Mercurial > public > hwos_code
annotate src/hwos.asm @ 596:2b4e02a9c1e4
italian update
author | heinrichsweikamp |
---|---|
date | Tue, 03 Jul 2018 09:49:34 +0200 |
parents | 69a98f3f3b84 |
children | ca4556fb60b9 |
rev | line source |
---|---|
0 | 1 ;============================================================================= |
2 ; | |
275 | 3 ; File hwos.asm |
0 | 4 ; |
275 | 5 ; Definition of the hwOS dive computer platform. |
0 | 6 ; |
7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
8 ;============================================================================= | |
9 ; HISTORY | |
10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code. | |
11 ; 2011-06-24 : [MH] Added clock speeds. | |
275 | 12 #include "hwos.inc" |
0 | 13 |
14 ;============================================================================= | |
15 ;----------------------------- CONFIG --------------------------------- | |
1 | 16 CONFIG RETEN = OFF ;Disabled - Controlled by SRETEN bit |
17 CONFIG SOSCSEL = HIGH ;High Power SOSC circuit selected | |
199 | 18 CONFIG XINST = OFF ;Code won't excute in extended mode... |
1 | 19 CONFIG FOSC = INTIO2 ;Internal RC oscillator, no clock-out |
20 CONFIG PLLCFG = OFF | |
21 CONFIG IESO = OFF ;Disabled | |
22 CONFIG PWRTEN = OFF ;Disabled, because incompatible with ICD3 (Ri-400) | |
23 CONFIG BOREN = ON ;Controlled with SBOREN bit | |
24 CONFIG BORV = 2 ;2.0V | |
25 CONFIG BORPWR = MEDIUM ;BORMV set to medium power level | |
26 CONFIG WDTEN = ON ;WDT controlled by SWDTEN bit setting | |
27 CONFIG WDTPS = 128 ;1:128 | |
28 CONFIG RTCOSC = SOSCREF ;RTCC uses SOSC | |
29 CONFIG MCLRE = ON ;MCLR Enabled, RG5 Disabled | |
30 CONFIG CCP2MX = PORTBE ;RE7-Microcontroller Mode/RB3-All other modes | |
0 | 31 ;============================================================================= |
32 boot CODE | |
275 | 33 global init_ostc |
0 | 34 |
275 | 35 init_ostc: |
0 | 36 banksel common ; Bank1 |
37 ;init oscillator | |
38 movlw b'01110010' | |
39 movwf OSCCON ; 16MHz INTOSC | |
40 movlw b'00001000' | |
41 movwf OSCCON2 ; Secondary Oscillator running | |
42 movlw b'00000000' | |
43 movwf OSCTUNE ; 4x PLL Disable (Bit6) - only works with 8 or 16MHz (=32 or 64MHz) | |
44 bcf RCON,SBOREN ; Bown-Out off | |
45 bcf RCON,IPEN ; Priority Interrupts off | |
209 | 46 clrf CM1CON ; Disable |
199 | 47 banksel WDTCON |
48 movlw b'10000000' | |
49 movwf WDTCON ; Setup Watchdog | |
0 | 50 |
51 ; I/O Ports | |
52 banksel 0xF16 ; Addresses, F16h through F5Fh, are also used by SFRs, but are not part of the Access RAM. | |
53 | |
54 clrf REFOCON ; No reference oscillator active on REFO pin | |
55 clrf ODCON1 ; Disable Open Drain capability | |
56 clrf ODCON2 ; Disable Open Drain capability | |
57 clrf ODCON3 ; Disable Open Drain capability | |
209 | 58 clrf CM2CON ; Disable |
59 clrf CM3CON ; Disable | |
0 | 60 |
61 movlw b'11000000' ; ANSEL, AN7 and AN6 -> Analog inputs, PORTA is digital. | |
62 movwf ANCON0 | |
113 | 63 movlw b'00000111' ; ANSEL, AN8, AN9, AN10 -> Analog in |
0 | 64 movwf ANCON1 |
65 movlw b'00000010' ; ANSEL, AN17 -> Analog input | |
66 movwf ANCON2 | |
67 | |
68 banksel common | |
69 | |
448 | 70 ; movlw b'00000000' ; 1= Input -> Data TFT_high |
71 clrf TRISA | |
72 ; movlw b'00000000' ; Init port | |
73 clrf PORTA | |
0 | 74 |
113 | 75 movlw b'00000011' ; 1= Input, (RB0, RB1) -> Switches, RB2 -> Power_MCP, RB3 -> s8_npower, RB4 -> LED_green, RB5 -> /TFT_POWER |
0 | 76 movwf TRISB |
113 | 77 movlw b'00101000' ; Init port |
0 | 78 movwf PORTB |
79 | |
80 movlw b'10011010' ; 1= Input, (RC0, RC1) -> SOSC, RC2 -> TFT_LED_PWM, (RC3,RC4) -> I²C, RC5 -> MOSI_MS5541, (RC6, RC7) -> UART1 | |
81 movwf TRISC | |
448 | 82 ; movlw b'00000000' ; Init port |
83 clrf PORTC | |
0 | 84 |
85 movlw b'00100000' ; 1= Input, RD0 -> TFT_NCS, RD1 -> TFT_RS, RD2 -> TFT_NWR, RD3 -> TFT_RD, RD4 -> MOSI_Flash, RD5 -> MISO_Flash, RD6 -> CLK_Flash, RD7 -> TFT_NRESET | |
86 movwf TRISD | |
448 | 87 ; movlw b'00000000' ; Init port |
88 clrf PORTD | |
0 | 89 |
448 | 90 ; movlw b'00000000' ; 1= Input, RE1 -> Power_IR, RE2 -> CS_MCP, RE3 -> LED_blue, RE4 -> power_sw1, RE5 -> Set to 1 for cR hardware |
91 clrf TRISE | |
209 | 92 movlw b'00110001' ; Init port |
0 | 93 movwf PORTE |
94 | |
209 | 95 movlw b'01111110' ; 1= Input, (RF1, RF2, RF3, RF4, RF5) -> Analog |
0 | 96 movwf TRISF |
448 | 97 ; movlw b'00000000' ; Init port |
98 clrf PORTF | |
0 | 99 |
113 | 100 movlw b'00001110' ; 1= Input, <7:6> not implemented, RG0 -> TX3_PIEZO_CFG, RG2 -> RX2, RG3 -> AN17_RSSI, RG4 -> SOSC_OUT, RG5 -> /RESET |
0 | 101 movwf TRISG |
113 | 102 movlw b'00000001' ; Init port |
0 | 103 movwf PORTG |
104 | |
448 | 105 ; movlw b'00000000' ; 1= Input -> Data TFT_low |
106 clrf TRISH | |
107 ; movlw b'00000000' ; Init port | |
108 clrf PORTH | |
0 | 109 |
120 | 110 movlw b'10011011' ; 1= Input, RJ4 -> vusb_in, RJ5 -> power_sw2, RJ6 -> CLK_MS5541, RJ7 -> MISO_MS5541 |
0 | 111 movwf TRISJ |
112 movlw b'00100000' ; Init port | |
113 movwf PORTJ | |
114 | |
115 | |
116 ; Timer 0 | |
28 | 117 movlw b'00000001' ; Timer0 with 1:4 prescaler |
0 | 118 movwf T0CON |
119 | |
120 ; Timer 1 - Button hold-down timer | |
121 movlw b'10001100' ; 32768Hz clock source, 1:1 Prescaler -> ; 30,51757813µs/bit in TMR1L:TMR1H | |
122 movwf T1CON | |
123 | |
124 banksel 0xF16 ; Addresses, F16h through F5Fh, are also used by SFRs, but are not part of the Access RAM. | |
125 | |
126 ; RTCC | |
127 movlw 0x55 | |
128 movwf EECON2 | |
129 movlw 0xAA | |
130 movwf EECON2 | |
131 bsf RTCCFG,RTCWREN ; Unlock sequence for RTCWREN | |
132 bsf RTCCFG,RTCPTR1 | |
133 bsf RTCCFG,RTCPTR0 | |
134 bsf RTCCFG,RTCEN ; Module enable | |
135 bsf RTCCFG,RTCOE ; Output enable | |
136 movlw b'00000100' ; 32768Hz SOCS on RTCC pin (PORTG,4) Bit7-5: Pullups for Port D, E and J | |
137 movwf PADCFG1 | |
138 movlw b'11000100' | |
139 movwf ALRMCFG ; 1 second alarm | |
140 movlw d'1' | |
141 movwf ALRMRPT ; Alarm repeat counter | |
142 movlw 0x55 | |
143 movwf EECON2 | |
144 movlw 0xAA | |
145 movwf EECON2 | |
146 bcf RTCCFG,RTCWREN ; Lock sequence for RTCWREN | |
147 | |
148 banksel common | |
149 ; A/D Converter | |
150 movlw b'00011000' ; power off ADC, select AN6 | |
151 movwf ADCON0 | |
152 movlw b'00100000' ; 2.048V Vref+ | |
153 movwf ADCON1 | |
154 movlw b'10001101' ; Right justified | |
155 movwf ADCON2 | |
156 | |
157 | |
158 ;init serial port1 (TRISC6/7) | |
159 movlw b'00001000' ; BRG16=1 | |
160 movwf BAUDCON1 | |
161 movlw .34 ; SPBRGH:SPBRG = .34 : 114285 BAUD @ 16MHz (+0,79% Error to 115200 BAUD) | |
162 movwf SPBRG1 ; SPBRGH:SPBRG = .207 : 19230 BAUD @ 16MHz (-0,16% Error to 19200 BAUD) | |
163 clrf SPBRGH1 ; | |
204 | 164 |
165 clrf RCSTA1 | |
166 clrf TXSTA1 ; UART disable | |
167 bcf PORTC,6 ; TX hard to GND | |
0 | 168 |
169 ;init serial port2 (TRISG2) | |
170 banksel BAUDCON2 | |
113 | 171 movlw b'00100000' ; BRG16=0 ; inverted for IR |
0 | 172 movwf BAUDCON2 |
173 movlw b'00100000' ; BRGH=0, SYNC=0 | |
174 movwf TXSTA2 | |
175 movlw .102 ; SPBRGH:SPBRG = .102 : 2403 BAUD @ 16MHz | |
176 movwf SPBRG2 | |
177 clrf SPBRGH2 | |
178 movlw b'10010000' | |
179 movwf RCSTA2 | |
180 banksel common | |
181 | |
182 ; Timer3 for IR-RX Timeout | |
183 clrf T3GCON ; Reset Timer3 Gate Control register | |
184 movlw b'10001001' ; 1:1 Prescaler -> 2seconds@32768Hz, synced | |
185 ; 30,51757813µs/bit in TMR3L:TMR3H | |
186 movwf T3CON | |
187 | |
188 ; SPI Module(s) | |
189 ; SPI2: External Flash | |
190 movlw b'00110000' | |
191 movwf SSP2CON1 | |
448 | 192 ; movlw b'00000000' |
193 clrf SSP2STAT | |
0 | 194 ; ->0,25MHz Bit clock @1MHz mode (Eco) |
195 ; -> 4MHz Bit clock @16MHz mode (Normal) | |
196 ; -> 16MHz Bit clock @64MHz mode (Fastest) | |
197 | |
198 ; MSSP1 Module: I2C Master | |
199 movlw b'00101000' ; I2C Master Mode | |
200 movwf SSP1CON1 | |
448 | 201 ; movlw b'00000000' |
202 clrf SSP1CON2 | |
0 | 203 movlw 0x27 |
204 movwf SSP1ADD ; 100kHz @ 16MHz Fosc | |
205 | |
206 ; PWM Module(s) | |
207 ; PWM1 for LED dimming | |
208 movlw b'00001100' | |
209 movwf CCP1CON | |
210 movlw b'00000001' | |
211 movwf PSTR1CON ; Pulse steering disabled | |
212 movlw d'255' | |
213 movwf PR2 ; Period | |
214 ; 255 is max brightness (300mW) | |
215 clrf CCPR1L ; Duty cycle | |
216 clrf CCPR1H ; Duty cycle | |
217 movlw T2CON_NORMAL | |
218 movwf T2CON | |
219 | |
220 ; Timer5 for ISR-independent wait routines | |
221 clrf T5GCON ; Reset Timer5 Gate Control register | |
222 movlw b'10001001' ; 1:1 Prescaler -> 2seconds@32768Hz, synced | |
223 ; 30,51757813µs/bit in TMR5L:TMR5H | |
224 movwf T5CON | |
225 | |
226 ; Timer7 for 62,5ms Interrupt (Sensor states) | |
227 banksel 0xF16 ; Addresses, F16h through F5Fh, are also used by SFRs, but are not part of the Access RAM. | |
228 clrf T7GCON ; Reset Timer7 Gate Control register | |
229 movlw b'10001001' ; 1:1 Prescaler -> 2seconds@32768Hz, synced | |
230 movwf T7CON | |
231 clrf TMR7L | |
232 movlw .248 | |
233 movwf TMR7H ; -> Rollover after 2048 cycles -> 62,5ms | |
234 | |
235 banksel common | |
236 ; Interrupts | |
50 | 237 movlw b'11010000' |
0 | 238 movwf INTCON |
77
131e6dd9e201
BUGFIX: Potential bug to freeze the OSTC3 after battery change or update
heinrichsweikamp
parents:
58
diff
changeset
|
239 movlw b'00001000' ; BIT7=1: Pullup for PORTB disabled |
0 | 240 movwf INTCON2 |
77
131e6dd9e201
BUGFIX: Potential bug to freeze the OSTC3 after battery change or update
heinrichsweikamp
parents:
58
diff
changeset
|
241 movlw b'00000000' |
0 | 242 movwf INTCON3 |
243 movlw b'00000001' ; Bit0: TMR1 | |
244 movwf PIE1 | |
245 movlw b'00000010' ; Bit1: TMR3 | |
246 movwf PIE2 | |
247 movlw b'00000000' ; Bit1: TMR5 | |
248 movwf PIE5 | |
249 movlw b'00100001' ; Bit0: RTCC, Bit5: UART2 | |
250 movwf PIE3 | |
251 movlw b'00001000' ; Bit3: TMR7 | |
252 movwf PIE5 | |
253 | |
501 | 254 bsf power_sw1 |
255 btfss power_sw1 | |
256 bra $-4 | |
257 bsf power_sw2 | |
258 btfss power_sw2 | |
259 bra $-4 | |
0 | 260 |
204 | 261 movlw d'2' |
319 | 262 movff WREG,speed_setting ; Normal |
204 | 263 |
264 | |
0 | 265 return |
266 | |
267 ;============================================================================= | |
268 global speed_eco | |
269 speed_eco: | |
270 movlw d'1' | |
271 movff WREG,speed_setting ; Bank-independent | |
272 ; Done in ISR | |
273 return | |
274 ;============================================================================= | |
275 global speed_normal | |
276 speed_normal: | |
277 movlw d'2' | |
278 movff WREG,speed_setting ; Bank-independent | |
279 ; Done in ISR | |
280 return | |
281 ;============================================================================= | |
282 global speed_fastest | |
283 speed_fastest: | |
284 movlw d'3' | |
285 movff WREG,speed_setting ; Bank-independent | |
286 ; Done in ISR | |
287 return | |
288 ;============================================================================= | |
289 | |
290 END |