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1349 movwf apnoe_secs |
| 0 | 1350 bsf divemode2 ; displayed divetime is running (Divetime starts HERE) |
| 1351 | |
| 1352 movff int_O_CNS_fraction+0,CNS_start+0 | |
| 1353 movff int_O_CNS_fraction+1,CNS_start+1 ; Save CNS value at beginning of dive | |
| 1354 movff char_O_relative_gradient_GF,GF_start ; Save GF value at beginning of dive | |
| 1355 return ; Done with divemode boot | |
| 1356 | |
| 1357 divemode_check_for_warnings: | |
| 131 | 1358 movlw .2 |
| 1359 cpfsgt warning_counter ; only two warnings active? | |
| 1360 bra divemode_check_for_warnings1 ; Yes, update every second | |
| 1361 | |
| 1362 btfss secs,0 ; Every two seconds... | |
| 1363 return | |
| 1364 btfss secs,1 ; Every four seconds... | |
| 0 | 1365 return |
| 1366 | |
| 131 | 1367 divemode_check_for_warnings1: |
| 0 | 1368 movf warning_counter_backup,W |
| 1369 cpfseq warning_counter ; warning_counter_backup = warning_counter? | |
| 1370 call TFT_clear_warning_text ; No, clear all warnings | |
| 1371 movff warning_counter,warning_counter_backup ; copy warning_counter | |
| 1372 | |
| 1373 bcf warning_active ; Clear flag | |
| 1374 clrf warning_counter ; Clear counter | |
| 1375 | |
| 1376 ; Warnings for all modes | |
| 1377 call check_warn_battery ; Check if the battery level should be displayed/warned | |
| 55 | 1378 call check_divetimeout ; Not actually a warning. Check and show the divemode timeout |
| 0 | 1379 |
| 1380 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 1381 bra divemode_check_for_warnings2 | |
| 1382 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 1383 bra divemode_check_for_warnings2 | |
| 1384 | |
| 1385 ; Warnings only in deco modes | |
| 1386 btfss FLAG_ccr_mode ; Don't check in CCR mode | |
| 1387 rcall check_ppO2 ; check ppO2 and displays warning, if required | |
| 1388 btfsc is_bailout ; But check in Bailout case... | |
| 1389 rcall check_ppO2 ; check ppO2 and displays warning, if required | |
| 1390 rcall check_cns_violation ; Check CNS value and display it, if required | |
| 1391 btfsc decostop_active ; In deco mode? | |
| 1392 rcall check_and_store_gf_violation ; Yes, Sets warnings, if required | |
| 1393 btfsc decostop_active ; In deco mode? | |
| 1394 call TFT_ftts ; Show @+x time | |
| 1395 btfsc use_agf ; In aGF mode? | |
| 1396 rcall warn_agf ; Yes, show a warning for it | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1397 btfsc setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1398 rcall warn_fallback ; Show the warning |
| 0 | 1399 |
| 1400 divemode_check_for_warnings2: | |
| 1401 ; Display the warning icon? | |
| 1402 btfsc warning_active ; Any warning active? | |
| 1403 call TFT_divemode_warning ; Yes | |
| 1404 btfss warning_active ; Any warning active? | |
| 1405 call TFT_divemode_warning_clear ; No, clear warning icon | |
| 1406 | |
| 1407 ; Setup warning_page number | |
| 1408 incf warning_page,F | |
| 1409 bcf STATUS,C | |
| 1410 rlcf warning_page,W ; *2 | |
| 1411 cpfsgt warning_counter ; > warning_counter | |
| 1412 clrf warning_page ; No, clear | |
| 1413 | |
| 1414 ; Clear 2nd row of warnings if there is nothing to show (on this page) | |
| 1415 btfss second_row_warning ; =1: The second row contains a warning | |
| 1416 call TFT_clear_warning_text_2nd_row ; No, clear this row | |
| 1417 return ; Done. | |
| 1418 | |
| 1419 global check_warn_battery | |
| 1420 check_warn_battery: | |
| 1421 movff batt_percent,lo | |
| 1422 movlw battery_show_level+1 | |
| 1423 cpfslt lo | |
| 1424 return ; No Display, no warning | |
| 1425 ; Display Battery, but warn? | |
| 1426 incf warning_counter,F ; increase counter | |
| 1427 call TFT_update_batt_percent_divemode ; Show percent | |
| 1428 | |
| 86 | 1429 movff batt_percent,lo |
| 0 | 1430 movlw color_code_battery_low+1 |
| 1431 cpfslt lo ; | |
| 1432 return ; No warning | |
| 1433 bsf warning_active ; Set Warning flag | |
| 1434 return | |
| 1435 | |
| 55 | 1436 check_divetimeout: |
| 1437 btfsc divemode2 | |
| 1438 return ; displayed divetime is not running | |
| 1439 incf warning_counter,F ; increase counter | |
| 1440 call TFT_divetimeout ; Show timeout counter | |
| 1441 return | |
| 1442 | |
| 1443 | |
| 0 | 1444 check_ppO2: ; check current ppO2 and display warning if required |
| 1445 SAFE_2BYTE_COPY amb_pressure, xA | |
| 1446 movlw d'10' | |
| 1447 movwf xB+0 | |
| 1448 clrf xB+1 | |
| 1449 call div16x16 ; xC=p_amb/10 | |
| 1450 | |
| 1451 movff xC+0,xA+0 | |
| 1452 movff xC+1,xA+1 | |
| 1453 movff char_I_O2_ratio,xB+0 ; =O2 ratio | |
| 1454 clrf xB+1 | |
| 1455 call mult16x16 ; char_I_O2_ratio * p_amb/10 | |
| 1456 | |
| 1457 ; Check very high ppO2 manually | |
| 1458 tstfsz xC+2 ; char_I_O2_ratio * p_amb/10 > 65536, ppO2>6,55bar? | |
| 1459 bra check_ppO2_1 ; Yes, display Value! | |
| 1460 ; Check if ppO2>3,30bar | |
| 1461 btfsc xC+1,7 | |
| 1462 bra check_ppO2_1 ; Yes! | |
| 1463 | |
| 1464 ; Check for low ppo2 | |
| 1465 movff xC+0,sub_b+0 | |
| 1466 movff xC+1,sub_b+1 | |
| 1467 movff opt_ppO2_min,WREG | |
| 1468 mullw d'100' ; opt_ppO2_min*100 | |
| 1469 movff PRODL,sub_a+0 | |
| 1470 movff PRODH,sub_a+1 | |
| 1471 call subU16 | |
| 1472 btfsc neg_flag | |
| 1473 bra check_ppO2_0 ; Not too low | |
| 1474 ; ppO2 low | |
| 1475 incf warning_counter,F ; increase counter | |
| 1476 call TFT_display_ppo2 ; Show ppO2 | |
| 1477 movlw d'4' ; Type of Alarm (ppO2 low) | |
| 1478 movwf AlarmType ; Copy to Alarm Register | |
| 1479 bsf event_occured ; Set Event Flag | |
| 1480 bsf warning_active ; Set Warning flag | |
| 1481 return ; Done. | |
| 1482 | |
| 1483 check_ppO2_0: | |
| 1484 ; Check if ppO2 should be displayed | |
| 1485 movlw ppo2_display_high | |
| 1486 mullw d'100' ; ppo2_display_high*100 | |
| 1487 movff PRODL,sub_a+0 | |
| 1488 movff PRODH,sub_a+1 | |
| 1489 call subU16 | |
| 1490 btfss neg_flag | |
| 1491 return ; No Display, no warning | |
| 1492 ; Display ppO2, but warn? | |
| 1493 incf warning_counter,F ; increase counter | |
| 1494 call TFT_display_ppo2 ; Show ppO2 | |
| 1495 | |
| 1496 ;check if we are within our warning thresholds! | |
| 1497 movff xC+0,sub_b+0 | |
| 1498 movff xC+1,sub_b+1 | |
| 1499 movff opt_ppO2_max,WREG ; PPO2 Max for MOD calculation and color coding in divemode | |
| 69 | 1500 addlw .1 ; e.g. >1.60 |
| 0 | 1501 mullw d'100' ; opt_ppO2_max*100 |
| 1502 movff PRODL,sub_a+0 | |
| 1503 movff PRODH,sub_a+1 | |
| 1504 call subU16 | |
| 1505 btfss neg_flag | |
| 1506 return ; Done. Not too high | |
| 1507 movlw d'5' ; Type of Alarm (ppO2 high) | |
| 1508 movwf AlarmType ; Copy to Alarm Register | |
| 1509 bsf event_occured ; Set Event Flag | |
| 1510 bsf warning_active ; Set Warning flag | |
| 1511 return ; Done. | |
| 1512 | |
| 1513 check_ppO2_1: ; ppO2 very high | |
| 1514 incf warning_counter,F ; increase counter | |
| 1515 call TFT_display_ppo2 ; Show ppO2 | |
| 1516 movlw d'5' ; Type of Alarm | |
| 1517 movwf AlarmType ; Copy to Alarm Register | |
| 1518 bsf event_occured ; Set Event Flag | |
| 1519 bsf warning_active ; Set Warning flag | |
| 1520 return ; Done. | |
| 1521 | |
| 1522 global check_cns_violation | |
| 1523 check_cns_violation: | |
| 1524 ; Check if CNS should be displayed | |
| 1525 movff int_O_CNS_fraction+1,lo ; copy into bank1 | |
| 1526 tstfsz lo ; >255% ? | |
| 1527 bra check_cns_violation2 ; Yes | |
| 1528 movff int_O_CNS_fraction+0,lo ; copy into bank1 | |
| 1529 | |
| 1530 movlw cns_warning_high ; cns_warning_high | |
| 1531 subwf lo,W | |
| 1532 btfsc STATUS,C | |
| 1533 bsf warning_active ; Set Warning flag | |
| 1534 | |
| 1535 movlw cns_display_high ; cns_display_high | |
| 1536 subwf lo,W | |
| 1537 btfss STATUS,C | |
| 1538 return ; No Display, no warning | |
| 1539 ; Display CNS | |
| 1540 incf warning_counter,F ; increase counter | |
| 1541 call TFT_display_cns ; Show CNS | |
| 1542 return | |
| 1543 | |
| 1544 check_cns_violation2: | |
| 1545 incf warning_counter,F ; increase counter | |
| 1546 call TFT_display_cns ; Show CNS | |
| 1547 bsf warning_active ; Set Warning flag | |
| 1548 return | |
| 1549 | |
| 1550 global check_and_store_gf_violation | |
| 1551 check_and_store_gf_violation: | |
| 1552 movff char_O_gradient_factor,lo ; gradient factor absolute (Non-GF model) | |
| 1553 movff char_I_deco_model,hi | |
| 1554 decfsz hi,F ; jump over next line if char_I_deco_model == 1 | |
| 1555 movff char_O_relative_gradient_GF,lo ; gradient factor relative (GF model) | |
| 1556 | |
| 1557 movlw gf_warning_high | |
| 1558 cpfsgt lo | |
| 1559 bra check_and_store_gf_violation2 ; No warning | |
| 1560 movlw d'2' ; Type of Alarm | |
| 1561 movwf AlarmType ; Copy to Alarm Register | |
| 1562 bsf event_occured ; Set Event Flag | |
| 1563 bsf warning_active ; Set Warning flag | |
| 1564 check_and_store_gf_violation2: | |
| 1565 movlw gf_display_high | |
| 1566 cpfsgt lo | |
| 1567 return ; No Display, no warning | |
| 1568 ; Display GF | |
| 1569 incf warning_counter,F ; increase counter | |
| 1570 call TFT_warning_gf ; Show GF Warning | |
| 1571 return | |
| 1572 | |
| 1573 warn_agf: | |
| 1574 incf warning_counter,F ; increase counter | |
| 1575 call TFT_warning_agf ; Show aGF warning | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1576 return |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1577 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1578 warn_fallback: |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1579 incf warning_counter,F ; increase counter |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1580 call TFT_warning_fallback ; Show fallback warning |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1581 bsf warning_active ; Set Warning flag |
| 0 | 1582 return |
| 1583 | |
| 1584 | |
| 1585 END |