Mercurial > public > hwos_code
annotate src/ostc3.inc @ 20:9b7dd3103545
minor cleanup
| author | heinrichsweikamp |
|---|---|
| date | Wed, 03 Jul 2013 23:19:57 +0200 |
| parents | 4e3f133dfbf4 |
| children | e402813343b6 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 3 ; File ostc3.asm | |
| 4 ; | |
| 5 ; OSTC3 Platform definitions | |
| 6 ; | |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code. | |
| 11 | |
| 12 ;============================================================================= | |
| 13 | |
| 14 LIST P=18F87K22 ; change also: Configure->SelectDevice from Mplab | |
| 15 | |
| 16 ;#DEFINE __DEBUG | |
| 17 | |
| 18 #include <p18f87k22.inc> | |
| 19 #include <ports.inc> ; Portmap | |
| 20 | |
| 21 #DEFINE softwareversion_x d'0' ; Software version XX.YY | |
| 17 | 22 #DEFINE softwareversion_y d'97' ; Software version XX.YY |
| 0 | 23 #DEFINE softwareversion_beta 0 ; (and 0 for release) |
| 24 | |
| 25 #DEFINE comm_service_key 0xABCDEF | |
| 26 | |
| 27 ;----------------------------------------------------------------------------- | |
| 28 | |
| 29 #DEFINE CCP1CON_VALUE b'00001100' ; PWM1 for LED dimming | |
| 30 #DEFINE T2CON_ECO b'00000100' ; 1:1 Postscaler, 1:1 Prescaler, Timer 2 start -> 980Hz (Good compromise of no-flicker and efficiency) | |
| 31 #DEFINE T2CON_NORMAL b'00001110' | |
| 32 #DEFINE T2CON_FASTEST b'00001110' ; 1:2 Postscaler, 1:16 Prescaler, Timer 2 start -> 1960Hz (no-flicker) | |
| 33 | |
| 34 ; Timing for button hold-down flags | |
| 35 #DEFINE TMR1H_VALUE_FIRST .255-.128 ; in steps of 7,8125ms -> 1s | |
| 36 #DEFINE TMR1H_VALUE_CONT .255-.32 ; in steps of 7,8125ms -> 0.25s | |
| 37 #DEFINE TMR1H_VALUE_CONT_DIVE .255-.64 ; in steps of 7,8125ms -> 0.5s | |
| 38 | |
| 39 ; Color Definitions: 8Bit RGB b'RRRGGGBB' | |
| 40 #DEFINE color_red b'11100000' ; (7,0,0) | |
| 41 #DEFINE color_dark_red b'10000101' ; (4,1,1) | |
| 42 #DEFINE color_violet b'11101011' ; (7,2,3) | |
| 43 #DEFINE color_blue b'11000111' ; (6,1,3) | |
| 44 #DEFINE color_green b'00011100' ; (0,7,0) | |
| 45 #DEFINE color_greenish b'00111110' ; (1,7,2) | |
| 46 #DEFINE color_dark_green b'00111001' ; (1,6,1) | |
| 47 #DEFINE color_yellow b'11111101' ; (7,7,1) | |
| 48 #DEFINE color_white b'11111111' ; (7,7,3) | |
| 49 #DEFINE color_black b'00000000' ; (0,0,0) | |
| 50 #DEFINE color_deepblue b'00000010' ; (0,0,2) | |
| 51 #DEFINE color_grey b'11011111' ; (6,7,3) | |
| 52 #DEFINE color_cyan b'11011111' ; (6,7,3) | |
| 53 #DEFINE color_lightblue b'11011011' ; (6,7,3) | |
| 54 #DEFINE color_orange b'11111000' ; (7,6,0) | |
| 55 #DEFINE color_pink b'11111010' ; (7,6,2) | |
| 56 | |
| 57 #DEFINE FT_TINY .0 | |
| 58 #DEFINE FT_SMALL .1 | |
| 59 #DEFINE FT_MEDIUM .2 | |
| 60 #DEFINE FT_LARGE .3 | |
| 61 | |
| 62 #DEFINE warn_depth .1 | |
| 63 #DEFINE warn_cns .2 | |
| 64 #DEFINE warn_gf .3 | |
| 65 #DEFINE warn_ppo2 .4 | |
| 66 #DEFINE warn_velocity .5 | |
| 67 #DEFINE warn_ceiling .6 | |
| 68 #DEFINE warn_gas_in_gaslist .7 | |
| 69 #DEFINE warn_ppo2_hud .8 | |
| 70 #DEFINE warn_battery .9 | |
| 71 | |
| 72 | |
| 73 ; Profile recording parameters | |
| 74 #DEFINE logbook_profile_version 0x23 | |
| 75 #DEFINE samplingrate .10 ; [seconds] | |
| 76 #DEFINE samplingrate_apnoe .1 ; [seconds] | |
| 77 ; Warning: Divisors must be <.16 ! | |
| 78 #DEFINE div_temperature .6 ; x samplingrate [s] | |
| 79 #DEFINE div_deco .6 ; x samplingrate [s] | |
| 80 #DEFINE div_gf .12 ; x samplingrate [s] | |
| 81 #DEFINE div_ppo2_sensors .2 ; x samplingrate [s] | |
| 82 #DEFINE div_decoplan .12 ; x samplingrate [s] | |
| 83 #DEFINE div_cns .12 ; x samplingrate [s] | |
| 84 #DEFINE div_tank .0 ; x samplingrate [s] | |
| 85 ; Warning: Information lengths must be <.16 ! | |
| 86 #DEFINE infolength_temperature .2 ; [byte] | |
| 87 #DEFINE infolength_deco .2 ; [byte] | |
| 88 #DEFINE infolength_gf .1 ; [byte] | |
| 89 #DEFINE infolength_ppo2_sensors .9 ; [byte] | |
| 90 #DEFINE infolength_decoplan .15 ; [byte] | |
| 91 #DEFINE infolength_cns .2 ; [byte] | |
| 92 #DEFINE infolength_tank .0 ; [byte] | |
| 93 | |
| 94 ; "Better Gas" behavior | |
| 95 ; better_gas_window <= minimum_change_depth ! | |
| 96 ; minimum_change_depth >=5 ! | |
| 97 #DEFINE minimum_change_depth .3 ; [m] | |
| 98 #DEFINE better_gas_window .3 ; [m] | |
| 99 | |
| 100 ; Dive mode limits and thresholds | |
| 101 #DEFINE start_dive_threshold .100 ; [cm] | |
| 102 #DEFINE high_altitude_dive_threshold .300;[cm] | |
| 103 #DEFINE apnoe_timeout .30 ; [min] | |
| 104 #DEFINE divemode_menuview_timeout .10 ; [s] | |
| 105 #DEFINE divemode_timeout .300 ; [s] | |
| 106 #DEFINE divemode_menu_timeout .30 ; [s] | |
| 107 #DEFINE ppo2_warning_low .19 ; [cbar] (Default value) | |
| 108 #DEFINE ppo2_lowest_setting .16 ; [cbar] (Minimum value) | |
| 109 #DEFINE ppo2_display_high .120 ; [cbar] | |
| 110 #DEFINE ppo2_warning_high .160 ; [cbar] (Default value) | |
| 111 #DEFINE ppo2_highest_setting .160 ; [cbar] (Max. Value) | |
| 112 #DEFINE cns_display_high .70 ; [%] | |
| 113 #DEFINE cns_warning_high .100 ; [%] | |
| 114 #DEFINE gf_display_high .75 ; [%] | |
| 115 #DEFINE gf_warning_high .100 ; [%] | |
| 116 #DEFINE depth_warn_mbar .13000 ; [mbar] | |
| 117 #DEFINE wake_up_from_sleep .1160 ; [mbar] | |
| 118 #DEFINE gf_display_threshold .20 ; [%] | |
| 119 #DEFINE simulator_start_depth .2500 ; [mbar] + 1000mbar surface | |
| 120 #DEFINE simulator_timeout .15 ; [s] | |
| 121 | |
| 122 | |
| 123 ; Surface mode limits and thresholds | |
| 124 #DEFINE cns_display_surface_high .70 ; [%] | |
| 125 #DEFINE high_altitude_threshold .880 ; [mbar] | |
| 126 #DEFINE max_surfpressure .1080 ; [mbar] | |
| 127 #DEFINE timeout_surfacemode .90 ; [s] | |
| 128 | |
| 129 | |
| 130 ; Decomodel paramters | |
| 131 #DEFINE no_fly_time_ratio .60 ; [%] | |
| 132 #DEFINE deco_distance .10 ; [dm] | |
| 133 | |
| 134 | |
| 135 ; Color-code parameters for the divemode | |
| 136 #DEFINE color_code_cns_high .100 ; [%] | |
| 137 #DEFINE color_code_gf_warn_high .101 ; [%] | |
| 138 #DEFINE color_code_velocity_warn_high .10;[m/min] | |
| 139 | |
| 140 ; Velocity threshold | |
| 141 #DEFINE velocity_warning_level_1 .7 ; [m/min] | |
| 142 | |
| 143 ; Battery thresholds | |
|
2
ab8a7c3f1db0
battery warning levels, max. brightnes setting
heinrichsweikamp
parents:
0
diff
changeset
|
144 #DEFINE lithium_36v_empty .2800 ; [mV] Saft 3,6V LS14500 AA - threshold for battery percent display |
| 0 | 145 #DEFINE lithium_36v_low .2000 ; [mV] (Must be bigger then aa_15v_high!) |
| 146 #DEFINE aa_15v_high .1550 ; [mV] Energizer 1,5V E2 AA | |
| 147 #DEFINE aa_15v_low .1100 ; [mV] According to Energizer Datasheet EBC-4201R, Page 2 | |
| 148 #DEFINE color_code_battery_low .15 ; [%] | |
| 149 #DEFINE battery_show_level .30 ; [%] | |
| 150 | |
| 151 #DEFINE current_sleepmode .62 | |
| 152 #DEFINE current_backlight_multi .115 ; *CCPR1L+current_backlight_offset | |
| 153 #DEFINE current_backlight_offset .216 | |
| 154 #DEFINE current_speed_eco .1914 | |
| 155 #DEFINE current_speed_normal .4027 | |
| 156 #DEFINE current_speed_fastest .5050 | |
| 157 #DEFINE current_ir_reciever .139 | |
| 158 #DEFINE current_compass .28 | |
| 159 | |
| 160 ; Brightness thresholds (between zero (off) and 255 (max. power)) | |
|
2
ab8a7c3f1db0
battery warning levels, max. brightnes setting
heinrichsweikamp
parents:
0
diff
changeset
|
161 #DEFINE ambient_light_max_high_36V .175 ; When used with a 3,6V battery |
|
ab8a7c3f1db0
battery warning levels, max. brightnes setting
heinrichsweikamp
parents:
0
diff
changeset
|
162 #DEFINE ambient_light_max_high .150 |
| 0 | 163 #DEFINE ambient_light_min_high .40 |
|
2
ab8a7c3f1db0
battery warning levels, max. brightnes setting
heinrichsweikamp
parents:
0
diff
changeset
|
164 #DEFINE ambient_light_max_medium .135 |
| 0 | 165 #DEFINE ambient_light_min_medium .30 |
|
2
ab8a7c3f1db0
battery warning levels, max. brightnes setting
heinrichsweikamp
parents:
0
diff
changeset
|
166 #DEFINE ambient_light_max_eco .110 |
|
15
8185edeeedb2
reduce eco low brightness threshold (for cave diving)
heinrichsweikamp
parents:
14
diff
changeset
|
167 #DEFINE ambient_light_min_eco .15 |
| 0 | 168 |
| 169 ; IR Link timeout | |
| 170 #DEFINE ir_timeout_value .48 ; multiples of 62,5ms | |
| 171 | |
| 172 ; Gaslist hard-coded limits | |
| 173 #DEFINE gaslist_min_o2 .7 ; Minimum O2 [%] | |
| 174 #DEFINE gaslist_max_change_depth .100 ; Max. change depth [m] | |
| 175 #DEFINE gaslist_sp_stepsize .10 ; Steps for Setpoint Setup [cbar] | |
| 176 #DEFINE gaslist_sp_max .160 ; Max. Setpoint [cbar] | |
| 177 #DEFINE gaslist_sp_min .50 ; Min. Setpoint [cbar] | |
| 178 | |
|
16
7b06f20881be
calm compass reading for minor heading changes
heinrichsweikamp
parents:
15
diff
changeset
|
179 ; Compass display |
|
7b06f20881be
calm compass reading for minor heading changes
heinrichsweikamp
parents:
15
diff
changeset
|
180 #DEFINE compass_fast_treshold .12 ; Faster update if new and old > compass_fast_treshold |
|
7b06f20881be
calm compass reading for minor heading changes
heinrichsweikamp
parents:
15
diff
changeset
|
181 |
| 0 | 182 ;---------------------------- Macros ------------------------------------ |
| 183 | |
| 184 TSTOSS macro opt_reg ; TeST Option Skip if not Zero | |
| 185 movff opt_reg,WREG | |
| 186 tstfsz WREG,A | |
| 187 bra $+4 | |
| 188 endm | |
| 189 | |
| 190 ;---------------------------- Bank0 DATA ------------------------------------ | |
| 191 isr_backup equ 0x60 | |
| 192 isr_backup udata_ovr isr_backup ; Reserved space for interupt data | |
| 193 | |
| 194 ;---- Backup for general registers | |
| 195 isr_prod res 2 | |
| 196 | |
| 197 ;---- MS5541 subroutines | |
| 198 amb_pressure res 2 | |
| 199 temperature res 2 | |
| 200 | |
| 201 W1 res 2 ; Raw (packed) calibration data | |
| 202 W2 res 2 | |
| 203 W3 res 2 | |
| 204 W4 res 2 ; 100 | |
| 205 C1 res 2 ; Decoded calibration data | |
| 206 C2 res 2 | |
| 207 C3 res 2 | |
| 208 C4 res 2 ; Here: C4-250 | |
| 209 C5 res 2 ; Here: Reference Temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760) | |
| 210 C6 res 2 | |
| 211 D1 res 2 ; raw pressure | |
| 212 D2 res 2 ; raw temperature | |
| 213 xdT res 2 | |
| 214 xdT2 res 2 | |
| 215 OFF res 2 | |
| 216 SENS res 2 | |
| 217 dLSB res 1 ;Pressure sensor interface | |
| 218 dMSB res 1 | |
| 219 clock_count res 1 | |
| 220 sensor_state_counter res 1 ; counts to eight for state maschine | |
| 221 amb_pressure_avg res 2 | |
| 222 temperature_avg res 2 | |
| 223 minimum_temperature res 2 ; minimum temperature | |
| 224 last_temperature res 2 | |
| 225 last_pressure res 2 | |
| 226 last_pressure_velocity res 2 ; For velocity | |
| 227 last_surfpressure res 2 | |
| 228 last_surfpressure_15min res 2 | |
| 229 last_surfpressure_30min res 2 | |
| 230 rel_pressure res 2 | |
| 231 sim_pressure res 2 ; hold simulated pressure in mbar if in Simulator mode | |
| 232 max_pressure res 2 | |
| 233 avr_rel_pressure res 2 | |
| 234 avr_rel_pressure_total res 2 | |
| 235 ;---- Data for ISR math subroutines | |
| 236 isr_xC res 4 | |
| 237 isr_xA res 2 | |
| 238 isr_xB res 2 | |
| 239 | |
| 240 ;---- Data for ISR routines | |
| 241 isr1_temp res 1 ; ISR temp variable, used in ms5541.asm, isr_rtcc, isr_battery_gauge | |
| 242 isr2_temp res 1 ; ISR temp variable, used isr_battery_gauge | |
| 243 | |
| 244 ;---- Display brightness | |
| 245 max_CCPR1L res 1 ; Max. brightness value for CCPR1L | |
| 246 | |
| 247 ; Battery gauge (nAs, nC) | |
| 248 battery_gauge res 6 ; 48Bit -> 78Ah max... | |
| 249 | |
| 250 ; IR-Link | |
| 251 ir_buffer res .16 | |
| 252 ir_counter res 1 | |
| 253 ir_timeout res 1 ; Timeout for valid data | |
| 254 | |
| 255 ; Compass raw data | |
| 256 compass_DX res 2 | |
| 257 compass_DY res 2 | |
| 258 compass_DZ res 2 | |
| 259 | |
| 260 accel_DX res 2 | |
| 261 accel_DY res 2 | |
| 262 accel_DZ res 2 | |
| 263 | |
| 264 ; Compass FILTERED data | |
| 265 compass_DX_f res 2 | |
| 266 compass_DY_f res 2 | |
| 267 compass_DZ_f res 2 | |
| 268 | |
| 269 accel_DX_f res 2 | |
| 270 accel_DY_f res 2 | |
| 271 accel_DZ_f res 2 | |
| 272 | |
| 273 ; Compass calibration data | |
| 274 compass_CX_f res 2 | |
| 275 compass_CY_f res 2 | |
| 276 compass_CZ_f res 2 | |
| 277 | |
| 278 ; Compass more data | |
| 279 compass_heading res 2 ; Corrected heading (in 1°) : -180 .. 180 | |
|
16
7b06f20881be
calm compass reading for minor heading changes
heinrichsweikamp
parents:
15
diff
changeset
|
280 compass_heading_old res 2 ; Old heading (For smoother display) |
| 0 | 281 compass_roll res 2 ; Rotation around the X axis |
| 282 compass_pitch res 2 ; Rotation arounf the Y axis | |
| 283 | |
| 284 compass_a res 2 ; Tmp data for Q15 arithmetics | |
| 285 compass_b res 2 | |
| 286 compass_r res 3 | |
| 287 | |
| 288 CNS_start res 2 ; CNS value at beginning of dive | |
| 289 GF_start res 1 ; GF value at beginning of dive | |
| 290 | |
| 291 ;---------------------------- Common DATA ------------------------------------ | |
| 292 | |
| 293 common equ 0x100 ; Alias for "banksel common" | |
| 294 common udata_ovr common ; Bank1 general variables | |
| 295 | |
| 296 ;---- Time and Date | |
| 297 secs res 1 | |
| 298 mins res 1 | |
| 299 hours res 1 | |
| 300 day res 1 | |
| 301 month res 1 | |
| 302 year res 1 | |
| 303 surface_interval res 2 | |
| 304 | |
| 305 flag1 res 1 | |
| 306 flag2 res 1 | |
| 307 flag3 res 1 | |
| 308 flag4 res 1 | |
| 309 flag5 res 1 | |
| 310 flag6 res 1 | |
| 311 flag7 res 1 | |
| 312 flag8 res 1 | |
|
16
7b06f20881be
calm compass reading for minor heading changes
heinrichsweikamp
parents:
15
diff
changeset
|
313 flag9 res 1 |
| 0 | 314 |
| 315 temp1 res 1 | |
| 316 temp2 res 1 | |
| 317 | |
| 318 ;---- Interface to wait macros | |
| 319 wait_temp res 1 | |
| 320 waitms_temp res 1 | |
| 321 | |
| 322 ;---- Interface to graphic subroutines (aa_wordprocessor, color_processor, ...) | |
| 323 win_leftx2 res 1 | |
| 324 win_top res 1 | |
| 325 win_width res 2 | |
| 326 win_height res 1 | |
| 327 win_bargraph res 1 | |
| 328 win_color1 res 1 | |
| 329 win_color2 res 1 | |
| 330 win_font res 1 | |
| 331 win_invert res 1 | |
| 332 | |
| 333 ;---- Draw subroutines | |
| 334 tft_temp4 res 1 | |
| 335 tft_temp3 res 1 | |
| 336 tft_temp2 res 1 | |
| 337 tft_temp1 res 1 | |
| 338 | |
| 339 ;---- data conversion subroutines | |
| 340 lo res 1 | |
| 341 hi res 1 | |
| 342 up res 1 | |
| 343 | |
| 344 ;---- RS232 temp variables | |
| 345 uart1_temp res 1 | |
| 346 uart2_temp res 1 | |
| 347 | |
| 348 ;---- Data for math subroutines | |
| 349 divA res 2 | |
| 350 divB res 1 | |
| 351 xC res 4 | |
| 352 xA res 2 | |
| 353 xB res 2 | |
| 354 sub_c res 2 | |
| 355 sub_a res 2 | |
| 356 sub_b res 2 | |
| 357 | |
| 358 ;---- Data for conversion subroutines | |
| 359 cvt_flags res 1 | |
| 360 ignore_digits res 1 | |
| 361 | |
| 362 #define leftbind cvt_flags,0 | |
| 363 #define ignore_digit3 cvt_flags,1 | |
| 364 #define ignore_digit4 cvt_flags,2 | |
| 365 #define ignore_digit5 cvt_flags,3 | |
| 366 #DEFINE enable_screen_dumps cvt_flags,4 ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 367 | |
| 368 ;---- Misc. | |
| 369 speed_setting res 1 ; =1: Eco, =2: Normal, =3: Fastest | |
| 370 nofly_time res 2 ; No Fly time in Minutes (Calculated after Dive) | |
| 371 timeout_counter res 1 | |
| 372 timeout_counter2 res 1 | |
| 373 timeout_counter3 res 1 | |
| 374 batt_voltage res 2 ; Battery voltage in mV | |
| 375 batt_percent res 1 ; Battery in percent (1-100) | |
| 376 ambient_light res 2 ; ambient_light level | |
| 377 lo_temp res 1 | |
| 378 hi_temp res 1 | |
| 379 desaturation_time res 2 | |
| 380 convert_value_temp res 3 ; used in menu_battery_state_convert_date | |
| 381 active_gas res 1 | |
| 382 decoplan_page res 1 | |
| 383 warning_counter res 1 ; Counts amount of warning in divemode | |
| 384 warning_counter_backup res 1 ; Backup of warning_counter | |
| 385 warning_page res 1 ; current # of warning page | |
| 386 rssi_value res 1 ; Current RSSI level | |
| 387 | |
| 388 ; Remind history for menu processor (and such): | |
| 389 menustack res 5 ; menu stack | |
| 390 menupos res 1 ; Logbook and divemode menu | |
| 391 menupos2 res 1 ; For dive mode simulator and pre-menu | |
| 392 menupos3 res 1 ; For Customviews | |
| 393 menupos4 res 1 ; For divemode menu | |
| 394 | |
| 395 ; Apnoe stuff that must be in bank common | |
| 396 apnoe_mins res 1 | |
| 397 apnoe_secs res 1 | |
| 398 apnoe_max_pressure res 2 | |
| 399 | |
| 400 ; Divemode | |
| 401 divemins res 2 | |
| 402 divesecs res 1 | |
| 403 samplesecs_value res 1 | |
| 404 divisor_temperature res 1 | |
| 405 divisor_deco res 1 | |
| 406 divisor_gf res 1 | |
| 407 divisor_ppo2_sensors res 1 | |
| 408 divisor_decoplan res 1 | |
| 409 divisor_cns res 1 | |
| 410 divisor_tank res 1 | |
| 411 average_depth_hold res 4 | |
| 412 average_depth_hold_total res 4 | |
| 413 total_divetime_seconds res 2 | |
| 414 average_divesecs res 2 ; For the resettable stopwatch | |
| 415 decodata res 2 | |
| 416 apnoe_timeout_counter res 1 | |
| 417 apnoe_surface_mins res 1 | |
| 418 apnoe_surface_secs res 1 | |
| 419 | |
| 420 | |
| 421 ; Profile storing | |
| 422 AlarmType res 1 | |
| 423 samplesecs res 1 | |
| 424 EventByte res 1 | |
| 425 ProfileFlagByte res 1 | |
| 426 | |
| 427 ; External flash | |
| 428 ext_flash_address res 3 ; 24bit Address | |
| 429 ext_flash_log_pointer res 3 ; 24bit Address for logbook profile storing | |
| 430 ext_flash_dive_counter res 3 ; 24bit Counter for dive length (increased in write_byte_ext_flash_plus) | |
| 431 | |
| 432 ; I2C | |
| 433 i2c_temp res 1 ; Temp | |
| 434 | |
| 435 ; MCP | |
| 436 mcp_temp res 4 ; For RX | |
| 437 | |
| 438 ; O2 Sensor data | |
| 439 o2_mv_sensor1 res 2 ; in 0.1mV steps | |
| 440 o2_mv_sensor2 res 2 ; in 0.1mV steps | |
| 441 o2_mv_sensor3 res 2 ; in 0.1mV steps | |
| 442 o2_ppo2_sensor1 res 1 ; Sensor1 ppO2 (in 0.01bar steps) | |
| 443 o2_ppo2_sensor2 res 1 ; Sensor2 ppO2 (in 0.01bar steps) | |
| 444 o2_ppo2_sensor3 res 1 ; Sensor3 ppO2 (in 0.01bar steps) | |
| 445 hud_battery_mv res 2 | |
| 446 hud_status_byte res 1 | |
| 447 ;Status Byte/ | |
| 448 ;Bit0 = 1 -> HUD connection ok | |
| 449 ;Bit1 = 1 -> HUD is calibrated | |
| 450 ;Bit2 = 1 -> HUD Battery is low (<3000mV) | |
| 451 ;Bit3 = 1 -> Sensor 1 active | |
| 452 ;Bit4 = 1 -> Sensor 2 active | |
| 453 ;Bit5 = 1 -> Sensor 3 active | |
| 454 ;Bit6 unused in stand-alone HUD | |
| 455 ;Bit7 unused in stand-alone HUD | |
| 456 | |
| 457 sensor_setpoint res 1 ; sensor ppo2 in 0.01bar for deco routine | |
| 458 | |
| 459 better_gas_number res 1 ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 460 | |
| 461 ;---------------------------- TMP DATA --------------------------------------- | |
| 462 ; Space for various overlayed data from color, word, menu processors, etc. | |
| 463 ; | |
| 464 | |
| 465 tmp udata_ovr 0x1A0 ; Bank1 shared TMP space | |
| 466 tmp equ 0x1A0 ; Alias for CBLOCK directive. | |
| 467 res 0x060 ; RESERVED area. | |
| 468 | |
| 469 ;----------------------------------------------------------------------------- | |
| 470 ; Reserve BANK2 for general purpose buffer (strings, images, etc). | |
| 471 ; NOTE: Needs to be aligned with a bank (LOW(buffer)==0). | |
| 472 buffer udata_ovr 0x200 | |
| 473 buffer res .256 | |
| 474 | |
| 475 opt_table equ 0xE00 | |
| 476 opt_table udata_ovr opt_table | |
| 477 | |
| 478 ;---- Dive Options | |
| 479 opt_gas_O2_ratio res 5 ; Needed because deco gaslist use N2 | |
| 480 opt_dil_O2_ratio res 5 ; Must be in line with opt_gas_O2_ratio | |
| 481 opt_gas_He_ratio res 5 ; He ratio Gas1-5 | |
| 482 opt_dil_He_ratio res 5 ; Must be in line with opt_gas_He_ratio | |
| 483 opt_gas_type res 5 ; 0=Disabled, 1=First, 2=Travel, 3=Deco | |
| 484 opt_dil_type res 5 ; 0=Disabled, 1=First, 2=Normal | |
| 485 opt_dive_mode res 1 ; 0=OC, 1=CC, 2=Gauge, 3=Apnea | |
| 486 opt_ppO2_max res 1 ; PPO2 Max for MOD calculation and color coding in divemode | |
| 487 opt_ccr_mode res 1 ; =0: Fixed SP, =1: Sensor | |
| 488 opt_ppO2_min res 1 ; PPO2 min for Sensors and color coding in divemode | |
| 489 | |
| 490 ;---- Managing Settings | |
| 491 | |
| 492 opt_brightness res 1 ; =0: Eco, =1:Medium, =2:Full | |
| 493 opt_salinity res 1 ; 0-5% | |
| 494 #DEFINE opt_name_length .60 ; Custom text string 5 rows with 12 chars | |
| 495 opt_name res opt_name_length | |
| 496 opt_language res 1 ; Current language. 0=EN, 1=DE, 2=FR, 3=SP | |
| 497 opt_units res 1 ; 0:m/°C, 1:ft/°F | |
| 498 opt_dateformat res 1 ; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD | |
| 499 opt_last_stop res 1 ; =3:3m, =4:4m, =5:5m, =6:6m | |
| 500 opt_aGF_high res 1 ; Alternative GF HIGH | |
| 501 opt_aGF_low res 1 ; Alternative GF LOW | |
| 502 opt_GF_high res 1 ; GF HIGH | |
| 503 opt_GF_low res 1 ; GF LOW | |
| 504 opt_enable_aGF res 1 ; =1: aGF can be selected underwater | |
|
18
4e3f133dfbf4
add new opt_compass_gain option to work with more magnetic battery types
heinrichsweikamp
parents:
17
diff
changeset
|
505 opt_compass_gain res 1 ; 0-7 (230LSB/Gauss to 1370LSB/Gaus) |
| 0 | 506 |
| 507 ;-----------------------------EEPROM DATA ------------------------------------ | |
| 508 ; Automatic reset of all options when this is changed: | |
| 509 #define eeprom_opt_serial 0x0005 ; Version 0.5 | |
| 510 | |
| 511 ;----------------------------------------------------------------------------- | |
| 512 ; Flags | |
| 513 #DEFINE switch_left flag1,0 | |
| 514 #DEFINE switch_right flag1,1 | |
| 515 #DEFINE neg_flag flag1,2 ; e.g. sub16 (sub_c = sub_a - sub_b) | |
| 516 #DEFINE pressure_refresh flag1,3 ; =1: A new pressure/temperature is available | |
| 517 #DEFINE sleepmode flag1,4 ; =1: In Sleepmode | |
| 518 #DEFINE tft_is_dimming flag1,5 ; =1: The TFT is dimming, ignore light sensor | |
| 519 #DEFINE display_velocity flag1,6 ; =1: show velocity | |
| 520 #DEFINE no_sensor_int flag1,7 ; =1: block any further access to pressure sensor | |
| 521 | |
| 522 #DEFINE rs232_recieve_overflow flag2,0 ; =1: An RS232 timeout overflow occoured | |
| 523 #DEFINE stored_gas_changed flag2,1 ; =1: Stored Gas changed | |
| 524 #DEFINE high_altitude_mode flag2,2 ; =1: Unit was manually turned on with ambient pressure <880mbar | |
| 525 #DEFINE FLAG_apnoe_mode flag2,3 ; =1: Apnoe mode selected | |
| 526 #DEFINE restore_deco_data flag2,4 ; =1: Restore deco data (After simulation) | |
| 527 #DEFINE premenu flag2,5 ; =1: Premenu/Divemenu selected | |
| 528 #DEFINE menubit flag2,6 ; menu | |
| 529 #DEFINE simulatormode_active flag2,7 ; =1: Simulator mode active, override pressure sensor readings | |
| 530 | |
| 531 #DEFINE divemode_menu flag3,0 ; =1: Divemode menu is shown | |
| 532 #DEFINE onesecupdate flag3,1 ; =1 after any second | |
| 533 #DEFINE twosecupdate flag3,2 ; =1: New two-second update | |
| 534 #DEFINE toggle_customview flag3,3 ; =1: Next customview | |
| 535 #DEFINE oneminupdate flag3,4 ; =1 after any minute | |
| 536 #DEFINE divemode flag3,5 ; =1: in Divemode | |
| 537 #DEFINE battery_is_36v flag3,6 ; =1: 3,6V Battery is in use | |
| 538 #DEFINE warning_active flag3,7 ; =1: A warning is active in divemode or surfacemode | |
| 539 | |
| 540 #DEFINE better_gas_available flag4,0 ; =1: A better gas is available | |
| 541 #DEFINE blinking_better_gas flag4,1 ; =1: Gas is blinking | |
| 542 #DEFINE menuview flag4,2 ; =1: A menuview is shown in divemode (e.g. "Menu?") | |
| 543 #DEFINE quarter_second_update flag4,3 ; =1: A new 1/4 second has begun | |
| 544 #DEFINE divemode_gaschange flag4,4 ; =1: The gas will change very soon | |
| 545 #DEFINE decostop_active flag4,5 ; =1: Decompression stop shown | |
| 546 #DEFINE depth_greater_100m flag4,6 ; =1: Current Depth > 100m | |
| 547 #DEFINE realdive flag4,7 ; =1: A real dive during divemode | |
| 548 | |
| 549 #DEFINE dive_warning_displayed flag5,0 ; =1: The warning sign is shown | |
| 550 #DEFINE reset_average_depth flag5,1 ; =1: Reset the average depth | |
| 551 #DEFINE store_sample flag5,2 ; =1: Store a new sample | |
| 552 #DEFINE divemode2 flag5,3 ; =1: Dive longer then one minute | |
| 553 #DEFINE FLAG_active_descent flag5,4 ; Used in Apnoe mode | |
| 554 #DEFINE event_occured flag5,5 ; =1: An event occured, store it! | |
| 555 #DEFINE divemode_menu_active flag5,6 ; =1: The divemode menu is shown | |
| 556 #DEFINE temp_changed flag5,7 ; =1: The temperature changed | |
| 557 | |
| 558 #DEFINE gas6_changed flag6,0 ; =1: Gas 6 has been selected/changed underwater | |
| 559 #DEFINE onehourupdate flag6,1 ; =1: A new hour has just begun | |
| 560 #DEFINE settime_setdate flag6,2 ; =1: In the Set Time or Set Date Menu | |
| 561 #DEFINE setpoint_changed flag6,3 ; =1: Setpoint has been changed | |
| 562 #DEFINE second_row_warning flag6,4 ; =1: The second row contains a warning | |
| 563 #DEFINE FLAG_ccr_mode flag6,5 ; =1: CCR mode (Fixed ppO2 or Sensor) active | |
| 564 #DEFINE dive_hud1_displayed flag6,6 ; =1: The Sensor1 HUD reading is displayed | |
| 565 #DEFINE dive_hud2_displayed flag6,7 ; =1: The Sensor2 HUD reading is displayed | |
| 566 | |
| 567 #DEFINE dive_hud3_displayed flag7,0 ; =1: The Sensor3 HUD reading is displayed | |
| 568 #DEFINE no_more_divesecs flag7,1 ; =1: Do no longer show seconds in divemode | |
| 569 #DEFINE FLAG_gauge_mode flag7,2 ; =1: In Gauge mode | |
| 570 #DEFINE ignore_last_edited_gas flag7,3 ; Used in gaslist_cleanup_list | |
| 571 #DEFINE ccr_diluent_setup flag7,4 ; =1: Setting up Diluents ("Gas6-10") | |
| 572 #DEFINE menu_show_sensors flag7,5 ; =1: Update HUD data in menu | |
| 573 #DEFINE short_gas_decriptions flag7,6 ; =1: Use short versions of gaslist_strcat_gas_mod and gaslist_strcat_setpoint | |
| 11 | 574 #DEFINE max_depth_greater_100m flag7,7 ; =1: Max. Depth > 100m |
| 0 | 575 |
| 576 #DEFINE is_bailout flag8,0 ; =1: Bailout | |
| 577 #DEFINE is_bailout_menu flag8,1 ; =1: Bailout | |
| 578 #DEFINE toggle_gf flag8,2 ; =1: Toggle GF/aGF | |
| 579 #DEFINE use_agf flag8,3 ; =1: Use aGF (instead of GF) | |
| 580 #DEFINE battery_removed_in_usb flag8,4 ; =1: The battery has been removed in USB | |
| 581 #DEFINE adc_running flag8,5 ; =1: The ADC is in use | |
| 582 #DEFINE comm_service_enabled flag8,6 ; =1: COMM Service mode unlocked | |
| 583 #DEFINE compass_enabled flag8,7 ; =1: The compass and accelerometer chip is active | |
| 584 | |
|
16
7b06f20881be
calm compass reading for minor heading changes
heinrichsweikamp
parents:
15
diff
changeset
|
585 #DEFINE compass_fast_mode flag9,0 ; =1: The compass is in fast mode |
|
7b06f20881be
calm compass reading for minor heading changes
heinrichsweikamp
parents:
15
diff
changeset
|
586 |
| 0 | 587 ;============================================================================= |
| 588 ; C-code Routines | |
| 589 ; PART 2 | |
| 590 extern deco_calc_CNS_decrease_15min | |
| 591 extern deco_calc_CNS_fraction | |
| 592 extern deco_calc_desaturation_time | |
| 593 extern deco_calc_hauptroutine | |
| 594 extern deco_calc_tissue | |
| 595 extern deco_calc_percentage | |
| 596 extern deco_calc_wo_deco_step_1_min | |
| 597 extern deco_calc_dive_interval | |
| 598 extern deco_clear_CNS_fraction | |
| 599 extern deco_clear_tissue | |
| 600 extern deco_pull_tissues_from_vault | |
| 601 extern deco_push_tissues_to_vault | |
| 602 |