Mercurial > public > hwos_code
annotate src/ms5541.asm @ 653:8bcd138ab744
add tools/o3pack.bat and the required tools/libs
author | heinrichsweikamp |
---|---|
date | Fri, 11 Aug 2023 15:53:49 +0200 |
parents | ef2ed7e3a895 |
children | 75e90cd0c2c3 |
rev | line source |
---|---|
0 | 1 ;============================================================================= |
2 ; | |
634 | 3 ; File ms5541.asm * combined next generation V3.9.4f |
0 | 4 ; |
634 | 5 ; Sensor Subroutines |
0 | 6 ; |
7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
8 ;============================================================================= | |
9 ; HISTORY | |
10 ; 2011-08-03 : [mH] moving from OSTC code | |
11 | |
623 | 12 #include "hwos.inc" ; Mandatory header |
13 #include "math.inc" ; Math routines | |
643 | 14 #include "i2c.inc" |
15 #include "shared_definitions.h" ; mailbox from/to p2_deco.c | |
623 | 16 |
17 ms5541 CODE | |
0 | 18 |
634 | 19 |
623 | 20 ; Expose internal variables to ease debug |
604 | 21 global D1, D2 |
22 global C1, C2, C3, C4, C5, C6 | |
623 | 23 global xdT, xdT2, OFF, SENS, pressure_abs_avg, temperature_avg |
0 | 24 |
623 | 25 |
634 | 26 ;----------------------------------------------------------------------------- |
27 ; Convert Temperature & Pressure raw Values to compensated Values | |
28 ; | |
29 ; called from ISR and from sleep mode, returns in bank isr_data | |
30 ; | |
31 global calculate_compensation | |
0 | 32 calculate_compensation: |
623 | 33 banksel isr_backup ; select bank ISR data |
34 | |
643 | 35 btfsc press_sensor_type ; New sensor found? |
36 bra press_comp_ms5837 ; Yes, use MS5837 | |
37 | |
623 | 38 ;---- pressure sensor compensation |
39 | |
40 ; xdT = D2 - C5 (s16 range -11.400 .. +12.350) | |
41 movf C5+0,W ; get value to be subtracted | |
42 subwf D2+0,W ; do the low byte | |
604 | 43 movwf xdT+0 |
623 | 44 movf C5+1,W ; do the high byte |
604 | 45 subwfb D2+1,W |
46 movwf xdT+1 | |
0 | 47 |
623 | 48 ; second order temperature calculation |
49 | |
50 ; xdT/128 is in range -89..+96, hence signed 8 bit. dT/128 = (2*dT)/256 | |
51 rlcf xdT+0,W ; put hit bit in carry | |
52 rlcf xdT+1,W ; inject in high byte | |
53 movwf isr_xA+0 ; and put result in low byte | |
604 | 54 clrf isr_xA+1 |
623 | 55 btfsc xdT+1,7 ; dT < 0 ? |
56 setf isr_xA+1 ; YES - sign extend to -1 | |
57 MOVII isr_xA,isr_xB ; copy A to B | |
604 | 58 call isr_signed_mult16x16 ; dT*dT --> xC (32 bits) |
0 | 59 |
623 | 60 ; dT >= 0: divide by 8, i.e. 3 shifts rights |
61 ; dT < 0: divide by 2, i.e. 1 shifts rights | |
634 | 62 movlw .3 ; 3 shifts by default |
63 btfss xdT+1,7 ; was dT negative ? | |
64 movlw .1 ; YES - replace by 1 shift | |
0 | 65 calc_loop_1: |
634 | 66 bcf STATUS,C ; dT^2 is positive, so injecte zeros |
67 rrcf isr_xC+1,F ; shift right high byte | |
68 rrcf isr_xC+0,F ; shift right low byte | |
69 decfsz WREG ; decrement loop counter, all shifts done? | |
70 bra calc_loop_1 ; NO - loop | |
0 | 71 |
604 | 72 movf isr_xC+0,W ; dT2 = dT - (dT/128)*(dT/128)/(2 ...or... 8) |
634 | 73 subwf xdT+0,W ; ... |
74 movwf xdT2+0 ; ... | |
75 movf isr_xC+1,W ; ... | |
76 subwfb xdT+1,W ; ... | |
77 movwf xdT2+1 ; ... | |
604 | 78 |
623 | 79 ; calculate OFF = C2 + ((C4-250)*dT2)/2^12 + 10000 (range +9.246 .. +18.887) |
80 MOVII C4, isr_xA ; C4 - 250 --> A | |
81 MOVII xdT2,isr_xB ; dT2 --> B | |
634 | 82 call isr_signed_mult16x16 ; C = A*B |
0 | 83 |
623 | 84 movlw .12-.8 ; a 12 bit shift = 1 byte + 4 bits |
634 | 85 call isr_shift_C31 ; special shift |
368
57e349960ef4
Additional temperature calibration via PC interface
heinrichsweikamp
parents:
353
diff
changeset
|
86 |
623 | 87 movlw LOW(.10000) ; add 10000 |
634 | 88 addwf isr_xC+1,F ; ... |
89 movlw HIGH(.10000) ; ... | |
90 addwfc isr_xC+2,F ; ... | |
0 | 91 |
623 | 92 movf C2+0,W ; add C2 and store result in OFF |
634 | 93 addwf isr_xC+1,W ; ... |
94 movwf OFF+0 ; ... | |
95 movf C2+1,W ; ... | |
96 addwfc isr_xC+2,W ; ... | |
97 movwf OFF+1 ; ... | |
604 | 98 |
623 | 99 ; calculate SENS = C1/2 + ((C3+200)*dT)/2^13 + 3000 |
604 | 100 movlw LOW(.200) ; C3+200 --> A |
634 | 101 addwf C3+0,W ; ... |
102 movwf isr_xA+0 ; ... | |
103 movlw HIGH(.200) ; ... | |
104 addwfc C3+1,W ; ... | |
105 movwf isr_xA+1 ; ... | |
604 | 106 ; B still contains dT2 |
634 | 107 call isr_signed_mult16x16 ; C = A*B |
623 | 108 movlw .13-.8 ; A 13 bit shift = 1 byte + 5 bits |
634 | 109 call isr_shift_C31 ; special shift |
0 | 110 |
604 | 111 bcf STATUS,C ; SENS = C1 / 2 |
634 | 112 rrcf C1+1,W ; ... |
113 movwf SENS+1 ; ... | |
114 rrcf C1+0,W ; ... | |
115 movwf SENS+0 ; ... | |
604 | 116 |
623 | 117 movlw LOW(.3000) ; add 3000 |
634 | 118 addwf isr_xC+1,F ; ... |
119 movlw HIGH(.3000) ; ... | |
120 addwfc isr_xC+2,F ; ... | |
0 | 121 |
623 | 122 movf isr_xC+1,W ; and sum into SENS |
634 | 123 addwf SENS+0,F ; ... |
124 movf isr_xC+2,W ; ... | |
125 addwfc SENS+1,F ; ... | |
0 | 126 |
631 | 127 ; calculate absolute pressure = (sens * (d1-off))/2^12 + 1000 (for MS5541C) |
128 ; calculate absolute pressure = (sens * (d1-off))/2^11 + 1000 (for MS5541C-30) | |
604 | 129 movf OFF+0,W ; d1-off --> a |
634 | 130 subwf D1+0,W ; ... |
131 movwf isr_xA+0 ; ... | |
132 movf OFF+1,W ; ... | |
133 subwfb D1+1,W ; ... | |
134 movwf isr_xA+1 ; ... | |
0 | 135 |
634 | 136 MOVII SENS,isr_xB ; sens --> B |
137 call isr_signed_mult16x16 ; C = A*B | |
643 | 138 movlw .15 ; 15 * 256 = 3840 |
631 | 139 cpfslt C1+1 ; C1 > 3328 ? |
140 bra isr_shift_ms5541_30 ; YES - MS5541-30 | |
141 movlw .12-.8 ; NO - MS5541: 12 bit shift = 1 byte + 4 bits | |
634 | 142 bra isr_shift_ms5541_common ; - continue |
631 | 143 isr_shift_ms5541_30: |
144 movlw .11-.8 ; MS5541-30: 11 bit shift = 1 byte + 3 bits | |
145 isr_shift_ms5541_common: | |
634 | 146 call isr_shift_C31 ; special shift |
623 | 147 movlw LOW .1000 ; add 1000 |
634 | 148 addwf isr_xC+1,F ; ... |
149 movlw HIGH .1000 ; ... | |
150 addwfc isr_xC+2,F ; ... | |
643 | 151 bra press_comp_done_common |
0 | 152 |
643 | 153 press_comp_ms5837: |
154 ; xdT = D2 - C5*2^8 | |
155 movlw .0 ; Low | |
156 subwf D2+0,W | |
157 movwf xdT+0 | |
158 movf C5+0,W ; High | |
159 subwfb D2+1,W | |
160 movwf xdT+1 | |
161 movf C5+1,W ; Upper | |
162 subwfb D2+2,W | |
163 movwf xdT+2 | |
164 ; xdT equals D2 - (C5*2^8) | |
165 | |
166 ; Calculate OFF = C2*2^16+(C4*xdT)/2^7 | |
167 movff C4+0,isr_xA+0 | |
168 movff C4+1,isr_xA+1 | |
169 clrf isr_xA+2 | |
170 movff xdT+0,isr_xB+0 | |
171 movff xdT+1,isr_xB+1 | |
172 movff xdT+2,isr_xB+2 | |
173 call isr_signed_mult24x24 ; C = A*B | |
174 ; isr_xC:6 equals (C4*xdT) | |
175 rlcf isr_xC+0,F | |
176 rlcf isr_xC+1,F | |
177 rlcf isr_xC+2,F | |
178 rlcf isr_xC+3,F | |
179 rlcf isr_xC+4,F | |
180 rlcf isr_xC+5,F | |
181 movff isr_xC+1,OFF+0 | |
182 movff isr_xC+2,OFF+1 | |
183 movff isr_xC+3,OFF+2 | |
184 movff isr_xC+4,OFF+3 | |
185 ; OFF equals (C4*xdT)/2^7 | |
186 movf C2+0,W | |
187 addwf OFF+2,F | |
188 movf C2+1,W | |
189 addwfc OFF+3,F | |
190 ; OFF equals C2*2^16+((C4*xdT)/2^7) | |
191 | |
192 ; Calculate SENS = C1*2^15 + (C3*xdT)/2^8 | |
193 MOVII C1,isr_xA | |
194 movlw LOW (.32768) | |
195 movwf isr_xB+0 | |
196 movlw HIGH (.32768) | |
197 movwf isr_xB+1 | |
198 call isr_unsigned_mult16x16 ; C = A*B | |
199 movff isr_xC+0,SENS+0 | |
200 movff isr_xC+1,SENS+1 | |
201 movff isr_xC+2,SENS+2 | |
202 movff isr_xC+3,SENS+3 ; 32bit copy | |
203 ; SENS equals C1*2^15 | |
204 movff C3+0,isr_xA+0 | |
205 movff C3+1,isr_xA+1 | |
206 clrf isr_xA+2 | |
207 movff xdT+0,isr_xB+0 | |
208 movff xdT+1,isr_xB+1 | |
209 movff xdT+2,isr_xB+2 | |
210 call isr_signed_mult24x24 ; C = A*B | |
211 ; isr_xC:6 equals (C3*xdT) | |
212 movf isr_xC+1,W | |
213 addwf SENS+0,F | |
214 movf isr_xC+2,W | |
215 addwfc SENS+1,F | |
216 movf isr_xC+3,W | |
217 addwfc SENS+2,F | |
218 movf isr_xC+4,W | |
219 addwfc SENS+3,F | |
220 ; SENS equals C1*2^15 + (C3*xdT)/2^8 | |
221 | |
222 ; Calculate PRESSURE = ((D1 * SENS) / 2^21) - OFF) / 2^13 | |
223 movff SENS+0,isr_xA+0 | |
224 movff SENS+1,isr_xA+1 | |
225 movff SENS+2,isr_xA+2 | |
226 movff SENS+3,isr_xA+3 | |
227 movff D1+0,isr_xB+0 | |
228 movff D1+1,isr_xB+1 | |
229 movff D1+2,isr_xB+2 | |
230 call isr_unsigned_mult32x24 ; C = A*B | |
231 ; isr_xC:7 equals D1*SENS | |
232 | |
233 ; devide isr_xC:7 / 2^21 -> shift right 21 times | |
234 movlw .21 | |
235 press_comp_ms5837_2: | |
236 bcf STATUS,C ; clear carry, needed for MS5837 use | |
237 rrcf isr_xC+6,F | |
238 rrcf isr_xC+5,F | |
239 rrcf isr_xC+4,F | |
240 rrcf isr_xC+3,F | |
241 rrcf isr_xC+2,F | |
242 rrcf isr_xC+1,F | |
243 rrcf isr_xC+0,F | |
244 decfsz WREG ; decrement loop counter, done? | |
245 bra press_comp_ms5837_2 ; NO - loop | |
246 ; isr_xC:6 equals (D1*SENS)/2^21 | |
247 | |
248 ; Calculate isr_xC:6-OFF | |
249 movf OFF+0,W ; Low | |
250 subwf isr_xC+0,F | |
251 movf OFF+1,W ; High | |
252 subwfb isr_xC+1,F | |
253 movf OFF+2,W ; Upper | |
254 subwfb isr_xC+2,F | |
255 movf OFF+3,W ; Extra | |
256 subwfb isr_xC+3,F | |
257 movlw .0 ; ultra | |
258 subwfb isr_xC+4,F | |
259 movlw .0 ; Hyper | |
260 subwfb isr_xC+5,F | |
261 ; isr_xC:5 is now isr_xC:4-OFF | |
262 | |
263 ; devide by 2^13 | |
264 ; devide isr_xC:6 / 2^13 -> shift right 13 times | |
265 movlw .13 | |
266 press_comp_ms5837_3: | |
267 bcf STATUS,C ; clear carry | |
268 rrcf isr_xC+5,F | |
269 rrcf isr_xC+4,F | |
270 rrcf isr_xC+3,F | |
271 rrcf isr_xC+2,F | |
272 rrcf isr_xC+1,F | |
273 rrcf isr_xC+0,F | |
274 decfsz WREG ; decrement loop counter, done? | |
275 bra press_comp_ms5837_3 ; NO - loop | |
276 ; isr_xC:4 equals pressure in .1 mbar | |
277 | |
278 movlw .10 | |
279 movwf isr_xB+0 | |
280 clrf isr_xB+1 | |
281 call isr_div32x16 ; isr_xC:4 = isr_xC:4 / isr_xB:2 with isr_xA as remainder | |
282 ; isr_xC:2 equals pressure in 1mbar | |
283 | |
284 ; copy for compatibility of the next routines | |
285 movff isr_xC+1,isr_xC+2 | |
286 movff isr_xC+0,isr_xC+1 | |
287 | |
288 press_comp_done_common: ; continue here even with MS5837 | |
623 | 289 ; add opt_pressure_adjust to result (SIGNED!) |
634 | 290 clrf isr_xC+0 ; prepare high byte for adjustment |
291 movff opt_pressure_adjust,WREG ; get low byte for adjustment (signed) | |
292 movf WREG,W ; excite flags | |
293 bz calc_compensation_1 ; opt_pressure_adjust = 0 -> skip adjustment | |
294 btfss STATUS,N ; opt_pressure_adjust < 0 ? | |
295 bra calc_compensation_adjust ; NO - positive | |
296 negf WREG ; YES - negate opt_pressure_adjust for limit check | |
297 setf isr_xC+0 ; - adopt high byte for adjustment | |
298 calc_compensation_adjust: | |
299 addlw -.21 ; limit is 20 mbar, subtract 21 | |
300 bnn calc_compensation_1 ; result not negative -> skip adjustment | |
301 movff opt_pressure_adjust,WREG ; get opt_pressure_adjust, low byte | |
623 | 302 addwf isr_xC+1,F ; pressure value += opt_pressure_adjust, low byte |
634 | 303 movf isr_xC+0,W ; get adjustment, high byte |
304 addwfc isr_xC+2,F ; pressure value += opt_pressure_adjust, high byte | |
623 | 305 |
306 calc_compensation_1: | |
307 bcf sensor_override_active ; clear sensor override active flag by default | |
308 btfss sensor_override_request ; sensor override requested? | |
309 bra calc_compensation_add_avg ; NO - keep taking absolute pressure from sensor | |
310 btfsc quit_simulatormode ; YES - shall quit simulator mode (the fast way)? | |
311 bra calc_compensation_sim_quit ; YES - force pressure_rel_sim to zero | |
312 ;bra calc_compensation_sim ; NO - calculate pressure_rel_sim from simulated depth | |
313 | |
314 calc_compensation_sim: ; check if OSTC got submerged | |
315 movlw .5 ; coding in high byte for 1280 | |
316 cpfsgt isr_xC+2 ; absolute pressure > 1280 mbar, i.e. OSTC submerged? | |
317 bra calc_compensation_sim_slave ; NO - slave pressure_rel_sim to target depth | |
318 ;bra calc_compensation_sim_quit ; YES - force pressure_rel_sim to zero | |
92
7ca1105751c7
add sensor calibration option (PC only), some cleanup
heinrichsweikamp
parents:
29
diff
changeset
|
319 |
623 | 320 calc_compensation_sim_quit: |
321 CLRI pressure_rel_sim ; set pressure_rel_sim to zero, this paves a restart into surface/dive mode | |
322 bra calc_compensation_sim_com ; continue with common part | |
323 | |
324 calc_compensation_sim_slave: | |
325 movf simulatormode_depth,W ; copy simulated depth to WREG | |
326 mullw .100 ; multiply with 100 to turn depth from meters to relative target pressure in mbar | |
327 ; check if shall go up | |
328 movf pressure_rel_sim+0,W ; get relative pressure, low byte | |
329 subwf PRODL,W ; WREG = relative target pressure - pressure_rel_sim (low byte) | |
330 movf pressure_rel_sim+1,W ; get relative pressure, high byte | |
331 subwfb PRODH,W ; WREG = relative target pressure - pressure_rel_sim (high byte) | |
332 btfsc STATUS,N ; result < 0, i.e. pressure_rel_sim > relative target pressure ? | |
333 bra calc_compensation_sim_up ; YES - decrease pressure_rel_sim | |
334 ; check if shall go down | |
335 movf PRODL,W ; get relative target pressure, low byte | |
336 subwf pressure_rel_sim+0,W ; WREG = pressure_rel_sim - relative target pressure (low byte) | |
337 movf PRODH,W ; get relative target pressure, high byte | |
338 subwfb pressure_rel_sim+1,W ; WREG = pressure_rel_sim - relative target pressure (high byte) | |
339 btfsc STATUS,N ; result < 0, i.e. relative target pressure > pressure_rel_sim ? | |
340 bra calc_compensation_sim_down ; YES - increase pressure_rel_sim | |
341 ; both pressures are equal | |
342 bra calc_compensation_sim_com ; NO to both - keep pressure_rel_sim as it is | |
0 | 343 |
623 | 344 calc_compensation_sim_up: |
345 movf PRODL,W ; get relative target pressure, low byte | |
346 subwf pressure_rel_sim+0,W ; WREG = pressure_rel_sim - relative target pressure (low byte) | |
347 movwf PRODL ; PRODL = pressure_rel_sim - relative target pressure (low byte) | |
348 movf PRODH,W ; get relative target pressure, high byte | |
349 subwfb pressure_rel_sim+1,W ; WREG = pressure_rel_sim - relative target pressure (high byte) | |
350 tstfsz WREG ; more than 255 mbar off from target? | |
351 bra calc_compensation_sim_up_norm ; YES - go up with normal speed | |
352 movlw simulator_ascent_threshold ; NO - get remaining difference for slowing down ascent | |
353 cpfslt PRODL ; - remaining difference to target < decrement? | |
354 bra calc_compensation_sim_up_norm ; NO - go up with normal speed | |
355 ;bra calc_compensation_sim_up_slow ; YES - go up with slow speed | |
356 | |
357 calc_compensation_sim_up_slow: | |
358 DECI pressure_rel_sim ; subtract slow decrement (1 mbar) from pressure_rel_sim | |
359 bra calc_compensation_sim_com ; continue with common part | |
360 | |
361 calc_compensation_sim_up_norm: | |
362 SUBLI simulator_ascent_rate,pressure_rel_sim ; subtract normal decrement from pressure_rel_sim | |
363 bra calc_compensation_sim_com ; continue with common part | |
353
573f2251cf49
NEW: Quit Simulator automatically when starting a real dive
heinrichsweikamp
parents:
275
diff
changeset
|
364 |
623 | 365 calc_compensation_sim_down: |
366 movf pressure_rel_sim+0,W ; get relative pressure, low byte | |
367 subwf PRODL,F ; PRODL = relative target pressure - pressure_rel_sim (low byte) | |
368 movf pressure_rel_sim+1,W ; get relative pressure, high byte | |
369 subwfb PRODH,W ; WREG = relative target pressure - pressure_rel_sim (high byte) | |
370 tstfsz WREG ; more than 255 mbar off from target? | |
371 bra calc_compensation_sim_down_norm ; YES - go down with normal speed | |
372 movlw simulator_descent_threshold ; NO - get remaining difference for slowing down descent | |
373 cpfslt PRODL ; - remaining difference to target < increment? | |
374 bra calc_compensation_sim_down_norm ; NO - go down with normal speed | |
375 ;bra calc_compensation_sim_down_slow ; YES - go down with slow speed | |
376 | |
377 calc_compensation_sim_down_slow: | |
378 INCI pressure_rel_sim ; add slow increment (1 mbar) to pressure_rel_sim | |
379 bra calc_compensation_sim_com ; continue with common part | |
604 | 380 |
623 | 381 calc_compensation_sim_down_norm: |
382 ADDLI simulator_descent_rate,pressure_rel_sim ; add normal increment to pressure_rel_sim | |
383 ;bra calc_compensation_sim_com ; continue with common part | |
384 | |
385 calc_compensation_sim_com: | |
386 movf pressure_surf+0,W ; copy surface pressure to WREG, low byte | |
387 addwf pressure_rel_sim+0,W ; add surface pressure to relative pressure to gain simulated absolute pressure, low byte | |
388 movwf isr_xC+1 ; override sensor pressure with simulated pressure, low byte | |
389 movf pressure_surf+1,W ; copy surface pressure to WREG, high byte | |
390 addwfc pressure_rel_sim+1,W ; add surface pressure to relative pressure to gain simulated absolute pressure, high byte | |
391 movwf isr_xC+2 ; override sensor pressure with simulated pressure, high byte | |
392 bsf sensor_override_active ; confirm sensor override is active | |
393 | |
394 calc_compensation_add_avg: | |
395 ; add current absolute pressure to averaging buffer | |
396 movf isr_xC+1,W ; copy current absolute pressure to WREG, low byte | |
397 addwf pressure_abs_avg+0,F ; pressure_abs_avg += current pressure, low byte | |
398 movf isr_xC+2,W ; copy current absolute pressure to WREG, high byte | |
399 addwfc pressure_abs_avg+1,F ; pressure_abs_avg += current pressure, high byte | |
643 | 400 movlw .0 |
401 addwfc pressure_abs_avg+2,F ; pressure_abs_avg += current pressure, upper byte | |
623 | 402 |
403 ;---- temperature sensor compensation | |
0 | 404 |
643 | 405 btfsc press_sensor_type ; New sensor found? |
406 bra temp_comp_ms5837 ; Yes, use MS5837 | |
407 | |
604 | 408 ; calculate temp = 200 + dT*(C6+100)/2^11 |
409 movlw LOW(.100) ; C6 + 100 --> A | |
634 | 410 addwf C6+0,W ; ... |
411 movwf isr_xA+0 ; ... | |
412 movlw HIGH(.100) ; ... | |
413 addwfc C6+1,W ; ... | |
414 movwf isr_xA+1 ; ... | |
0 | 415 |
623 | 416 MOVII xdT2,isr_xB ; dT2 --> B |
604 | 417 call isr_signed_mult16x16 ; A*B |
623 | 418 movlw .11-.8 ; a 12 bit shift = 1 byte + 3 bits |
634 | 419 call isr_shift_C31 ; special shift |
0 | 420 |
623 | 421 movlw LOW(.200) ; add 200 |
634 | 422 addwf isr_xC+1,F ; ... |
423 movlw HIGH(.200) ; ... | |
424 addwfc isr_xC+2,F ; ... | |
643 | 425 bra temp_comp_done_common |
0 | 426 |
643 | 427 temp_comp_ms5837: |
428 ; TEMP = 2000+((xdT * C6) / 2^23) | |
429 | |
430 ; xdT * C6 -> isr_xC:6 | |
431 movff C6+0,isr_xA+0 | |
432 movff C6+1,isr_xA+1 | |
433 clrf isr_xA+2 | |
434 movff xdT+0,isr_xB+0 | |
435 movff xdT+1,isr_xB+1 | |
436 movff xdT+2,isr_xB+2 | |
437 call isr_signed_mult24x24 ; A*B | |
438 | |
439 ; devide isr_xC:6 / 2^23 -> shift right 23 times | |
440 ; a special variant (again): We loose isr_xC+0 and isr_xC+1 anyway | |
441 ; and do not care about the inserted carry since we won't use isr_xC+5 | |
442 ; and we shift less then 8 bytes | |
443 movlw .23-.16 | |
444 temp_comp_ms5837_2: | |
445 rrcf isr_xC+5,F ; | |
446 rrcf isr_xC+4,F ; | |
447 rrcf isr_xC+3,F ; | |
448 rrcf isr_xC+2,F ; ... | |
449 decfsz WREG ; decrement loop counter, done? | |
450 bra temp_comp_ms5837_2 ; NO - loop | |
451 | |
452 ; only use +2 and +3 | |
453 movlw LOW(.2000) ; add 2000 | |
454 addwf isr_xC+2,F ; ... | |
455 movlw HIGH(.2000) ; ... | |
456 addwfc isr_xC+3,F ; ... | |
457 | |
458 ; devide by 10 for .1°C resolution | |
459 movlw .10 | |
460 movwf isr_xB+0 | |
461 clrf isr_xB+1 | |
462 movff isr_xC+2,isr_xA+0 | |
463 movff isr_xC+3,isr_xA+1 | |
464 | |
465 btfss isr_xC+3,7 ; check sign bit | |
466 bra temp_comp_ms5837_3 ; not negative... | |
467 ; negate isr_xA:2 to make it positive | |
468 comf isr_xA+1 ; 16 bit sign change | |
469 negf isr_xA+0 | |
470 btfsc STATUS,C ; - carry to propagate? | |
471 incf isr_xA+1,F ; YES - do it | |
472 | |
473 temp_comp_ms5837_3: | |
474 call isr_div16x16 ; isr_xC:2 = isr_xA:2 / isr_xB:2 | |
475 | |
476 btfss isr_xC+3,7 ; check sign bit again | |
477 bra temp_comp_ms5837_4 ; not negative... | |
478 ; negate result isr_xC:2 to make it negative again | |
479 comf isr_xC+1 ; 16 bit sign change | |
480 negf isr_xC+0 | |
481 btfsc STATUS,C ;- carry to propagate? | |
482 incf isr_xC+1,F ; YES - do it | |
483 | |
484 temp_comp_ms5837_4: | |
485 ; copy for compatibility of the next routines | |
486 movff isr_xC+1,isr_xC+2 | |
487 movff isr_xC+0,isr_xC+1 | |
488 | |
489 temp_comp_done_common: ; continue here even with MS5837 | |
623 | 490 ; add opt_temperature_adjust to result (SIGNED!) |
634 | 491 clrf isr_xC+0 ; prepare high byte for adjustment |
492 movff opt_temperature_adjust,WREG ; get low byte for adjustment (signed) | |
493 movf WREG,W ; excite flags | |
494 bz calc_temperature_add_avg ; opt_temperature_adjust = 0 -> skip adjustment | |
495 btfss STATUS,N ; opt_temperature_adjust < 0 ? | |
496 bra calc_temperature_adjust ; NO - positive | |
497 negf WREG ; YES - negate opt_temperature_adjust for limit check | |
498 setf isr_xC+0 ; - adopt high byte for adjustment | |
499 calc_temperature_adjust: | |
500 addlw -.21 ; limit is 2.0°C, subtract 21 (scaling is 0.1°C) | |
501 bnn calc_temperature_add_avg ; result not negative -> skip adjustment | |
502 movff opt_temperature_adjust,WREG ; get opt_temperature_adjust, low byte | |
503 addwf isr_xC+1,F ; temperature value += opt_temperature_adjust, low byte | |
504 movf isr_xC+0,W ; get adjustment high byte | |
505 addwfc isr_xC+2,F ; temperature value += opt_temperature_adjust, high byte | |
368
57e349960ef4
Additional temperature calibration via PC interface
heinrichsweikamp
parents:
353
diff
changeset
|
506 |
634 | 507 calc_temperature_add_avg: |
508 movf isr_xC+1,W ; copy current temperature to WREG, low byte | |
509 addwf temperature_avg+0,F ; temperature_avg += current temperature, low byte | |
510 movf isr_xC+2,W ; copy current temperature to WREG, high byte | |
511 addwfc temperature_avg+1,F ; temperature_avg += current temperature, high byte | |
512 return ; done | |
513 | |
623 | 514 |
634 | 515 ;----------------------------------------------------------------------------- |
516 ; Start Pressure Measurement | |
517 ; | |
518 ; called from ISR and sleep mode, needs to be called in bank isr_backup | |
519 ; | |
520 global get_pressure_start | |
521 get_pressure_start: | |
643 | 522 btfsc press_sensor_type ; New sensor found? |
523 return ; Yes, ignore routine | |
634 | 524 rcall reset_MS5541 ; reset the chip |
525 movlw b'10100000' ; +3*high as start and 1+low as stop | |
526 movwf dbuffer ; .... | |
527 movlw d'12' ; send start command | |
643 | 528 bra send_data_MS5541 ; ... (And return) |
0 | 529 |
623 | 530 |
634 | 531 ;----------------------------------------------------------------------------- |
532 ; Read Pressure Measurement Result | |
533 ; | |
534 ; called from ISR and sleep mode, needs to be called in bank isr_backup | |
535 ; | |
536 global get_pressure_value | |
0 | 537 get_pressure_value: |
643 | 538 btfsc press_sensor_type ; New sensor found? |
539 bra get_pressure_value2 | |
623 | 540 btfsc MS5541_miso ; conversion done? |
634 | 541 return ; NO - abort |
542 rcall get_2bytes_MS5541 ; YES - read result | |
543 movff dMSB,D1+1 ; copy result to D1, high byte first | |
544 movff dLSB,D1+0 ; ... low byte second | |
545 return ; done | |
0 | 546 |
643 | 547 get_pressure_value2: |
548 btfsc i2c_busy_pressure ; currently updating pressure? | |
549 return ; Yes, skip update... | |
550 movff D1_buffer+0,D1+0 | |
551 movff D1_buffer+1,D1+1 | |
552 movff D1_buffer+2,D1+2 | |
553 return | |
554 | |
623 | 555 |
634 | 556 ;----------------------------------------------------------------------------- |
557 ; Start Temperature Measurement | |
558 ; | |
559 ; called from ISR and sleep mode, needs to be called in bank isr_backup | |
560 ; | |
561 global get_temperature_start | |
562 get_temperature_start: | |
643 | 563 btfsc press_sensor_type ; New sensor found? |
564 return ; Yes, ignore routine | |
634 | 565 rcall reset_MS5541 ; reset chip |
566 movlw b'10010000' ; +3*high as start and 1+low as stop | |
567 movwf dbuffer ; ... | |
568 movlw d'12' ; send start command | |
643 | 569 bra send_data_MS5541 ; ... (And return) |
634 | 570 |
571 | |
572 ;----------------------------------------------------------------------------- | |
573 ; Read Pressure Measurement Result | |
574 ; | |
575 ; called from ISR and sleep mode, needs to be called in bank isr_backup | |
576 ; | |
577 global get_temperature_value | |
0 | 578 get_temperature_value: |
643 | 579 btfsc press_sensor_type ; New sensor found? |
580 bra get_temperature_value2 | |
623 | 581 btfsc MS5541_miso ; conversion done? |
582 return ; NO - done | |
634 | 583 rcall get_2bytes_MS5541 ; YES - read result |
584 movff dMSB,D2+1 ; copy result to D2, high byte first | |
585 movff dLSB,D2+0 ; ... low byte second | |
586 return ; done | |
587 | |
643 | 588 get_temperature_value2: |
589 btfsc i2c_busy_temperature ; currently updating temperature? | |
590 return ; Yes, skip update... | |
591 movff D2_buffer+0,D2+0 | |
592 movff D2_buffer+1,D2+1 | |
593 movff D2_buffer+2,D2+2 | |
594 return | |
595 | |
0 | 596 |
634 | 597 ;----------------------------------------------------------------------------- |
598 ; Retrieve Calibration Data | |
599 ; | |
600 ; called by start, returns in bank common | |
601 ; | |
602 global get_calibration_data | |
0 | 603 get_calibration_data: |
623 | 604 banksel isr_backup ; select bank ISR data |
643 | 605 bsf block_sensor_interrupt ; disable sensor interrupts |
0 | 606 |
643 | 607 btfsc press_sensor_type ; New sensor found? |
608 call I2C_get_calib_MS5837 ; Yes, read C1 to C6 | |
609 banksel isr_backup ; select bank ISR data | |
645 | 610 ; double-check sensor type |
611 movlw 0xED | |
612 cpfseq C1+0 | |
613 bra get_calibration_data1 ; Not 0xED (I2C address false reading) | |
614 movlw 0xED | |
615 cpfseq C1+1 | |
616 bra get_calibration_data1 ; Not 0xED (I2C address false reading) | |
617 movlw 0xED | |
618 cpfseq C5+0 | |
619 bra get_calibration_data1 ; Not 0xED (I2C address false reading) | |
620 movlw 0xED | |
621 cpfseq C5+1 | |
622 bra get_calibration_data1 ; Not 0xED (I2C address false reading) | |
643 | 623 |
645 | 624 ; C1 and C5 are 0xEDED -> NOT Sensor 1 |
625 bcf press_sensor_type | |
626 | |
627 get_calibration_data1: | |
643 | 628 btfsc press_sensor_type ; New sensor found? |
629 bra get_calibration_data2 ; Yes, skip to the end | |
630 | |
634 | 631 rcall reset_MS5541 ; reset chip |
632 | |
623 | 633 movlw b'01010100' ; +3*high as start and 1+low as stop |
634 | 634 movwf dbuffer ; ... |
635 movlw d'13' ; send command | |
636 rcall send_data_MS5541 ; ... | |
637 rcall get_2bytes_MS5541 ; read result | |
638 movff dMSB,ir_s8_buffer+1 ; copy result, high byte first | |
639 movff dLSB,ir_s8_buffer+0 ; copy result, low byte second | |
0 | 640 |
623 | 641 movlw b'01011000' ; +3*high as start and 1+low as stop |
634 | 642 movwf dbuffer ; ... |
643 movlw d'13' ; send command | |
644 rcall send_data_MS5541 ; ... | |
645 rcall get_2bytes_MS5541 ; read result | |
646 movff dMSB,ir_s8_buffer+3 ; copy result, high byte first | |
647 movff dLSB,ir_s8_buffer+2 ; copy result, low byte second | |
0 | 648 |
623 | 649 movlw b'01100100' ; +3*high as start and 1+low as stop |
634 | 650 movwf dbuffer ; ... |
651 movlw d'13' ; send command | |
652 rcall send_data_MS5541 ; ... | |
653 rcall get_2bytes_MS5541 ; read result | |
654 movff dMSB,ir_s8_buffer+5 ; copy result, high byte first | |
655 movff dLSB,ir_s8_buffer+4 ; copy result, low byte second | |
0 | 656 |
623 | 657 movlw b'01101000' ; +3*high as start and 1+low as stop |
634 | 658 movwf dbuffer ; ... |
659 movlw d'13' ; send command | |
660 rcall send_data_MS5541 ; ... | |
661 rcall get_2bytes_MS5541 ; read result | |
662 movff dMSB,ir_s8_buffer+7 ; copy result, high byte first | |
663 movff dLSB,ir_s8_buffer+6 ; copy result, low byte second | |
0 | 664 |
634 | 665 ; calculate C1 (16 Bit) |
666 movff ir_s8_buffer+1,C1+1 | |
0 | 667 bcf STATUS,C |
668 rrcf C1+1 | |
669 bcf STATUS,C | |
670 rrcf C1+1 | |
671 bcf STATUS,C | |
672 rrcf C1+1 | |
634 | 673 movff ir_s8_buffer+0,C1+0 |
0 | 674 bsf STATUS,C |
255 | 675 btfss ir_s8_buffer+1,0 |
0 | 676 bcf STATUS,C |
677 rrcf C1+0 | |
678 bsf STATUS,C | |
255 | 679 btfss ir_s8_buffer+1,1 |
0 | 680 bcf STATUS,C |
681 rrcf C1+0 | |
682 bsf STATUS,C | |
255 | 683 btfss ir_s8_buffer+1,2 |
0 | 684 bcf STATUS,C |
685 rrcf C1+0 | |
686 | |
634 | 687 ; calculate C2 (16 Bit) |
255 | 688 movff ir_s8_buffer+2, C2+0 |
0 | 689 bsf STATUS,C |
255 | 690 btfss ir_s8_buffer+3,0 |
0 | 691 bcf STATUS,C |
692 rrcf C2+0 | |
693 bsf STATUS,C | |
255 | 694 btfss ir_s8_buffer+3,1 |
0 | 695 bcf STATUS,C |
696 rrcf C2+0 | |
697 bsf STATUS,C | |
255 | 698 btfss ir_s8_buffer+3,2 |
0 | 699 bcf STATUS,C |
700 rrcf C2+0 | |
701 bsf STATUS,C | |
255 | 702 btfss ir_s8_buffer+3,3 |
0 | 703 bcf STATUS,C |
704 rrcf C2+0 | |
705 bsf STATUS,C | |
255 | 706 btfss ir_s8_buffer+3,4 |
0 | 707 bcf STATUS,C |
708 rrcf C2+0 | |
709 bsf STATUS,C | |
255 | 710 btfss ir_s8_buffer+3,5 |
0 | 711 bcf STATUS,C |
712 rrcf C2+0 | |
713 | |
255 | 714 movff ir_s8_buffer+3, C2+1 |
0 | 715 bsf STATUS,C |
255 | 716 btfss ir_s8_buffer+0,0 |
0 | 717 bcf STATUS,C |
718 rrcf C2+1 | |
719 bsf STATUS,C | |
255 | 720 btfss ir_s8_buffer+0,1 |
0 | 721 bcf STATUS,C |
722 rrcf C2+1 | |
723 bsf STATUS,C | |
255 | 724 btfss ir_s8_buffer+0,2 |
0 | 725 bcf STATUS,C |
726 rrcf C2+1 | |
727 bcf STATUS,C | |
728 rrcf C2+1 | |
729 bcf STATUS,C | |
730 rrcf C2+1 | |
731 bcf STATUS,C | |
732 rrcf C2+1 | |
733 | |
634 | 734 ; calculate C3 (16 Bit) |
255 | 735 movff ir_s8_buffer+5,C3+0 |
0 | 736 bsf STATUS,C |
255 | 737 btfss ir_s8_buffer+4,7 |
0 | 738 bcf STATUS,C |
739 rlcf C3+0 | |
740 bsf STATUS,C | |
255 | 741 btfss ir_s8_buffer+4,6 |
0 | 742 bcf STATUS,C |
743 rlcf C3+0 | |
744 clrf C3+1 | |
255 | 745 btfsc ir_s8_buffer+5,7 |
0 | 746 bsf C3+1,1 |
255 | 747 btfsc ir_s8_buffer+5,6 |
0 | 748 bsf C3+1,0 |
604 | 749 |
634 | 750 ; calculate C4 (16 Bit) |
255 | 751 movff ir_s8_buffer+7,C4+0 |
0 | 752 bsf STATUS,C |
255 | 753 btfss ir_s8_buffer+6,7 |
0 | 754 bcf STATUS,C |
755 rlcf C4+0 | |
756 clrf C4+1 | |
255 | 757 btfsc ir_s8_buffer+7,7 |
0 | 758 bsf C4+1,0 |
759 | |
623 | 760 ; C4=C4-250 |
604 | 761 movlw LOW(-.250) ; C4 - 250 --> C4 |
0 | 762 addwf C4+0,W |
604 | 763 movwf C4+0 |
764 movlw -1 ; HIGH(- .250) is not understood... | |
765 addwfc C4+1,W | |
766 movwf C4+1 | |
767 | |
634 | 768 ; calculate C5 (16 Bit) |
255 | 769 movff ir_s8_buffer+4,C5+0 |
0 | 770 bcf C5+0,6 |
255 | 771 btfsc ir_s8_buffer+2,0 |
0 | 772 bsf C5+0,6 |
773 bcf C5+0,7 | |
255 | 774 btfsc ir_s8_buffer+2,1 |
0 | 775 bsf C5+0,7 |
776 clrf C5+1 | |
255 | 777 btfsc ir_s8_buffer+2,2 |
0 | 778 bsf C5+1,0 |
255 | 779 btfsc ir_s8_buffer+2,3 |
0 | 780 bsf C5+1,1 |
255 | 781 btfsc ir_s8_buffer+2,4 |
0 | 782 bsf C5+1,2 |
255 | 783 btfsc ir_s8_buffer+2,5 |
0 | 784 bsf C5+1,3 |
785 | |
604 | 786 ; calculate C5 = UT1 |
787 ; C5 = 8*C5 + 10000 (u16 range 10.000 .. +42.760) | |
0 | 788 clrf isr_xA+1 |
789 movlw d'8' | |
790 movwf isr_xA+0 | |
623 | 791 MOVII C5,isr_xB |
792 call isr_unsigned_mult16x16 ; isr_xA*isr_xB=isr_xC | |
793 MOVII isr_xC,C5 | |
604 | 794 movlw LOW d'10000' |
795 addwf C5+0,F | |
796 movlw HIGH d'10000' | |
623 | 797 addwfc C5+1,F ; = 8*C5 + 10000 |
0 | 798 |
623 | 799 ; calculate C6 (16Bit) |
0 | 800 clrf C6+1 |
255 | 801 movff ir_s8_buffer+6,C6+0 |
0 | 802 bcf C6+0,7 |
803 | |
643 | 804 get_calibration_data2: |
623 | 805 clrf sensor_state_counter ; reset state counter |
806 bcf block_sensor_interrupt ; re-enable sensor interrupts | |
807 banksel common ; back to bank common | |
808 return ; done | |
0 | 809 |
634 | 810 |
811 ;----------------------------------------------------------------------------- | |
812 ; Helper Function - Reset Chip | |
813 ; | |
0 | 814 reset_MS5541_one: |
634 | 815 bsf MS5541_mosi ; set MOSI |
623 | 816 bra send_clk_pulse ; send one high-low sequence on MS5541_clk and return |
0 | 817 |
818 reset_MS5541_zero: | |
634 | 819 bcf MS5541_mosi ; clear MOSI |
623 | 820 bra send_clk_pulse ; send one high-low sequence on MS5541_clk and return |
0 | 821 |
822 reset_MS5541: | |
604 | 823 rcall reset_MS5541_one ; 0 |
0 | 824 rcall reset_MS5541_zero |
825 rcall reset_MS5541_one | |
826 rcall reset_MS5541_zero | |
827 rcall reset_MS5541_one | |
828 rcall reset_MS5541_zero | |
829 rcall reset_MS5541_one | |
830 rcall reset_MS5541_zero | |
831 rcall reset_MS5541_one | |
832 rcall reset_MS5541_zero | |
833 rcall reset_MS5541_one | |
834 rcall reset_MS5541_zero | |
835 rcall reset_MS5541_one | |
836 rcall reset_MS5541_zero | |
837 rcall reset_MS5541_one | |
604 | 838 rcall reset_MS5541_zero ; 15 |
839 rcall reset_MS5541_zero | |
840 rcall reset_MS5541_zero | |
841 rcall reset_MS5541_zero | |
842 rcall reset_MS5541_zero | |
843 rcall reset_MS5541_zero ; 20 | |
0 | 844 return |
845 | |
623 | 846 |
634 | 847 ;----------------------------------------------------------------------------- |
848 ; Helper Function - read 2 Byte from Chip | |
849 ; | |
0 | 850 get_2bytes_MS5541: |
634 | 851 movlw d'8' ; load counter for 8 bit |
852 movwf clock_count ; ... | |
853 rcall recieve_loop ; receive 8 bits | |
854 movff dbuffer,dMSB ; store result | |
855 movlw d'8' ; load counter for 8 bit | |
856 movwf clock_count ; ... | |
857 rcall recieve_loop ; receive 8 bits | |
858 movff dbuffer,dLSB ; store result | |
623 | 859 bra send_clk_pulse ; send one high-low sequence on MS5541_clk and return |
0 | 860 |
634 | 861 |
862 ;----------------------------------------------------------------------------- | |
863 ; Helper Function - read 1 Bit from Chip | |
864 ; | |
0 | 865 recieve_loop: |
623 | 866 rcall send_clk_pulse ; send one high-low sequence on MS5541_clk |
634 | 867 btfss MS5541_miso ; read bit = 1 ? (MSB first) |
868 bcf STATUS,C ; NO - clear carry bit | |
869 btfsc MS5541_miso ; read bit = 0 ? (MSB first) | |
870 bsf STATUS,C ; NO - set carry bit | |
871 rlcf dbuffer,F ; shift buffer | |
872 decfsz clock_count,F ; decrement counter, became zero? | |
873 bra recieve_loop ; NO - loop | |
874 return ; YES - done | |
0 | 875 |
634 | 876 |
877 ;----------------------------------------------------------------------------- | |
878 ; Helper Function - send a Clock Pulse | |
879 ; | |
0 | 880 send_clk_pulse: |
634 | 881 bsf MS5541_clk ; set clock |
0 | 882 nop |
883 nop | |
884 nop | |
885 nop | |
29
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
0
diff
changeset
|
886 nop |
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
0
diff
changeset
|
887 nop |
634 | 888 bcf MS5541_clk ; release clock |
0 | 889 nop |
890 nop | |
29
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
0
diff
changeset
|
891 nop |
50c3e2c7ba7a
adding cardinal (and ordinal) directions for the compass
heinrichsweikamp
parents:
0
diff
changeset
|
892 nop |
634 | 893 return ; done |
0 | 894 |
623 | 895 |
634 | 896 ;----------------------------------------------------------------------------- |
897 ; Helper Function - send a Command | |
898 ; | |
0 | 899 send_data_MS5541: |
623 | 900 movwf clock_count ; from WREG |
901 ; send three start bits first | |
634 | 902 bcf MS5541_clk ; revoke clock |
903 nop ; wait | |
904 nop ; wait | |
905 bsf MS5541_mosi ; set MOSI | |
906 movlw d'3' ; compute total bit counter | |
907 subwf clock_count,F ; ... | |
623 | 908 rcall send_clk_pulse ; send one high-low sequence on MS5541_clk |
909 rcall send_clk_pulse ; send one high-low sequence on MS5541_clk | |
910 rcall send_clk_pulse ; send one high-low sequence on MS5541_clk | |
634 | 911 |
912 send_data_MS5541_loop: | |
913 ; now send 8 bits from dbuffer and fill-up with zeros | |
914 bcf MS5541_clk ; revoke clock | |
915 nop ; wait | |
916 nop ; wait | |
917 btfss dbuffer,7 ; bit = 1 ? (MSB first) | |
918 bcf MS5541_mosi ; NO - clear MOSI | |
919 btfsc dbuffer,7 ; bit = 0 ? (MSB first) | |
920 bsf MS5541_mosi ; NO - set MOSI | |
921 bsf MS5541_clk ; set clock | |
922 bcf STATUS,C ; clear carry bit | |
923 rlcf dbuffer,F ; shift data byte | |
924 nop ; wait | |
925 nop ; wait | |
0 | 926 ; nop |
927 ; nop | |
928 ; nop | |
929 ; nop | |
930 ; bcf MS5541_clk | |
634 | 931 decfsz clock_count,F ; decrement bit counter, became zero? |
932 bra send_data_MS5541_loop ; NO - loop | |
933 bcf MS5541_clk ; YES - revoke clock | |
934 return ; - done | |
0 | 935 |
634 | 936 ;----------------------------------------------------------------------------- |
937 | |
938 END |