Mercurial > public > hwos_code
annotate src/adc_lightsensor.asm @ 610:2ce43f09586e
Mod for new pcb designs
| author | heinrichsweikamp |
|---|---|
| date | Wed, 09 Jan 2019 18:35:20 +0100 |
| parents | d866684249bd |
| children | b87f23fae743 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 604 | 3 ; File adc.asm V2.99e |
| 0 | 4 ; |
| 5 ; | |
| 6 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 7 ;============================================================================= | |
| 8 ; HISTORY | |
| 9 ; 2011-08-08 : [mH] moving from OSTC code | |
| 10 | |
| 275 | 11 #include "hwos.inc" |
| 0 | 12 #include "math.inc" |
| 13 #include "wait.inc" | |
| 14 #include "eeprom_rs232.inc" | |
| 113 | 15 #include "i2c.inc" |
| 0 | 16 |
| 582 | 17 extern reset_battery_internal_only |
| 18 | |
| 604 | 19 adc_light CODE |
| 582 | 20 |
| 21 ;============================================================================= | |
| 0 | 22 |
| 23 wait_adc: | |
| 24 movwf ADCON0 | |
| 608 | 25 nop |
| 26 nop | |
| 582 | 27 nop |
| 28 bsf ADCON0,1 ; start ADC | |
| 0 | 29 wait_adc2: |
| 604 | 30 btfsc ADCON0,1 ; wait... |
| 0 | 31 bra wait_adc2 |
| 582 | 32 return |
| 0 | 33 |
| 34 global get_battery_voltage | |
| 582 | 35 get_battery_voltage: ; starts ADC and waits until finished |
| 36 btfss battery_gauge_available | |
| 604 | 37 bra get_battery_voltage1 ; normal ostc3 hardware |
| 113 | 38 |
| 582 | 39 call lt2942_get_accumulated_charge |
| 40 call lt2942_get_voltage | |
| 41 | |
| 604 | 42 tstfsz batt_voltage+1 ; < 256 mV ? |
| 43 bra get_battery_voltage_noretry ; NO | |
| 218 | 44 |
| 582 | 45 ; Retry |
| 46 call lt2942_get_accumulated_charge | |
| 47 call lt2942_get_voltage | |
| 48 | |
| 466 | 49 get_battery_voltage_noretry: |
| 582 | 50 btfsc divemode |
| 604 | 51 return ; not in divemode |
| 218 | 52 |
| 582 | 53 bcf cv_active |
| 54 bcf cc_active | |
| 55 bcf LEDr | |
| 56 bcf TRISJ,2 ; Chrg-Out output | |
| 57 bsf CHRG_OUT | |
| 120 | 58 |
| 582 | 59 btfss CHRG_IN |
| 60 bra charge_cc_active | |
| 120 | 61 |
| 582 | 62 bcf CHRG_OUT |
| 63 bsf TRISJ,2 ; Chrg-Out high impedance | |
| 120 | 64 |
| 582 | 65 WAITMS d'1' |
| 120 | 66 |
| 582 | 67 btfsc CHRG_IN |
| 68 return | |
| 603 | 69 charge_cv_active: |
| 582 | 70 decfsz get_bat_volt_counter,F |
| 71 return | |
| 72 movlw .15 | |
| 604 | 73 cpfsgt batt_voltage+1 ; battery voltage >= 16*256mV (4,096V)? |
| 74 bra charge_cc_active ; NO | |
| 582 | 75 bsf cc_active |
| 76 bsf cv_active | |
| 604 | 77 bsf LEDr ; indicate charging |
| 78 call lt2942_charge_done ; reset accumulating registers to 0xFFFF | |
| 582 | 79 WAITMS d'10' |
| 604 | 80 bcf LEDr ; indicate charging |
| 582 | 81 bsf get_bat_volt_counter,0 ; =1 |
| 82 return | |
| 120 | 83 |
| 207 | 84 charge_cc_active: |
| 582 | 85 bsf cc_active |
| 604 | 86 bsf LEDr ; indicate charging |
| 582 | 87 bcf CHRG_OUT |
| 604 | 88 bsf TRISJ,2 ; chrg-Out high impedance |
| 603 | 89 movlw .15 |
| 604 | 90 cpfsgt batt_voltage+1 ; battery voltage >= 16*256mV (4.096 V)? |
| 91 bra charge_cc_active2 ; NO | |
| 603 | 92 movlw .81 |
| 604 | 93 cpfslt batt_voltage+0 ; battery voltage >= 80mV (+4096mV from batt_voltage+1)? |
| 94 bra charge_cv_active ; YES | |
| 603 | 95 charge_cc_active2: |
| 582 | 96 movlw .10 |
| 97 movwf get_bat_volt_counter | |
| 98 return | |
| 113 | 99 |
| 100 get_battery_voltage1: | |
| 582 | 101 bsf adc_running ; =1: The ADC is in use |
| 102 movlw b'00100000' ; 2.048V Vref+ -> 1LSB = 500µV | |
| 0 | 103 movwf ADCON1 |
| 582 | 104 movlw b'00011001' ; power on ADC, select AN6 |
| 105 rcall wait_adc | |
| 0 | 106 |
| 582 | 107 movff ADRESH,batt_voltage+1 ; store value |
| 108 movff ADRESL,batt_voltage+0 ; store value | |
| 109 bcf ADCON0,0 ; power off ADC | |
| 0 | 110 |
| 604 | 111 ; Multiply with 2.006 to be exact here... |
| 0 | 112 ; bcf STATUS,C |
| 113 ; rlcf xA+0,F | |
| 114 ; | |
| 582 | 115 ; rlcf xA+1,F ; x2 |
| 0 | 116 |
| 582 | 117 ; movff xA+0,batt_voltage+0 ; store value |
| 0 | 118 ; movff xA+1,batt_voltage+1 |
| 119 | |
| 582 | 120 movlw LOW lithium_36v_low |
| 0 | 121 movwf sub_a+0 |
| 582 | 122 movlw HIGH lithium_36v_low |
| 0 | 123 movwf sub_a+1 |
| 124 movff batt_voltage+0,sub_b+0 | |
| 125 movff batt_voltage+1,sub_b+1 | |
| 582 | 126 call subU16 ; sub_c = sub_a - sub_b |
| 604 | 127 ; Battery is 3.6V (> lithium_36v_low?) |
| 0 | 128 btfss neg_flag |
| 604 | 129 bra get_battery_voltage4 ; NO - use 1.5V |
| 130 bsf battery_is_36v ; YES - set flag (Cleared in power-on reset only!) | |
| 0 | 131 |
| 582 | 132 ; Check if the battery is near-dead already |
| 133 movlw LOW lithium_36v_empty | |
| 0 | 134 movwf sub_a+0 |
| 582 | 135 movlw HIGH lithium_36v_empty |
| 0 | 136 movwf sub_a+1 |
| 582 | 137 call subU16 ; sub_c = sub_a - sub_b |
| 604 | 138 ; Battery is not dead yet (> lithium_36v_empty)? |
| 0 | 139 btfsc neg_flag |
| 604 | 140 bra get_battery_voltage2 ; YES - battery is still ok |
| 0 | 141 |
| 582 | 142 ; Battery is probably dead very soon |
| 143 ; Set ">=24Ah used" into battery gauge registers | |
| 144 movlw .128 | |
| 145 movff WREG,battery_gauge+5 | |
| 0 | 146 |
| 147 get_battery_voltage2: | |
| 604 | 148 ; Use 3.6V battery gauging mode |
| 0 | 149 movff battery_gauge+5,xC+3 |
| 150 movff battery_gauge+4,xC+2 | |
| 151 movff battery_gauge+3,xC+1 | |
| 152 movff battery_gauge+2,xC+0 | |
| 604 | 153 ; battery_gauge: 6 is nAs |
| 154 ; divide through 65536 | |
| 155 ; divide through battery_capacity:2 | |
| 156 ; result is in percent | |
| 448 | 157 movff internal_battery_capacity+0,xB+0 |
| 158 movff internal_battery_capacity+1,xB+1 | |
| 604 | 159 call div32x16 ; xC:4 = xC:4 / xB:2 with xA as remainder |
| 0 | 160 movff xC+0,lo |
| 604 | 161 ; limit to 100 |
| 582 | 162 movlw .100 |
| 163 cpfslt lo | |
| 164 movwf lo | |
| 604 | 165 ; lo will be between 0 (full) and 100 (empty) |
| 0 | 166 movf lo,W |
| 167 sublw .100 | |
| 168 movwf lo | |
| 169 get_battery_voltage3: | |
| 170 movlw .100 | |
| 171 cpfslt lo | |
| 172 movwf lo | |
| 604 | 173 ; lo will be between 100 (full) and 0 (empty) |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
174 |
| 604 | 175 ; use 3.6V battery sensing based on 50 mA load |
| 582 | 176 ; 75% |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
177 movff batt_voltage+0,sub_b+0 |
|
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
178 movff batt_voltage+1,sub_b+1 |
| 582 | 179 movlw LOW lithium_36v_75 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
180 movwf sub_a+0 |
| 582 | 181 movlw HIGH lithium_36v_75 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
182 movwf sub_a+1 |
| 582 | 183 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
184 btfsc neg_flag |
| 582 | 185 bra get_battery_voltage3a |
| 186 movlw .75 | |
| 187 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
188 get_battery_voltage3a: |
|
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
189 ; 50% |
| 582 | 190 movlw LOW lithium_36v_50 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
191 movwf sub_a+0 |
| 582 | 192 movlw HIGH lithium_36v_50 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
193 movwf sub_a+1 |
| 582 | 194 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
195 btfsc neg_flag |
| 582 | 196 bra get_battery_voltage3b |
| 197 movlw .50 | |
| 198 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
199 get_battery_voltage3b: |
| 582 | 200 ; 25% |
| 201 movlw LOW lithium_36v_25 | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
202 movwf sub_a+0 |
| 582 | 203 movlw HIGH lithium_36v_25 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
204 movwf sub_a+1 |
| 582 | 205 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
206 btfsc neg_flag |
| 582 | 207 bra get_battery_voltage3c |
| 208 movlw .25 | |
| 209 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
210 get_battery_voltage3c: |
| 582 | 211 ; 10% |
| 212 movlw LOW lithium_36v_10 | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
213 movwf sub_a+0 |
| 582 | 214 movlw HIGH lithium_36v_10 |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
215 movwf sub_a+1 |
| 582 | 216 call subU16 ; sub_c = sub_a - sub_b |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
217 btfsc neg_flag |
| 582 | 218 bra get_battery_voltage3d |
| 219 movlw .10 | |
| 220 movwf lo | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
0
diff
changeset
|
221 get_battery_voltage3d: |
|
44
18fe4e668baa
BUGFIX: Percent display with 1,5V batteries
heinrichsweikamp
parents:
37
diff
changeset
|
222 movlw .100 |
|
18fe4e668baa
BUGFIX: Percent display with 1,5V batteries
heinrichsweikamp
parents:
37
diff
changeset
|
223 cpfslt lo |
|
18fe4e668baa
BUGFIX: Percent display with 1,5V batteries
heinrichsweikamp
parents:
37
diff
changeset
|
224 movwf lo |
| 604 | 225 ; lo will be between 100 (full) and 0 (empty) |
| 582 | 226 movf batt_percent,W |
| 227 cpfsgt lo ; keep batt_percent on the lowest value found | |
| 228 movff lo,batt_percent ; store value | |
| 604 | 229 btfsc battery_is_36v ; but always use computed value for 3.6V battery |
| 582 | 230 movff lo,batt_percent ; store value |
| 604 | 231 bcf adc_running ; =1: the ADC is in use |
| 0 | 232 return |
| 233 | |
| 234 get_battery_voltage4: | |
| 604 | 235 ; use 1.5V battery voltage mode |
| 236 ; use approximation (batt_voltage:2-aa_15v_low)/4 = lo | |
| 0 | 237 movff batt_voltage+0,sub_a+0 |
| 238 movff batt_voltage+1,sub_a+1 | |
| 582 | 239 movlw LOW aa_15v_low |
| 240 movwf sub_b+0 | |
| 241 movlw HIGH aa_15v_low | |
| 0 | 242 movwf sub_b+1 |
| 582 | 243 call subU16 ; sub_c = sub_a - sub_b |
| 244 bcf STATUS,C | |
| 245 rrcf sub_c+1 | |
| 246 rrcf sub_c+0 ; /2 | |
| 247 bcf STATUS,C | |
| 248 rrcf sub_c+1 | |
| 249 rrcf sub_c+0 ; /4 | |
| 250 movff sub_c+0,lo | |
| 604 | 251 bra get_battery_voltage3d ; check limits and return |
| 0 | 252 |
| 253 global get_ambient_level | |
| 582 | 254 get_ambient_level: ; starts ADC and waits until finished |
| 255 btfsc adc_running ; ADC in use? | |
| 604 | 256 return ; YES - return |
| 0 | 257 |
| 582 | 258 btfsc ambient_sensor |
| 604 | 259 bra get_ambient_level1 ; normal OSTC3 hardware |
| 203 | 260 |
| 604 | 261 banksel isr_backup ; back to bank0 ISR data |
| 203 | 262 movff opt_brightness,isr1_temp |
| 582 | 263 incf isr1_temp,F ; adjust 0-2 to 1-3 |
| 264 movlw ambient_light_max_high_cr ; cR and 2 hardware brightest setting | |
| 203 | 265 dcfsnz isr1_temp,F |
| 582 | 266 movlw ambient_light_max_eco ; brightest setting |
| 203 | 267 dcfsnz isr1_temp,F |
| 582 | 268 movlw ambient_light_max_medium ; brightest setting |
| 203 | 269 |
| 604 | 270 movff WREG,ambient_light+0 ; set to max. |
| 271 movff ambient_light+0,max_CCPR1L ; store value for dimming in TMR7 interrupt | |
| 203 | 272 return |
| 113 | 273 |
| 274 get_ambient_level1: | |
| 582 | 275 movlw b'00000000' ; Vref+ = Vdd |
| 0 | 276 movwf ADCON1 |
| 582 | 277 movlw b'00011101' ; power on ADC, select AN7 |
| 278 rcall wait_adc | |
| 0 | 279 |
| 280 movff ADRESH,ambient_light+1 | |
| 281 movff ADRESL,ambient_light+0 | |
| 582 | 282 bcf ADCON0,0 ; power off ADC |
| 0 | 283 |
| 284 ; ambient_light:2 is between 4096 (direct sunlight) and about 200 (darkness) | |
| 604 | 285 ; first: divide by 16 |
| 582 | 286 banksel ambient_light |
| 0 | 287 bcf STATUS,C |
| 288 rrcf ambient_light+1 | |
| 289 rrcf ambient_light+0 | |
| 290 bcf STATUS,C | |
| 291 rrcf ambient_light+1 | |
| 292 rrcf ambient_light+0 | |
| 293 bcf STATUS,C | |
| 294 rrcf ambient_light+1 | |
| 295 rrcf ambient_light+0 | |
| 296 bcf STATUS,C | |
| 297 rrcf ambient_light+1 | |
| 298 rrcf ambient_light+0 | |
| 604 | 299 ; result: ambient_light:2/16 |
| 300 ; now make sure to have value between ambient_light_low and ambient_light_max | |
| 0 | 301 |
| 582 | 302 movlw .254 |
| 604 | 303 tstfsz ambient_light+1 ; > 255 ? |
| 304 movwf ambient_light+0 ; YES - avoid ADC clipping | |
| 0 | 305 |
| 604 | 306 incfsz ambient_light+0,W ; = 255 ? |
| 307 bra get_ambient_level2 ; NO - continue | |
| 0 | 308 |
| 582 | 309 movlw .254 |
| 310 movwf ambient_light+0 ; avoid ADC clipping | |
| 0 | 311 |
| 312 get_ambient_level2: | |
| 582 | 313 ; movlw .10 |
| 604 | 314 ; subwf ambient_light+0,F ; subtract 10 (ADC Offset) |
| 582 | 315 ; btfsc STATUS,N |
| 316 ; movwf ambient_light+0 ; avoid clipping | |
| 201 | 317 |
| 604 | 318 banksel isr_backup ; back to bank0 ISR data |
| 0 | 319 movff opt_brightness,isr1_temp |
| 320 | |
| 582 | 321 btfsc RCSTA1,7 ; UART module on? |
| 604 | 322 clrf isr1_temp ; YES - set temporally to eco mode |
| 0 | 323 |
| 582 | 324 incf isr1_temp,F ; adjust 0-2 to 1-3 |
| 0 | 325 |
| 582 | 326 banksel common ; flag is in bank1 |
| 327 movlw ambient_light_max_high_cr ; cR and 2 hardware brightest setting | |
| 328 btfss battery_gauge_available | |
| 604 | 329 movlw ambient_light_max_high_15V ; 1.5V battery brightest setting |
| 330 btfsc battery_is_36v ; 3.6V battery in use? | |
| 331 movlw ambient_light_max_high_36V ; YES - 3.6V battery brightest setting | |
| 332 banksel isr_backup ; back to bank0 ISR data | |
| 0 | 333 |
| 334 dcfsnz isr1_temp,F | |
| 582 | 335 movlw ambient_light_max_eco ; brightest setting |
| 0 | 336 dcfsnz isr1_temp,F |
| 582 | 337 movlw ambient_light_max_medium ; brightest setting |
| 0 | 338 |
| 582 | 339 banksel ambient_light |
| 340 incf ambient_light+0,F ; +1 | |
| 604 | 341 cpfslt ambient_light+0 ; smaller than WREG? |
| 342 movwf ambient_light+0 ; NO - set to max. | |
| 0 | 343 |
| 604 | 344 banksel isr_backup ; back to bank0 ISR data |
| 0 | 345 movff opt_brightness,isr1_temp |
| 582 | 346 incf isr1_temp,F ; adjust 0-2 to 1-3 |
| 347 movlw ambient_light_min_high ; darkest setting | |
| 0 | 348 |
| 349 dcfsnz isr1_temp,F | |
| 582 | 350 movlw ambient_light_min_eco ; darkest setting |
| 0 | 351 dcfsnz isr1_temp,F |
| 582 | 352 movlw ambient_light_min_medium ; darkest setting |
| 0 | 353 dcfsnz isr1_temp,F |
| 582 | 354 movlw ambient_light_min_high ; darkest setting |
| 355 | |
| 356 banksel ambient_light | |
| 604 | 357 cpfsgt ambient_light+0 ; bigger than WREG? |
| 358 movwf ambient_light+0 ; NO - set to min | |
| 582 | 359 banksel common |
| 360 | |
| 604 | 361 movff ambient_light+0,max_CCPR1L ; store value for dimming in TMR7 interrupt |
| 0 | 362 return |
| 363 | |
| 113 | 364 global get_analog_inputs |
| 604 | 365 get_analog_inputs: ; start ADC and wait until finished |
| 582 | 366 bsf adc_running ; =1: The ADC is in use |
| 367 btfsc TFT_PWM | |
| 604 | 368 bra get_analog_inputs ; wait for PWM low |
| 369 movlw b'00100000' ; 2.048V Vref+ -> 1 LSB = 500 µV | |
| 113 | 370 movwf ADCON1 |
| 582 | 371 movlw b'00100001' ; power on ADC, select AN8 |
| 372 rcall wait_adc | |
| 373 bcf STATUS,C | |
| 374 rrcf ADRESH,F ; /2 | |
| 375 rrcf ADRESL,W | |
| 604 | 376 ; add to o2_mv_sensor1:2 |
| 582 | 377 addwf o2_mv_sensor1+0,F |
| 378 movf ADRESH,W | |
| 379 addwfc o2_mv_sensor1+1,F | |
| 604 | 380 ; divide by 2 |
| 582 | 381 bcf STATUS,C |
| 382 rrcf o2_mv_sensor1+1,F ; /2 | |
| 383 rrcf o2_mv_sensor1+0,F | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
384 |
| 582 | 385 movlw HIGH ignore_mv |
| 604 | 386 cpfsgt o2_mv_sensor1+1 ; > ignore_mv ? |
| 387 bra get_analog_inputs2a ; NO | |
| 388 ; YES - ignore this reading | |
| 582 | 389 clrf o2_mv_sensor1+1 |
| 390 clrf o2_mv_sensor1+0 | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
391 get_analog_inputs2a: |
| 604 | 392 ; ignore 1.9 mV noise for not-connected inputs |
| 393 tstfsz o2_mv_sensor1+1 ; > 25.5mV ? | |
| 394 bra get_analog_inputs2 ; YES - skip here | |
| 582 | 395 movlw .19 |
| 604 | 396 cpfsgt o2_mv_sensor1+0 ; > 1.9mV ? |
| 397 clrf o2_mv_sensor1+0 ; NO - clear result | |
|
187
669b5d00706d
CHANGE: Longer timeout (4 min) for calibration menu
heinrichsweikamp
parents:
158
diff
changeset
|
398 get_analog_inputs2: |
| 582 | 399 movlw b'00100101' ; power on ADC, select AN9 |
| 400 rcall wait_adc | |
| 401 bcf STATUS,C | |
| 402 rrcf ADRESH,F ; /2 | |
| 403 rrcf ADRESL,W | |
| 604 | 404 ; add to o2_mv_sensor2:2 |
| 582 | 405 addwf o2_mv_sensor2+0,F |
| 406 movf ADRESH,W | |
| 407 addwfc o2_mv_sensor2+1,F | |
| 604 | 408 ; divide by 2 |
| 582 | 409 bcf STATUS,C |
| 410 rrcf o2_mv_sensor2+1,F ; /2 | |
| 411 rrcf o2_mv_sensor2+0,F | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
412 |
| 582 | 413 movlw HIGH ignore_mv |
| 604 | 414 cpfsgt o2_mv_sensor2+1 ; > ignore_mv ? |
| 415 bra get_analog_inputs3a ; NO | |
| 416 ; YES - ignore this reading | |
| 582 | 417 clrf o2_mv_sensor2+1 |
| 418 clrf o2_mv_sensor2+0 | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
419 get_analog_inputs3a: |
| 604 | 420 ; ignore 1.9 mV noise for not-connected inputs |
| 421 tstfsz o2_mv_sensor2+1 ; > 25.5 mV ? | |
| 422 bra get_analog_inputs3 ; YES - skip here | |
| 582 | 423 movlw .19 |
| 604 | 424 cpfsgt o2_mv_sensor2+0 ; > 1.9 mV ? |
| 425 clrf o2_mv_sensor2+0 ; NO - clear result | |
|
187
669b5d00706d
CHANGE: Longer timeout (4 min) for calibration menu
heinrichsweikamp
parents:
158
diff
changeset
|
426 get_analog_inputs3: |
| 582 | 427 movlw b'00101001' ; power on ADC, select AN10 |
| 428 rcall wait_adc | |
| 429 bcf STATUS,C | |
| 430 rrcf ADRESH,F ; /2 | |
| 431 rrcf ADRESL,W | |
| 604 | 432 ; add to o2_mv_sensor3:2 |
| 582 | 433 addwf o2_mv_sensor3+0,F |
| 434 movf ADRESH,W | |
| 435 addwfc o2_mv_sensor3+1,F | |
| 604 | 436 ; divide by 2 |
| 582 | 437 bcf STATUS,C |
| 438 rrcf o2_mv_sensor3+1,F ; /2 | |
| 439 rrcf o2_mv_sensor3+0,F | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
440 |
| 582 | 441 movlw HIGH ignore_mv |
| 604 | 442 cpfsgt o2_mv_sensor3+1 ; > ignore_mv ? |
| 443 bra get_analog_inputs4a ; NO | |
| 444 ; YES - ignore this reading | |
| 582 | 445 clrf o2_mv_sensor3+1 |
| 446 clrf o2_mv_sensor3+0 | |
|
196
a0e0ddfc1b49
suppress ghost readings for long, open cables
heinrichsweikamp
parents:
189
diff
changeset
|
447 get_analog_inputs4a: |
| 604 | 448 ; ignore 1.9mV noise for not-connected inputs |
| 449 tstfsz o2_mv_sensor3+1 ; > 25.5 mV ? | |
| 450 bra get_analog_inputs4 ; YES - skip here | |
| 582 | 451 movlw .19 |
| 604 | 452 cpfsgt o2_mv_sensor3+0 ; > 1.9 mV ? |
| 453 clrf o2_mv_sensor3+0 ; NO - clear result | |
|
187
669b5d00706d
CHANGE: Longer timeout (4 min) for calibration menu
heinrichsweikamp
parents:
158
diff
changeset
|
454 get_analog_inputs4: |
| 582 | 455 bcf ADCON0,0 ; power off ADC |
| 604 | 456 bcf adc_running ; =1: the ADC is in use |
| 582 | 457 return |
| 0 | 458 |
| 604 | 459 global piezo_config ; set up piezo sensitivity of heinrichs weikamp piezo buttons (~30ms) |
| 460 piezo_config: ; settings between 20 and 200 | |
| 582 | 461 clrf TMR5H |
| 462 clrf TMR5L ; ~2sec | |
| 604 | 463 bcf PIR5,TMR5IF ; clear flag |
| 582 | 464 bcf switch_right |
| 465 bcf switch_left | |
|
416
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
466 piezo_config0: |
|
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
467 btfsc switch_right |
| 582 | 468 bra piezo_config |
|
416
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
469 btfsc switch_left |
| 604 | 470 bra piezo_config ; restart on button press |
| 582 | 471 |
|
416
4389fe9673b2
NEW: Support for new logbook memory chip (minor hardware change)
heinrichsweikamp
parents:
357
diff
changeset
|
472 btfss PIR5,TMR5IF |
| 604 | 473 bra piezo_config0 ; wait loop |
| 468 | 474 |
| 582 | 475 bcf INTCON,GIE |
| 604 | 476 |
| 582 | 477 movff opt_cR_button_right,WREG ; right button |
| 478 btfsc flip_screen ; 180° rotation ? | |
| 604 | 479 movff opt_cR_button_left,WREG ; YES - left button |
| 582 | 480 rcall piezo_config_tx |
|
343
34e2f5bdc5a2
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
heinrichsweikamp
parents:
275
diff
changeset
|
481 |
| 582 | 482 movff opt_cR_button_left,WREG ; left button |
| 483 btfsc flip_screen ; 180° rotation ? | |
| 604 | 484 movff opt_cR_button_right,WREG ; YES - right button |
| 582 | 485 rcall piezo_config_tx |
|
343
34e2f5bdc5a2
BUGFIX: Rotate button sensitivity with screen (OSTC 2 and cR)
heinrichsweikamp
parents:
275
diff
changeset
|
486 |
| 582 | 487 movlw .20 ; reserved |
| 488 rcall piezo_config_tx | |
| 489 movlw .20 ; reserved | |
| 490 rcall piezo_config_tx | |
| 604 | 491 |
| 582 | 492 bsf INTCON,GIE |
| 493 return | |
| 204 | 494 |
| 582 | 495 piezo_config_tx: ; send one byte |
| 496 movwf lo ; store byte | |
| 497 movlw .8 | |
| 498 movwf hi ; bit counter | |
| 499 bcf TX3_PIEZO_CFG ; start bit | |
| 500 rcall piezo_config_wait_bit | |
| 113 | 501 piezo_config_tx_loop: |
| 582 | 502 btfss lo,0 ; LSB first |
| 503 bcf TX3_PIEZO_CFG | |
| 504 btfsc lo,0 ; LSB first | |
| 505 bsf TX3_PIEZO_CFG | |
| 506 rcall piezo_config_wait_bit | |
| 507 rrncf lo,F | |
| 508 decfsz hi,F | |
| 509 bra piezo_config_tx_loop | |
| 510 bsf TX3_PIEZO_CFG ; stop bit | |
| 511 rcall piezo_config_wait_bit | |
| 512 return | |
| 113 | 513 |
| 514 piezo_config_wait_bit: | |
| 582 | 515 setf TMR5H |
| 516 movlw .255-.26 ; 26 x 31,5µs = 819us | |
| 113 | 517 movwf TMR5L |
| 604 | 518 bcf PIR5,TMR5IF ; clear flag |
| 113 | 519 piezo_config_wait_bit3: |
| 582 | 520 btfss PIR5,TMR5IF |
| 604 | 521 bra piezo_config_wait_bit3 ; wait loop |
| 113 | 522 return |
| 523 | |
| 582 | 524 global reset_battery_pointer |
| 604 | 525 reset_battery_pointer: ; reset battery pointer 0x07-0x0C and battery_gauge:5 |
| 582 | 526 extern lt2942_charge_done |
| 604 | 527 btfsc battery_gauge_available ; something to reset? |
| 528 call lt2942_charge_done ; YES - reset accumulating registers to 0xFFFF | |
| 582 | 529 goto reset_battery_internal_only ; and return |
| 530 | |
| 531 | |
| 532 global get_analog_switches | |
| 604 | 533 get_analog_switches: ; start ADC and wait until finished |
| 534 btfsc analog_switches ; does the OSTC have analog switches? | |
| 535 bra get_analog_switches2 ; YES | |
| 536 ; NO | |
| 537 bcf analog_sw1_pressed ; NO - clear flag for analog switch 1 | |
| 538 bcf analog_sw2_pressed ; - clear flag for analog switch 2 | |
| 539 return ; - done | |
| 582 | 540 get_analog_switches2: |
| 541 btfsc adc_running ; ADC in use? | |
| 604 | 542 return ; YES - abort |
| 543 ; NO | |
| 582 | 544 movlw b'00001001' ; left justified |
| 545 movwf ADCON2 | |
| 546 ; movlw b'00000000' ; Vref+ = Vdd | |
| 547 clrf ADCON1 | |
| 548 movlw b'00100101' ; power on ADC, select AN9 | |
| 549 rcall wait_adc | |
| 550 banksel analog_counter | |
| 551 movff ADRESH,WREG | |
| 552 addwf analog_sw2_raw+0 | |
| 553 movlw .0 | |
| 554 addwfc analog_sw2_raw+1 | |
| 555 decfsz analog_counter,F ; continue averaging? | |
| 604 | 556 bra get_analog_switches2a ; YES |
| 557 ; NO - done, compute average | |
| 582 | 558 bcf STATUS,C |
| 559 rrcf analog_sw2_raw+1 | |
| 560 rrcf analog_sw2_raw+0 ; /2 | |
| 561 bcf STATUS,C | |
| 562 rrcf analog_sw2_raw+1 | |
| 563 rrcf analog_sw2_raw+0 ; /4 | |
| 564 bcf STATUS,C | |
| 565 rrcf analog_sw2_raw+1 | |
| 566 rrcf analog_sw2_raw+0 ; /8 | |
| 567 bcf STATUS,C | |
| 568 rrcf analog_sw2_raw+1 | |
| 569 rrcf analog_sw2_raw+0 ; /16 | |
| 570 movff analog_sw2_raw+0,analog_sw2 | |
| 571 clrf analog_sw2_raw+1 | |
| 604 | 572 clrf analog_sw2_raw+0 ; reset average registers |
| 582 | 573 ; movlw .16 |
| 574 ; movwf analog_counter ; only once... | |
| 575 get_analog_switches2a: | |
| 576 banksel common | |
| 577 bcf analog_sw2_pressed | |
| 604 | 578 movff opt_cR_button_left,WREG ; 20-100 |
| 582 | 579 bcf STATUS,C |
| 604 | 580 rrcf WREG ; /2 -> 10-50 |
| 582 | 581 bcf STATUS,C |
| 604 | 582 rrcf WREG ; /2 -> 5-25 |
| 583 decf WREG,W ; -1 | |
| 584 decf WREG,W ; -1 | |
| 585 decf WREG,W ; -1 -> 2-22 | |
| 582 | 586 banksel analog_sw2 |
| 604 | 587 btfss button_polarity,1 ; (1= normal, 0=inverted) |
| 582 | 588 bra sw2_inverted |
| 589 addwf analog_sw2,W ; average (~128) | |
| 590 cpfsgt ADRESH | |
| 591 bra get_analog_sw1 | |
| 592 banksel common | |
| 604 | 593 bsf analog_sw2_pressed ; left button normal |
| 582 | 594 bra get_analog_sw1 |
| 475 | 595 sw2_inverted: |
| 582 | 596 subwf analog_sw2,W ; average (~128) |
| 597 cpfslt ADRESH | |
| 598 bra get_analog_sw1 | |
| 599 banksel common | |
| 604 | 600 bsf analog_sw2_pressed ; left button inverted |
| 448 | 601 get_analog_sw1: |
| 582 | 602 banksel common |
| 603 movlw b'00101001' ; power on ADC, select AN10 | |
| 604 rcall wait_adc | |
| 605 banksel analog_counter | |
| 606 movff ADRESH,WREG | |
| 607 addwf analog_sw1_raw+0 | |
| 608 movlw .0 | |
| 609 addwfc analog_sw1_raw+1 | |
| 610 tstfsz analog_counter ; continue averaging? | |
| 604 | 611 bra get_analog_switches1a ; YES |
| 612 ; NO - done, compute average | |
| 582 | 613 bcf STATUS,C |
| 614 rrcf analog_sw1_raw+1 | |
| 615 rrcf analog_sw1_raw+0 ; /2 | |
| 616 bcf STATUS,C | |
| 617 rrcf analog_sw1_raw+1 | |
| 618 rrcf analog_sw1_raw+0 ; /4 | |
| 619 bcf STATUS,C | |
| 620 rrcf analog_sw1_raw+1 | |
| 621 rrcf analog_sw1_raw+0 ; /8 | |
| 622 bcf STATUS,C | |
| 623 rrcf analog_sw1_raw+1 | |
| 624 rrcf analog_sw1_raw+0 ; /16 | |
| 625 movff analog_sw1_raw+0,analog_sw1 | |
| 626 clrf analog_sw1_raw+1 | |
| 604 | 627 clrf analog_sw1_raw+0 ; reset average registers |
| 582 | 628 movlw .16 |
| 629 movwf analog_counter ; only once... | |
| 630 get_analog_switches1a: | |
| 631 banksel common | |
| 632 bcf analog_sw1_pressed | |
| 604 | 633 movff opt_cR_button_right,WREG ; 20-100 |
| 582 | 634 bcf STATUS,C |
| 604 | 635 rrcf WREG ; /2 -> 10-50 |
| 582 | 636 bcf STATUS,C |
| 604 | 637 rrcf WREG ; /2 -> 5-25 |
| 638 decf WREG,W ; -1 | |
| 639 decf WREG,W ; -1 | |
| 640 decf WREG,W ; -1 -> 2-22 | |
| 582 | 641 banksel analog_sw1 |
| 604 | 642 btfss button_polarity,0 ; (1= normal, 0=inverted) |
| 582 | 643 bra sw1_inverted |
| 644 addwf analog_sw1,W ; average (~128) | |
| 645 cpfsgt ADRESH | |
| 646 bra get_analog_sw_done | |
| 647 banksel common | |
| 648 bsf analog_sw1_pressed ; right button normal | |
| 649 bra get_analog_sw_done | |
| 475 | 650 sw1_inverted: |
| 582 | 651 subwf analog_sw1,W ; average (~128) |
| 652 cpfslt ADRESH | |
| 653 bra get_analog_sw_done | |
| 654 banksel common | |
| 655 bsf analog_sw1_pressed ; right button inverted | |
| 448 | 656 get_analog_sw_done: |
| 582 | 657 banksel common |
| 604 | 658 movlw b'10001101' ; restore to right justified |
| 582 | 659 movwf ADCON2 |
| 660 btfsc analog_sw1_pressed | |
| 661 return | |
| 662 btfsc analog_sw2_pressed | |
| 663 return | |
| 604 | 664 setf TMR1H ; no button pressed, enhance timer1 to overflow quickly |
| 582 | 665 return |
| 448 | 666 |
| 0 | 667 END |