Mercurial > public > hwos_code
annotate src/adc_lightsensor.asm @ 618:7b3903536213
work on new battery menu
| author | heinrichsweikamp |
|---|---|
| date | Mon, 04 Feb 2019 22:57:24 +0100 |
| parents | b87f23fae743 |
| children | c40025d8e750 be8787f2034d |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 604 | 3 ; File adc.asm V2.99e |
| 0 | 4 ; |
| 5 ; | |
| 6 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 7 ;============================================================================= | |
| 8 ; HISTORY | |
| 9 ; 2011-08-08 : [mH] moving from OSTC code | |
| 10 | |
| 275 | 11 #include "hwos.inc" |
| 0 | 12 #include "math.inc" |
| 13 #include "wait.inc" | |
| 14 #include "eeprom_rs232.inc" | |
| 113 | 15 #include "i2c.inc" |
| 0 | 16 |
| 582 | 17 extern reset_battery_internal_only |
| 18 | |
| 604 | 19 adc_light CODE |
| 582 | 20 |
| 21 ;============================================================================= | |
| 0 | 22 |
| 23 wait_adc: | |
| 24 movwf ADCON0 | |
| 608 | 25 nop |
| 26 nop | |
| 582 | 27 nop |
| 28 bsf ADCON0,1 ; start ADC | |
| 0 | 29 wait_adc2: |
| 604 | 30 btfsc ADCON0,1 ; wait... |
| 0 | 31 bra wait_adc2 |
| 582 | 32 return |
| 0 | 33 |
| 34 global get_battery_voltage | |
| 582 | 35 get_battery_voltage: ; starts ADC and waits until finished |
| 36 btfss battery_gauge_available | |
| 604 | 37 bra get_battery_voltage1 ; normal ostc3 hardware |
| 113 | 38 |
| 582 | 39 call lt2942_get_accumulated_charge |
| 40 call lt2942_get_voltage | |
| 615 | 41 call lt2942_get_temperature |
| 42 | |
| 604 | 43 tstfsz batt_voltage+1 ; < 256 mV ? |
| 44 bra get_battery_voltage_noretry ; NO | |
| 218 | 45 |
| 582 | 46 ; Retry |
| 47 call lt2942_get_accumulated_charge | |
| 48 call lt2942_get_voltage | |
| 615 | 49 call lt2942_get_temperature |
| 582 | 50 |
| 466 | 51 get_battery_voltage_noretry: |
| 582 | 52 btfsc divemode |
| 604 | 53 return ; not in divemode |
| 218 | 54 |
| 582 | 55 bcf cv_active |
| 56 bcf cc_active | |
| 57 bcf LEDr | |
| 58 bcf TRISJ,2 ; Chrg-Out output | |
| 59 bsf CHRG_OUT | |
| 120 | 60 |
| 582 | 61 btfss CHRG_IN |
| 62 bra charge_cc_active | |
| 120 | 63 |
| 582 | 64 bcf CHRG_OUT |
| 65 bsf TRISJ,2 ; Chrg-Out high impedance | |
| 120 | 66 |
| 582 | 67 WAITMS d'1' |
| 120 | 68 |
| 582 | 69 btfsc CHRG_IN |
| 615 | 70 return ; Not charging, done. |
| 603 | 71 charge_cv_active: |
| 582 | 72 decfsz get_bat_volt_counter,F |
| 73 return | |
| 74 movlw .15 | |
| 604 | 75 cpfsgt batt_voltage+1 ; battery voltage >= 16*256mV (4,096V)? |
| 76 bra charge_cc_active ; NO | |
| 582 | 77 bsf cc_active |
| 78 bsf cv_active | |
| 604 | 79 bsf LEDr ; indicate charging |
| 80 call lt2942_charge_done ; reset accumulating registers to 0xFFFF | |
| 582 | 81 WAITMS d'10' |
| 604 | 82 bcf LEDr ; indicate charging |
| 582 | 83 bsf get_bat_volt_counter,0 ; =1 |
| 84 return | |
| 120 | 85 |
| 207 | 86 charge_cc_active: |
| 582 | 87 bsf cc_active |
| 604 | 88 bsf LEDr ; indicate charging |
| 582 | 89 bcf CHRG_OUT |
| 604 | 90 bsf TRISJ,2 ; chrg-Out high impedance |
| 603 | 91 movlw .15 |
| 604 | 92 cpfsgt batt_voltage+1 ; battery voltage >= 16*256mV (4.096 V)? |
| 93 bra charge_cc_active2 ; NO | |
| 603 | 94 movlw .81 |
| 604 | 95 cpfslt batt_voltage+0 ; battery voltage >= 80mV (+4096mV from batt_voltage+1)? |
| 96 bra charge_cv_active ; YES | |
| 603 | 97 charge_cc_active2: |
| 582 | 98 movlw .10 |
| 99 movwf get_bat_volt_counter | |
| 100 return | |
| 113 | 101 |
| 102 get_battery_voltage1: | |
| 615 | 103 ; Additional disable in software |
| 104 bsf charge_disable | |
| 105 bcf TRISE,2 | |
| 106 bsf adc_running ; =1: The ADC is in use | |
| 107 | |
| 582 | 108 movlw b'00100000' ; 2.048V Vref+ -> 1LSB = 500µV |
| 0 | 109 movwf ADCON1 |
| 582 | 110 movlw b'00011001' ; power on ADC, select AN6 |
| 111 rcall wait_adc | |
| 0 | 112 |
| 582 | 113 movff ADRESH,batt_voltage+1 ; store value |
| 114 movff ADRESL,batt_voltage+0 ; store value | |
| 115 bcf ADCON0,0 ; power off ADC | |
| 0 | 116 |
| 604 | 117 ; Multiply with 2.006 to be exact here... |
| 0 | 118 ; bcf STATUS,C |
| 119 ; rlcf xA+0,F | |
| 120 ; | |
| 582 | 121 ; rlcf xA+1,F ; x2 |
| 0 | 122 |
| 582 | 123 ; movff xA+0,batt_voltage+0 ; store value |
| 0 | 124 ; movff xA+1,batt_voltage+1 |
| 125 | |
| 582 | 126 movlw LOW lithium_36v_low |
| 0 | 127 movwf sub_a+0 |
| 582 | 128 movlw HIGH lithium_36v_low |
| 0 | 129 movwf sub_a+1 |
| 130 movff batt_voltage+0,sub_b+0 | |
| 131 movff batt_voltage+1,sub_b+1 | |
| 582 | 132 call subU16 ; sub_c = sub_a - sub_b |
| 604 | 133 ; Battery is 3.6V (> lithium_36v_low?) |
| 0 | 134 btfss neg_flag |
| 604 | 135 bra get_battery_voltage4 ; NO - use 1.5V |
| 136 bsf battery_is_36v ; YES - set flag (Cleared in power-on reset only!) | |
| 0 | 137 |
| 582 | 138 ; Check if the battery is near-dead already |
| 139 movlw LOW lithium_36v_empty | |
| 0 | 140 movwf sub_a+0 |
| 582 | 141 movlw HIGH lithium_36v_empty |
| 0 | 142 movwf sub_a+1 |
| 582 | 143 call subU16 ; sub_c = sub_a - sub_b |
| 604 | 144 ; Battery is not dead yet (> lithium_36v_empty)? |
| 0 | 145 btfsc neg_flag |
| 604 | 146 bra get_battery_voltage2 ; YES - battery is still ok |
| 0 | 147 |
| 582 | 148 ; Battery is probably dead very soon |
| 149 ; Set ">=24Ah used" into battery gauge registers | |
| 150 movlw .128 | |
| 151 movff WREG,battery_gauge+5 | |
| 0 | 152 |
| 153 get_battery_voltage2: | |
| 604 | 154 ; Use 3.6V battery gauging mode |
| 0 | 155 movff battery_gauge+5,xC+3 |
| 156 movff battery_gauge+4,xC+2 | |
| 157 movff battery_gauge+3,xC+1 | |
| 158 movff battery_gauge+2,xC+0 | |
| 604 | 159 ; battery_gauge: 6 is nAs |
| 160 ; divide through 65536 | |
| 161 ; divide through battery_capacity:2 | |
| 162 ; result is in percent | |
| 448 | 163 movff internal_battery_capacity+0,xB+0 |
| 164 movff internal_battery_capacity+1,xB+1 | |
| 604 | 165 call div32x16 ; xC:4 = xC:4 / xB:2 with xA as remainder |
| 0 | 166 movff xC+0,lo |
| 604 | 167 ; limit to 100 |
| 582 | 168 movlw .100 |
| 169 cpfslt lo | |
| 170 movwf lo | |
| 604 | 171 ; lo will be between 0 (full) and 100 (empty) |
| 0 | 172 movf lo,W |
| 173 sublw .100 | |
| 174 movwf lo | |
| 175 get_battery_voltage3: | |
| 176 movlw .100 | |
| 177 cpfslt lo | |
| 178 movwf lo | |
| 604 | 179 ; lo will be between 100 (full) and 0 (empty) |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
180 |
| 604 | 181 ; use 3.6V battery sensing based on 50 mA load |
| 582 | 182 ; 75% |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
183 movff batt_voltage+0,sub_b+0 |
|
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
184 movff batt_voltage+1,sub_b+1 |
| 582 | 185 movlw LOW lithium_36v_75 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
186 movwf sub_a+0 |
| 582 | 187 movlw HIGH lithium_36v_75 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
188 movwf sub_a+1 |
| 582 | 189 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
190 btfsc neg_flag |
| 582 | 191 bra get_battery_voltage3a |
| 192 movlw .75 | |
| 193 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
194 get_battery_voltage3a: |
|
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
195 ; 50% |
| 582 | 196 movlw LOW lithium_36v_50 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
197 movwf sub_a+0 |
| 582 | 198 movlw HIGH lithium_36v_50 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
199 movwf sub_a+1 |
| 582 | 200 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
201 btfsc neg_flag |
| 582 | 202 bra get_battery_voltage3b |
| 203 movlw .50 | |
| 204 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
205 get_battery_voltage3b: |
| 582 | 206 ; 25% |
| 207 movlw LOW lithium_36v_25 | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
208 movwf sub_a+0 |
| 582 | 209 movlw HIGH lithium_36v_25 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
210 movwf sub_a+1 |
| 582 | 211 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
212 btfsc neg_flag |
| 582 | 213 bra get_battery_voltage3c |
| 214 movlw .25 | |
| 215 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
216 get_battery_voltage3c: |
| 582 | 217 ; 10% |
| 218 movlw LOW lithium_36v_10 | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
219 movwf sub_a+0 |
| 582 | 220 movlw HIGH lithium_36v_10 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
221 movwf sub_a+1 |
| 582 | 222 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
223 btfsc neg_flag |
| 582 | 224 bra get_battery_voltage3d |
| 225 movlw .10 | |
| 226 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
227 get_battery_voltage3d: |
|
44
18fe4e668baa
BUGFIX: Percent display with 1,5V batteries
heinrichsweikamp
parents:
37
diff
changeset
|
228 movlw .100 |
|
18fe4e668baa
BUGFIX: Percent display with 1,5V batteries
heinrichsweikamp
parents:
37
diff
changeset
|
229 cpfslt lo |
|
18fe4e668baa
BUGFIX: Percent display with 1,5V batteries
heinrichsweikamp
parents:
37
diff
changeset
|
230 movwf lo |
| 604 | 231 ; lo will be between 100 (full) and 0 (empty) |
| 582 | 232 movf batt_percent,W |
| 233 cpfsgt lo ; keep batt_percent on the lowest value found | |
| 234 movff lo,batt_percent ; store value | |
| 604 | 235 btfsc battery_is_36v ; but always use computed value for 3.6V battery |
| 582 | 236 movff lo,batt_percent ; store value |
| 604 | 237 bcf adc_running ; =1: the ADC is in use |
| 0 | 238 return |
| 239 | |
| 240 get_battery_voltage4: | |
| 604 | 241 ; use 1.5V battery voltage mode |
| 242 ; use approximation (batt_voltage:2-aa_15v_low)/4 = lo | |
| 0 | 243 movff batt_voltage+0,sub_a+0 |
| 244 movff batt_voltage+1,sub_a+1 | |
| 582 | 245 movlw LOW aa_15v_low |
| 246 movwf sub_b+0 | |
| 247 movlw HIGH aa_15v_low | |
| 0 | 248 movwf sub_b+1 |
| 582 | 249 call subU16 ; sub_c = sub_a - sub_b |
| 250 bcf STATUS,C | |
| 251 rrcf sub_c+1 | |
| 252 rrcf sub_c+0 ; /2 | |
| 253 bcf STATUS,C | |
| 254 rrcf sub_c+1 | |
| 255 rrcf sub_c+0 ; /4 | |
| 256 movff sub_c+0,lo | |
| 604 | 257 bra get_battery_voltage3d ; check limits and return |
| 0 | 258 |
| 259 global get_ambient_level | |
| 582 | 260 get_ambient_level: ; starts ADC and waits until finished |
| 261 btfsc adc_running ; ADC in use? | |
| 604 | 262 return ; YES - return |
| 0 | 263 |
| 582 | 264 btfsc ambient_sensor |
| 604 | 265 bra get_ambient_level1 ; normal OSTC3 hardware |
| 203 | 266 |
| 604 | 267 banksel isr_backup ; back to bank0 ISR data |
| 203 | 268 movff opt_brightness,isr1_temp |
| 582 | 269 incf isr1_temp,F ; adjust 0-2 to 1-3 |
| 270 movlw ambient_light_max_high_cr ; cR and 2 hardware brightest setting | |
| 203 | 271 dcfsnz isr1_temp,F |
| 582 | 272 movlw ambient_light_max_eco ; brightest setting |
| 203 | 273 dcfsnz isr1_temp,F |
| 582 | 274 movlw ambient_light_max_medium ; brightest setting |
| 203 | 275 |
| 604 | 276 movff WREG,ambient_light+0 ; set to max. |
| 277 movff ambient_light+0,max_CCPR1L ; store value for dimming in TMR7 interrupt | |
| 203 | 278 return |
| 113 | 279 |
| 280 get_ambient_level1: | |
| 582 | 281 movlw b'00000000' ; Vref+ = Vdd |
| 0 | 282 movwf ADCON1 |
| 582 | 283 movlw b'00011101' ; power on ADC, select AN7 |
| 284 rcall wait_adc | |
| 0 | 285 |
| 286 movff ADRESH,ambient_light+1 | |
| 287 movff ADRESL,ambient_light+0 | |
| 582 | 288 bcf ADCON0,0 ; power off ADC |
| 0 | 289 |
| 290 ; ambient_light:2 is between 4096 (direct sunlight) and about 200 (darkness) | |
| 604 | 291 ; first: divide by 16 |
| 582 | 292 banksel ambient_light |
| 0 | 293 bcf STATUS,C |
| 294 rrcf ambient_light+1 | |
| 295 rrcf ambient_light+0 | |
| 296 bcf STATUS,C | |
| 297 rrcf ambient_light+1 | |
| 298 rrcf ambient_light+0 | |
| 299 bcf STATUS,C | |
| 300 rrcf ambient_light+1 | |
| 301 rrcf ambient_light+0 | |
| 302 bcf STATUS,C | |
| 303 rrcf ambient_light+1 | |
| 304 rrcf ambient_light+0 | |
| 604 | 305 ; result: ambient_light:2/16 |
| 306 ; now make sure to have value between ambient_light_low and ambient_light_max | |
| 0 | 307 |
| 582 | 308 movlw .254 |
| 604 | 309 tstfsz ambient_light+1 ; > 255 ? |
| 310 movwf ambient_light+0 ; YES - avoid ADC clipping | |
| 0 | 311 |
| 604 | 312 incfsz ambient_light+0,W ; = 255 ? |
| 313 bra get_ambient_level2 ; NO - continue | |
| 0 | 314 |
| 582 | 315 movlw .254 |
| 316 movwf ambient_light+0 ; avoid ADC clipping | |
| 0 | 317 |
| 318 get_ambient_level2: | |
| 582 | 319 ; movlw .10 |
| 604 | 320 ; subwf ambient_light+0,F ; subtract 10 (ADC Offset) |
| 582 | 321 ; btfsc STATUS,N |
| 322 ; movwf ambient_light+0 ; avoid clipping | |
| 201 | 323 |
| 604 | 324 banksel isr_backup ; back to bank0 ISR data |
| 0 | 325 movff opt_brightness,isr1_temp |
| 326 | |
| 582 | 327 btfsc RCSTA1,7 ; UART module on? |
| 604 | 328 clrf isr1_temp ; YES - set temporally to eco mode |
| 0 | 329 |
| 582 | 330 incf isr1_temp,F ; adjust 0-2 to 1-3 |
| 0 | 331 |
| 582 | 332 banksel common ; flag is in bank1 |
| 333 movlw ambient_light_max_high_cr ; cR and 2 hardware brightest setting | |
| 334 btfss battery_gauge_available | |
| 604 | 335 movlw ambient_light_max_high_15V ; 1.5V battery brightest setting |
| 336 btfsc battery_is_36v ; 3.6V battery in use? | |
| 337 movlw ambient_light_max_high_36V ; YES - 3.6V battery brightest setting | |
| 338 banksel isr_backup ; back to bank0 ISR data | |
| 0 | 339 |
| 340 dcfsnz isr1_temp,F | |
| 582 | 341 movlw ambient_light_max_eco ; brightest setting |
| 0 | 342 dcfsnz isr1_temp,F |
| 582 | 343 movlw ambient_light_max_medium ; brightest setting |
| 0 | 344 |
| 582 | 345 banksel ambient_light |
| 346 incf ambient_light+0,F ; +1 | |
| 604 | 347 cpfslt ambient_light+0 ; smaller than WREG? |
| 348 movwf ambient_light+0 ; NO - set to max. | |
| 0 | 349 |
| 604 | 350 banksel isr_backup ; back to bank0 ISR data |
| 0 | 351 movff opt_brightness,isr1_temp |
| 582 | 352 incf isr1_temp,F ; adjust 0-2 to 1-3 |
| 353 movlw ambient_light_min_high ; darkest setting | |
| 0 | 354 |
| 355 dcfsnz isr1_temp,F | |
| 582 | 356 movlw ambient_light_min_eco ; darkest setting |
| 0 | 357 dcfsnz isr1_temp,F |
| 582 | 358 movlw ambient_light_min_medium ; darkest setting |
| 0 | 359 dcfsnz isr1_temp,F |
| 582 | 360 movlw ambient_light_min_high ; darkest setting |
| 361 | |
| 362 banksel ambient_light | |
| 604 | 363 cpfsgt ambient_light+0 ; bigger than WREG? |
| 364 movwf ambient_light+0 ; NO - set to min | |
| 582 | 365 banksel common |
| 366 | |
| 604 | 367 movff ambient_light+0,max_CCPR1L ; store value for dimming in TMR7 interrupt |
| 0 | 368 return |
| 369 | |
| 113 | 370 global get_analog_inputs |
| 604 | 371 get_analog_inputs: ; start ADC and wait until finished |
| 582 | 372 bsf adc_running ; =1: The ADC is in use |
| 373 btfsc TFT_PWM | |
| 604 | 374 bra get_analog_inputs ; wait for PWM low |
| 375 movlw b'00100000' ; 2.048V Vref+ -> 1 LSB = 500 µV | |
| 113 | 376 movwf ADCON1 |
| 582 | 377 movlw b'00100001' ; power on ADC, select AN8 |
| 378 rcall wait_adc | |
| 379 bcf STATUS,C | |
| 380 rrcf ADRESH,F ; /2 | |
| 381 rrcf ADRESL,W | |
| 604 | 382 ; add to o2_mv_sensor1:2 |
| 582 | 383 addwf o2_mv_sensor1+0,F |
| 384 movf ADRESH,W | |
| 385 addwfc o2_mv_sensor1+1,F | |
| 604 | 386 ; divide by 2 |
| 582 | 387 bcf STATUS,C |
| 388 rrcf o2_mv_sensor1+1,F ; /2 | |
| 389 rrcf o2_mv_sensor1+0,F | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
390 |
| 582 | 391 movlw HIGH ignore_mv |
| 604 | 392 cpfsgt o2_mv_sensor1+1 ; > ignore_mv ? |
| 393 bra get_analog_inputs2a ; NO | |
| 394 ; YES - ignore this reading | |
| 582 | 395 clrf o2_mv_sensor1+1 |
| 396 clrf o2_mv_sensor1+0 | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
397 get_analog_inputs2a: |
| 604 | 398 ; ignore 1.9 mV noise for not-connected inputs |
| 399 tstfsz o2_mv_sensor1+1 ; > 25.5mV ? | |
| 400 bra get_analog_inputs2 ; YES - skip here | |
| 582 | 401 movlw .19 |
| 604 | 402 cpfsgt o2_mv_sensor1+0 ; > 1.9mV ? |
| 403 clrf o2_mv_sensor1+0 ; NO - clear result | |
|
187
669b5d00706d
CHANGE: Longer timeout (4 min) for calibration menu
heinrichsweikamp
parents:
158
diff
changeset
|
404 get_analog_inputs2: |
| 582 | 405 movlw b'00100101' ; power on ADC, select AN9 |
| 406 rcall wait_adc | |
| 407 bcf STATUS,C | |
| 408 rrcf ADRESH,F ; /2 | |
| 409 rrcf ADRESL,W | |
| 604 | 410 ; add to o2_mv_sensor2:2 |
| 582 | 411 addwf o2_mv_sensor2+0,F |
| 412 movf ADRESH,W | |
| 413 addwfc o2_mv_sensor2+1,F | |
| 604 | 414 ; divide by 2 |
| 582 | 415 bcf STATUS,C |
| 416 rrcf o2_mv_sensor2+1,F ; /2 | |
| 417 rrcf o2_mv_sensor2+0,F | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
418 |
| 582 | 419 movlw HIGH ignore_mv |
| 604 | 420 cpfsgt o2_mv_sensor2+1 ; > ignore_mv ? |
| 421 bra get_analog_inputs3a ; NO | |
| 422 ; YES - ignore this reading | |
| 582 | 423 clrf o2_mv_sensor2+1 |
| 424 clrf o2_mv_sensor2+0 | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
425 get_analog_inputs3a: |
| 604 | 426 ; ignore 1.9 mV noise for not-connected inputs |
| 427 tstfsz o2_mv_sensor2+1 ; > 25.5 mV ? | |
| 428 bra get_analog_inputs3 ; YES - skip here | |
| 582 | 429 movlw .19 |
| 604 | 430 cpfsgt o2_mv_sensor2+0 ; > 1.9 mV ? |
| 431 clrf o2_mv_sensor2+0 ; NO - clear result | |
|
187
669b5d00706d
CHANGE: Longer timeout (4 min) for calibration menu
heinrichsweikamp
parents:
158
diff
changeset
|
432 get_analog_inputs3: |
| 582 | 433 movlw b'00101001' ; power on ADC, select AN10 |
| 434 rcall wait_adc | |
| 435 bcf STATUS,C | |
| 436 rrcf ADRESH,F ; /2 | |
| 437 rrcf ADRESL,W | |
| 604 | 438 ; add to o2_mv_sensor3:2 |
| 582 | 439 addwf o2_mv_sensor3+0,F |
| 440 movf ADRESH,W | |
| 441 addwfc o2_mv_sensor3+1,F | |
| 604 | 442 ; divide by 2 |
| 582 | 443 bcf STATUS,C |
| 444 rrcf o2_mv_sensor3+1,F ; /2 | |
| 445 rrcf o2_mv_sensor3+0,F | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
446 |
| 582 | 447 movlw HIGH ignore_mv |
| 604 | 448 cpfsgt o2_mv_sensor3+1 ; > ignore_mv ? |
| 449 bra get_analog_inputs4a ; NO | |
| 450 ; YES - ignore this reading | |
| 582 | 451 clrf o2_mv_sensor3+1 |
| 452 clrf o2_mv_sensor3+0 | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
453 get_analog_inputs4a: |
| 604 | 454 ; ignore 1.9mV noise for not-connected inputs |
| 455 tstfsz o2_mv_sensor3+1 ; > 25.5 mV ? | |
| 456 bra get_analog_inputs4 ; YES - skip here | |
| 582 | 457 movlw .19 |
| 604 | 458 cpfsgt o2_mv_sensor3+0 ; > 1.9 mV ? |
| 459 clrf o2_mv_sensor3+0 ; NO - clear result | |
|
187
669b5d00706d
CHANGE: Longer timeout (4 min) for calibration menu
heinrichsweikamp
parents:
158
diff
changeset
|
460 get_analog_inputs4: |
| 582 | 461 bcf ADCON0,0 ; power off ADC |
| 604 | 462 bcf adc_running ; =1: the ADC is in use |
| 582 | 463 return |
| 0 | 464 |
| 604 | 465 global piezo_config ; set up piezo sensitivity of heinrichs weikamp piezo buttons (~30ms) |
| 466 piezo_config: ; settings between 20 and 200 | |
| 582 | 467 clrf TMR5H |
| 468 clrf TMR5L ; ~2sec | |
| 604 | 469 bcf PIR5,TMR5IF ; clear flag |
| 582 | 470 bcf switch_right |
| 471 bcf switch_left | |
|
416
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
472 piezo_config0: |
|
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
473 btfsc switch_right |
| 582 | 474 bra piezo_config |
|
416
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
475 btfsc switch_left |
| 604 | 476 bra piezo_config ; restart on button press |
| 582 | 477 |
|
416
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
478 btfss PIR5,TMR5IF |
| 604 | 479 bra piezo_config0 ; wait loop |
| 468 | 480 |
| 582 | 481 bcf INTCON,GIE |
| 604 | 482 |
| 582 | 483 movff opt_cR_button_right,WREG ; right button |
| 484 btfsc flip_screen ; 180° rotation ? | |
| 604 | 485 movff opt_cR_button_left,WREG ; YES - left button |
| 582 | 486 rcall piezo_config_tx |
|
343
34e2f5bdc5a2
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
heinrichsweikamp
parents:
275
diff
changeset
|
487 |
| 582 | 488 movff opt_cR_button_left,WREG ; left button |
| 489 btfsc flip_screen ; 180° rotation ? | |
| 604 | 490 movff opt_cR_button_right,WREG ; YES - right button |
| 582 | 491 rcall piezo_config_tx |
|
343
34e2f5bdc5a2
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
heinrichsweikamp
parents:
275
diff
changeset
|
492 |
| 582 | 493 movlw .20 ; reserved |
| 494 rcall piezo_config_tx | |
| 495 movlw .20 ; reserved | |
| 496 rcall piezo_config_tx | |
| 604 | 497 |
| 582 | 498 bsf INTCON,GIE |
| 499 return | |
| 204 | 500 |
| 582 | 501 piezo_config_tx: ; send one byte |
| 502 movwf lo ; store byte | |
| 503 movlw .8 | |
| 504 movwf hi ; bit counter | |
| 505 bcf TX3_PIEZO_CFG ; start bit | |
| 506 rcall piezo_config_wait_bit | |
| 113 | 507 piezo_config_tx_loop: |
| 582 | 508 btfss lo,0 ; LSB first |
| 509 bcf TX3_PIEZO_CFG | |
| 510 btfsc lo,0 ; LSB first | |
| 511 bsf TX3_PIEZO_CFG | |
| 512 rcall piezo_config_wait_bit | |
| 513 rrncf lo,F | |
| 514 decfsz hi,F | |
| 515 bra piezo_config_tx_loop | |
| 516 bsf TX3_PIEZO_CFG ; stop bit | |
| 517 rcall piezo_config_wait_bit | |
| 518 return | |
| 113 | 519 |
| 520 piezo_config_wait_bit: | |
| 582 | 521 setf TMR5H |
| 522 movlw .255-.26 ; 26 x 31,5µs = 819us | |
| 113 | 523 movwf TMR5L |
| 604 | 524 bcf PIR5,TMR5IF ; clear flag |
| 113 | 525 piezo_config_wait_bit3: |
| 582 | 526 btfss PIR5,TMR5IF |
| 604 | 527 bra piezo_config_wait_bit3 ; wait loop |
| 113 | 528 return |
| 529 | |
| 582 | 530 global reset_battery_pointer |
| 604 | 531 reset_battery_pointer: ; reset battery pointer 0x07-0x0C and battery_gauge:5 |
| 582 | 532 extern lt2942_charge_done |
| 604 | 533 btfsc battery_gauge_available ; something to reset? |
| 534 call lt2942_charge_done ; YES - reset accumulating registers to 0xFFFF | |
| 582 | 535 goto reset_battery_internal_only ; and return |
| 536 | |
| 537 | |
| 538 global get_analog_switches | |
| 604 | 539 get_analog_switches: ; start ADC and wait until finished |
| 540 btfsc analog_switches ; does the OSTC have analog switches? | |
| 541 bra get_analog_switches2 ; YES | |
| 542 ; NO | |
| 543 bcf analog_sw1_pressed ; NO - clear flag for analog switch 1 | |
| 544 bcf analog_sw2_pressed ; - clear flag for analog switch 2 | |
| 545 return ; - done | |
| 582 | 546 get_analog_switches2: |
| 547 btfsc adc_running ; ADC in use? | |
| 604 | 548 return ; YES - abort |
| 549 ; NO | |
| 582 | 550 movlw b'00001001' ; left justified |
| 551 movwf ADCON2 | |
| 552 ; movlw b'00000000' ; Vref+ = Vdd | |
| 553 clrf ADCON1 | |
| 554 movlw b'00100101' ; power on ADC, select AN9 | |
| 555 rcall wait_adc | |
| 556 banksel analog_counter | |
| 557 movff ADRESH,WREG | |
| 558 addwf analog_sw2_raw+0 | |
| 559 movlw .0 | |
| 560 addwfc analog_sw2_raw+1 | |
| 561 decfsz analog_counter,F ; continue averaging? | |
| 604 | 562 bra get_analog_switches2a ; YES |
| 563 ; NO - done, compute average | |
| 582 | 564 bcf STATUS,C |
| 565 rrcf analog_sw2_raw+1 | |
| 566 rrcf analog_sw2_raw+0 ; /2 | |
| 567 bcf STATUS,C | |
| 568 rrcf analog_sw2_raw+1 | |
| 569 rrcf analog_sw2_raw+0 ; /4 | |
| 570 bcf STATUS,C | |
| 571 rrcf analog_sw2_raw+1 | |
| 572 rrcf analog_sw2_raw+0 ; /8 | |
| 573 bcf STATUS,C | |
| 574 rrcf analog_sw2_raw+1 | |
| 575 rrcf analog_sw2_raw+0 ; /16 | |
| 576 movff analog_sw2_raw+0,analog_sw2 | |
| 577 clrf analog_sw2_raw+1 | |
| 604 | 578 clrf analog_sw2_raw+0 ; reset average registers |
| 582 | 579 ; movlw .16 |
| 580 ; movwf analog_counter ; only once... | |
| 581 get_analog_switches2a: | |
| 582 banksel common | |
| 583 bcf analog_sw2_pressed | |
| 604 | 584 movff opt_cR_button_left,WREG ; 20-100 |
| 582 | 585 bcf STATUS,C |
| 604 | 586 rrcf WREG ; /2 -> 10-50 |
| 582 | 587 bcf STATUS,C |
| 604 | 588 rrcf WREG ; /2 -> 5-25 |
| 589 decf WREG,W ; -1 | |
| 590 decf WREG,W ; -1 | |
| 591 decf WREG,W ; -1 -> 2-22 | |
| 582 | 592 banksel analog_sw2 |
| 604 | 593 btfss button_polarity,1 ; (1= normal, 0=inverted) |
| 582 | 594 bra sw2_inverted |
| 595 addwf analog_sw2,W ; average (~128) | |
| 596 cpfsgt ADRESH | |
| 597 bra get_analog_sw1 | |
| 598 banksel common | |
| 604 | 599 bsf analog_sw2_pressed ; left button normal |
| 582 | 600 bra get_analog_sw1 |
| 475 | 601 sw2_inverted: |
| 582 | 602 subwf analog_sw2,W ; average (~128) |
| 603 cpfslt ADRESH | |
| 604 bra get_analog_sw1 | |
| 605 banksel common | |
| 604 | 606 bsf analog_sw2_pressed ; left button inverted |
| 448 | 607 get_analog_sw1: |
| 582 | 608 banksel common |
| 609 movlw b'00101001' ; power on ADC, select AN10 | |
| 610 rcall wait_adc | |
| 611 banksel analog_counter | |
| 612 movff ADRESH,WREG | |
| 613 addwf analog_sw1_raw+0 | |
| 614 movlw .0 | |
| 615 addwfc analog_sw1_raw+1 | |
| 616 tstfsz analog_counter ; continue averaging? | |
| 604 | 617 bra get_analog_switches1a ; YES |
| 618 ; NO - done, compute average | |
| 582 | 619 bcf STATUS,C |
| 620 rrcf analog_sw1_raw+1 | |
| 621 rrcf analog_sw1_raw+0 ; /2 | |
| 622 bcf STATUS,C | |
| 623 rrcf analog_sw1_raw+1 | |
| 624 rrcf analog_sw1_raw+0 ; /4 | |
| 625 bcf STATUS,C | |
| 626 rrcf analog_sw1_raw+1 | |
| 627 rrcf analog_sw1_raw+0 ; /8 | |
| 628 bcf STATUS,C | |
| 629 rrcf analog_sw1_raw+1 | |
| 630 rrcf analog_sw1_raw+0 ; /16 | |
| 631 movff analog_sw1_raw+0,analog_sw1 | |
| 632 clrf analog_sw1_raw+1 | |
| 604 | 633 clrf analog_sw1_raw+0 ; reset average registers |
| 582 | 634 movlw .16 |
| 635 movwf analog_counter ; only once... | |
| 636 get_analog_switches1a: | |
| 637 banksel common | |
| 638 bcf analog_sw1_pressed | |
| 604 | 639 movff opt_cR_button_right,WREG ; 20-100 |
| 582 | 640 bcf STATUS,C |
| 604 | 641 rrcf WREG ; /2 -> 10-50 |
| 582 | 642 bcf STATUS,C |
| 604 | 643 rrcf WREG ; /2 -> 5-25 |
| 644 decf WREG,W ; -1 | |
| 645 decf WREG,W ; -1 | |
| 646 decf WREG,W ; -1 -> 2-22 | |
| 582 | 647 banksel analog_sw1 |
| 604 | 648 btfss button_polarity,0 ; (1= normal, 0=inverted) |
| 582 | 649 bra sw1_inverted |
| 650 addwf analog_sw1,W ; average (~128) | |
| 651 cpfsgt ADRESH | |
| 652 bra get_analog_sw_done | |
| 653 banksel common | |
| 654 bsf analog_sw1_pressed ; right button normal | |
| 655 bra get_analog_sw_done | |
| 475 | 656 sw1_inverted: |
| 582 | 657 subwf analog_sw1,W ; average (~128) |
| 658 cpfslt ADRESH | |
| 659 bra get_analog_sw_done | |
| 660 banksel common | |
| 661 bsf analog_sw1_pressed ; right button inverted | |
| 448 | 662 get_analog_sw_done: |
| 582 | 663 banksel common |
| 604 | 664 movlw b'10001101' ; restore to right justified |
| 582 | 665 movwf ADCON2 |
| 666 btfsc analog_sw1_pressed | |
| 667 return | |
| 668 btfsc analog_sw2_pressed | |
| 669 return | |
| 604 | 670 setf TMR1H ; no button pressed, enhance timer1 to overflow quickly |
| 582 | 671 return |
| 448 | 672 |
| 0 | 673 END |