Mercurial > public > hwos_code
annotate src/divemode.asm @ 318:6d8c82fe5a01 new_screen_layout
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
| author | janos_kovacs <kovjanos@gmail.com> |
|---|---|
| date | Thu, 11 Jun 2015 15:16:42 +0100 |
| parents | 4f83470dcece |
| children | 3d43da7acfe1 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 3 ; File divemode.asm | |
| 4 ; | |
| 5 ; Divemode | |
| 6 ; | |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 10 ; 2011-08-15 : [mH] moving from OSTC code | |
| 11 | |
| 275 | 12 #include "hwos.inc" ; Mandatory header |
| 0 | 13 #include "shared_definitions.h" ; Mailbox from/to p2_deco.c |
| 14 #include "tft_outputs.inc" | |
| 15 #include "strings.inc" | |
| 16 #include "tft.inc" | |
| 17 #include "eeprom_rs232.inc" | |
| 18 #include "isr.inc" | |
| 19 #include "math.inc" | |
| 20 #include "wait.inc" | |
| 21 #include "customview.inc" | |
| 22 #include "start.inc" | |
| 23 #include "adc_lightsensor.inc" | |
| 24 #include "ghostwriter.inc" | |
| 25 #include "i2c.inc" | |
| 113 | 26 #include "calibrate.inc" |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
27 #include "convert.inc" |
| 0 | 28 |
| 29 gui CODE | |
| 30 | |
| 31 global diveloop | |
| 32 diveloop: | |
| 33 banksel common | |
| 34 call speed_normal | |
| 35 call diveloop_boot ; Boot tasks for all modes | |
| 36 | |
| 37 ; Startup Tasks for all modes | |
| 206 | 38 call TFT_boot ; Initialize TFT (includes clear screen) |
| 0 | 39 call TFT_divemode_mask ; Display mask |
| 40 call TFT_temp_divemode ; Displays temperature | |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
41 movff customview_divemode,menupos3 ; Reload last customview |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
42 call customview_mask ; Redraw last custom view |
| 0 | 43 |
| 44 btfsc FLAG_apnoe_mode | |
| 45 bsf realdive ; Set Realdive flag in Apnoe mode | |
| 46 | |
| 47 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 48 bra diveloop_loop | |
| 49 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 50 bra diveloop_loop | |
| 51 | |
| 52 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 53 call TFT_display_ndl_mask ; display "NDL" | |
| 54 | |
| 55 ; +@5 init | |
| 56 setf WREG ; WAIT marker: display "---" | |
| 57 movff WREG,int_O_extra_ascenttime+0 | |
| 58 movff WREG,int_O_extra_ascenttime+1 | |
| 59 movlw 1 | |
| 60 movwf apnoe_mins ; Start compute after next cycle. | |
| 61 | |
| 62 ;-------------------------------------------------------------------------------------------------------- | |
| 63 diveloop_loop: ; The diveloop starts here | |
| 64 btfss onesecupdate | |
| 65 bra diveloop_loop3 | |
| 66 | |
| 67 ; tasks any new second... | |
| 178 | 68 bcf onesecupdate ; one seconds update, clear flag here in case it's set again in ISR before all tasks are done. |
| 69 | |
| 0 | 70 btfsc FLAG_apnoe_mode ; Only in apnoe mode |
| 71 bra diveloop_loop1b ; One Second Tasks in Apnoe mode | |
| 72 | |
| 73 call TFT_divemins ; Display (new) divetime! | |
| 74 call customview_second ; Do every-second tasks for the custom view area | |
| 131 | 75 call divemode_check_for_warnings ; Check for any warnings |
| 0 | 76 |
| 77 ; Tasks only for deco modes | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
78 btfsc show_safety_stop ; Show the safety stop? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
79 call TFT_show_safety_stop ; Yes, show/delete if done. |
| 0 | 80 call calc_deko_divemode ; calculate decompression and display result (any two seconds) |
| 81 bra diveloop_loop1x ; Common Tasks | |
| 82 | |
| 83 diveloop_loop1b: | |
| 84 ; Tasks only for Apnoe mode | |
| 131 | 85 rcall divemode_apnoe_tasks ; 1 sec. Apnoe tasks |
|
134
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
86 call customview_second ; Do every-second tasks for the custom view area |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
87 bra diveloop_loop1x ; Common Tasks |
| 0 | 88 |
| 89 diveloop_loop1x: | |
| 90 ; Common 1sec. tasks for all modes | |
| 131 | 91 rcall timeout_divemode ; dive finished? This routine sets the required flags |
| 92 rcall set_dive_modes ; tests if depth>threshold | |
| 93 rcall set_min_temp ; store min. temp if required | |
| 0 | 94 |
| 95 btfsc store_sample ; store new sample? | |
| 96 call store_dive_data ; Store profile data | |
| 97 | |
| 98 btfss divemode ; Dive finished? | |
| 99 goto ghostwriter_end_dive ; Dive finished! | |
| 100 | |
| 101 btfsc divemode_gaschange ; Gas switch flag set? | |
| 102 rcall gas_switched_common ; Yes | |
| 103 | |
| 104 btfsc toggle_gf ; =1: Toggle GF/aGF | |
| 105 rcall divemodemode_togglegf ; Toggle aGF/GF | |
| 106 | |
| 113 | 107 call compute_ppo2 ; compute mv_sensorX and ppo2_sensorX arrays |
| 108 | |
| 0 | 109 diveloop_loop3: |
| 110 rcall test_switches_divemode ; Check switches in divemode | |
| 111 | |
| 112 global diveloop_loop4 | |
| 113 diveloop_loop4: ; Menu-Exit returns here... | |
| 114 btfsc toggle_customview ; Next view? | |
| 115 call customview_toggle ; Yes, show next customview (and delete this flag) | |
| 116 | |
| 117 btfsc pressure_refresh ; new pressure available? | |
| 118 rcall update_temp_and_or_depth ; Yes, display new depth and clear "pressure_refresh" flag | |
| 119 | |
| 120 btfsc oneminupdate ; one minute tasks | |
| 121 rcall update_divemode60 ; Update clock, etc. | |
| 122 | |
|
239
6c4ad243cb44
CNANGE: aGF pair has same range then normal GF pair
heinrichsweikamp
parents:
220
diff
changeset
|
123 ; btfss quarter_second_update |
|
6c4ad243cb44
CNANGE: aGF pair has same range then normal GF pair
heinrichsweikamp
parents:
220
diff
changeset
|
124 ; bra diveloop_loop4a |
| 83 | 125 |
| 0 | 126 bcf quarter_second_update |
| 127 movlw .6 | |
| 128 cpfseq menupos3 ; in compass view? | |
| 129 bra diveloop_loop4a ; No | |
|
256
5b4ef0b9090d
place compass display code into compass_ops.asm
heinrichsweikamp
parents:
255
diff
changeset
|
130 extern TFT_dive_compass_heading |
| 0 | 131 call TFT_dive_compass_heading ; Yes, update compass heading value |
| 132 diveloop_loop4a: | |
| 133 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 134 bra diveloop_loop5 | |
| 135 bra diveloop_loop6 | |
| 136 diveloop_loop5: | |
| 137 btfss vusb_in ; USB (still) plugged in? | |
| 138 bcf enable_screen_dumps ; No, clear flag | |
| 139 call rs232_get_byte | |
| 140 btfsc rs232_recieve_overflow | |
| 141 bra diveloop_loop6 | |
| 142 movlw "l" | |
| 143 cpfseq RCREG1 | |
| 144 bra diveloop_loop6 | |
| 145 call TFT_dump_screen ; Dump the screen contents | |
| 146 diveloop_loop6: | |
| 147 | |
| 148 bra diveloop_loop ; Loop the divemode | |
| 149 ;-------------------------------------------------------------------------------------------------------- | |
| 150 | |
| 151 | |
| 152 divemode_apnoe_tasks: ; 1 sec. Apnoe tasks | |
|
134
4574aed5cd4c
Show clock in Apnea mode, minor layout changes in Apnea mode
heinrichsweikamp
parents:
131
diff
changeset
|
153 call TFT_display_apnoe_descent ; Yes, Show descent timer |
| 0 | 154 call TFT_max_pressure ; use normal max. depth |
| 155 | |
| 156 btfsc divemode2 ; Time running? | |
| 157 bra divemode_apnoe_tasks2 ; New descent, reset data if flag is set | |
| 158 | |
| 159 rcall apnoe_calc_maxdepth | |
| 160 call TFT_display_apnoe_surface | |
| 161 call TFT_display_apnoe_last_max ; Show last max. depth | |
| 162 incf apnoe_surface_secs,F | |
| 163 movlw d'60' | |
| 164 cpfseq apnoe_surface_secs | |
| 165 bra divemode_apnoe_tasks1 | |
| 166 clrf apnoe_surface_secs | |
| 167 incf apnoe_surface_mins,F | |
| 168 | |
| 169 divemode_apnoe_tasks1: | |
| 170 bcf FLAG_active_descent ; Clear flag | |
| 171 btfsc divemode2 ; Time running? | |
| 172 return ; Yes, return | |
| 173 bsf FLAG_active_descent ; Set Flag | |
| 174 return | |
| 175 | |
| 176 divemode_apnoe_tasks2: | |
| 177 btfss FLAG_active_descent ; Are we descending? | |
| 178 return ; No, We are at the surface | |
| 179 rcall apnoe_calc_maxdepth ; Yes! | |
| 180 call TFT_apnoe_clear_surface ; Clear Surface timer | |
| 181 clrf apnoe_timeout_counter ; Delete timeout | |
| 182 clrf apnoe_surface_secs | |
| 183 clrf apnoe_surface_mins | |
| 184 clrf apnoe_secs | |
| 185 clrf apnoe_mins ; Reset Descent time | |
| 186 movlw .0 | |
| 187 movff WREG,max_pressure+0 | |
| 188 movff WREG,max_pressure+1 ; Reset Max. Depth | |
| 189 bcf FLAG_active_descent ; Clear flag | |
| 190 return | |
| 191 | |
| 192 global apnoe_calc_maxdepth | |
| 193 apnoe_calc_maxdepth: | |
| 194 movff apnoe_max_pressure+0,sub_a+0 | |
| 195 movff apnoe_max_pressure+1,sub_a+1 | |
| 196 movff max_pressure+0,sub_b+0 | |
| 197 movff max_pressure+1,sub_b+1 | |
| 198 call subU16 ; sub_c = sub_a - sub_b | |
| 199 ; apnoe_max_pressure<max_pressure -> neg_flag=1 | |
| 200 ; max_pressure<=apnoe_max_pressure -> neg_flag=0 | |
| 201 btfss neg_flag | |
| 202 return | |
| 203 ;apnoe_max_pressure<max_pressure | |
| 204 movff max_pressure+0,apnoe_max_pressure+0 | |
| 205 movff max_pressure+1,apnoe_max_pressure+1 | |
| 206 return | |
| 207 | |
| 208 | |
| 209 calc_deko_divemode: | |
| 210 btfsc twosecupdate ; two seconds after the last call | |
| 211 bra calc_deko_divemode2 ; Yes, calculate and display deco data ("first second") | |
| 212 | |
| 213 bsf twosecupdate ; No, but next second! | |
| 214 ; Routines used in the "other second" | |
| 215 call calc_average_depth ; calculate average depth | |
| 216 call calc_velocity ; calculate vertical velocity and display if > threshold (every two seconds) | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
217 call set_reset_safety_stop ; Set flags for safety stop and/or reset safety stop |
| 0 | 218 call TFT_debug_output |
| 219 | |
| 220 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 221 return | |
| 222 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 223 return | |
| 224 | |
| 225 ; Calculate CNS | |
| 226 rcall set_actual_ppo2 ; Set char_I_actual_ppO2 | |
| 227 clrf WREG | |
| 228 movff WREG,char_I_step_is_1min ; Make sure to be in 2sec mode. | |
| 229 call deco_calc_CNS_fraction ; calculate CNS | |
| 230 movlb b'00000001' ; rambank 1 selected | |
| 231 | |
| 232 ; Check for a gas change | |
| 233 rcall check_gas_change ; Checks if a better gas should be selected (by user) | |
| 234 | |
| 235 return | |
| 236 | |
| 237 global set_actual_ppo2 | |
| 238 set_actual_ppo2: ; calculate ppO2 in 0.01bar (e.g. 150 = 1.50 bar ppO2) | |
| 111 | 239 btfsc divemode ; in divemode |
| 240 bra set_actual_ppo2_dive ; Yes | |
| 241 ; No, use simulated ambient pressure for char_I_actual_ppO2 | |
| 242 movff char_I_bottom_depth,WREG | |
| 243 mullw .100 | |
| 244 movlw LOW(.1000) | |
| 245 addwf PRODL,W | |
| 246 movwf xA+0 | |
| 247 movlw HIGH(.1000) | |
| 248 addwfc PRODH,W | |
| 249 movwf xA+1 ; P_amb in millibar (1000 = 1.00 bar). | |
| 250 bra set_actual_ppo2_common | |
| 251 set_actual_ppo2_dive: | |
| 0 | 252 SAFE_2BYTE_COPY amb_pressure, xA ; P_amb in millibar (1000 = 1.00 bar). |
| 111 | 253 set_actual_ppo2_common: |
| 113 | 254 movlw d'10' |
| 0 | 255 movwf xB+0 |
| 256 clrf xB+1 | |
| 257 call div16x16 ; xC=p_amb/10 (100 = 1.00 bar). | |
| 258 movff xC+0,xA+0 | |
| 259 movff xC+1,xA+1 | |
| 260 movff char_I_O2_ratio,xB+0 | |
| 261 clrf xB+1 | |
| 262 call mult16x16 ; char_I_O2_ratio * (p_amb/10) | |
| 263 movff xC+0,xA+0 | |
| 264 movff xC+1,xA+1 | |
| 265 movlw d'100' | |
| 266 movwf xB+0 | |
| 267 clrf xB+1 | |
| 268 call div16x16 ; xC=(char_I_O2_ratio * p_amb/10)/100 | |
| 269 | |
| 270 ; Copy ppO2 for CNS calculation | |
| 271 tstfsz xC+1 ; Is ppO2 > 2.55bar ? | |
| 272 setf xC+0 ; yes: bound to 2.55... better than wrap around. | |
| 273 | |
| 274 movff xC+0, char_I_actual_ppO2 ; copy last ppO2 to buffer register | |
| 275 btfsc is_bailout ; In Bailout? | |
| 276 return ; Yes, done. | |
| 277 ; No Bailout, check for ccr mode | |
| 278 btfsc FLAG_ccr_mode ; If FLAG_ccr_mode=1... | |
| 279 movff char_I_const_ppO2, char_I_actual_ppO2 ; ...copy last ppO2 to buffer register | |
| 280 return | |
| 281 | |
| 195 | 282 check_fallback_clear: |
| 283 call check_sensors ; Setups "use_O2_sensorX" flags | |
| 284 ; Copy use flags to voting logic flags in case we are no longer in fallback | |
| 285 btfsc use_O2_sensor1 | |
| 286 bsf voting_logic_sensor1 | |
| 287 btfsc use_O2_sensor2 | |
| 288 bsf voting_logic_sensor2 | |
| 289 btfsc use_O2_sensor3 | |
| 290 bsf voting_logic_sensor3 | |
| 291 rcall divemode_setup_sensor_values ; Setup sensor values | |
| 292 call check_sensors ; Check O2 sensor thresholds for fallback | |
| 293 return | |
| 0 | 294 |
| 295 calc_deko_divemode2: | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
296 bcf twosecupdate |
| 0 | 297 |
| 298 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 299 return | |
| 300 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 301 return | |
| 302 | |
| 303 extern deco_setup_dive | |
| 304 call deco_setup_dive ; Pass all parameters to the C code | |
| 305 | |
| 195 | 306 |
| 307 btfsc setpoint_fallback ; Are we in Fallback? | |
| 308 rcall check_fallback_clear ; Yes, check if we still have fallback condition | |
| 309 | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
310 bcf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
311 |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
312 btfsc FLAG_ccr_mode ; In CCR mode? |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
313 rcall calc_deko_divemode_sensor ; External sensor stuff |
|
152
19ad15f04f60
BUGFIX: Clear Setpoint-Fallback warning when in bailout
heinrichsweikamp
parents:
148
diff
changeset
|
314 |
| 0 | 315 SAFE_2BYTE_COPY amb_pressure,int_I_pres_respiration ; C-code needs the ambient pressure |
| 316 clrf WREG | |
| 317 movff WREG,char_I_step_is_1min ; Force 2 second deco mode | |
| 318 | |
| 319 clrf TMR5L | |
| 320 clrf TMR5H ; 30,51757813µs/bit in TMR5L:TMR5H | |
| 321 call deco_calc_hauptroutine ; calc_tissue | |
| 322 movlb .1 | |
| 323 | |
| 324 movff char_O_deco_status,WREG ; Is a compute cycle finished ? | |
| 325 iorwf WREG,F | |
| 326 btfss STATUS,Z | |
| 327 return ; Return is status <> 0 | |
| 328 | |
| 329 ; Check if deco stops are necessary ? | |
| 330 movff char_O_first_deco_depth,wait_temp ; copy ceiling to temp register | |
| 331 tstfsz wait_temp ; Ceiling<0m? | |
| 332 bra calc_deko_divemode3 ; Yes! | |
| 333 | |
| 334 btfsc decostop_active ; Already in nodeco mode ? | |
| 335 call TFT_display_ndl_mask ; No, Clear deco data, display nostop time | |
| 336 bcf decostop_active ; clear flag (again) | |
| 337 | |
| 338 ; Copy for profile recording | |
| 339 clrf decodata+0 | |
| 340 movff char_O_nullzeit,decodata+1 ; NDL | |
| 341 | |
| 342 call TFT_display_ndl ; display no deco limit | |
| 343 return | |
| 344 | |
| 345 calc_deko_divemode3: | |
| 346 btfss decostop_active ; Already in deco mode ? | |
| 347 call TFT_display_deko_mask ; No, clear nostop time, display decodata | |
| 348 bsf decostop_active ; Set flag (again) | |
| 349 | |
| 350 ; Copy for profile recording | |
| 351 movff char_O_first_deco_depth,decodata+0 ; ceiling | |
| 352 movff char_O_first_deco_time,decodata+1 ; length of first stop in minues | |
| 353 call TFT_display_deko ; display decodata | |
| 354 call TFT_show_TTS_divemode ; display TTS | |
| 355 | |
| 356 movff char_I_extra_time,WREG | |
| 357 tstfsz WREG ; extra time = 0? | |
| 358 bra calc_deko_divemode4 ; No, compute it | |
| 359 return | |
| 360 | |
| 361 calc_deko_divemode4: | |
| 362 ; Check if extra cycles are needed to compute @5 variant: | |
| 363 decfsz apnoe_mins,F ; Reached count-down ? | |
| 364 return ; No: don't compute yet. | |
| 365 | |
| 366 movlw .6 | |
| 367 movff WREG,char_O_deco_status ; Stole next cycles for @5 variant. | |
| 368 | |
| 369 movlw .2 ; Restart countdown. | |
| 370 movwf apnoe_mins | |
| 371 return ; done. | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
372 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
373 calc_deko_divemode_sensor: ; External sensor stuff |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
374 TSTOSS opt_ccr_mode ; =0: Fixed SP, =1: Sensor |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
375 return |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
376 rcall divemode_setup_sensor_values ; Setup sensor values |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
377 call check_sensors ; Check O2 sensor thresholds for fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
378 movff sensor_setpoint,char_I_const_ppO2; Copy sensor result |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
379 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
380 TSTOSS opt_sensor_fallback ; =1: Fallback to SP1 when sensor is lost |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
381 return ; Never fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
382 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
383 btfsc is_bailout ; In bailout? |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
384 return ; Never fallback in bailout |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
385 ; Check if we should fallback to SP1 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
386 btfsc use_O2_sensor1 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
387 return ; At least one sensor is active, no fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
388 btfsc use_O2_sensor2 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
389 return ; At least one sensor is active, no fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
390 btfsc use_O2_sensor3 |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
391 return ; At least one sensor is active, no fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
392 ; No sensor in use -> fallback |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
393 movff char_I_setpoint_cbar+0,char_I_const_ppO2 ; Setup fixed Setpoint (Always fallback to SP1), overwrite sensor result |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
394 bsf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
395 return |
| 0 | 396 |
| 397 ;----------------------------------------------------------------------------- | |
| 398 | |
| 399 divemodemode_togglegf: ; Toggle aGF/GF | |
| 400 bcf toggle_gf ; clear flag | |
| 401 btg use_agf ; Toggle GF | |
| 402 call TFT_gf_mask ; Setup Mask | |
| 403 clrf WREG | |
| 404 movff WREG,char_O_deco_status ; Restart decoplan computation | |
| 405 return | |
| 406 | |
| 193 | 407 global divemode_setup_sensor_values |
| 0 | 408 divemode_setup_sensor_values: |
| 409 ; sum up sensor values (in xA:2) and active sensors in (xB:2) | |
| 410 clrf xB+0 | |
| 411 clrf xB+1 | |
| 412 clrf xA+0 | |
| 413 clrf xA+1 | |
| 192 | 414 btfss use_O2_sensor1 ; Sensor1 active? |
| 415 bra divemode_setup_sensor_values2 ; No | |
| 416 btfss voting_logic_sensor1 ; Sensor within voting logic? | |
| 0 | 417 bra divemode_setup_sensor_values2 ; No |
| 418 movf o2_ppo2_sensor1,W | |
| 419 addwf xA+0 | |
| 420 movlw .0 | |
| 421 addwfc xA+1 ; Add into xA:2 | |
| 422 incf xB+0,F ; Add a sensor | |
| 423 divemode_setup_sensor_values2: | |
| 192 | 424 btfss use_O2_sensor2 ; Sensor2 active? |
| 425 bra divemode_setup_sensor_values3 ; No | |
| 426 btfss voting_logic_sensor2 ; Sensor within voting logic? | |
| 0 | 427 bra divemode_setup_sensor_values3 ; No |
| 428 movf o2_ppo2_sensor2,W | |
| 429 addwf xA+0 | |
| 430 movlw .0 | |
| 431 addwfc xA+1 ; Add into xA:2 | |
| 432 incf xB+0,F ; Add a sensor | |
| 433 divemode_setup_sensor_values3: | |
| 192 | 434 btfss use_O2_sensor3 ; Sensor3 active? |
| 435 bra divemode_setup_sensor_values4 ; No | |
| 436 btfss voting_logic_sensor3 ; Sensor within voting logic? | |
| 0 | 437 bra divemode_setup_sensor_values4 ; No |
| 438 movf o2_ppo2_sensor3,W | |
| 439 addwf xA+0 | |
| 440 movlw .0 | |
| 441 addwfc xA+1 ; Add into xA:2 | |
| 442 incf xB+0,F ; Add a sensor | |
| 443 divemode_setup_sensor_values4: | |
| 444 call div16x16 ; xA/xB=xC with xA+0 as remainder | |
| 445 movff xC+0,sensor_setpoint ; Copy result | |
| 446 return | |
| 447 | |
| 448 calc_velocity: ; called every two seconds | |
| 449 btfss divemode | |
|
307
14719662fb95
Merged Screen layout work #4 into VSItextv2
Janos Kovacs <kovjanos@gmail.com>
parents:
277
diff
changeset
|
450 return ; display velocity only in divemode (Not at the surface after dive) |
| 0 | 451 |
| 452 calc_velocity2: | |
| 453 SAFE_2BYTE_COPY amb_pressure, sub_a | |
| 454 movff last_pressure_velocity+0,sub_b+0 | |
| 455 movff last_pressure_velocity+1,sub_b+1 | |
| 456 movff sub_a+0,last_pressure_velocity+0 ; store old value for velocity | |
| 457 movff sub_a+1,last_pressure_velocity+1 | |
| 458 | |
| 459 call subU16 ; sub_c = amb_pressure - last_pressure | |
| 460 | |
|
318
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
461 bcf neg_flag_velocity |
|
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
462 btfsc neg_flag |
|
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
463 bsf neg_flag_velocity |
|
6d8c82fe5a01
VSIbar #3d: more filter, neg_flag_velocity close to calculation, debug color for descend bar
janos_kovacs <kovjanos@gmail.com>
parents:
315
diff
changeset
|
464 |
| 0 | 465 movff sub_c+0,xA+0 |
| 466 movff sub_c+1,xA+1 | |
| 467 movlw d'39' ; 77 when called every second.... | |
| 468 movwf xB+0 | |
| 469 clrf xB+1 | |
| 470 call mult16x16 ; differential pressure in mbar*77... | |
| 471 movff xC+0,divA+0 | |
| 472 movff xC+1,divA+1 | |
| 473 movlw d'7' | |
| 474 movwf divB+0 | |
| 475 call div16 ; devided by 2^7 equals velocity in m/min | |
| 476 | |
| 477 movlw d'99' | |
| 478 cpfsgt divA+0 ; limit to 99m/min | |
| 479 bra calc_velocity3 | |
| 480 movwf divA+0 ; divA=99 | |
| 481 | |
| 482 calc_velocity3: | |
| 483 call TFT_display_velocity ; With divA+0 = m/min... | |
| 484 return | |
| 485 | |
| 486 | |
| 487 ;============================================================================= | |
| 488 | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
489 set_reset_safety_stop: ; Set flags for safety stop and/or reset safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
490 TSTOSS opt_enable_safetystop ; =1: A safety stop is shown |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
491 bra delete_safety_stop ; No, don't show safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
492 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
493 btfsc decostop_active ; Is a deco stop displayed? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
494 bra delete_safety_stop ; Yes, don't show safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
495 ; Below "safety_stop_reset"? Set flag and reset count-down timer |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
496 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
497 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
498 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
499 movff hi,sub_a+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
500 movlw LOW safety_stop_reset |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
501 movwf sub_b+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
502 movlw HIGH safety_stop_reset |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
503 movwf sub_b+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
504 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
505 btfss neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
506 bra reset_safety_stop ; Below 10m, reset safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
507 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
508 ; Above "safety_stop_end"? Clear flag. |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
509 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
510 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
511 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
512 movff hi,sub_a+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
513 movlw LOW safety_stop_end |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
514 movwf sub_b+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
515 movlw HIGH safety_stop_end |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
516 movwf sub_b+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
517 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
518 btfsc neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
519 bra delete_safety_stop ; Above 3m, remove safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
520 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
521 ; Above "safety_stop_start"? Activate safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
522 SAFE_2BYTE_COPY rel_pressure, lo |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
523 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
524 movff lo,sub_a+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
525 movff hi,sub_a+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
526 movlw LOW safety_stop_start |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
527 movwf sub_b+0 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
528 movlw HIGH safety_stop_start |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
529 movwf sub_b+1 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
530 call subU16 ; sub_c = sub_a - sub_b |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
531 btfsc neg_flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
532 bra acivate_safety_stop ; Above 5m, activate safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
533 bra reset_safety_stop2 ; Pause safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
534 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
535 acivate_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
536 tstfsz safety_stop_countdown ; Countdown at zero? |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
537 bsf show_safety_stop ; No, Set flag! |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
538 return |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
539 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
540 delete_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
541 clrf safety_stop_countdown ; reset timer |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
542 bra reset_safety_stop2 ; Remove safety stop from display |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
543 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
544 reset_safety_stop: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
545 movlw safety_stop_length ;[s] |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
546 movwf safety_stop_countdown ; reset timer |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
547 reset_safety_stop2: |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
548 bcf show_safety_stop ; Clear flag |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
549 btfss safety_stop_active ; Safety stop shown |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
550 return ; No, don't delete it |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
551 bcf safety_stop_active ; Clear flag |
| 131 | 552 call TFT_clear_safety_stop ; Clear safety stop |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
553 return |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
554 |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
555 ;============================================================================= |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
556 |
| 0 | 557 timeout_menuview: |
| 558 decfsz timeout_counter3,F ; timeout for menuview | |
| 559 return ; No timeout, return | |
| 560 ; Timeout, clear e.g. "Menu?" | |
| 561 goto menuview_toggle_reset ; "returns" | |
| 562 | |
| 563 timeout_divemode_menu: | |
| 564 decfsz timeout_counter3,F ; timeout for divemode menu | |
| 565 return | |
| 566 | |
| 567 global timeout_divemode_menu2 | |
| 568 timeout_divemode_menu2: ; Called from divemenu_tree.asm | |
| 569 bcf divemode_menu ; Timeout! Clear flag | |
| 570 call TFT_clear_divemode_menu ; Clear menu | |
| 571 call TFT_active_gas_divemode ; Redraw gas/setpoint/diluent | |
| 572 bcf blinking_better_gas ; Clear flag to have temperature updated once | |
| 573 call TFT_temp_divemode ; Displays temperature | |
|
315
4f83470dcece
VSIbar #3: remaining changes for the split style bar
Janos Kovacs <kovjanos@gmail.com>
parents:
310
diff
changeset
|
574 call TFT_draw_gassep_line ; Gas separator grid in spec mode only |
| 0 | 575 |
| 576 btfss decostop_active ; In deco mode ? | |
| 577 bra timeout_divemode_menu_ndl ; No, show NDL again | |
| 578 ; Show deco | |
| 579 call TFT_display_deko_mask ; clear nostop time, display decodata | |
| 580 call TFT_display_deko | |
| 581 call TFT_show_TTS_divemode | |
| 582 return | |
| 583 timeout_divemode_menu_ndl: ; Show NDL | |
| 584 call TFT_display_ndl_mask ; Clear deco data, display nostop time | |
| 585 call TFT_display_ndl | |
| 586 return | |
| 587 | |
| 588 timeout_divemode: | |
| 589 btfsc divemode_menu ; Divemode menu active? | |
| 590 rcall timeout_divemode_menu ; Yes, check the timeout for it... | |
| 591 | |
| 592 btfsc menuview ; is a menuview shown? | |
| 593 rcall timeout_menuview ; Yes, check the timeout for it... | |
| 594 | |
| 595 btfss realdive ; Dive longer then one minute | |
| 596 return | |
| 597 | |
| 598 btfsc FLAG_apnoe_mode ; In Apnoe mode? | |
|
35
eca4a201d8cf
change apnea timeout, do no longer store apnea dives in logbook
heinrichsweikamp
parents:
23
diff
changeset
|
599 bra timeout_divemode2 ; Yes, use apnoe_timeout [min] for timeout |
| 0 | 600 |
| 601 ifndef __DEBUG | |
| 602 btfsc simulatormode_active ; In Simulator mode? | |
| 603 bra timeout_divemode3 ; Yes, use simulator timeout | |
| 604 endif | |
| 605 | |
| 606 bcf divemode | |
| 148 | 607 infsnz timeout_counter,F |
| 608 incf timeout_counter2,F ; timeout is 15bits | |
| 0 | 609 |
| 610 movlw LOW divemode_timeout | |
| 611 movwf sub_a+0 | |
| 612 movlw HIGH divemode_timeout | |
| 613 movwf sub_a+1 | |
| 614 | |
| 615 movff timeout_counter, sub_b+0 | |
| 616 movff timeout_counter2, sub_b+1 | |
| 617 call subU16 ; sub_c = sub_a - sub_b | |
| 618 btfss neg_flag ; Result negative? | |
| 619 bsf divemode ; No, set flag | |
| 620 return | |
| 621 | |
| 622 timeout_divemode2: | |
| 623 incf timeout_counter,F ; seconds... | |
| 624 movlw d'60' | |
| 625 cpfseq timeout_counter ; timeout_counter=60? | |
| 626 return ; No. | |
| 627 ; One minute timeout done. | |
| 628 clrf timeout_counter | |
| 629 bcf divemode | |
| 630 incf apnoe_timeout_counter,F | |
| 631 movlw apnoe_timeout ; apnoe timeout [min] | |
| 632 cpfseq apnoe_timeout_counter | |
| 633 bsf divemode | |
| 634 return | |
| 635 | |
| 636 timeout_divemode3: | |
| 637 bcf divemode | |
| 638 incf timeout_counter,F | |
| 639 movlw simulator_timeout ; simulator timeout | |
| 640 cpfsgt timeout_counter | |
| 641 bsf divemode | |
| 642 return | |
| 643 | |
| 644 update_temp_and_or_depth: ; New sensor data arrived... | |
| 645 btfsc temp_changed | |
| 646 call TFT_temp_divemode ; Displays temperature | |
| 647 | |
| 648 btfsc pressure_refresh | |
| 649 call TFT_depth ; Displays new depth | |
| 650 | |
| 651 rcall set_max_depth ; update max. depth if required | |
| 652 bcf pressure_refresh ; until new pressure is available | |
| 653 return | |
| 654 | |
| 655 update_divemode60: ; update any minute | |
| 656 call get_battery_voltage ; gets battery voltage | |
| 218 | 657 rcall set_powersafe ; Battery low? |
| 0 | 658 call TFT_max_pressure ; Update max. depth |
| 659 call customview_minute ; Do every-minute tasks for the custom view area | |
| 660 bcf oneminupdate | |
| 661 | |
| 662 btfss simulatormode_active ; in simulator mode? | |
| 663 return ; No | |
| 664 ; Yes, quite dive mode simulation after 21*256s=89min:36s | |
| 665 movlw .20 | |
| 666 cpfsgt total_divetime_seconds+1 ; Timeout? | |
| 667 return ; No | |
| 668 ifdef __DEBUG | |
| 669 return ; No simulator timeout in debug mode | |
| 670 endif | |
| 671 bra divemode_option1 ; Yes, set to 0m and "return" | |
| 672 | |
| 673 set_max_depth: | |
| 674 movff max_pressure+0,sub_a+0 | |
| 675 movff max_pressure+1,sub_a+1 | |
| 676 SAFE_2BYTE_COPY rel_pressure, sub_b | |
| 677 call subU16 ; sub_c = sub_a - sub_b | |
| 678 ; max_pressure<rel_pressure -> neg_flag=1 | |
| 679 ; rel_pressure<=max_pressure -> neg_flag=0 | |
| 680 btfss neg_flag | |
| 681 return | |
| 682 ; max_pressure<rel_pressure | |
| 683 movff sub_b+0,max_pressure+0 | |
| 684 movff sub_b+1,max_pressure+1 | |
| 685 call TFT_max_pressure ; No, use normal max. depth | |
| 686 return | |
| 687 | |
| 688 set_min_temp: | |
| 689 movff minimum_temperature+0,sub_a+0 | |
| 690 movff minimum_temperature+1,sub_a+1 | |
| 691 SAFE_2BYTE_COPY temperature,sub_b | |
| 692 call sub16 ; sub_c = sub_a - sub_b | |
| 693 ; minimum_temperature<T -> neg_flag=1 | |
| 694 ; T<=minimum_temperature -> neg_flag=0 | |
| 695 btfsc neg_flag | |
| 696 return | |
| 697 ; minimum_temperature>=T | |
| 698 movff sub_b+0,minimum_temperature+0 | |
| 699 movff sub_b+1,minimum_temperature+1 | |
| 700 return | |
| 701 | |
| 702 global set_dive_modes | |
| 703 set_dive_modes: | |
| 704 btfsc high_altitude_mode ; In high altitude (Fly) mode? | |
| 705 bra set_dive_modes3 ; Yes! | |
| 706 | |
| 707 set_dive_modes0: | |
| 708 movlw LOW start_dive_threshold | |
| 709 movwf sub_a+0 ; dive_treshold is in cm | |
| 710 movlw HIGH start_dive_threshold | |
| 711 movwf sub_a+1 ; dive_treshold is in cm | |
| 712 | |
| 713 set_dive_modes1: | |
| 714 SAFE_2BYTE_COPY rel_pressure, sub_b | |
| 715 call subU16 ; sub_c = sub_a - sub_b | |
| 716 | |
| 717 btfss neg_flag | |
| 718 bra set_dive_modes2 ; too shallow (rel_pressure<dive_threshold) | |
| 719 | |
| 720 btfsc realdive ; Dive longer than one minute? | |
| 721 clrf timeout_counter ; Yes, reset timout counter | |
| 722 | |
| 723 bsf divemode ; (Re-)Set divemode flag | |
| 724 bsf divemode2 ; displayed divetime is running | |
| 725 return | |
| 726 | |
| 727 set_dive_modes2: | |
| 728 bcf divemode2 ; Stop time | |
| 729 btfss realdive ; dive longer then one minute? | |
| 730 bcf divemode ; no -> this was no real dive | |
| 731 return ; No, return | |
| 732 | |
| 733 | |
| 734 set_dive_modes3: ; High-altitude mode | |
| 735 btfsc realdive ; dive longer then one minute? | |
| 736 bra set_dive_modes0 ; Yes -> this is a real dive -> Use start_dive_threshold or ascend | |
| 737 | |
| 738 movlw HIGH high_altitude_dive_threshold | |
| 739 movwf sub_a+1 | |
| 740 movlw LOW high_altitude_dive_threshold | |
| 741 movwf sub_a+0 | |
| 742 bra set_dive_modes1 | |
| 743 | |
| 744 set_powersafe: | |
| 745 movlw color_code_battery_low+1; [%] | |
| 746 cpfslt batt_percent | |
| 747 return | |
| 748 | |
| 749 movlw d'7' ; Type of Alarm (Battery Low) | |
| 750 movwf AlarmType ; Copy to Alarm Register | |
| 751 bsf event_occured ; Set Event Flag | |
| 752 movlw .0 | |
| 753 movff WREG,opt_brightness ; Set Brightness to ECO | |
| 754 return ; return | |
| 755 | |
| 756 calc_average_depth: | |
| 176 | 757 btfsc reset_average_depth ; Reset the Average depth? |
| 0 | 758 rcall reset_average1 ; Reset the resettable average depth |
| 759 | |
| 760 ; 1. Add new 2xdepth to the Sum of depths registers | |
| 761 SAFE_2BYTE_COPY rel_pressure, xB ; Buffer... | |
| 762 bcf STATUS,C | |
| 763 rlcf xB+0,F | |
| 764 rlcf xB+1,F ; x2 | |
| 765 | |
| 766 movf xB+0,w | |
| 767 addwf average_depth_hold+0,F | |
| 768 movf xB+1,w | |
| 769 addwfc average_depth_hold+1,F | |
| 770 movlw d'0' | |
| 771 addwfc average_depth_hold+2,F | |
| 772 addwfc average_depth_hold+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 773 | |
| 774 ; Do the same for the _total registers (Non-Resettable) | |
| 775 movf xB+0,w | |
| 776 addwf average_depth_hold_total+0,F | |
| 777 movf xB+1,w | |
| 778 addwfc average_depth_hold_total+1,F | |
| 779 movlw d'0' | |
| 780 addwfc average_depth_hold_total+2,F | |
| 781 addwfc average_depth_hold_total+3,F ; Will work up to 9999mbar*60*60*24=863913600mbar | |
| 782 | |
| 783 ; 2. Compute Average Depth on base of average_divesecs:2 | |
| 784 movff average_divesecs+0,xB+0 | |
| 785 movff average_divesecs+1,xB+1 ; Copy | |
| 786 movff average_depth_hold+0,xC+0 | |
| 787 movff average_depth_hold+1,xC+1 | |
| 788 movff average_depth_hold+2,xC+2 | |
| 789 movff average_depth_hold+3,xC+3 | |
| 790 | |
| 791 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder | |
| 792 movff xC+0,avr_rel_pressure+0 | |
| 793 movff xC+1,avr_rel_pressure+1 | |
| 794 | |
|
89
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
795 btfss divemode2 ; displayed divetime is running? |
|
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
796 return ; No (e.g. too shallow) |
|
c34516c99ca8
BUGFIX: No average depth for end-of-dive portion (<1m)
heinrichsweikamp
parents:
86
diff
changeset
|
797 |
| 0 | 798 ; 3. Compute Total Average Depth on base of total_divetime_seconds:2 |
| 799 movff total_divetime_seconds+0,xB+0 | |
| 800 movff total_divetime_seconds+1,xB+1 ; Copy | |
| 801 movff average_depth_hold_total+0,xC+0 | |
| 802 movff average_depth_hold_total+1,xC+1 | |
| 803 movff average_depth_hold_total+2,xC+2 | |
| 804 movff average_depth_hold_total+3,xC+3 | |
| 805 call div32x16 ; xC:4 / xB:2 = xC+3:xC+2 with xC+1:xC+0 as remainder | |
| 806 movff xC+0,avr_rel_pressure_total+0 | |
| 807 movff xC+1,avr_rel_pressure_total+1 | |
| 808 return | |
| 809 | |
| 810 reset_average1: | |
| 811 clrf average_depth_hold+0 | |
| 812 clrf average_depth_hold+1 | |
| 813 clrf average_depth_hold+2 | |
| 814 clrf average_depth_hold+3 ; Clear average depth register | |
| 815 movlw d'2' | |
| 816 movwf average_divesecs+0 | |
| 817 clrf average_divesecs+1 | |
| 818 bcf reset_average_depth ; Clear flag | |
| 819 return | |
| 820 | |
| 821 test_switches_divemode: ; checks switches in divemode | |
| 822 btfsc divemode_menu ; Divemode menu shown? | |
| 823 bra test_switches_divemode_menu ; Yes, use menu processor | |
| 824 btfsc switch_left | |
| 825 bra test_switches_divemode2 ; Enter button pressed, check if we need to do something | |
| 826 btfss switch_right | |
| 827 return ; No button press | |
| 828 tstfsz menupos2 ; any option shown? | |
| 829 bra test_switches_divemode1 ; Yes, do option tasks | |
| 830 bsf toggle_customview ; No, toggle custom view | |
| 831 return | |
| 832 | |
| 833 test_switches_divemode_menu: | |
| 834 btfsc switch_left | |
| 835 bra test_switches_divemode_menu2 ; Move cursor | |
| 836 btfsc switch_right | |
| 837 bra test_switches_divemode_menu3 ; Enter submenu or do something | |
| 838 return ; No button press | |
| 839 | |
| 840 test_switches_divemode_menu1: | |
| 841 clrf menupos | |
| 842 test_switches_divemode_menu2: | |
| 843 incf menupos,F | |
| 844 incf menupos4,W ; menupos4+1 -> WREG | |
| 845 cpfslt menupos ; >menupos4 (Set in menu_processor.asm)? | |
| 846 bra test_switches_divemode_menu1; > Yes, set to 1 | |
| 847 call TFT_divemode_menu_cursor ; Update the cursor | |
| 848 bcf switch_left | |
| 849 movlw divemode_menu_timeout ; Reload timeout | |
| 850 movwf timeout_counter3 ; timeout for divemode menu | |
| 851 return | |
| 852 | |
| 853 test_switches_divemode_menu3: ; Enter submenu or do something | |
| 854 bcf switch_right | |
| 855 ; decf menupos,F ; menu_processor needs 0-5... | |
| 856 extern do_line_menu | |
| 857 goto do_line_menu ; Warning! Trashes STKPTR and returns to diveloop_loop4: | |
| 858 | |
| 859 test_switches_divemode1: | |
| 860 bcf switch_right | |
| 861 movlw divemode_menuview_timeout | |
| 862 movwf timeout_counter3 ; Reload timeout | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
863 movff menupos2,WREG ; menupos2 holds number of customview/divemode menu function |
| 0 | 864 dcfsnz WREG,F |
| 137 | 865 bra divemode_option_gaschange ; Switch to the indicated "better gas" |
| 866 dcfsnz WREG,F | |
| 0 | 867 bra divemode_option0 ; Start/Setup Divemode menu |
| 868 dcfsnz WREG,F | |
| 869 bra divemode_option1 ; Quit Simulation? | |
| 870 dcfsnz WREG,F | |
| 871 bra divemode_option2 ; Descent 1m | |
| 872 dcfsnz WREG,F | |
| 873 bra divemode_option3 ; Ascend 1m | |
| 874 dcfsnz WREG,F | |
| 875 bra divemode_option4 ; Quit Apnoe mode | |
| 876 dcfsnz WREG,F | |
| 877 bra divemode_option5 ; Reset Stopwatch (In Gauge mode) | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
878 dcfsnz WREG,F |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
879 bra divemode_option6 ; +5mins simulation |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
880 dcfsnz WREG,F |
|
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
881 bra divemode_option7 ; Store heading |
| 0 | 882 return |
| 883 | |
| 884 test_switches_divemode2: | |
| 885 call menuview_toggle ; Menu or Simulator tasks | |
| 886 return | |
| 887 | |
| 888 gas_switched_common: | |
|
99
87cc1adfe4da
show event "bailout" in the internal logbook
heinrichsweikamp
parents:
98
diff
changeset
|
889 bcf divemode_gaschange ; Clear flag |
|
87cc1adfe4da
show event "bailout" in the internal logbook
heinrichsweikamp
parents:
98
diff
changeset
|
890 |
|
274
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
891 tstfsz menupos ; menupos=0? |
|
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
892 bra $+4 ; No |
|
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
893 return ; Yes, do not switch gas (There is no Gas #0 !) |
|
9347893b74ce
BUGFIX: Fast Gas change near the ppO2 limit could cause switching to a non-available Gas #0
heinrichsweikamp
parents:
256
diff
changeset
|
894 |
| 0 | 895 decf menupos,W ; 1-5 -> 0-4 |
| 896 btfss FLAG_ccr_mode ; Choose OC Gases | |
| 897 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 898 btfsc FLAG_ccr_mode ; Choose CC Diluents | |
| 899 rcall setup_dil_registers ; With WREG=Gas 0-4 | |
| 900 | |
| 901 decf menupos,W ; 1-5 -> 0-4 | |
| 902 btfsc is_bailout ; Choose OC Bailouts (OC Gases) | |
| 903 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 904 | |
| 905 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 906 clrf WREG | |
| 907 movff WREG,char_O_deco_status ; Restart decoplan computation | |
| 98 | 908 |
| 909 ; Set flags for profile recording | |
| 910 bsf event_occured ; Set global event byte | |
| 911 btfsc is_bailout ; Choose OC Bailouts (OC Gases) | |
| 912 bsf bailoutgas_event ; Bailout gas change | |
| 913 btfss is_bailout ; Choose OC Bailouts (OC Gases) | |
| 914 bsf stored_gas_changed ; OC gas change | |
| 0 | 915 return |
| 916 | |
| 917 global setup_gas_registers | |
| 918 setup_gas_registers: ; With WREG=Gas 0-4 | |
| 919 lfsr FSR1,opt_gas_O2_ratio+0 | |
| 920 movff PLUSW1,char_I_O2_ratio ; O2 (For ppO2 calculations) | |
| 921 lfsr FSR1,opt_gas_He_ratio+0 | |
| 922 movff PLUSW1,char_I_He_ratio ; He | |
| 923 incf WREG,W ; Gas# 1-5 | |
| 924 movff WREG,char_I_current_gas ; Set gas | |
| 925 movff WREG,active_gas ; Set for logbook and display | |
| 926 banksel char_I_O2_ratio | |
| 927 movf char_I_O2_ratio,W ; Add O2... | |
| 928 addwf char_I_He_ratio,W ; ...and He... | |
| 929 sublw .100 ; ...subtract both from 100 | |
| 930 movwf char_I_N2_ratio ; -> N2! | |
| 931 banksel common | |
| 932 return | |
| 933 | |
| 934 global setup_dil_registers | |
| 935 setup_dil_registers: ; With WREG=dil 0-4 | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
936 btfsc is_bailout |
|
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
937 return ; Ignore in bailout |
| 0 | 938 lfsr FSR1,opt_dil_O2_ratio+0 |
| 939 movff PLUSW1,char_I_O2_ratio ; O2 (For ppO2 calculations) | |
| 940 lfsr FSR1,opt_dil_He_ratio+0 | |
| 941 movff PLUSW1,char_I_He_ratio ; He | |
| 942 incf WREG,W ; Gas# 1-5 | |
| 943 movff WREG,char_I_current_gas ; Set gas | |
| 944 movff WREG,active_gas ; Set for logbook and display | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
945 movff WREG,active_diluent ; As a backup when switching back from Bailout to CCR |
| 0 | 946 banksel char_I_O2_ratio |
| 947 movf char_I_O2_ratio,W ; Add O2... | |
| 948 addwf char_I_He_ratio,W ; ...and He... | |
| 949 sublw .100 ; ...subtract both from 100 | |
| 950 movwf char_I_N2_ratio ; -> N2! | |
| 951 banksel common | |
| 952 return | |
| 953 | |
| 137 | 954 divemode_option_gaschange: ; Switch to the better gas |
| 955 movff better_gas_number,menupos; 1-5 | |
| 956 bsf divemode_gaschange ; Change the gas in the dive mode loop... | |
| 957 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
|
138
2852b0bd6391
minor: some extra protection against wrong gas selection
heinrichsweikamp
parents:
137
diff
changeset
|
958 bcf better_gas_available ; Clear flag immediately |
| 137 | 959 return |
| 960 | |
| 0 | 961 divemode_option0: ; Start/Setup Divemode menu |
| 962 call TFT_clear_divemode_menu ; Clear menu area | |
| 963 bcf menuview | |
| 964 extern do_main_divemenu | |
| 965 call do_main_divemenu | |
| 966 global divemode_option0_return | |
| 967 divemode_option0_return: | |
| 968 ; movlw .1 | |
| 969 ; movwf menupos ; Set to first option in divemode menu | |
| 970 call TFT_divemode_menu_cursor; Show the cursor | |
| 971 movlw divemode_menu_timeout | |
| 972 movwf timeout_counter3 ; timeout for divemode menu | |
| 973 bsf divemode_menu ; Set flag | |
| 974 clrf menupos2 ; Clear option counter | |
| 975 bra diveloop_loop4 ; Goto back to diveloop (Menuprocessor trashes STKPTR!) | |
| 976 | |
| 977 divemode_option4: | |
| 978 movlw d'58' ; two seconds left | |
| 979 movwf timeout_counter | |
| 980 movlw apnoe_timeout-1 ; apnoe timeout [min] | |
| 981 movwf apnoe_timeout_counter | |
| 982 btfss simulatormode_active ; in simulator mode? | |
| 983 return ; No | |
| 984 divemode_option1: ; Quit simulation mode | |
| 985 banksel isr_backup | |
| 986 movlw low .1000 | |
| 987 movwf sim_pressure+0 | |
| 988 movlw high .1000 | |
| 989 movwf sim_pressure+1 ; Set to 0m -> End of Dive | |
| 990 banksel common | |
| 991 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
| 992 | |
| 993 btfss FLAG_apnoe_mode ; In Apnoe mode? | |
| 994 return ; No | |
| 995 movlw d'58' ; two seconds left | |
| 996 movwf timeout_counter | |
| 997 movlw apnoe_timeout-1 ; apnoe timeout [min] | |
| 998 movwf apnoe_timeout_counter | |
| 999 return | |
| 1000 | |
| 1001 divemode_option3: ; minus 1m | |
| 1002 banksel isr_backup | |
|
315
4f83470dcece
VSIbar #3: remaining changes for the split style bar
Janos Kovacs <kovjanos@gmail.com>
parents:
310
diff
changeset
|
1003 movlw d'100' |
| 0 | 1004 subwf sim_pressure+0 |
| 1005 movlw .0 | |
| 1006 subwfb sim_pressure+1 | |
| 1007 rcall divemode_simulator_check_limits | |
| 1008 banksel common | |
| 1009 return | |
| 1010 | |
| 1011 divemode_option2: ; plus 1m | |
| 1012 banksel isr_backup | |
|
315
4f83470dcece
VSIbar #3: remaining changes for the split style bar
Janos Kovacs <kovjanos@gmail.com>
parents:
310
diff
changeset
|
1013 movlw d'100' |
| 0 | 1014 addwf sim_pressure+0 |
| 1015 movlw .0 | |
| 1016 addwfc sim_pressure+1 | |
| 1017 rcall divemode_simulator_check_limits | |
| 1018 banksel common | |
| 1019 return | |
| 1020 | |
| 1021 divemode_option5: | |
| 1022 call menuview_toggle_reset ; Reset to zero (Zero=no menuview) | |
| 1023 bsf reset_average_depth ; Set Flag | |
| 1024 return | |
| 1025 | |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1026 divemode_option6: |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1027 bcf divemode2 ; Stop divetime |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1028 movlw .5 |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1029 addwf divemins+0,F |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1030 movlw .0 |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1031 addwfc divemins+1,F ; Add 5 mins |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1032 movlw .5 |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1033 movwf up ; counter |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1034 ; 1min mode |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1035 divemode_option6_2: |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1036 movlw .1 |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1037 movff WREG,char_I_step_is_1min ; Force 1min mode |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1038 clrf TMR5L |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1039 clrf TMR5H ; 30,51757813µs/bit in TMR5L:TMR5H |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1040 call deco_calc_hauptroutine ; calc_tissue |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1041 movlb .1 |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1042 decfsz up,F ; Done? |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1043 bra divemode_option6_2 ; Not yet |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1044 bsf divemode2 ; continue divetime |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1045 call menuview_toggle_reset |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1046 return |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1047 |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1048 divemode_option7: |
|
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1049 ; Store heading for compass view |
| 255 | 1050 movff compass_heading_shown+0,compass_bearing+0 |
| 1051 movff compass_heading_shown+1,compass_bearing+1 | |
| 1052 bsf compass_bearing_set ; set flag | |
|
254
5fe7aff622f3
preparations to set a course for the compass display
heinrichsweikamp
parents:
239
diff
changeset
|
1053 call menuview_toggle_reset ; Done. |
|
216
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1054 return |
|
973a0969e0ac
NEW: On-board simulator can increase divetime in 5min steps
heinrichsweikamp
parents:
206
diff
changeset
|
1055 |
| 0 | 1056 divemode_simulator_check_limits: |
| 1057 ; Check limits (150m and 0m) | |
| 1058 movlw LOW d'16000' ; Compare to 16bar=16000mbar (150m). | |
| 1059 subwf sim_pressure+0,W | |
| 1060 movlw HIGH d'16000' | |
| 1061 subwfb sim_pressure+1,W | |
| 1062 bnc divemode_simulator_check_limits2 ; No-carry = borrow = not deeper | |
| 1063 | |
| 1064 ; Too deep, limit to 150m | |
| 1065 movlw LOW d'16000' | |
| 1066 movwf sim_pressure+0 | |
| 1067 movlw HIGH d'16000' | |
| 1068 movwf sim_pressure+1 | |
| 1069 return | |
| 1070 divemode_simulator_check_limits2: | |
| 1071 movlw LOW d'1000' ; Compare to 1bar == 0m == 1000 mbar. | |
| 1072 subwf sim_pressure+0,W | |
| 1073 movlw HIGH d'1000' | |
| 1074 subwfb sim_pressure+1,W | |
| 1075 btfsc STATUS,C ; No-carry = borrow = not deeper. | |
| 1076 return ; Deeper than 0m == Ok. | |
| 1077 ; Too shallow, limit to 0m | |
| 1078 movlw LOW d'1000' | |
| 1079 movwf sim_pressure+0 | |
| 1080 movlw HIGH d'1000' | |
| 1081 movwf sim_pressure+1 | |
| 1082 return | |
| 1083 | |
| 1084 ;============================================================================= | |
| 1085 ; Compare all enabled gas in list, to see if a better one is available. | |
| 1086 ; | |
| 1087 ; Output: better_gas_available, better_gas_number | |
| 1088 ; | |
| 1089 check_gas_change: ; Checks if a better gas should be selected (by user) | |
| 1090 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1091 clrf better_gas_number ; Clear better gas register | |
| 1092 | |
| 1093 SAFE_2BYTE_COPY rel_pressure,xA | |
| 1094 movlw d'100' | |
| 1095 movwf xB+0 | |
| 1096 clrf xB+1 | |
| 1097 call div16x16 ; compute depth in full m -> result in xC+0 | |
| 1098 | |
| 1099 btfss FLAG_ccr_mode ; In CCR mode... | |
| 1100 bra check_gas_change_OC_bail; No, check for OC or bailout | |
| 1101 btfsc is_bailout ; Bailout? | |
| 1102 bra check_gas_change_OC_bail; Yes, check for OC or bailout | |
| 1103 | |
| 1104 ; Check Diluents | |
|
160
99ac325586ce
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
heinrichsweikamp
parents:
152
diff
changeset
|
1105 bsf ccr_diluent_setup ; in CCR menus |
| 0 | 1106 movlw .0 |
| 1107 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1108 movlw .1 | |
| 1109 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1110 movlw .2 | |
| 1111 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1112 movlw .3 | |
| 1113 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1114 movlw .4 | |
| 1115 rcall check_dil_common ; With Gas 0-4 in WREG | |
| 1116 bra check_gas_change_exit | |
| 1117 | |
| 1118 check_gas_change_OC_bail: | |
|
160
99ac325586ce
BUGFIX: Fast diluent (w/o dive mode menu) change did not work correctly
heinrichsweikamp
parents:
152
diff
changeset
|
1119 bcf ccr_diluent_setup ; in OC menus |
| 0 | 1120 movlw .0 |
| 1121 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1122 movlw .1 | |
| 1123 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1124 movlw .2 | |
| 1125 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1126 movlw .3 | |
| 1127 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1128 movlw .4 | |
| 1129 rcall check_gas_common ; With Gas 0-4 in WREG | |
| 1130 ; bra check_gas_change_exit | |
| 1131 check_gas_change_exit: | |
| 1132 btfss better_gas_available ; Is a better gas available | |
| 1133 bcf blinking_better_gas ; No, Clear blinking flag | |
| 1134 btfss better_gas_available ; Is a better gas available | |
| 1135 clrf better_gas_number ; No, Clear better_gas_number (For gaslist display) | |
| 1136 call TFT_active_gas_divemode ; Display gas/Setpoint | |
| 1137 return | |
| 1138 | |
| 1139 check_gas_common: ; With Gas 0-4 in WREG | |
| 1140 btfsc better_gas_available ; Better Gas already found? | |
| 1141 return ; Yes, return | |
| 1142 lfsr FSR1,opt_gas_type ; 0=Disabled, 1=First, 2=Travel, 3=Deco | |
| 1143 btfss PLUSW1,0 ; Test for Bit0 and 1 -> type=3 -> Deco | |
| 1144 return ; No | |
| 1145 btfss PLUSW1,1 ; Test for Bit0 and 1 -> type=3 -> Deco | |
| 1146 return ; No | |
| 1147 incf WREG,W ; 1-5 | |
| 1148 cpfseq active_gas ; is this gas currently selected? | |
| 1149 bra check_gas_common2 ; No | |
| 1150 return ; Yes, skip test for active gas | |
| 1151 check_gas_common2: | |
| 1152 decf WREG,W ; 0-4 | |
| 1153 movwf hi ; Save tested gas 0-4 | |
|
97
53a99a2dc6a1
CHANGE: Always compute bailout plan based on all active gases
heinrichsweikamp
parents:
89
diff
changeset
|
1154 lfsr FSR1,opt_OC_bail_gas_change |
| 0 | 1155 movff PLUSW1,lo ; Change depth into lo |
| 1156 movlw minimum_change_depth | |
| 1157 cpfsgt lo ; Change depth>minimum_change_depth? | |
| 1158 return ; No, Change depth not deep enough, skip! | |
| 1159 movf xC+0,W ; load depth in m into WREG | |
| 1160 cpfsgt lo ; gas_change_depth < current depth? | |
| 69 | 1161 bra check_gas_common3 ; No, check if we are within the better_gas_window_pos window |
| 1162 incf hi,W ; 1-5 | |
| 1163 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 1164 movlw better_gas_window_neg | |
| 1165 subwf lo,W ; Change depth-better_gas_window_neg | |
| 1166 cpfslt xC+0 ; current depth<Change depth-better_gas_window_neg? | |
| 1167 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1168 return | |
| 1169 | |
| 1170 check_gas_common3: | |
| 0 | 1171 incf hi,W ; 1-5 |
| 1172 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 69 | 1173 movlw better_gas_window_pos |
| 1174 addwf lo,W ; Change depth+better_gas_window_pos | |
| 1175 cpfsgt xC+0 ; current depth>Change depth+better_gas_window_pos? | |
| 1176 bra check_gas_common4 ; Ok, now check the better gas ppO2<opt_ppO2_max | |
| 1177 return | |
| 1178 | |
| 1179 check_gas_common4: | |
| 1180 movf hi,W ; 0-4 | |
| 1181 lfsr FSR1,char_I_deco_N2_ratio | |
| 1182 movff PLUSW1,lo ; N2 ratio into lo | |
| 1183 lfsr FSR1,char_I_deco_He_ratio | |
| 1184 movff PLUSW1,xB+0 ; He ratio into xB+0 | |
| 1185 movf xB+0,W | |
| 1186 addwf lo,F | |
| 1187 movlw .101 | |
| 1188 bcf STATUS,C | |
| 1189 subfwb lo,F ; O2 ratio in lo | |
| 1190 | |
| 1191 SAFE_2BYTE_COPY amb_pressure, xA | |
| 1192 movlw d'10' | |
| 1193 movwf xB+0 | |
| 1194 clrf xB+1 | |
| 1195 call div16x16 ; xC=p_amb/10 | |
| 1196 movff xC+0,xA+0 | |
| 1197 movff xC+1,xA+1 | |
| 1198 movff lo,xB+0 ; =O2 ratio | |
| 1199 clrf xB+1 | |
| 1200 call mult16x16 ; lo * p_amb/10 | |
| 1201 | |
| 1202 ; Check very high ppO2 manually | |
| 1203 tstfsz xC+2 ; char_I_O2_ratio * p_amb/10 > 65536, ppO2>6,55bar? | |
| 1204 return ; Done. | |
| 1205 ; Check if ppO2>3,30bar | |
| 1206 btfsc xC+1,7 | |
| 1207 return ; Done. | |
| 1208 | |
| 1209 ; ; Check for low ppo2 | |
| 1210 ; movff xC+0,sub_b+0 | |
| 1211 ; movff xC+1,sub_b+1 | |
| 1212 ; movff opt_ppO2_min,WREG | |
| 1213 ; mullw d'100' ; opt_ppO2_min*100 | |
| 1214 ; movff PRODL,sub_a+0 | |
| 1215 ; movff PRODH,sub_a+1 | |
| 1216 ; call subU16 | |
| 1217 ; btfss neg_flag | |
| 1218 ; return ; Done (Too low). | |
| 1219 | |
| 1220 ;check if we are within our warning thresholds! | |
| 1221 movff xC+0,sub_b+0 | |
| 1222 movff xC+1,sub_b+1 | |
| 1223 movff opt_ppO2_max,WREG ; PPO2 Max for MOD calculation and color coding in divemode | |
| 1224 addlw .1 ; e.g. >1.60 | |
| 1225 mullw d'100' ; opt_ppO2_max*100 | |
| 1226 movff PRODL,sub_a+0 | |
| 1227 movff PRODH,sub_a+1 | |
| 1228 call subU16 | |
| 1229 btfss neg_flag | |
| 0 | 1230 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 69 | 1231 return ; Done. |
| 0 | 1232 |
| 1233 check_dil_common: ; With Dil 0-4 in WREG | |
| 1234 btfsc better_gas_available ; Better Diluent already found? | |
| 1235 return ; Yes, return | |
| 1236 lfsr FSR1,opt_dil_type ; 0=Disabled, 1=First, 2=Normal | |
| 1237 tstfsz PLUSW1 ; =0? | |
| 1238 bra check_dil_common1 ; No | |
| 1239 return ; Yes, skip inactive diluents for test | |
| 1240 check_dil_common1: | |
| 1241 incf WREG,W ; 1-5 | |
| 1242 cpfseq active_gas ; is this diluent currently selected? | |
| 1243 bra check_dil_common2 ; No | |
| 1244 return ; Yes, skip test for active diluent | |
| 1245 check_dil_common2: | |
| 1246 decf WREG,W ; 0-4 | |
| 1247 movwf hi ; Save tested diluent 0-4 | |
| 1248 lfsr FSR1,char_I_dil_change | |
| 1249 movff PLUSW1,lo ; Change depth into lo | |
| 1250 movlw minimum_change_depth | |
| 1251 cpfsgt lo ; Change depth>minimum_change_depth? | |
| 1252 return ; No, Change depth not deep enough, skip! | |
| 1253 movf xC+0,W ; load depth in m into WREG | |
| 1254 cpfsgt lo ; gas_change_depth < current depth? | |
| 1255 return ; No, check next gas | |
| 1256 incf hi,W ; 1-5 | |
| 1257 movwf better_gas_number ; number (1-5) of the "better gas" in divemode, =0: no better gas available | |
| 69 | 1258 movlw better_gas_window_neg |
| 1259 subwf lo,W ; Change depth-better_gas_window_neg | |
| 1260 cpfslt xC+0 ; current depth<Change depth-better_gas_window_neg? | |
| 0 | 1261 bsf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode |
| 1262 return | |
| 1263 | |
| 1264 ;============================================================================= | |
| 1265 ; Setup everything to enter divemode. | |
| 1266 ; | |
| 1267 | |
| 1268 dive_boot_oc: | |
| 1269 extern get_first_gas_to_WREG | |
| 1270 call get_first_gas_to_WREG ; Gets first gas (0-4) into WREG | |
| 1271 movff WREG,char_I_first_gas ; Copy for compatibility | |
| 1272 rcall setup_gas_registers ; With WREG=Gas 0-4 | |
| 197 | 1273 banksel char_I_first_gas |
| 1274 incf char_I_first_gas,F ; 0-4 -> 1-5 | |
| 1275 banksel common | |
| 0 | 1276 return |
| 1277 | |
| 1278 dive_boot_cc: | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1279 bcf is_bailout ; =1: Bailout |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1280 bcf setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1281 bcf blinking_setpoint ; Reset blinking SP flag |
| 192 | 1282 call compute_ppo2 ; compute mv_sensorX and ppo2_sensorX arrays |
| 1283 bsf voting_logic_sensor1 | |
| 1284 bsf voting_logic_sensor2 | |
| 1285 bsf voting_logic_sensor3 | |
| 0 | 1286 rcall divemode_setup_sensor_values ; setup sensor values |
| 192 | 1287 |
| 0 | 1288 TSTOSS opt_ccr_mode ; =0: Fixed SP, =1: Sensor |
| 1289 movff char_I_setpoint_cbar+0,char_I_const_ppO2 ; Setup fixed Setpoint (Always start with SP1) | |
| 1290 extern get_first_dil_to_WREG | |
| 1291 call get_first_dil_to_WREG ; Gets first gas (0-4) into WREG | |
| 1292 movff WREG,char_I_first_gas ; Copy for compatibility | |
| 1293 rcall setup_dil_registers ; With WREG=Gas 0-4 | |
| 197 | 1294 banksel char_I_first_gas |
| 1295 incf char_I_first_gas,F ; 0-4 -> 1-5 | |
| 1296 banksel common | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1297 rcall calc_deko_divemode_sensor ; External sensor stuff |
| 0 | 1298 return |
| 1299 | |
| 1300 diveloop_boot: | |
| 1301 call restart_set_modes_and_flags | |
| 1302 | |
| 1303 call I2C_sleep_accelerometer ; Stop accelerometer | |
| 1304 call I2C_sleep_compass ; Stop compass | |
| 1305 | |
| 1306 clrf WREG | |
| 1307 movff WREG,max_pressure+0 ; clear some variables | |
| 1308 movff WREG,max_pressure+1 | |
| 255 | 1309 movff WREG,compass_bearing+0 |
| 1310 movff WREG,compass_bearing+1 | |
| 1311 | |
| 1312 bcf compass_bearing_set | |
| 0 | 1313 |
| 1314 bcf use_agf ; Start with normal GF set | |
| 1315 bcf divemode_menu ; clear divemode menu flag | |
| 1316 movlw d'1' | |
| 1317 movwf apnoe_max_pressure+0 | |
| 1318 clrf apnoe_max_pressure+1 | |
| 1319 clrf apnoe_surface_mins | |
| 1320 clrf apnoe_surface_secs | |
| 1321 clrf apnoe_mins | |
| 1322 clrf divemins+0 | |
| 1323 clrf divemins+1 | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1324 bcf no_more_divesecs ; =1: Do no longer show seconds in divemode |
| 0 | 1325 bcf divemode_menu_active |
| 1326 clrf menupos | |
|
277
24daa6523218
1.79beta - update internal sensor registers during boot
heinrichsweikamp
parents:
275
diff
changeset
|
1327 clrf menupos2 ; Reset to zero (Zero=no premenu or simulator task) |
| 0 | 1328 |
| 1329 btfss FLAG_ccr_mode | |
| 1330 rcall dive_boot_oc | |
| 1331 btfsc FLAG_ccr_mode | |
| 1332 rcall dive_boot_cc | |
| 1333 | |
| 1334 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 1335 clrf better_gas_number ; Clear better gas register | |
| 1336 | |
|
104
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1337 bcf show_safety_stop ;=1: Show the safety stop |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1338 clrf safety_stop_countdown ; Clear count-down |
|
223579e905c3
Show a Safety Stop if enabled (Menu "Deco Parameters")
heinrichsweikamp
parents:
102
diff
changeset
|
1339 |
| 0 | 1340 clrf samplesecs |
| 1341 clrf apnoe_timeout_counter ; timeout in minutes | |
| 1342 clrf timeout_counter ; takes care of the timeout (Low byte) | |
| 1343 clrf timeout_counter2 ; takes care of the timeout (High byte) | |
| 1344 clrf AlarmType ; Clear all alarms | |
| 1345 bcf event_occured ; clear flag | |
| 1346 clrf total_divetime_seconds+1 | |
| 1347 clrf average_depth_hold_total+0 | |
| 1348 clrf average_depth_hold_total+1 | |
| 1349 clrf average_depth_hold_total+2 | |
| 1350 clrf average_depth_hold_total+3 ; Clear Non-Resettable Average | |
| 1351 rcall reset_average1 ; Reset the resettable average depth | |
| 1352 bcf decostop_active | |
| 1353 bcf better_gas_available ;=1: A better gas is available and a gas change is advised in divemode | |
| 204 | 1354 call ghostwriter_short_header ; Write short header with divenumber into profile memory |
| 0 | 1355 |
| 1356 btfsc simulatormode_active | |
| 1357 bra diveloop_boot_1 | |
| 1358 ; Normal mode = Surface pressure is the pressure 30mn before dive. | |
| 1359 SAFE_2BYTE_COPY last_surfpressure_30min, int_I_pres_surface ;copy surfacepressure to deco routine | |
| 1360 SAFE_2BYTE_COPY last_surfpressure_30min, last_surfpressure ;copy surfacepressure to last_surfpressure for correct depth | |
| 1361 bra diveloop_boot_2 | |
| 1362 | |
| 1363 diveloop_boot_1: | |
| 1364 ; Simulator mode: Surface pressure is 1bar. | |
| 1365 movlw LOW .1000 | |
| 1366 movff WREG,int_I_pres_surface+0 ; LOW copy surfacepressure to deco routine | |
| 1367 movlw HIGH .1000 | |
| 1368 movff WREG,int_I_pres_surface+1 ; HIGH copy surfacepressure to deco routine | |
| 1369 | |
| 1370 diveloop_boot_2: | |
| 1371 SAFE_2BYTE_COPY temperature,minimum_temperature ; Reset Min-Temp registers | |
| 1372 | |
| 1373 ; Init profile recording parameters | |
|
23
e402813343b6
new option to switch samplingrate between 10s and 2s
heinrichsweikamp
parents:
0
diff
changeset
|
1374 movff samplingrate,samplesecs_value ; to avoid EEPROM access in the ISR |
| 0 | 1375 movlw div_temperature |
| 1376 movwf divisor_temperature ; load divisors for profile storage | |
| 1377 movlw div_deco | |
| 1378 movwf divisor_deco | |
| 1379 movlw div_gf | |
| 1380 movwf divisor_gf | |
| 1381 movlw div_ppo2_sensors | |
| 1382 movwf divisor_ppo2_sensors | |
| 1383 movlw div_decoplan | |
| 1384 movwf divisor_decoplan | |
| 1385 movlw div_cns | |
| 1386 movwf divisor_cns | |
| 1387 movlw div_tank | |
| 1388 movwf divisor_tank | |
| 1389 | |
| 1390 btfss FLAG_apnoe_mode ; In Apnoe mode? | |
|
102
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1391 bra divemode_boot1 |
| 0 | 1392 ; Overwrite some parameters in Apnoe mode.... |
| 1393 movlw samplingrate_apnoe | |
| 1394 movwf samplesecs_value ; to avoid EEPROM access in the ISR | |
|
102
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1395 divemode_boot1: |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1396 btfsc FLAG_ccr_mode ; =1: CCR mode (Fixed ppO2 or Sensor) active |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1397 bra divemode_boot2 |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1398 ; in OC Mode, disable ppO2 logging |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1399 movlw .0 |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1400 movwf divisor_ppo2_sensors |
|
37275e0fa7f5
NEW: Show End-of-Dive time together with clock during deco
heinrichsweikamp
parents:
99
diff
changeset
|
1401 divemode_boot2: |
| 0 | 1402 |
| 1403 bcf LEDg | |
| 1404 bcf LEDr | |
| 1405 bcf realdive | |
| 1406 btfss simulatormode_active ; do not disable in simulator mode! | |
| 1407 call disable_rs232 ; Disable RS232 | |
| 1408 btfsc enable_screen_dumps ; =1: Ignore vin_usb, wait for "l" command (Screen dump) | |
| 1409 call enable_rs232 ; Also sets to speed_normal ... | |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1410 ; Reset divetime seconds |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1411 movlw .2 ; Start at 2seconds |
| 0 | 1412 movwf total_divetime_seconds+0 |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1413 movwf divesecs |
|
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
38
diff
changeset
|
1414 movwf apnoe_secs |
| 0 | 1415 bsf divemode2 ; displayed divetime is running (Divetime starts HERE) |
| 1416 | |
| 1417 movff int_O_CNS_fraction+0,CNS_start+0 | |
| 1418 movff int_O_CNS_fraction+1,CNS_start+1 ; Save CNS value at beginning of dive | |
| 1419 movff char_O_relative_gradient_GF,GF_start ; Save GF value at beginning of dive | |
| 1420 return ; Done with divemode boot | |
| 1421 | |
| 1422 divemode_check_for_warnings: | |
| 131 | 1423 movlw .2 |
| 1424 cpfsgt warning_counter ; only two warnings active? | |
| 1425 bra divemode_check_for_warnings1 ; Yes, update every second | |
| 1426 | |
| 1427 btfss secs,0 ; Every two seconds... | |
| 1428 return | |
| 1429 btfss secs,1 ; Every four seconds... | |
| 0 | 1430 return |
| 1431 | |
| 131 | 1432 divemode_check_for_warnings1: |
| 0 | 1433 movf warning_counter_backup,W |
| 1434 cpfseq warning_counter ; warning_counter_backup = warning_counter? | |
| 1435 call TFT_clear_warning_text ; No, clear all warnings | |
| 1436 movff warning_counter,warning_counter_backup ; copy warning_counter | |
| 1437 | |
| 1438 bcf warning_active ; Clear flag | |
| 1439 clrf warning_counter ; Clear counter | |
| 1440 | |
| 1441 ; Warnings for all modes | |
| 1442 call check_warn_battery ; Check if the battery level should be displayed/warned | |
| 55 | 1443 call check_divetimeout ; Not actually a warning. Check and show the divemode timeout |
| 0 | 1444 |
| 1445 btfsc FLAG_apnoe_mode ; Done for Apnoe or Gauge mode | |
| 1446 bra divemode_check_for_warnings2 | |
| 1447 btfsc FLAG_gauge_mode ; Done for Apnoe or Gauge mode | |
| 1448 bra divemode_check_for_warnings2 | |
| 1449 | |
| 1450 ; Warnings only in deco modes | |
| 1451 btfss FLAG_ccr_mode ; Don't check in CCR mode | |
| 1452 rcall check_ppO2 ; check ppO2 and displays warning, if required | |
| 1453 btfsc is_bailout ; But check in Bailout case... | |
| 1454 rcall check_ppO2 ; check ppO2 and displays warning, if required | |
| 1455 rcall check_cns_violation ; Check CNS value and display it, if required | |
| 1456 btfsc decostop_active ; In deco mode? | |
| 1457 rcall check_and_store_gf_violation ; Yes, Sets warnings, if required | |
| 1458 btfsc decostop_active ; In deco mode? | |
| 1459 call TFT_ftts ; Show @+x time | |
| 1460 btfsc use_agf ; In aGF mode? | |
| 1461 rcall warn_agf ; Yes, show a warning for it | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1462 btfsc setpoint_fallback ; =1: Fallback to SP1 due to external O2 sensor failure |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1463 rcall warn_fallback ; Show the warning |
| 0 | 1464 |
| 1465 divemode_check_for_warnings2: | |
| 1466 ; Display the warning icon? | |
| 1467 btfsc warning_active ; Any warning active? | |
| 1468 call TFT_divemode_warning ; Yes | |
| 1469 btfss warning_active ; Any warning active? | |
| 1470 call TFT_divemode_warning_clear ; No, clear warning icon | |
| 1471 | |
| 1472 ; Setup warning_page number | |
| 1473 incf warning_page,F | |
| 1474 bcf STATUS,C | |
| 1475 rlcf warning_page,W ; *2 | |
| 1476 cpfsgt warning_counter ; > warning_counter | |
| 1477 clrf warning_page ; No, clear | |
| 1478 | |
| 1479 ; Clear 2nd row of warnings if there is nothing to show (on this page) | |
| 1480 btfss second_row_warning ; =1: The second row contains a warning | |
| 1481 call TFT_clear_warning_text_2nd_row ; No, clear this row | |
| 1482 return ; Done. | |
| 1483 | |
| 1484 global check_warn_battery | |
| 1485 check_warn_battery: | |
| 1486 movff batt_percent,lo | |
| 1487 movlw battery_show_level+1 | |
| 1488 cpfslt lo | |
| 1489 return ; No Display, no warning | |
| 1490 ; Display Battery, but warn? | |
| 1491 incf warning_counter,F ; increase counter | |
| 1492 call TFT_update_batt_percent_divemode ; Show percent | |
| 1493 | |
| 86 | 1494 movff batt_percent,lo |
| 0 | 1495 movlw color_code_battery_low+1 |
| 1496 cpfslt lo ; | |
| 1497 return ; No warning | |
| 1498 bsf warning_active ; Set Warning flag | |
| 1499 return | |
| 1500 | |
| 55 | 1501 check_divetimeout: |
| 1502 btfsc divemode2 | |
| 1503 return ; displayed divetime is not running | |
| 1504 incf warning_counter,F ; increase counter | |
| 1505 call TFT_divetimeout ; Show timeout counter | |
| 1506 return | |
| 1507 | |
| 1508 | |
| 0 | 1509 check_ppO2: ; check current ppO2 and display warning if required |
| 1510 SAFE_2BYTE_COPY amb_pressure, xA | |
| 1511 movlw d'10' | |
| 1512 movwf xB+0 | |
| 1513 clrf xB+1 | |
| 1514 call div16x16 ; xC=p_amb/10 | |
| 1515 | |
| 1516 movff xC+0,xA+0 | |
| 1517 movff xC+1,xA+1 | |
| 1518 movff char_I_O2_ratio,xB+0 ; =O2 ratio | |
| 1519 clrf xB+1 | |
| 1520 call mult16x16 ; char_I_O2_ratio * p_amb/10 | |
| 1521 | |
| 1522 ; Check very high ppO2 manually | |
| 1523 tstfsz xC+2 ; char_I_O2_ratio * p_amb/10 > 65536, ppO2>6,55bar? | |
| 1524 bra check_ppO2_1 ; Yes, display Value! | |
| 1525 ; Check if ppO2>3,30bar | |
| 1526 btfsc xC+1,7 | |
| 1527 bra check_ppO2_1 ; Yes! | |
| 1528 | |
| 1529 ; Check for low ppo2 | |
| 1530 movff xC+0,sub_b+0 | |
| 1531 movff xC+1,sub_b+1 | |
| 1532 movff opt_ppO2_min,WREG | |
| 1533 mullw d'100' ; opt_ppO2_min*100 | |
| 1534 movff PRODL,sub_a+0 | |
| 1535 movff PRODH,sub_a+1 | |
| 1536 call subU16 | |
| 1537 btfsc neg_flag | |
| 1538 bra check_ppO2_0 ; Not too low | |
| 1539 ; ppO2 low | |
| 1540 incf warning_counter,F ; increase counter | |
| 1541 call TFT_display_ppo2 ; Show ppO2 | |
| 1542 movlw d'4' ; Type of Alarm (ppO2 low) | |
| 1543 movwf AlarmType ; Copy to Alarm Register | |
| 1544 bsf event_occured ; Set Event Flag | |
| 1545 bsf warning_active ; Set Warning flag | |
| 1546 return ; Done. | |
| 1547 | |
| 1548 check_ppO2_0: | |
| 1549 ; Check if ppO2 should be displayed | |
| 1550 movlw ppo2_display_high | |
| 1551 mullw d'100' ; ppo2_display_high*100 | |
| 1552 movff PRODL,sub_a+0 | |
| 1553 movff PRODH,sub_a+1 | |
| 1554 call subU16 | |
| 1555 btfss neg_flag | |
| 1556 return ; No Display, no warning | |
| 1557 ; Display ppO2, but warn? | |
| 1558 incf warning_counter,F ; increase counter | |
| 1559 call TFT_display_ppo2 ; Show ppO2 | |
| 1560 | |
| 1561 ;check if we are within our warning thresholds! | |
| 1562 movff xC+0,sub_b+0 | |
| 1563 movff xC+1,sub_b+1 | |
| 1564 movff opt_ppO2_max,WREG ; PPO2 Max for MOD calculation and color coding in divemode | |
| 69 | 1565 addlw .1 ; e.g. >1.60 |
| 0 | 1566 mullw d'100' ; opt_ppO2_max*100 |
| 1567 movff PRODL,sub_a+0 | |
| 1568 movff PRODH,sub_a+1 | |
| 1569 call subU16 | |
| 1570 btfss neg_flag | |
| 1571 return ; Done. Not too high | |
| 1572 movlw d'5' ; Type of Alarm (ppO2 high) | |
| 1573 movwf AlarmType ; Copy to Alarm Register | |
| 1574 bsf event_occured ; Set Event Flag | |
| 1575 bsf warning_active ; Set Warning flag | |
| 1576 return ; Done. | |
| 1577 | |
| 1578 check_ppO2_1: ; ppO2 very high | |
| 1579 incf warning_counter,F ; increase counter | |
| 1580 call TFT_display_ppo2 ; Show ppO2 | |
| 1581 movlw d'5' ; Type of Alarm | |
| 1582 movwf AlarmType ; Copy to Alarm Register | |
| 1583 bsf event_occured ; Set Event Flag | |
| 1584 bsf warning_active ; Set Warning flag | |
| 1585 return ; Done. | |
| 1586 | |
| 1587 global check_cns_violation | |
| 1588 check_cns_violation: | |
| 1589 ; Check if CNS should be displayed | |
| 1590 movff int_O_CNS_fraction+1,lo ; copy into bank1 | |
| 1591 tstfsz lo ; >255% ? | |
| 1592 bra check_cns_violation2 ; Yes | |
| 1593 movff int_O_CNS_fraction+0,lo ; copy into bank1 | |
| 1594 | |
| 1595 movlw cns_warning_high ; cns_warning_high | |
| 1596 subwf lo,W | |
| 1597 btfsc STATUS,C | |
| 1598 bsf warning_active ; Set Warning flag | |
| 1599 | |
| 1600 movlw cns_display_high ; cns_display_high | |
| 1601 subwf lo,W | |
| 1602 btfss STATUS,C | |
| 1603 return ; No Display, no warning | |
| 1604 ; Display CNS | |
| 1605 incf warning_counter,F ; increase counter | |
| 1606 call TFT_display_cns ; Show CNS | |
| 1607 return | |
| 1608 | |
| 1609 check_cns_violation2: | |
| 1610 incf warning_counter,F ; increase counter | |
| 1611 call TFT_display_cns ; Show CNS | |
| 1612 bsf warning_active ; Set Warning flag | |
| 1613 return | |
| 1614 | |
| 1615 global check_and_store_gf_violation | |
| 1616 check_and_store_gf_violation: | |
| 1617 movff char_O_gradient_factor,lo ; gradient factor absolute (Non-GF model) | |
| 1618 movff char_I_deco_model,hi | |
| 1619 decfsz hi,F ; jump over next line if char_I_deco_model == 1 | |
| 1620 movff char_O_relative_gradient_GF,lo ; gradient factor relative (GF model) | |
| 1621 | |
| 1622 movlw gf_warning_high | |
| 1623 cpfsgt lo | |
| 1624 bra check_and_store_gf_violation2 ; No warning | |
| 1625 movlw d'2' ; Type of Alarm | |
| 1626 movwf AlarmType ; Copy to Alarm Register | |
| 1627 bsf event_occured ; Set Event Flag | |
| 1628 bsf warning_active ; Set Warning flag | |
| 1629 check_and_store_gf_violation2: | |
| 1630 movlw gf_display_high | |
| 1631 cpfsgt lo | |
| 1632 return ; No Display, no warning | |
| 1633 ; Display GF | |
| 1634 incf warning_counter,F ; increase counter | |
| 1635 call TFT_warning_gf ; Show GF Warning | |
| 1636 return | |
| 1637 | |
| 1638 warn_agf: | |
| 1639 incf warning_counter,F ; increase counter | |
| 1640 call TFT_warning_agf ; Show aGF warning | |
|
145
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1641 return |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1642 |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1643 warn_fallback: |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1644 incf warning_counter,F ; increase counter |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1645 call TFT_warning_fallback ; Show fallback warning |
|
e3ac5b2021bc
NEW: Setpoint-Fallback option for external O2 sensor failure
heinrichsweikamp
parents:
138
diff
changeset
|
1646 bsf warning_active ; Set Warning flag |
| 0 | 1647 return |
| 1648 | |
| 1649 | |
| 1650 END |